No update server found for context :e:

i have sap netweaver 7.0 abap trial version on my machine. i have navigated to se80 and write a program while walking with this weblog :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6270 [original link is broken] [original link is broken] [original link is broken]
the program is called z_hello_world_local :
REPORT Z_HELLO_WORLD_LOCAL.
data output_text type string.
output_text = 'Hello World'.
write output_text. "obsolete statement
any way when i have tried to save or run the program it returns the error:
no update server found for context :e:
also i must say that <u><b>when i clicked the as abap wp table, on sapmmc, the work processes like dia, upd, enq, btc, spo seem not to be worked ("no" in the line under start title). only the first dia works (it has a yes under start)</b></u> what can i do for this second problem?
any ideas?
thanks
Edited by: developer developer on Aug 23, 2008 5:40 PM
Edited by: developer developer on Aug 23, 2008 6:26 PM
Edited by: developer developer on Aug 24, 2008 10:06 AM

I came trough the same problem...This forum post might help you -;)
[Software Downloads;
Transaction SM13 is the key -;)
Greetings,
Blag.

Similar Messages

Error - No update server found for context

Hi
I'm trying to write a BSP page that sends E-mail via sap connect.
I did try to get the demo program bsptutorialmail from package SBSP_DOCU to work.
When I try to send an E-mail, the program terminates with
500 SAP Internal Server Error
Error message: No update server found for context :b: ( type of termination: ABORT_MESSAGE_STATE )
I can in my system send e-mail from a standard program using the function Z_E_KEG_SEND_SIMPLE_EMAIL that I found in a weblog here on sdn
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
I have not been able to find any info on this error, just a hint that I need to configure some RFC destination ?
Any hints on how to solve this are very much appreciated

I found nearly that exact same error message in an old MM OSS note - 333941. The error message there was in ME47:Termntn A:No update server found for context:X. Now that was context:X and not context:b like in your error, but perhaps the solution then will lead you to some clues. The following were the code changes of that OSS note:
Delete Block
    SET LOCALE LANGUAGE EKKO-SPRAS.            "CF 4.5A TODO
    XEINA-SORTL = XEKPO-TXZ01.
Insert Block
    DATA: S_LANGU LIKE SY-LANGU.
    S_LANGU = SY-LANGU.
    SET LOCALE LANGUAGE EKKO-SPRAS.                         "149717
    TRANSLATE XEINA-SORTL TO UPPER CASE.                    "149717
    SET LOCALE LANGUAGE S_LANGU.
On one hand this correction might be telling us that this error has something to do with language, or more specifically the act of not returning the local language to the logon language. On the other hand, maybe it is just leading us on a wild goose chase.
Message was edited by: Thomas Jung

HT1414 no update server found? is it done?

No update server found. Is the ipad done ? Shows apple logo,turns on and off but won't open up.

That indicates the update failed. You'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. (Restoring it will update it.)

Security lending no update types found for prod. type 77B, trans.type 100

Hello
In FTR_CREATE for product type 77B Open-Ended Securities lending I get following error:
No update types found for prod. type 77B, trans. type 100, sec.acct cat.
Message no. TRS0835
how do I solve this?
regards
Arjan
Edited by: Arjan Hogenes on Dec 8, 2009 6:51 PM
I have in customizing in "Update types for position update" for product type 77B, transaction type 100:
Product Type    77B   Open-Ended Securities Lending
Transactn Type 100   Loan
Update Type for Open                      SL1990-
Update Type for Close                     SL1992+
Update Type for Underlying / Exercise     OTC003
Edited by: Arjan Hogenes on Dec 8, 2009 6:55 PM
Edited by: Arjan Hogenes on Dec 8, 2009 6:58 PM

