2012 R2 CU1 client package problem

I recently applied the 2012 R1 CU1 update to my site and the updated client package was created. I have 3 DPs in my environment, 2 of those doubling as MPs also. I initially distributed the client update package to my combo MP/DPs (everything
says it completed OK). When I try to deploy that package to a collection the software center will see the advertisement, however trying to install it fails. The reason is because the content cannot be found on the DP.
I pushed the package to my 3rd DP, deployed, and was able to install the package from that 3rd DP. What is going on with the package on my other 2 DPs? I have checked the console/distmgr.log/etc logs, and I can see the package transfer. Looking
at the content lib I can see updated content go in when I push it. What should I do next to try and resolve this?

That doesn't change how content location works. Perhaps you have fallback enabled on the other content?
Have you reviewed CAS.log on the clients? The new support center tool for ConfigMgr can help in figuring out where the configuration issue is: http://blogs.technet.com/b/configmgrteam/archive/2014/05/06/system-center-2012-configuration-manager-support-center-tool-has-been-released.aspx
Jason | http://blog.configmgrftw.com
I will take a look at that log. Also, I thought that tool was just to gather up and bundle log files. Would I open them all in CMtrace to find where the issues are or is there some more logic to the software other than just log bundling?

Similar Messages

ConfigMgr 2012 R2 CU1 Client Installation fails during OSD Patch error 1635

Senario:
Single Primary Site A00, offloaded MP. R2 CU1 patch installed on primary site. Seperate "client with hotfix" package and distributed to offloaded DP.
OSD Task Sequence Installs the client fine as can be seen in the ccmsetup.log file ""<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="15:18:34.414-120" date="05-27-2014"
But then later in the same log the client iniated a repair, "<![LOG[Client (5.00.7958.1000) is installed and is the same or lower version. Initiating repair.]LOG]!><time="16:13:29.634-120" date="05-27-2014"
but at this stage fails to find the patch.
<![LOG[Repairing version 5.00.7958.1000 of the client with product code {8864FB91-94EE-4F16-A144-0D82A232049D}]LOG]!><time="16:13:29.666-120"
<![LOG[MSI PROPERTIES are REINSTALL=ALL REINSTALLMODE=vmous INSTALL="ALL" SMSCACHESIZE="15360" DISABLECACHEOPT="TRUE" FSP="<FSPName>" PATCH="C:\_SMSTASKSEQUENCE\OSD\A0000101\X64\HOTFIX\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP"
CCMDEBUGLOGGING="1" CCMLOGLEVEL="0" CCMLOGMAXSIZE="52488000" CCMLOGMAXHISTORY="5" SMSSITECODE="A00" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"
CCMCERTID="SMS;624660EDFE6E9C9EFD4653520218B5D17010D8B9" REMEDIATE="true" SMSPUBLICROOTKEY=0602000000A4000052534131000800000100010069B181EEACA1796DFF9D19D79BDE85CEC5C334A798A0E47EDF29E0F976B70A62A6772C69277575F6134756C56D6E5EE299832009EE3D7C9D3C313C85DCF2E05163A67C442F85F411BCE506EDD3B728320C76C65F6578974201F1E9C7095D61055E33D0C9E7AC56F271530B6E3750B94B93B69A5F6912914FCF4B35E160AD8D7D1F60481071BB49F8BB2B8BDB3F3F8871E057AF1149E21722896689175F43093CC2183835848A08ACB3AEA77E4B7C7F3D8A915948581B0280860F1A383BCDBC6865AF0FA4984C93CE40EDC752D88A76BA25A5ED0891682006B8B276ACF220560EF606879EF5AB3517C222C59016C96D5D1D1B98848B4D9C2B479C9335903101E5]LOG]!><time="16:13:29.681-120
Error in the repair-msi log states, "Unable to create a temp copy of patch 'C:\_SMSTASKSEQUENCE\OSD\A0000101\X64\HOTFIX\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP'." " MainEngineThread is returning 1635"
By creating a share on the primary site and referencing the share as the patch loacation solves the issue.
PATCH=<a href="file://\\\<HOTFIXShare>\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP">\\<ServernName>\<HOTFIXShare>\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP.
Obviously its not ideal for the CU1 client msp to be installed over the WAN. Can anyone explain why:
1. The client seems to need a repair
2. Cannot access the MSP file when available locally on the client in the "'C:\_SMSTASKSEQUENCE" folder.

I always fall back to use this method, when dealing with hotfixes in a task sequence:
http://www.scconfigmgr.com/2014/03/26/install-kb2910552-hotfix-for-configmgr-2012-r2-client-during-osd/
It may be worth a shot to try it out, if you haven't already.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

SCCM 2012 SP1 CU1 Remote tools problem on device client settings.

