2.0 Issue that I haven't read about yet

This is the lenghty email I just sent Apple:
I like many others have been experiencing issues with the new 2.0 update for my ipod touch. the first issue is that my battery life has dropped signifigantly. if i use the touch for an hour it will be half way down, just reading articles, not using wifi at all. the other issue is that when i try to sync apps from itunes, some will fail but then when it is resynced they load fine. (i have a design issue with everytime you update apps the reorder them on your screen) the wifi is screwy, it will say "server not found" then when safari is rebooted it is fine. also it will randomly restart.
Now all of these issues are HEAVILY DOCUMENTED on your support forums, one however I can't seem to find anything on, and i hope it is also just a flaw with 2.0 that will be resolved very soon....anyway, i like to charge my touch while it is off. in the past i would turn it off, plug it in and see the battery pop up on the screen. now with 2.0 when it is off and i plug it in (at the wall or pc) it will turn itself on. when i try to manually turn it off, i get zero indication of it still being charged. it is just a black screen.
The point is which i hope you are well aware of by now is that hundreds of thousands of LOYAL apple fans that have apple tatoos and put apple stickers over the kenmore badge of their fridge and name all 3 of their kids Steve Jobs all because apple is known to be very realible and friendly for anything they touch (no pun intended) spent several hundred dollars on their equipment and money to update their touch to 2.0 all to not only have issues with the software, but even larger issues with support.
I, being an executive for a fortune 500 company am the first to understand keeping issues as quite as possible, and i further understand software glitches with any large update. HOWEVER, i do see a big problem when A) apple has done nothing to address this issue, even on their owned and opperated forums and B)have all of you employees treating this issue as if it doesn't exsist and that it is the users fault. the worst part is when the company knows of the issue and all of the employees deny it. i recall when microsoft had xbox360 issues they did everything they could to fix them and lost millions in the process, meanwhile apple wants a customer on you very own forum to pay $30 to mail his or her touch in to you.
This is just not what myself or anyone else expected from a company held in such high regard. please, address the problem, let your employees (especially the ones in the stores) know that this is an issue, and get a fixout immediatley.
thank you for reading,
regards,
Mike
so like the topic title states, i am having most of the issues that others are having (not as bad though) however i went to charge my touch tonight (because after an hour it was half dead). so i turned it off and when i plugged it in, it turned itself on! when i turn it back off while leaving it plugged in the batter picture that used to show up on the screen is not there, so i have no way of knowing if it is taking a charge.
i haven't read about this issue yet and it worries me. it always used to show the battery meter on the screen when it was off and plugged in (and it never would turn on when plugged in)
someone test and help, please.
Message was edited by: knightriders3

I use a Macbook with Windows XP in Bootcamp & Outlook. Since I upgraded Itunes and Ipod, my calendar and contacts will NOT sync. I have tried everything many times.
My daughter uses a Macbook with Leopard and since she upgraded Itunes and Ipod, all of her music purchased from Itunes won't play. You can see it, you just can't play it. Her other music works fine.
I am a software programmer. This is definitely a major software issue.
I understand that it takes time to find and repair these software issues, BUT
Apple needs to at least let us know that they are working on it.
I'm sorry, without contacts and calendar functions that work, what is the point of trying to sell Mobile Me. From the threads, it sounds like it doesn't work either. What a sad joke.
Apple - get your act together.

Similar Messages

Firefox 13.0 marks my "New" emails as "Read" even if I haven't read them yet

When I go to read my emails, I will notice I have emails that I "did not" read as having been "read".
They are not "highlighted" letting me know that they are "new". Is anyone else experiencing this?

I couldn't reproduce this and I just sent myself a test email from my gmail account. Are you using the new Yahoo Mail interface or the old one?

I've read a lot of comments/suggestions about camera issues that it turns black when opening the phone camera but nothing is worked for me. I'm so frustrate on my iPhone 5s im using it like for a month, I thought its more better than Samsung but I failed.

I've read a lot of comments/suggestions about camera issues that it turns black when opening the phone camera but nothing is worked for me. I'm so frustrate on my iPhone 5s im using it like for a month, I thought its more better than Samsung but I failed. Please help!!! I hope apple has something to do about this. Thanks.

I would have had the phone looked at long before a month of problems.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. You phone is under warranty and someone at an Apple store can help you.

Any Ideas on a Comcast Issue that Only Effects Firefox?

