1finger swiping doesnt work, can only swipe with 4 fingers How do i change this setting, 1finger swiping doesnt work, can only swipe with 4 fingers How do i change this setting
How do i change the swipe settings in my i pad mini. 1 finger swiping does not work and can only use 3 and 4 finger swiping? Thanks.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Cheers, Tom
Similar Messages
-
my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me
After being connected to a charging source overnight try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
There are text messages that I'm having trouble deleting. With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!
But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync. -
I have a home computer with purchased itunes music and I want to transfer to my Iphone - how can I do this (syncing doesnt seem to work
Syncing is the only way. Explain what you mean by "doesn't seem to work." Exacty, what did you do and what happend.
Are you sure your iPhone is signed into the same iTunes Store account as iTunes on your computer? -
iPhone 4S. Swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work. cannot restore iphone either as it wont let me.
Hey Angus97,
These are the recommended troubleshooting steps to take when you are unable to Slide to Unlock:
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
from: iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Welcome to Apple Support Communities!
All the best,
Delgadoh -
i have iphone 4 and it doesnt update with my itunes. i'm runing 4.2.1(8C148) with baseband 03.10.01. whenever i update it, it says "the iphone could not update. this device is not eligible for the requested build". i dont know what this mean? can anyone help me??
thanksHello,
I have had the same problem as you, and have spent the past 2 days figuring it out. I have been on the phone with AppleCare 3 times, and been to the Apple Store once as well. I ended up reinstalling iTunes completely, creating a new Administrator account on my Mac, and getting a brand new iPhone 4. None of these fixed the problem. I did figure it out, and hopefully this helps you as well:
http://support.apple.com/kb/TS3297?viewlocale=en_US
Follow the drop menu for "Blocked by Configuration"
Follow these steps
I have a Mac, and I skipped everything except for the Terminal instructions.
I did the Terminal command, added # and a space in front of the only line it showed that had apple.com in it, then saved and exited. My update worked perfectly immediately after I completed those steps. Again, I hope this helps you as well! -
I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???
Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID. -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html -
I do not use the Internet using wifi I use 3G mobile broadband and if I do need wifi it tells me I have to pay for it, but I can not work out how to install or connect my iPad with my new printer if there is not a cd slot or USB port. I only have an iPad no computer so how on earth do I use my printer with it if it I can't install the printer cd. I though I would be able to use Bluetooth and it would pick it up automatically but I am really confused now and don't know what to do please help.
The iPad uses AirPrint technology to print to a printer. Check this Apple support page to see if your printer is listed as being AirPrint compatible.
http://support.apple.com/kb/ht4356
If your printer works with AirPrint you will need a Wi-Fi network in order to connect. That Wi-Fi network does not need to be connected to the Internet. As James Ward4 says, you'll need a Wi-Fi router to set up your network. Most routers require that a computer be used during the setup process. Perhaps you could use someone's computer to do the setup if you do not had one yourself. Once the router is set up you should be able to print. -
Hi,
I have been struggling with this for a few days now.
i have pc where no outlook is installed, where i installed the MAPI CDO Runtime may update (version 6.5.8320.0). i checked in the registry that the default mail provider was set to exchangemapi (HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail) .. it is.
I downloaded the lastest version of mfcmapi, which i believe was the version of december 2013
but i can't seem to create a profile for office 365 in it. I followed http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx and then i changed the properties to what was proposed here http://blogs.msdn.com/b/dvespa/archive/2013/07/15/create-profile-connect-mfcmapi-to-office-365.aspx
That did not work, i keep getting an error one ore more properties are invalid when i try to use that created profile to connect to office 365 (from within mfcmapi).
I also changed some of those proposed values to what autodiscover was telling me like setting PR_PROFILE_RPC_AUTH_PACKAGE to RPC_C_AUTHN_ANONYMOUS which should be the value $8000F001 instead of RPC_C_AUTH_NONE (at least i think so)
I builded a simple program to encrypt my password using CryptProtectData and entered the value using mfcmapi in PR_PROFILE_AUTH_PASSWORD as was suggested in the last page.
but nothing seems to work, i keep getting wrong configured errors and i'm totally clueless atm. This is supposed to work right on a pc where outlook is not installed ?
I also tried this on another pc where outlook 2010 is installed and i am able to create the profile there and connect without a problem given that i enter the logon credentials once and let them be remember (they get stored / cached in the windows key store,
like when using CREDWRITE function) from then on i can connect without a problem.
also when calling configuremsgservice on the EMS service i created for a new profile in mfcmapi and let the UI show i can see on the pc where outlook is installed in the UI options to enter proxy information however when i do the same thing on the pc
where only the mapi cdo runtime is installed i do not see any UI option to configure the proxy server information ... is this normal ?