After i removed remote tools on device client settings, i can't remote(RDP) my domain controller and member servers anymore, how can i fix it?.
Thanks a lot in advance.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 R2 CU1 Client updates but not showing in Admin Console

I have updated my 5.00.7958.1000 client to Cumulative Update 1 (KB2938441). If I look on the client the version now says 5.00.7958.1203. My admin console when I click on the client still says 5.00.7958.1000. I tried update membership. It has
been a couple days since the update on the one. Another was early this morning. I have updated using the Patch and software package deployment. I have used the push installation to upgrade. In all cases, upgrade works, but in the console
the client versions are not changing and keeps saying version is the same.
Why wouldn't it update by now? This is crazy the time it is taking to show a new version has been installed/upgraded.
What process needs to happen? Are there specific logs for this data coming back to the console I can check?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

We are a school district so the majority of our clients are intranet. Our WAN is connected with Gigabit connections. Single sccm primary site at center of the hub-n-spoke network topology. Server running Windows server 2012 w/ 4cpu and
16 GB RAM. Server running in VMware so we can easily increase spec if needed, so more interested in what the "common" configuration may be so I can test it with those settings first and adjust accordingly.
We have 3,500 clients, only 800 of which may go home the other stay on network at all times. A large number of those 3,500 are laptops that are in carts so they are not left on all the time so the different processes need to be somewhat frequent.
Additionally, it will be almost never that all those machines are on at the same time. Many could be sitting shutdown in the carts.
Please offer your opinion as to what good settings might be. I know they may not be perfect, but I can test them out.
Also checking the Client Settings under Administration workspace, I don't see all the same type of actions I do under the Client computer -> control panel -> configuration manager -> Actions tab. Are these configured elsewhere
or do they all fall under the "hardware inventory" and "software inventory" sections of the Administration -> Client Settings?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

OoB Problems with SCCM 2012 SP1 CU1

Hi around, perhaps somone has tried this things out already and has a little hint for me.
After we got OoB Managment to work under SCCM 2007 we switched to SCCM 2012 now i have some problems bringing it to work again.
We use a Verisign Certificate for Provisioning, the Firewall Ports (9971 on Server and 19992, 16993 and 16995 on Client) are opend. The autoenrollment is active. DHCP 06 and 15 are set and configured.
The IIS SSL Settings are configured to accept Client Certificates and the Bindings are set to the Web Server Template. We tried to configure it using the Verisign Certificate but it didn't work that way either.
The Webserver Template is build after the Step by Step guide from MS.
The Verisign Certificate was build the same way, Organization Unit is set to Intel(R) Client Setup Certificate. It was imported in the Personal Certificate Store, exported and implemented in the Enrollment Point.
The AD Group exists and the Oob Managment Server has the permissions it needs.
The Oob Managment Point was configured like shown in the MS Step by Step guide.
The Client i'm testing with was fully unprovisioned.
Now the only Status i get is detected and when i try to discover AMT the amtopmgr.log brings the following errors.
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
**** Error 0x1e5ab3d0 returned by ApplyControlToken SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoSoapDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
**** Error 0x1e5ab3d0 returned by ApplyControlToken SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoSoapDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 11001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 11001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 484001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoKerberosWSManDiscovery failed. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://10.37.135.52:16993 , 15001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://10.37.135.52:16993 , 15001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Discovery to IP address 10.37.135.52 succeed. AMT status is 1. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CSMSAMTDiscoveryTask::Execute, discovery to OurMachine succeed. AMT status is 1. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CSMSAMTDiscoveryTask::Execute - DDR written to D:\CM2012\inboxes\auth\ddm.box SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='OurMachine.test.de' P2='' P3='' P4='' P5='' SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CStateMsgReporter::DeliverMessages - Created state message file: D:\CM2012\inboxes\auth\statesys.box\incoming\vww2tcjc.SMX SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Succeed to run the task OurMachine.test.de. Remove it from task list. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Work thread 3624 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Work thread 3624 exiting. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Current size of the thread pool is 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 9236 (0x2414)
We double checked the admin Account in the OOB settings but the password is right and i can manually log in to the MEBX with it.
Has anyone some suggestions what could be wrong?
Thank's for the help.