Some background....
For the last few years, Comcast has offered a "Domain Helper" service for Comcast users that use Comcast's DNS servers. When enabled and a DNS lookup fails, instead of seeing the browser's "can't connect" message, the browser gets directed to [http://search3.comcast.com/?cat=dnsr&con=ds&url=ahkjfhakjsdhakjshd.com Comast's "Domain Helper" search].
Luckily, Comcast allows their users to opt-out (turn off) this service. I opted out in 2009 and haven't thought about it since... until yesterday.
Yesterday, I typo'd a web address (as I do daily) but, instead of the Firefox "Server Not Found" message with the "Try Again" button, I was sent to Comcast's Domain Helper.
The first thing that came to mind was that Comcast reset my settings so I logged in to my account but my Domain Helper setting was still set to disabled.
I then tried the same typo'd domain in Chrome. No Domain Helper, just the expected error message from the browser.
I then tried the same typo'd domain in Safari. No Domain Helper, just the expected error message from the browser.
I then tried the same typo'd domain in MSIE. No Domain Helper, just the expected error message from the browser.
I then tried my 2 laptops (same network, different OS's, same version of Firefox) and had the same results (Comcast's Domain Helper is only displayed when using Firefox).
Just to make sure, I overrode Firfox's User Agent string to see if that would change anything. It did not.
Confirming the issue is related to Comcast's DNS is easy since it stops when switching to OpenDNS or Google's DNS. But this just makes it more curious.
So, Im wondering....
Any other Comcast users (I'm in Atlanta, GA) experiencing this?
How could this only be effecting one browser? Is it possible for a DNS Server to send back different responses based on browser?
Has anything changed with the way Firefox 8 handles domain resolution? I'm not sure this started with the update but it never happened with earlier versions of Firefox.
As you'd expect, Comcast's support is clueless and give the same useless suggestions they give whenever they're presented with a problem that doesn't appear on their sheet of scripted resolutions. Restart your router, clear your cookies and cache, restart you computer, reinstall Firefox. Bleh.
Anyway, I know some sharp people hang around here as well as some people that may be familar with how Firefox handles DNS lookups so I figured I post this here. Like I said, it's easy to fix on my end (change my DNS servers) but not knowing really bothers me.

I use Comcast in the Chicago area market and have a problem with the "Opt Out" stopping about once a year or so. It appears as being enabled at the Comcast Opt Out page, but the unresolved addresses are still going to the DNS "domain helper" service.
What works for me is to turn off the opt out preference, log off from that Comcast account, and close Firefox. When I restart Firefox, log in to Comcast, and then set the pref to "opt out" again - it works as intended and doesn't cause me a problem until it happens like 10 to 12 months later.
As far as why it seems to affect browsers in a different way, I have no idea. I do have Safari, Opera, and IE 8 installed, in addition to multiple versions of Firefox, but I don't use those other browsers enough to have seen a difference. I am usually opening pages from within Firefox in those other browsers to view the difference, ''or to print something that Firefox screws up in the Print Preview''.

I've factory reset my iPhone twice, about to be three times. has anyone else had issues that force them to factory reset their phones.

So I got my iPhone 6 on the day it came out and it has been the most frustrating experience I've ever had with apple. I've had to factory reset my phone twice, probably about to be three times once i get home from work. The first time was trying to transfer my stuff from my old iPhone and right after it finished my iPhone 6 turned itself off then turned on to the boot up screen (the one with the apple logo) and then shut off then did the same thing. this forced my to factory reset my new iphone literally the day i got it. The next day i was trying to upload my music and basically the same thing happened again, forcing me to reset my phone for a second time. Just now (its been two weeks that I've owned my new phone)i tried to get on twitter and the app crashed then my phone reset itself and when it loaded to the unlock screen, instead of my background it was just a black screen with the time and the unlock slide. when i unlocked it, it went back to the normal background and the main screen. Because whenever i would turn off (not power off, but put it to sleep) the phone and turn it back on it would do the same thing. I decided to restart it (actually turn it completely off and then back on) and now it will show the boot up screen then turn off. I understand that there is the solution of factory resetting my iPhone, but 3 times in 2 weeks is pretty unacceptable, seeing as i had a 4s for almost 3 years and never once had to factory reset it and its also incredibly annoying to have to redownload all of my stuff. Has anyone else had this problem? is there anyway i can keep this from continuing to happen? is it a software issue or is it the phone itself that is messing up?

WiseJD, thank you for your suggestions. Well the first two restorations were the first and second day (9/19 and 9/20) that i had my 6 and both times i chose to restore is as new. since then there haven't been any issues until now. granted the first time my phone messed up was after i used the At&t transfer app which made me think it couldve been something that corrupted my device. the second time though started with me attempting to download music from the itunes store app on the phone. for whatever reason it would download but not but it wouldnt process and install the music. Then i tried to download it from my computer and thats when the second screw up occurred. that time i dont think it was an issue of my phone being corrupted because it was already acting strangely before i ever plugged it into my computer. This third time, i'm at work so i havent been able to do anything about it, i wasnt downloading anything and my phone was not hooked up to a computer, i simply tried to open twitter and then all this happened. and it has been a solid almost two weeks without incident which makes me think its my phone and not corrupt files. also looking at forums, not just these but other online, i haven't really seen anyone with the same problem which adds to my thought that its a problem with my phone.
Just to be clear, the first time this happened, the iphone would display the boot up screen then shut off then turn on and display the boot up screen, then shut of and kept going on like that until i put my iphone into recovery mode and factory reset it. the second time the iphone would display the boot up screen and then shut off, but wouldnt turn on unless i pressed the power button again. this third time is the same story. i dont know if this makes a difference or if its symptomatic of different problems but i figured it wouldnt hurt to explain in detail the issues that happened each separate time.
Also on a side note, i havent done anything like jailbreak it, mess with it download or any third party apps not on the app store.

