2 Switches - 2 Routers - 2 ISP , I need to configure auto failover

Hello,
I need a help please.
I have 2 switches connected to 2 Routers and then 2 different ISPs.
     SW -----> Router(1) -----> ISP (Main)
      ||
      ||
     SW -----> Router -----> ISP (secondary)
on R1 I did this:
interface GigabitEthernet0/2
description TO_Internet_Switch
ip address <ip>  <MASK>
standby 1 ip (*WHAT TO TYPE HERE ?* ).
standby 1 priority 105
standby 1 preempt delay minimum 20
standby 1 track 1 decrement 10
duplex auto
speed auto
media-type rj45
negotiation auto
And
interface GigabitEthernet0/3
description "To ISPInternet"
ip address <IP> <MASK>
ip flow ingress
ip flow egress
duplex auto
speed auto
media-type rj45
negotiation auto
While on the secondary:
interface GigabitEthernet0/2
description TO_Internet_Switch
ip address <IP> <MASK>
standby 1 ip (*WHAT TO TYPE HERE ?* ).
standby 1 preempt
standby 1 track 2 decrement 10
duplex auto
speed auto
media-type rj45
negotiation auto
interface GigabitEthernet0/3
description "To ISPInternet"
ip address <IP> <MASK>
ip flow ingress
duplex auto
speed auto
media-type rj45
negotiation auto
Firstly I need answers ? Am I correct into this ? Kindly need you assistance. Thanks :)

Hello Sub,
It's well understood. Now I have configured the BGP on both routers as of :
router bgp 200025
bgp log-neighbor-changes
network <ip> mask <MASK>
neighbor <ip> remote-as 35753
neighbor <ip> password 7 03454F08265D2E1D1A
neighbor <ip> soft-reconfiguration inbound
neighbor <ip> prefix-list defualt in
neighbor <ip> prefix-list ANNOUNCE out
neighbor <ip> route-map ISP2-in in
neighbor <ip> route-map ISP2-out out
neighbor <ip> remote-as 200025
neighbor <ip> update-source Loopback0
neighbor <ip> next-hop-self
Am I right on this ?
Now, what are the commands that will make the auto failover work? where should be these command written? on Main router ? or both of them? what is the command.
I appreciate your help all.

Similar Messages

OIM 11gR2 PS1: Need to configure auto approval for self registration

Hi All
I need to configure auto approval for self registration in OIM 11g R2 PS1. I have done this in R1 but looks like it is different in R2.
Can you please guide me or point me to some blog/guide.
Thanks

check this link:
Developing Workflows for Approval and Manual Provisioning - 11g Release 2 (11.1.2.1.0)

Need to configure auto-complete off on large number of workstations

We currently have a large number of Acrobat Reader installs at our facility on various version levels. Is there a simple way to push the latest version of Reader to all clients and default to auto-complete off?
Also, is there a way to lock the auto-complete to the off state? We are a hospital and must not cache patient information in the forms due to HIPAA regulations.
Thank you!
Dave Pyatt
[signature deleted by host]

We currently have a large number of Acrobat Reader installs at our facility on various version levels. Is there a simple way to push the latest version of Reader to all clients and default to auto-complete off?
Also, is there a way to lock the auto-complete to the off state? We are a hospital and must not cache patient information in the forms due to HIPAA regulations.
Thank you!
Dave Pyatt
[signature deleted by host]

1 isp(T1), 1 unmanaged switch, 2 routers(WRT54G), 2 public ips

1 isp(T1), 1 unmanaged switch, 2 routers(WRT54G), 2 public ips - How should I connect everthing?
Help. I got a client with a T1 and multiple public IP's that he wants to share with his neighboring companies. How should I connect everying.

You need a manageable switch and create VLAN so you can segement the taffic between the 2 internet connections.

Setting up a hotspot / isp service need help!

