I can't seem to make a working profile to connect to office 365 on a windows 7 pc with only the mapi cdo runtime version 6.5.8320.0 installed using mfcmapi nor programmatically
Hi,
I have been struggling with this for a few days now.
i have pc where no outlook is installed, where i installed the MAPI CDO Runtime may update (version 6.5.8320.0). i checked in the registry that the default mail provider was set to exchangemapi (HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail) .. it is.
I downloaded the lastest version of mfcmapi, which i believe was the version of december 2013
but i can't seem to create a profile for office 365 in it. I followed http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx and then i changed the properties to what was proposed here http://blogs.msdn.com/b/dvespa/archive/2013/07/15/create-profile-connect-mfcmapi-to-office-365.aspx
That did not work, i keep getting an error one ore more properties are invalid when i try to use that created profile to connect to office 365 (from within mfcmapi).
I also changed some of those proposed values to what autodiscover was telling me like setting PR_PROFILE_RPC_AUTH_PACKAGE to RPC_C_AUTHN_ANONYMOUS which should be the value $8000F001 instead of RPC_C_AUTH_NONE (at least i think so)
I builded a simple program to encrypt my password using CryptProtectData and entered the value using mfcmapi in PR_PROFILE_AUTH_PASSWORD as was suggested in the last page.
but nothing seems to work, i keep getting wrong configured errors and i'm totally clueless atm. This is supposed to work right on a pc where outlook is not installed ?
I also tried this on another pc where outlook 2010 is installed and i am able to create the profile there and connect without a problem given that i enter the logon credentials once and let them be remember (they get stored / cached in the windows key store,
like when using CREDWRITE function) from then on i can connect without a problem.
also when calling configuremsgservice on the EMS service i created for a new profile in mfcmapi and let the UI show i can see on the pc where outlook is installed in the UI options to enter proxy information however when i do the same thing on the pc
where only the mapi cdo runtime is installed i do not see any UI option to configure the proxy server information ... is this normal ?
Hopefully someone can shed some light on what i'm doing wrong or might be wrong.
Thanks in advance
Willems Davy
The window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
Even though it's about a different application, I'd try the following document with that:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
(Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)
Similar Messages
-
I have just downloaded the latest operating system onto my 4S. I now can't get notifications on Whatsapp or Viber. Message says to connect to itunes but I can't seem to make it work. Any suggestions?
You need iTunes version 11 for iOS 7.
iTunes version 11 requires OS X 10.6.8 or later...
Click on the Apple icon.. Top left in Finder...
> About this Mac > Version...what does it say? -
I have a generation 3 ipod 80 gig. When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it. I can't seem to make this work I have reset the ipod, reloaded itunes all to no effect. Any ideas?
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Nested styles: I can't seem to make this work
I can't seem to do this nested style: All Adobe Garamond. Headline: 24/25 centered. Return. Byline: 9/10 centered, stacked. "by" is italic with a .5, one inch wide rule above. Return. Author's name is small caps with the same rule below. Return. Body text is 9/10 regular, first paragraph has a 3 line bold drop cap, the other paragraphs have a .25 indent.
Nothing seems to work when I try to set this up. Rules everywhere...and I am supposed to have the document set up in 14 hours....help!Nested Styles are character styles added inside a paragraph style that affect only certain parts of the text, based on trigger patterns that you set up. Typically you would use a nested style to do somthing like make the first three words of a paragraph Italic, or make a price bold on a menu.
It's probably technically possible to achieve your title using nested styles, forced line breaks as triggers, and paragraph rules above and below with the proper offsets, but what you want to do is not typically done with nested styles, but rather with a series of individual paragraph styles that are applied in rotation automatically using the "next style" attribute.
Mikes example is using three paragraph styles for the heading. PStyle1 (just a place-holder name for a pragraph style here) is applied to the text Headline 2, and as part of that style defintion the "next style" is set to PStyle2. PStyle2 is applied to the By line, and its next style is set to PStyle3, which is applied to MW Design. Each of these lines is a separate paragraph (he should have shown you the non-printing characters so you could see the hard returns at the end of each line). PStyle3 should have its next style set to your style for the first paragraph of body text that includes the drop cap, and that one needs a next style set to the paragraph style for your other body text. This last body style should have the next style set to "same style."
If you are typing directly in ID, for each story, set the style to PStyle1 and begin typing. When you hit Enter to move to the by line, the style will change automatically, and will change again each time you hit Enter until you are inthe second paragraph of the body copy, where it will keep the same style until you change it manually again.
If you are working with imported text you can select an entire story froom the fiorst line of the title to the last last paragraph of body copy, then right click on the PStyle1 name in the Paragrapgh Styles panel and choose Apply PStyle1 and Next Style and the whole shebang will get the correct styles applied in one click. -
Trying to use AX as an extender and wired point but can't seem to make it work, help plz
Hello,
I'm currently using a ISP supplied huawei HG8245, and using an AX to supply the lower floor satellite receiver with a wired connection and was also hoping to use it as a range extender for the huawei, but failed so far the wired point is working, and light is green, but as soon as i flip it into "extend wireless network" it goes yellow with the error that it cant extend the netwrok.
i tried looking around the huawei set up but cant seem to find the equivalent of "allow network extension" but so far nothing is coming up.
i would appreciate some help...Unfortunately, Apple's "extend a wireless network" appears to be a proprietary function that will only work among Apple routers, if you are trying to extend your network wirelessly.