Preview problems: PDFs that the computer had read as English are now read as gibberish

I download a PDF, and I open it with Preview on my Mac or GoodReader on my iPad (all synced with SugarSync): initially it's text; I can search for text in the PDF, I can highlight text and copy it, and all is well.
Then, I make annotations, maybe once, maybe a few times. Suddenly some PDFs, while still looking the same to me, are no longer "read" as English text by the iMac/iPad: when I search for a term that's obviously on the page in front of me, it's not found. If I highlight text from the PDF and copy it, the copying doesn't work - sometimes it's gibberish, sometimes it's just blank. Note that it's not read as a picture - I can still highlight words and phrases - but the computer/iPad doesn't recognize those phrases. "Eric" for some reason has become I7CK;BH$:;B7DO. To me, it's still totally readable - it's just that the computer doesn't copy/read it as English.
Has anyone had similar issues?
I've tried using PDFPen to "re-OCR" the document, but it won't let me do that, I suppose because the computer still reads the file as text - just not English text. I haven't yet figured out where in my workflow this is happening - the different steps are I suppose annotating in Preview (on the iMac), annotating in GoodReader (on the iPad), and syncing with SugarSync. At the moment I think it's editing with Preview first that somehow renders the file non-English, but I'm not sure of that at all - nor do I know if this is happening after one time annotating, or more.
I almost always make duplicates of PDFs (princially academic articles) before annotating, so I can usually go back to original clean PDFs, but it's more than a little annoying that all the previously-English annotations are suddenly unreadable.
This thread from the archive ...
Copy and paste from PDF in Preview results in gibberish
... seems to be related, but doesn't seem to have any real solutions, unfortunately.
Two things I'm mainly concerned with: (1) stopping it from happening again; (2) taking the now-gibberish annotated PDFs "backwards" so they become English again.
Thanks in advance for any help you can offer!

First, please find a window based PC with iPod updater pre-installed, connect your iPod with it and click Restore, please note it really does not matter it can complete the process or not. Wait for 5 minutes and reconnect it with your Mac (may be you need to put it in disk mode). Do the following
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”

HT4623 Do I need to update my iphone4 because of the security issue that has been published lately?

Do I need to update my iphone4 because of the security issue that has been published lately?

Your profile shows you have a 4S with 7.0.6. That is the most current update. Do you also have a 4 that you haven't updated? If so, you should update it too.

Looking for some assurances that I haven't made a mistake switching to Mac.

Bought an intel-powered IMac 9 days ago and love everything about it's look, functionality, etc.. Only problem: I've had a bout of "Application has closed unexpectedly" occcurrances while using Safari (while at AOL.com deleting emails from aol account) and while editing pics in iPhoto. As this happened time and again, I got a sad, sinking feeling that I'm headed for the same frustrations that I've had w/ every Windows machine I've ever owned. Ugh!..I switched to Apple for the specific purpose of avoiding crashes!!! Apple support walked me through steps to fix (removed/updated Quicktime, and check a few other things..). They were very helpful, but... I absolutely detest having to do this. Other than Office:Mac, i've added nothing to this machine! I'm really stressed about this. I paid far more for this than I would have for a Windows machine simply because I had heard that Apple machines don't do this sort of thing!!
Please tell me that this is normal and expected with a new machine and not a harbinger of more complicated problems to come!! I'm hoping that once resolved, I won't much more of this.. On the other hand, if many of you feel that this issue is a bad omen, I'll take the machine back while I still can. ..What a pity though, it's truly been a joy to use so far.
IMAC (early 2006) Mac OS X (10.4.4)