Hello,
I came to the forum to seek help from experts in wireless fields and networking as I have an idea I would like to make come true.
The problem is I am not 100% sure what equipment I need nor do I have this set up corectly!
What I want is to build a hotspot all around my little town as:
myserver -> switch ->multiple routers with wlan antenas one for clients one to send signal -> far away switch with multiple routers and client antenas..
I know this does not make a lot of sence so I have made this sketch of how this would look like basicly I want to allow users to connect to my WLAN all around the town I live in (aprox 300 citizens).
Here is the sketch:
http://imageshack.us/photo/my-images/706/wifihotspot.png/
And my town:
http://www.tz-motovun.hr/Index/Motovun_3.jpg
In my sketch the problem that I am worried about is:
a) Would that be a correct way or should I use only routers or some different combinations?
b) What if 50 users connect on the switch "C" (not in sketch just fictional) and all this connection packets have to go to "B" than "A" than the server itself!
Would that slow things down a lot?
c) Later I would like to set up the server to be "buy and surf" software recomandations?
I am open to comments, ideas,solutions and any help I can get regarding this!
Please suggest me the hardware that would do the best job!
Thank you for your time!
Regards
Saša Benčić

jeffpas wrote:
And then says to edit the file '/etc/rc2.d/S76static-routes', but nothing about creating a script, or how to do it.
Now I'm really puzzled. Does the S76 matter, or can it be S[any number under the Sun]? Where in the world did the number 76 come from.All scripts that begin with 'S' in /etc/rc?.d are passed to /bin/sh with an argument of 'start' at boot time.
The numbers following allow for ordering. I would probably want a static route program to run shortly after the rest of networking comes up. But in most cases, it's probably sufficient that it runs at any point early in boot.
Why the hyphen, when the other article had none?Irrelevant. It's just a name to help identify the contents.
And of course, I could never check or prove if it worked, since I'm not allowed to reboot the box. I'd just have to wait and get fired later when it didn't.If it does the right thing when you do:
# /bin/sh /etc/rc2.d/<name of script> start
Then it'll probably work at boot. Also you want the script to exit (give you a prompt back). If the script stalls, then the rest of the boot process stalls as well.
The mystery ever deepens..........See also: /etc/init.d/README
Darren

Switches and routers in the rack

Hi guys,
I am mounting few switches and routers in a rack in our new office. I am new to this and was wondering if I can stack them all on top of each other or need some gap for ventilation?
The rack is in a server room which has proper ventilation and cooling.
Please share your experience. Thanks.

Remember this: Hot air goes up, cooler air goes down.
If you are trying to keep your appliances cool then rack-mounting them on the top is a useless exercise.
I normally rack-mount routers and switches halfway down the rack. I leave 1 RU between them to put cable-management. You can find 2RU cable management if you have thick cables or if you have a 48-port switch.
Another thing: Never, EVER, mix copper cable and fibre optic cable in the same cable management.
When it comes to copper cables, make sure you use "snagless" ones. Also, for the sake of future troubleshooting, make sure you use good brand cables like Panduit or Krone. Don't get "sold" by those cheap copper cables that are reputed to be "tested" and/or "GigabitEthernet ready".

Email Notifications for Switches and Routers

Dear All,
How may I configure switches and routers to send email notifications when link is UP/Down.
We have Switches - ((C3750-IPBASE-M), Version 12.2(25)SEB4) & Routers - (C2900-UNIVERSALK9-M), Version 15.1(4)M3.
Thanks in Advance,
Best Regards,
Taufeeq.

You can use EEM scrip to achieve the same. Just check EEM scripting in the community directory for some examples.
Regards,
Sathvik

Help! I synced my iCal from my old iPhone to iCloud. It worked great. I've done this because I'm switching to a Samsung phone and need to sync my iCal to my Google calendar. In attempting to do so today, my iCal is empty. How can I retrieve my iCal info??