Prasad,
I followed your instructions and changed customization for Update type for Position Update type with standard Update types;
OTC001
OTC002
OTC003
but I still get the same error.
In TRM-Trans Mgr-OTC Derivatives-Transaction Mgt-Update Type-Assign FLows type to Update Types
I have:
6 Derivatives     1990     Securities Lending: Basis Flow     - Outflow     SL1990-     Securities Lending: Basis Flow
6 Derivatives     1991     Sec. Lending: Lending Revenue     + Inflow     SL1991+     Securities Lending: Lending Revenue
6 Derivatives     1992     Sec. Lending: Reverse Posting     + Inflow     SL1992+     Securities Lending: Reverse Posting
6 Derivatives     1993     Securities Lending: Agent Fee     - Outflow     SL1993-     Securities Lending: Agent Fee
6 Derivatives     1994     Sec.Lending: Cash Collateral     + Inflow     SL1994+     Securities Lending: Cash Collateral Inflow
6 Derivatives     1994     Sec.Lending: Cash Collateral     - Outflow     SL1994-     Securities Lending: Cash Collateral Outflow
In TRM-Trans Mgr-Listed Derivatives-Transaction Mgt-Flow Type-Assign FLows type to Transaction Type
I have
77B     Open-Ended Securities Lending     100     Loan     1990
77B     Open-Ended Securities Lending     100     Loan     1991
77B     Open-Ended Securities Lending     100     Loan     1992
77B     Open-Ended Securities Lending     100     Loan     1993
77B     Open-Ended Securities Lending     100     Loan     1994
77B     Open-Ended Securities Lending     100     Loan     1995
Any other suggestion for the error "No update types found for prod. type 77B, trans. type 100, sec.acct cat.
Message no. TRS0835"?
many thanks in advance. I Look forward to your answer!
kr
Arjan

Is ther an Apple software update server solution for a Microsoft environment?

My organization has more than 3000 Apple devices. Im trying to centralize mac sotware updates without adding a mac box. We are a Windows Server 2012 R2 environment. Thanks for all the help.

No, but there is a Linux one:
http://signalboxes.net/mac2linux/reposado-apple-software-update-server/

OVMAPI_3511E No server found for creating pool file system on lun at server

Hi,
I have a IBM Blade Center with 2 server for virtual and 1 server for vm manager and a storage IBM DS3524 connect at blade on sas cable.
The storage have 2 LUN, one 15Gb for poll and the rest for vm.
I see the LUN in storage (unmanaged fibre chanel storage array) but I can not define acces group..

Hi,
below I pos the multipath list command from one server; same thing on another server,
but in VM Manager 3.0.1 in server view, physical disk is not listed.
[root@IBML3 ~]# multipath -ll
360080e500023aa480000160f4e6f9b93 dm-0 IBM,1746      FAStT
size=15G features='3 queue_if_no_path pg_init_retries 50' hwhandler='1 rdac' wp=rw
|-+- policy='round-robin 0' prio=6 status=active
| `- 0:0:1:0 sdb 8:16 active ready running
`-+- policy='round-robin 0' prio=1 status=enabled
`- 0:0:2:0 sdd 8:48 active ghost running
360080e500023b6f00000041a4e6f9bb0 dm-1 IBM,1746      FAStT
size=1.4T features='3 queue_if_no_path pg_init_retries 50' hwhandler='1 rdac' wp=rw
|-+- policy='round-robin 0' prio=6 status=active
| `- 0:0:2:1 sde 8:64 active ready running
`-+- policy='round-robin 0' prio=1 status=enabled
`- 0:0:1:1 sdc 8:32 active ghost running
[root@IBML3 ~]#
[root@IBML1 ~]# cat /proc/partitions
major minor #blocks name
   8       16   15728640 sdb
   8       32 1555580321 sdc
   8        0   48848184 sda
   8        1     104391 sda1
   8        2    3148740 sda2
   8        3    1052257 sda3
253        0   15728640 dm-0
253        1 1555580321 dm-1Edited by: rukbat on Sep 13, 2011 8:09 AM
Moderator Action:
Place your excerpt or anything you need to preserve formatting, into "code" tags. To do that you would use the word `code` inside curly brackets.
This is your post. You can click EDIT to peek at how it was done ( then click CANCEL to exit the editing mode).
Edited by: Florin Cercelaru on Sep 13, 2011 5:21 PM