Another way of saying the same thing is that you need to have two Apple routers on the network to be able to "extend a wireless network".
Here is what Apple's product literature for the AirPort Express says about this subject:
Extend an existing Wi-Fi network’s range.
If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express
Ironically, the AirPort Express will "join" virtually any wireless network and the Ethernet port is enabled in this type of setup. But, the AirPort Express will not provide any additional wireless signal coverage when it "joins" a wireless network. -
How do I turn on form auto-complete? I can not seem to make it work.
I have gone into hitory and changed the settings there to remember, even going into custom settings. I still have to fill in all forms. HELP!!
See:
* [[Form autocomplete]]
* Tools > Options > Privacy > History: "Remember search and form history"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.
OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options -
I'd like to remove a thin line that is part of the page design in one of Aperture's photo books. I can't seem to make it happen. Any suggestions?
The mouse that came with my Mac does not have a right click feature. When I try to highlight and click, it just opens the link I don't want anymore. What I want to do is remove unwanted links from the top bar. For example, I no longer use GoodSearch or myEarthLink, but I can't delete them. There are also some links that never should have found their way up there, and I don't know how they ended up there, and I can't remove them either. I've read through a ton of questions and answers, and I can't find one that addresses the problem. With my Safari browser, all I have to do to remove an unwanted link is to click and drag it to the trash. It doesn't appear to work that way with Firefox, to my chagrin. I hope this better explains my question. Maybe that will give you a better insight into a solution.
-
hy, does anyone know why my computer doesn't recognise my iphone? I can't seem to make it see the personal hot spot any suggestions? thanks
Did you update to iOS 7? If yes you need to update iTunes on your computer to iTunes 11.1
If you are using iTunes 11.0 and iOS 6.x then show the left sidebar in iTunes.
When in iTunes on your computer use the View menu to View Sidebar. The device should show up there when connected. -
I'm trying to install Adobe PS CS3 for my boss on an other computer. I put the Program on a hard disc and copied it to the other computer now it won't open and says it needs the license. What can I do to make it work on this computer?
Copying the program over to a new machine will not work. Install it using installation files and activate it using the serial number assigned to the license.
CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html -
HT204266 how do i turn the shuffle off? I can't seem to make it unshuffle my albums?
how do i turn the shuffle off? I can't seem to make it unshuffle my albums
On the left side of the music playing screen under the scrubber bar is the shuffle control icon. It is the arrowed racetrack. Tap the icon until it is white. See chapter 4 of the users guide;
iPod touch User Guide (For iOS 5.0 Software) -
even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold eddition.
Hi, Thilina66. You say you have entered the country code but still cannot make international calls. I suppose you are adding the international access code before the country code. This internaltional access code (011 in the US, 00 in Europe, etc.) can be substituted by adding a + sign before the country code.
For example, to call a number in the UK from the US you have to dial:
011 44 7540 267898
or
+44 7540 267898
To call a number in the US from the UK you have to dial:
00 1 212 456 1470
or
+1 212 456 1470
Please check that the contact number in your address book is correctly written if you are dialing directly from the address book or that you enter the correct numbers in the keyboard if you are dialing from the keyboard. -
I can't seem to make an actual phone call from my iPhone 4S. I dial the number, and the phone at the other end rings. But at my end there is nothing. No ringing. No person trying to talk to me. What is causing this problem? I have got all of the current updates loaded to my phone.
My brother had a similar problem and he went to the Apple store and they gave him a new one under warrenty...she said something about the arial, I would give it a go.
-
I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I
I recently purchased a new Logitech Webcam and can't get it working on the site that I use. I can see myself on the small screen but can't get it to transmit to the person I am camming with. Can someone help me with this, it is very frustrating to say the least, I have tried everything I know how to do.
Thank YouI used to use Internet Explorer, but can't get on it now so I use Google Chrome.
Thank You: Donald Smith
Mike M <[email protected]> wrote:
Mike M http://forums.adobe.com/people/C+F+McBlob created the discussion
"Re: I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I"
To view the discussion, visit: http://forums.adobe.com/message/6318810#6318810 -
i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?
i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?
Maybe you are looking for
-
Help Needed with Dynamic RePort PAges
I've created a link that dynamically will generate a data report from my db. I have about 30 reports the client needs to be able to run. Do I have to create a separate page for every single recordset?? Is there a more efficient way to do this??
-
I'm trying to combine two rows under one column. using: oracle 10g Here is my code select cr.report_id as report_id, cr.report_name as report_name, ei.info as info from SPSS.WEB_CLIENT_REPORTS_NFL CR, spss.web_report_extra_info_nfl EI wh
-
Calendar pop-ups not available in portal but appearing in BAB
Hi, When I execute Sales Order transaction through BAB, certain fields with Date values are having pop up icon through which calender opens up, but same thing when executed through protal does not show such icon through which calendar can be opened,
-
Help on opening a damaged Appleworks file
I have a large Appleworks file that I cannot open. The file is about 300 pages with photos. It was getting very slow and unresponsive so I thought it was way past due to save and put it on a disc. When I opened it the next day,(from the HD) I added a
-
SAP ROUTER CONNECTION STRING FOR SAP SERVERS
Hi, I want to create saprouter string for accessing ecc6.0 server, router is given with one public ip and my server is in domain,help me in creating saprouter string. Thanks & Have a good day Naveen