Help! I synced my iCal from my old iPhone to iCloud. It worked great. I've done this because I'm switching to a Samsung phone and need to sync my iCal to my Google calendar. In attempting to do so today, my iCal is empty. How can I retrieve my iCal info??

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

Just switched from verizon to comcast and need help with me wireless.

Im on my basic setup page but i dont know how to configure it to work. if there is a step by step instuction page for this that would be great

You need to configure the router first as per the ISP settings.
Open the set up page of the router by launching an Internet Explorer Browser and type the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as admin and click on ok.On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button.
Now click on the sub tab ""MAC address clone""... Click on enable>>>Click Clone & click save settings ...Check WAN Ip on Status page of router .... If getting Valid Ip .... try going online...If not ... power cycle for 4-5 minutes & then again check the WAN Ip address ..... and try to go Online.
Message Edited by Wizzard on 01-10-2010 11:34 AM

I´d like to cancel my big CC plan and switch to photo plan. I need Ohotoshop, Lightromm and Acrobat, the rest are obsolete to me

I´d like to cancel my big CC plan and switch to photo plan. I need Ohotoshop, Lightromm and Acrobat, the rest are obsolete to me

Hi Tore,
You can follow the article: Cancel your membership or subscription | Creative Cloud to cancel your subscription.
Let us know if you still need any help with that.
Thanks,
Ratandeep Arora

I forgot my ipad lock code and when i tried to restore it from yhe itunes it keeps requiring to switch off my ipad finder, i need yo open it whatever is the way

I forgot my ipad lock code and when i tried to restore it from yhe itunes it keeps requiring to switch off my ipad finder, i need yo open it whatever is the way

You can turn Find My iPad 'off' by going to http://icloud.com and logging into your account, select the iPad from the device list in the 'Find My iPhone' section on that site, and 'remove from account'

Has anyone develped an EM plug-in for Cisco switches or routers

Folks,
Has anyone develped an EM plug-in for Cisco switches or routers? Please reply to this thread if you have developed one and would like to share your experience in developing this plug-in?
Thanks,

It's probably not the conversion from CMYK to RGB that's causing the problem, but color profile (ICC) embedding in Photoshop. Fireworks doesn't read color profiles. You might be able to create an action to remove the color profile in Photoshop and then batch process the images with it.

I am so tired of iphoto crashing, losing work I've done. I want to switch to photoshop elements 10 but need to know if it uses the iphoto library or if I can import that library into elements

I am so tired of iphoto crashing, losing work I've done. I want to switch to photoshop elements 10 but need to know if it uses the iphoto library or if I can import that library into elements

Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.

Rebooting switches and routers

Is it a good practice to reboot your switches and routers periodically and is there anything gained by doing this??

The only instance in which I would say this is unequivocally a good idea is one in which a known bug is causing, say, a memory leak which, uncorrected, will lead to a system crash. In that case, one would monitor memory usage and schedule preventitive maintenance reboots to forestall an unplanned outage.
Other than something like that, the practice of keeping one's IOS/CatOS relatively current (i.e., at least on a supported release) and analyzing new features for utility in your environment (or, more likely bug or vulnerability fixes) would more likely be the catalyst for introducing a new software version (and thus indirectly requiring a reboot to load the new code).
Hope this helps. Please rate it if it does.

Cisco Prime 2.1.2 auto sync config for switches and Routers

hello Support,
how to configure auto sync config in CPI? when the customer make a changes in the switches and Routers, the customer expect a new version of the configuration in CPI immediately. but we are getting the new version after 10 minutes. if we not configure in the switches and Routers to send syslog we are not getting anything.
where we have to configure in CPI to get the new versions immediately?
thanks!