Hopefully someone can shed some light on what i'm doing wrong or might be wrong.
Thanks in advance
Willems DavyThe window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
Even though it's about a different application, I'd try the following document with that:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
(Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.) -
Before LR, I used photoshop, and saved my edited and non edited pictures to a NAS drive which had read only file sharing, so all my family could browse and view the photos.
asSince using LR 3, all my photos have been locked up in LR, with no usable way for anyone to see them. The only thing I do is tediously save some processed pics in small size, then upload them to facebook. Howwever, my vast library of photos is locked up in LR.
My 4 year old daughter LOVES to look through them, but there is no option to give her READ ONLY access.
I tried installing the ipad app, but this is useless for this purpose for 3 reasons:
a) I have to sync each collection manually, no search options.
b) a few swipes with her tiny fingers, and my collection is wiped out as it syncs her "changes" back.
c) I have over 1TB of photos, and to sync this with Adobe would take months if not years, even if it only uploads the smart versions.
What I, and probably all family photographers need, is a read only app (and possibly website) which can browse the entire repository of an LR catalog, or at least something like a read only version of the current app which requires each collection to be uploaded to Adobe (not something I really want to do - my local network is fine, and much faster, than a rural internet connection).
How hard could it be to add a read only flag for mobile app, or a read only guest version of the app, or a basic web server to LR?
Personally I would never want to edit my photos on my android phone, it seems like a gimmick, but I would want to show them to people, including daughter/mum/friends, and let them browse on my phone. If anyone knows a way to do this, let me know.
Its such a shame to have 40 years of amazing, categorized and tagged pictures locked up on my laptop, where no-one can view them.
I tried the below link where there are some share options I have not been able to try:
Adobe Photoshop Lightroom
as it simply says "you have no synced collections" and tells me to download lightroom, when a) I have synced collections, I can see them on the android app, b) I have LR 5.6 and LR CC both installed on my machine.I tried to figure out what you were asking about, and realized that I did not see the synced collections either. But then I realized I was logged in to the wrong Adobe account - my wife is the actual subscription holder. not me. But I stay logged in as myself to participate in these forums.
So I logged out and logged back in as her, and still didn't see the collections. I closed the page, reopened it, closed it again, and I wish I could tell you why, but the collection I have synced to Mobile showed up.
So there is a perfectly good web site, you just need to get logged in properly I guess.
I clicked on the sharing options icon and this is what I get. I redacted the URL for obvious reasons:
You can allow the viewer all, or picked, unflagged, rejected. I don't see a way to make it completely read only. Just don't teach anyone how to flag or pick a photo. -
How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased books from the ibook store. The problem is, once I create a document in Pages and turn it into an ePub to be opened in iBooks, I delete the document in Pages, because I don't need two copies taking up space on my iPad. Before Maverick, iTunes would backup everything in my iBook app on my iPad. If something ever happened to my iPad, all of my created ePubs would be lost and I would be screwed. I suppose I could keep everything on Pages and go to iCloud and download my documents to my Mac, but that is a lot of steps. I may have to do that if there is no other way, but I am hoping someone will have the answer for me. Pretty disappointed in iBooks app for Mac at this point.
iBooks only syncs purchased books. Others must be synced in iTunes.
-
Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.
From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.
Maybe you are looking for
-
I have an IPhone 4 and downloaded 12 songs from the Itunes store on my phone. I want to burn a CD but when I go into my ITunes on my desktop which is Windows XP there are only 7 listed not the 12 I bought. Can anyone help me find the others?????
-
HI Experts, Here iam testing the RT Tables of an employee in Quality server. In My quality server there are only results upto pay period 06/2006. For testing purposes i have run the payroll for the next periods for the particular employee. Is there a
-
Using Clipboard content in script
file:///C:/Documents%20and%20Settings/uSER/Desktop/clipboard%20forum.indd Hi friends, While i am using "find & change or GREP clipboard content" it automated lot of things in Indesign file. But i dont know how can i used in the script. We are using G
-
Sync failure because itunes sync server failed to sync the iPhone
I have an iPhone sync problem that started when I updated to iTunes 7.4.2. One person's solution of removing the "MobileSync" folder did not work for me. (Note that my MobileSync Folder is in my Library/Application Support Folder.) So, I am still sea
-
I had a Motion 5 file which I open and it won't show. It opens Motion 5, but it just says "Application Not Responding". However, once I open other files, I get the regular Motion 5 (If that makes sense.) So basically I saved this file while Motion cr