Constantly requests a newer version, yet no update is found for apps/music/videos/etc??

second generation iTouch, itunes being run on an early but up to date version of windows vista. the ipod will not sync apps because it requires the "iPhone 3.0 software update". i've searched for it, and it seemingly doesn't exist... help?

Hi. Check the link below.
http://support.apple.com/kb/HT2052
Stedman

Where to find the updated server for 10.3?

I searched yesterday the Apple's download site with the updated server version for 10.3, but could not find it.
Anyone have the link to this?

The server version I am referring to in like the VNC server part.
When you go to System preferences and enable screen sharing it is a "server like" process running in the background.
The updated version for 10.3 enable VNC's client to connect to 10.3 host, and from what I can see, it does the same for 10.5 screen sharing capability. That is what I lost when I reinstalled my 10.3 machine: file sharing is working fine, but no screen share available...

Not able to contact iphone update server

not able to contact update server.. for iphone latest update. the message "contacting the iphone software update server" remains forever nothing happens

Refer this article:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814

Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.

Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

LIBOVD ERROR - "validateContextToken: workflow session was not found for given context. Create a new workflow session with token"

Hello everyone,
I have the following scenario:
We're using "Oracle SOA Suite 11g 11.1.1.7.0" (Patched w/ 17893896) mainly for a BPM/Human workflow composite. Former, we were having the error bellow:
<Mar 16, 2015 1:13:03 PM BRT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Verification Service cannot resolve user identity. User weblogic cannot be found in the identity repository. Workflow Context token cannot be null in request.
ORABPEL-30511
When that error ocurred, no one was able to use the system (BPM/Human Workflow).
I opened an SR, and after some analysis from the support, it recommended me to set up "virtualize=true" in EM, and restarting the domain. Then it started logging the following:
connection to ldap://[10.200.10.57]:7001 as cn=Admin.
javax.naming.NamingException: No LDAP connection available to process request for DN: cn=Admin.
Looking up on support KB, I found this note Doc ID 1545680.1 and increased from Max size of Connection Pool 10 to 200. That did work successfully! Problem now is that the <SERVER>_diagnostic.log is being filled up with the following error:
[2015-03-31T16:03:46.421-03:00] [soa_server2] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e0194e38aa6c9a2f:39fc1ff9:14c5def5247:-8000-00000000000a5653,0] [APP: soa-infra] <.> validateContextToken: workflow session was not found for given context. Create a new workflow session with token=51490173-e3d0-41dd-ae99-983915aa8454;;G;;Z+P7Oe9ABnoTUQD9ECryEW2l0/8yRcqPDyZsOWBCuzMmRgA3Qsj601TxmWQ87z2MjuwW5AH+KzgjIwkPmhJFdpc1FrE6Y/MrN1bxIDHJWu2/zP3iSNwKD07hRrh/U37Ea0TvaQyuaHJIog9y3Ptmzw==
One important point is that we're using only the embedded WLS ldap. So I am not 100% sure if we should be using the virtualize flag=true, once all docs I read point out that this should be done when using multi-ldap providers.
Also, I only got this error in the "diagnostic.log".
Although, no user has complained about using the system, I really want to work it out. Anyone has any suggestions?
Thanks in advance!

I have moved your thread from Certification to SOA Suite to get proper assistance.
Thanks,
Lisa

Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server.