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
By the sounds of thing the problem is with your certificate. Can you manually provision a Certified to any of these systems?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Remove sccm 2012 client package from task sequence

Hello, is possible to remove the sccm client package from task sequence ? i am deploying OS to workgroup computers and i dont want install the sccm client . I am using MDT to create the task sequence.
Erickson Martinez

No, if you are using a task sequence in ConfigMgr (MDT integrated or not) then a client package is mandatory. The only way to get rid of the client is to deinstall it at the end of the task sequence (for example by using the SMSTSPostAction variable).
Another option, if you don't want the client, is to use MDT to deploy those machines. But that would cause an extra deployment mechanism to maintain.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Can I install directly R2 CU1 client agent when using manual client push install

Hi :)
I've done SCCM 2012 R2 CU1 update and created collections and package to deploy to that collection and update clients, but can I install directly to client R2 CU1 version ?
Now I've first run manualy client push install which install RTM version on client. After some time client shows up RTM version in console.
After that I have to wait that collection with RTM version be updated and update package deployed to that collection and than wait for heartbeat discovery so that client agent version is updated in console.
So, is there any shortcut ?
Thank you
Best regards
Nenad

I know the product team is looking at ways to make this stuff easier. I wrote an article a couple months ago that talked about ways they could simplify the CU process:
http://myitforum.com/myitforumwp/2014/02/10/five-future-configmgr-usability-wins/
You could help by voting up the issue on Microsoft Connect:
https://connect.microsoft.com/ConfigurationManagervnext/feedback/details/817080/dcr-usability-win-simplify-the-quarterly-cumulutive-update-process
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Locked SCCM Client Package waiting for prestaged content, Cant use Client Push

Hi there,
I am having an issue with client push. When initiated the client is unable to find the client install package on the DP. The CCMSETUP log file on the client reads "MP xxxxx.xxx.com didnt return DP locations for client package with the expected
version". This could be caused by a boundry issue but the boundry information is set up correctly, and published into AD.
The SCCM Client on the site server is not getting replicated properly to the DP's that we have setup and I think that this is causing the issue. The reason why its not gettiog to the DP is due to this error: "Distribution Manager is waiting for Package SG100001
content to be prestaged on the distribution point" when we look at the content status of the SCCM client Package.
We are unable to change the prestaged distribution point settings "automatic" as the package is the locked as its the SCCM client installation package and its waiting for us to prestage it on the DP. I have tried prestaging it, but it didnt
work
Any ideas as I have been stuck for two days on this now...
Thanks in advanced.
George

Torsten you were right, The solution was as follows for anyone else having the same issue.
As soon as you create a DP it appears that the client installation package automatically tries to distribute to the DP. If you created the DP as "Enabled for Prestage" while doing the setup then the SCCM client package will just wait for you to
copy it manually. To reslove this I had to remove the "Enabled for Prestage Content" from the DP then go into the SCCM client Package, content location tab, select the DP and redistribute the package to the DP.
Checking the Distribution Manager and PkgXferMgr.log assisted me in monitoring the content transfer to the new location.
Thanks for your assistance.
George
George, I too concur that this fixed the issue.
I had the same problem with my SCCM 2012 R2 CU4, where i updated the distribution point for the Configuration Manager Client Package. Thanks a million!

Prestage content no longer working after SCCM 2012 R2 CU1 update

I run SCCM 2012 R2 CU1 on a Windows 2008 R2 server.
I upgraded to CU1 in June, and today is the first time I've attempted to pre-stage a package since then. After pre-staging my package and getting the content out to the target DP, I went to properties of the DP, checked the box "Enable this
distribution point for prestage content", then hit Ok.
Next I went to distribute the content to the DP, however after going thru the wizard, nothing changes. There is no pending status, waiting on prestage content, that I had seen in the past when doing this task. I can go in and run the wizard
again, and the target DP shows up in the list, like I'd never initiated the push before.
Normal (non-prestaged) distributions work fine.
In troubleshooting this, I also noticed that I looking at the site status of the target DP, there are no status message entries for since I upgraded to CU1 (for that matter, none of my DP's have any entries since CU1). I did see a similar issue like
this in the forums
http://social.technet.microsoft.com/Forums/en-US/9491c2b1-37e6-46e3-9bb0-c5d673490d8a/component-status-not-updating-since-upgrade-from-sccm2012-sp1-cu3-to-sccm2012-r2?forum=configmanagergeneral but I don't have a backed up stat.mgr\retry inbox, it's empty.
I think this is related to why I can no longer prestage content, but I can't seem to find a reason for it. The fixes for R2 CU2 don't mention my issue here either
Anyone else seeing this?
Tony

Hi,
Please check SmsAdminUI.log and Smsprov.log after you distribute the content to the DP.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