Make sure you have completed the recommended preparation steps given in Before You Begin Installing the Patch.
If you are not using the Prime Infrastructure High Availability (HA) feature, follow the steps in Installing the Patch instead of the steps below.
If your current Prime Infrastructure implementation has High Availability enabled, follow the steps below to install the patch. You must start the patch installation with the primary server in “Primary Active” state and the secondary server in “Secondary Syncing” state.
Patching of the primary and secondary servers takes approximately one hour. During that period, both servers will be down. If you have trouble at any point, see Troubleshooting Patch Installs in HA Implementations.
Step 1 Ensure that your HA implementation is enabled and ready for update:
a. Log in to the primary server using an ID with Administrator privileges.
b. Select Administration > System Settings > High Availability , The primary server state displayed on the HA Status page should be “Primary Active”.
c. Select HA Configuration . The current Configuration Mode should show “HA Enabled”.
d. The Failover Type must be set to “Manual” throughout the patch installation. If Failover Type is currently set to “Automatic”, select “Manual” and then click Save .
e. Access the secondary server’s Health Monitor (HM) web page by pointing your browser to the following URL:
https:// <ServerIP> :8082
where ServerIP is the IP address or host name of the secondary server.
f. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
g. Verify that the secondary server state displayed on the HM web page is “Secondary Syncing”.
Step 2 Download the patch:
a. Point your browser to the software patches listing for Cisco Prime Infrastructure 2.1.
b. Click the Download button for the Release 2.1.2 patch file (pi212_20141118_01.ubf), and save the file locally.
Step 3 Install the patch on the secondary server:
a. Access the secondary server’s HM web page by pointing your browser to the following URL:
https:// <ServerIP> :8082
where ServerIP is the IP address or host name of the secondary server.
b. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
c. Choose the HM web page’s Software Update link. You will be prompted for the authentication key a second time. Enter it and click Login again.
d. Click Upload Update File and browse to the location where you saved the patch file.
e. Click OK to upload the patch file.
f. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
g. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
h. After the installation is complete on the secondary server, verify that the Software Updates page shows:
– In the “Installed” column: A “Yes” opposite the listing for this patch.
– In the “Pending Restart” column: A “Yes” for the secondary server. Do not restart the secondary server at this point.
Step 4 Install the patch on the primary server:
a. Log in to the primary server using an ID with administrator privileges and choose Administration > Software Update .
b. Click Upload Update File and browse to the location where you saved the patch file.
c. Click OK to upload the patch file.
d. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
e. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
f. After the installation is complete on the primary server, verify that the Software Update page shows:
– In the “Installed” column: A “Yes” opposite the listing for this patch.
– In the “Pending Restart” column: A “Yes” for the primary server. Do not restart the primary server at this point.
Step 5 Stop the servers in the following sequence, using the commands explained in Running Commands:
a. On the secondary server, run the ncs stop command.
b. On the primary server, run the ncs stop command.
Step 6 Re-start and monitor the servers in the following sequence, using the commands explained in Running Commands:
a. On the secondary server, run:
– The ncs start command to restart the secondary server. Wait for the processes on the secondary to restart.
– The ncs status command to verify that the processes on the secondary have re-started.
– The ncs ha status command to verify that the secondary state is “Secondary Lost Primary”.
b. Once the secondary server is in “Secondary Lost Primary” state: On the primary server, run:
– The ncs start command to restart the primary server. Wait for the processes on the primary to restart.
– The ncs status command to verify that the primary’s Health Monitor and other processes have re-started.
Once all the processes on the primary are up and running, automatic HA registration will be triggered. This normally completes after a few minutes.
Step 7 Once registration completes, verify the patch installation as follows:
a. Run the ncs ha status command on both the primary and secondary servers. You should see the primary server state change from “HA Initializing” to “Primary Active”. You should see the secondary server state change from “Secondary Lost Primary” to “Secondary Syncing”.
b. Log in to the primary server and access its Software Update page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.
c. Access the secondary server’s Health Monitor page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.

2 Switches - 2 Routers - 2 ISP , I need to configure auto failover

Similar Messages

Maybe you are looking for