This is the the alert I keep getting when i try to add this new printer
"Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server."
Im am having BIG problems getting my printer to be recognized

water bar wrote:
I am getting the identical error message for an HP Officejet 7200 series printer.
First there is a message that software is available from Apple. You click to get it. Then it tells you that it is not currently available from the software update server.
I am running OS 10.8.2. Printer is on my home network (not USB).
I went to the Apple Software Dowload site and re-downloaded the latest "HewlettPackard Printer Drivers" (v.2.12) and installed them (twice). No dice.
Anybody found a way around this problem?
I solved all print related issues by avoiding HP, worst software I ever saw, this may not work for you though.

Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server.

I'm trying to setup my Canon MX870 USB ink jet printer plugged into my Airport Extreme's USB port. However, I keep getting a message of; "Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server." And then I have to click cancel.
The "Print & Scan" from System Preferences, can see the printer as it has the NAME: Canon MX870 series, and the LOCATION: 'the name of my network', and USE: MX870 series. But after clicking "Add", it tries to install the software (I've already installed the latest drivers however on my Mac Pro) and that's when I get this message;
"Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server."
Any ideas, help would be greatly appreciated!
Marty

Hello Marty,
It sounds like you are not able to add your Canon printer in System Preferences. I found an article with steps you can take to resolve this:
Resolution
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Adding redirect path and pattern in Lion server for configuring software update server

Adding redirect path and pattern in Lion server for configuring software update server.Any changes

Ok, after days of browsing on the forum I found the following hint on another discussion related to AFP access:
"This may be a service ACL issue.
It turns out one of the latest Apple updates turned on Service ACL's which caused AFP connections to be blocked. Once I fixed the Service ACL in Server Admin... all connections and Single Sign On worked."
Well, after allowing access to all services to all users with Server Admin, we were finally able to log in the server with our admin account...
So, there must have been an update that turned on ACL's which caused even our local access, probably for OD/Kerberos, on the server to be restricted.

Plese Help. Me have FAT32 USB, ISO. Boot camp:Can't install Windows Support Software because the Software Update Server "(null)" can't be found. It asks me to network Diagonostics, but internet ok. Plese Help

Plese Help. Me have FAT 32 USB, ISO, Boot cam say can't install windows support software because the software update server "(null)" can't be found.
I know there are many other threads, but I guess I couldn't find clear answer to this problem. Is that the Apple's server problem or just me?
I'm trying to install Windows7 via Bootcamp, with FAT 32 formated USB with ISO, on Macbook air 2012.
Thanks!

The problem is the encryption and how your notebook handles it rather than a Time Capsule problem. I had similar problems until I updated the WLAN drivers on my IBM T41.
The way I convinced myself it wasn't an Apple problem was to connect my IBM T41, via ethernet, to my AEBSn. I was able to connect to internet so I knew it was a conflict between my wireless card and the AEBSn.
I am now using the WPA2 encryption for the AEBS without issue and connecting many different types of hardware; three iPod Touches, two MSI Wind Netbooks (Win XP SP3), one IBM T41 (Win XP SP2) wirelessly and both my 20" iMac and Dell 8250 Win XP (SP2) by ethernet
The MSI Winds are brand new and they would connect to the AEBSn but couldn't get an IP address from the internet (Limited or No Connectivity error message). The AEBSn was using WEP encryption. After doing a little research I found that WEP was a very common cause of this error message so I switched the AEBSn to WPA2 and everything works fine now.
Don't assume that because you can't connect via OPEN it isn't a encryption issue because my Winds wouldn't connect that way either...it wasn't until I changed to the WPA2 Personal that they connected.
You may also need to change the program that handles the WLAN connection, sometimes Windows handles it better but for the newest addition to our household, the MSI Winds, I am using the Realtek utility that matches the WLAN card and everything is hunky dory...
Finally sometimes firewalls will prevent getting the IP address...doesn't happen often but it has happened to me so I would double-check that by turning off the Windows Firewall and just verify that it isn't the firewall (that's never been a problem with my Apple AEBSn but it was a problem with an older Dlink g model).

No update server found for context :e:

Similar Messages

Maybe you are looking for