Hi syd123! And Welcome to Discussions!
No you haven't made a mistake! You will love your Mac!
Deleting AOL Mail, crashes Safari (Consolidation)
It seems the most recent Safari, and or 10.4.4, update has created this problem.
Apple & AOL are both aware of this, but, as far as I know, no correction has been implemented.
Here are some of the work arounds, that I have been able to discern from the various posts regarding this issue.
Use the FIREFOX BROWSER.
Use your AOL Mail program.
Use this utility AOL SERVICES ASSISTANT, to set up Apple Mail, to access AOL Mail.
Access the AOL Mail thru Classic AOL Webmail.
And here are links, to the various threads, discussing this issue.
<a href="http://discussions.apple.com/thread.jspa?threadID=314479&start=0&tstart=0 "Safari and AOL</a>
AOL/ Delete/ Safari crash
safari crashing with aol.com mail deletion
AOL Webmail and Safari on 10.4.2 crashes on delete mail
Update 10.4.4 causes crash
Safari crashes when deleting email on AOL
Safari Update
Safari Crashes AOL mail
Safari Crashes when Deleting or Reporting E-Mail as SPAM on AOL Web Mail
Looking for some assurances that I haven't made a mistake switching to Mac. This Thread
Good Luck!
ali b

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

The .txt file has formatting issues that need to be resolved

Transaction ZEHS20 runs a program that assigns a CCL Group to a specification header, based on its Active Ingredients. The transaction can be run in the background if desired with output being emailed to the user.The .txt file has formatting issues that need to be resolved. can u pls Help me to resolve this issue.
Thanks

What is the formatting issue like? Could you please elaborate a bit more.
If it is because of varying lengths in the data then it can be handled by utilising a CONCATENATE RESPECTING blanks.

Adobe 9 issues with forms in Acrobat Reader 7

I've been reading up on this forum as to why the adobe rights are disabled after a user saves their data in Reader. I have been adding form fields in Adobe Standard 9 then save the file, test it in Reader, then Extend the Forms Fill-In for Adobe Reader and save the file with a slightly different name. The only usage rights that are allowed is to Save Form Data. When I test the file in Reader 7, I can save the data but when I go into the document to make sure my data is there, I get that dreaded and popular message "Adobe Rights have changed and are no longer valid dialog box...
I never changed the original extended file to cause this..even when I don't add data but save to a new file anyway I lose the writable functionality.
A side note, I do not use LiveCycle and have been asked not to when creating these forms.
I did not have any problems with the forms that I had other people create and extend in Adobe Pro 8. It seems to be a Standard 9 and Pro 9 problem. Or, it could very well be me!
I use Reader 7 to test because these forms are for a volunteer organization and there are users on some early versions of Reader. II do not use earlier versions of Reader. This doesn't seem to be an issue in Reader 9. I cannot vouch for Reader 8.
I just had one of my form writers take my form that was done in Standard 9 and Extend Forms Fill-In via Adobe Pro 8. She initally received a message stating that the file appears to use a new format and it may not open or display correctly. I then got that same message when opening the extended version of the file. The document rights on the new form allow me to add comments and markup, a digital signature and save form data. Once I fill out the fields and try to save, also get another dialog box telling me that I need Adobe Standard or Professional to save (in this case it was 7 since I'm testing in Reader 7).
The forms that I am creating are initally PDFed by another party. The orignal forms are created in QuarkXpress 4.1 and PDFed using Acrobat Distiller 4.0 for Macintosh. I retrieve the files from a web site and save them to my hard drive to work on them. They are shared via email.
Any help would be greatly appreciated. I've spent the last week researching but no anwers to help me solve this particular issue with 9.

Interesting. I did just do the Reduce File Size and extended the document and there were no dialog boxes when I saved my data. The file size got larger instead of smaller and I received the message at the end of the Reduce File Size cycle that said " Enforcement of compatability to an earlier version of Acrobat has increased the size of some images". There is an image in the file, not one that I added, but from the original document. No change to the image either. No biggie to me. As long as my users can fill out the form and come back to it later to make changes, I'm happy!
Thank you. I think that solved it!

Indesign CS6 - 8.0 on iMac 10.9.1, a few issues that may be connected, Shutting down & PDF Issues

Indesign CS6 - 8.0 on iMac 10.9.1, I have a few issues that may be connected:
1. My computer shuts down goes to a black screen then restarts on its own.
2. My InDesign will crash when I am working and there doesn't seem to be a pattern it just happens sometimes.
3. I have an InDesign file that all of a sudden now takes 30-40mins to PDF 50 pages, I think there may be an issue with fonts but I am not sure, none of the other files take this long.

Thank you so much for responding Bob, I tried to update but when I tired I get a message "Contact Administrator if you wish to apply updates on your machine, Updates have been suppressed by the administrator...". I actually have admin rights and I called in my IT guy, he could not get it to update. The Application Manager says I have all current updates. Am I suppoes to update using "AdobePatchInstaller"? Is there a manual way?

My iPhone 5 has a grey-ish blue splodge on the screen. What is it and how can I get rid of it? The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it to hard, not that I remember.

The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it too hard, not that I remember. I noticed a while ago. Will it disappear? I can see the things that should be where the spot is eg it's on the keyboard and I can see the keys. Will this spread to the whole screen? How can u get rid of this?

If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4: - I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?

Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps.

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

2.0 Issue that I haven't read about yet

Similar Messages

Maybe you are looking for