9.0.5.1: Puzzled by classes in client packages

Currently we're using 9.0.3.3.
We started to look into 9.0.5.1. Now, when the migration is done, there are lots of new client packages containing ...Client and ...RowClient classes.
This is completely new to us. And we have problems with these classes too.
We use our own ViewObjectImpl/ViewRowImpl classes and have our own interfaces extending ViewObject and Row.
When my VO interface extends our own Row interface instead of oracle.jbo.Row then I cannot compile since methods are missing in the ...Client classes. I have to move every single method manually to the right in the wizard. I cannot shuttle the whole interface, since then the methods in oracle.jbo.ViewObject are also created in the ...Client class but some of those methods are final in oracle.jbo.client.remote.ViewUsageImpl (like isInternal()).
Another example:
An abstract VO of ours implements VieObject and a custom interface we defined. These methods are missing in the ...Client class too. And I cannot shuttle those methods to the right in the wizard, because they don't show up. And I cannot shuttle the interface in "Interfaces" because it doesn't show up either.
So what's the deal with the classes in client? Could someone please elaborate?
Do I really need those if I run in local mode? Why is it that my custom interface doesn't show up? I don't get it.
Thanks in advance,
Sascha

I have 9.0.5.2 up and running and created the classes exactly like I think you have said in 9.0.3. I took the liberty of assuming that the purpose of IFormContext was to return a FormContext object.
package test;
import java.io.Serializable;
public class FormContext implements Serializable {
public FormContext() {}
package test;
import oracle.jbo.ViewObject;
public interface BaseViewObject extends ViewObject {
public void baseVOMethod();
package test;
import oracle.jbo.server.ViewObjectImpl;
public class BaseViewObjectImpl extends ViewObjectImpl {
public void baseVOMethod() { }
package test;
public interface FormContextView extends BaseViewObject {
public void   formContextMethod();
package test;
public class FormContextViewImpl extends BaseViewObjectImpl implements FormContextView, IFormContext {
public void   formContextMethod() { }
public FormContext getFormContext() {
     return null;
package test;
public interface IFormContext {
    FormContext getFormContext();
}Then, I created a DeptView and set FormContextViewImpl as its Object class and (OK)'d the wizard.
When I go back into the wizard, I see:
test.FormContextView
test.IFormContext
in the list of Available interfaces.

GroupWise 2012 SP2 Windows Client - Windows 8.1 x64

I have installed GroupWise 2012 SP2 Windows Client on a Windows 8.1 x64 laptop.
I can run GW for the first time, and it works fine.
When I close GW, and then reopen it I get the following error:
GroupWise is not properly installed. The GroupWise components could not be initialized. Please run GroupWise setup, or contact your system administrator.
A reboot will not fix the problem. If I completely remove GW and then reinstall it works fine, however once you close GW and then reopen it, you get the above message again.
Does anyone have any ideas?
Thank to everyone in advance.
Cheers,
Anthony Hill
Network Administrator
Mount Alvernia College

Originally Posted by konecnya
In article <[email protected]>, Anthonywhill
wrote:
> Yes I have the entire Office 2013 suite installed. Maybe Outlook is the
> problem?
>
Possibly, which was installed first?
Both Outlook and GroupWise use MAPI, and the files Outlook places are the
newer one, but it doesn't always do so if the older ones are in place.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!
Hi,
I have the same problem.
You resolve your ?

Update membership is taking too long to update members in the collection - SCCM 2012 R2 + CU1

Hi,
We have a standalone primary site server hierarchy (SCCM 2012 R2 + CU1), Not only with this upgrade.starting from the SCCM 2012 SP1, We had an issue that members in the collections are not being updated as expected (like SCCM 2007).
I have created about 20+ query based collections with the normal with the "Full schedule" option but not used "Incremental update" option. Also i have observed that after a day or so..members are appearing.
anyone had solution to this, why this collection update membership in SCCM 2012 is improper?
Thanks.
srkr

Hi Torsten,
We have about 25 machines in each collection, My collection condition is based on the package (Ex:if the package is not installed on the machine, it will appear in the collection to target the package),
WQL query looks good, I have used the same logic for all the collections with different package.
I did not see any error in colleval.log, all the collections are evaluating properly,but I can see .CEP files in COLLEVAL.BOX which has 0 KB size.
Any Idea?
srkr

Instant Client Package - SDK, RPM package download not working

Hi,
I am trying to download "Instant Client Package - SDK", RPM package for Linux 32 bit, version 11.2.0.1.0 from http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxsoft.html
However the file downloaded has zero length. I tried from two different computers. I cannot find any contact/form to report broken content on that website. Can someone help, please?
Cheers, Tomas

fyi
For me, the page ...
http://www.oracle.com/technology/software/products/database/index.html
... currently says ...
"An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator"
But, with the direct URL to the ZIP, which failed to download before ...
http://download.oracle.com/otn/nt/oracle10g/10201/10201_companion_win32.zip
... I was able to download it just now.
regards
Jan

2012 R2 CU1 client package problem

Similar Messages

Maybe you are looking for