Prestage content no longer working after SCCM 2012 R2 CU1 update

I run SCCM 2012 R2 CU1 on a Windows 2008 R2 server.
I upgraded to CU1 in June, and today is the first time I've attempted to pre-stage a package since then.  After pre-staging my package and getting the content out to the target DP, I went to properties of the DP, checked the box "Enable this
distribution point for prestage content", then hit Ok.
Next I went to distribute the content to the DP, however after going thru the wizard, nothing changes.  There is no pending status, waiting on prestage content, that I had seen in the past when doing this task.  I can go in and run the wizard
again, and the target DP shows up in the list, like I'd never initiated the push before.
Normal (non-prestaged) distributions work fine.
In troubleshooting this, I also noticed that I looking at the site status of the target DP, there are no status message entries for since I upgraded to CU1 (for that matter, none of my DP's have any entries since CU1).  I did see a similar issue like
this in the forums
http://social.technet.microsoft.com/Forums/en-US/9491c2b1-37e6-46e3-9bb0-c5d673490d8a/component-status-not-updating-since-upgrade-from-sccm2012-sp1-cu3-to-sccm2012-r2?forum=configmanagergeneral but I don't have a backed up stat.mgr\retry inbox, it's empty.
I think this is related to why I can no longer prestage content, but I can't seem to find a reason for it.  The fixes for R2 CU2 don't mention my issue here either
Anyone else seeing this?
Tony

Hi,
Please check SmsAdminUI.log and Smsprov.log after you distribute the content to the DP.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Internet sharing no longer works after Lion 10.7.4 update

    Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

    so here is da answer
    1. go to finder>(computer name)>macintosh HD>library>preferences
    2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
    3. restart mac and device which you share intenet to
    then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
    then, just wait for apple to release da 10.7.4 fixed
    please use da steps!

  • Error while Creating Prestage Content File for Application in SCCM 2012

    Hi All,
    I am using SCCM 2012 SP1 on Win 2K8 SP R2 box. Database is SQL 2008 R2 SP1 CU6. I have trying to create Prestaged content for Applications for extracting pkgx files on DP's. I am getting the below error message for random applications(not for all applications
    but for random applications).
    Content that will be included into the prestaged content file (1):
    Citrix Receiver 13.3.0.55
    Export all dependencies: 'Yes'
    Selected distribution points: 'MPSERVER.GS.WORLD.PRESS.COM'
    Prestaged content file: 'G:\pkgxfiles\Application\Citrix Receiver 13.3.0.55.pkgx'
    　Error: Distribution is currently in progress for selected packages: HM0000D9. Please wait and try again
    But if I see this application is successfully distributed to 2 of the distributions points long ago. If I reupdate the Distribution point and then again try to create prestaged content for this application then pkgx file for that application is getting
    created.
    Why this is happening and how can I resolve this?
    Thanks & Regards Uttam

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • After SCCM 2012 R2 CU4 update Client won't report status message back

    We had SCCM 2012 R2 CU3, just updated it to CU4 (all site servers and clients) last week.
    Right after the clients received the CU4 update (no reboot), I saw these started popping up the event log:
    The ConfigMgr Client encountered a certificate for Management Point SCCM that could not be verified.
    I checked online and it has to do with trusted root key mismatch, but there was no site change. The only thing we did was upgrading from CU3 to CU4. 
    Right now the symptom is that all these clients do not report status messages back to the MP so we have no idea how our deployments would go.

    i am having what i think is a similar issue. i upgraded to CU4 and the only clients to report back in are my SCCM site server and my only DP server. no clients have reported in since. i checked a few clients and they did get the CU4 client update
    and installed it but they are not reporting back
    I have pretty much the same situation.
    A successfully upgrade to SCCM 2012 r2 cu4 on the primary site.
    Deployed the cu4 to a few computers which was successfully. Later I also deployed the cu4 to the primary site server and it turned out to be the only computer reporting back with the proper client version.
    There is no errors or warnings in the event logs which could explain this strange issue. As far as I can tell the clients is operational but they are just not reporting back with the proper client version. A quick look at the sccm client
    logs has also not revealed the root cause.
    Any ideas would be appreciated a lot.
    Per Dahl Christiansen

  • My car dock is no longer working after iOS 4.3.2 update...help!!

    I have an after market car dock that normally plays music through my car speakers and charges my iphone. After the most recent iOS update it still charges but does not play music. Any ideas?

    Sometimes after iOS updates older tech or even off brand tech may not be supported. I use an older Griffin car charger with an iPhone & iPad and it won't charge because it is not supported. Maybe get a new dock or an Apple approved product, it kinda irritates me as well not being able to use off brand tech. Its cheaper than brand name products...
    Hope this helped

  • IBCM not working after SCCM 2012 R2 Upgrade from SP1

    Just upgraded to CM2012 R2 from SP1, 1 primary site and 1 internet facing MP for IBCM in DMZ - both are on Server 2008 R2.  PKI has already been setup and was functional before upgrade.  After R2 upgrade, my internet clients cannot
    communicate. CcmMessaging.log on the client states: "Post to https ibcmsiteserver,domain,com/ccm_system/request failed with 0x87d00231".  LocationServices.log shows: "LSUpdateInternetManagementPoints: Failed to retrieve internet
    MPs from MP ibcmsiteserver,domain,com with error 0x87d00231, retaining previous list"
    (Had to edit the links to allow post)
    Has anyone run into this before and how do I resolve it?  Thanks,

    CRL checking setting was enabled, not sure if this was enabled before the upgrade or not.  Once I disabled CRL checking, the internet client still wouldn't communicate until it was connected to the domain network and received the new policy settings
    (I assume). 
    Now, the question is how do I update the rest of my internet clients without them connecting to the domain network?  (VPN is not an option)
    Thank you for the help!!

  • IPhone no longer works after iOS 5.0.1 update

    My iPhone 4 no longer recognizes its SIM card after updating from iOS 5.0 to 5.0.1.
    I followed the instructions in the article on the official Apple support site. Removing and reinserting the SIM card did not help, so I used iTunes to reset the iPhone.
    The result is that after switching on, the iPhone tells me that there is no SIM card in the slot (even if there there is) and that I should insert a SIM card with no PIN lock into the slot.
    I do not have a SIM card with no PIN lock.
    My phone company only distributes SIM cards with a PIN lock.
    What can I do now?

    I had this issue too. I did an OTA update.
    I tried turning off my iPhone, removed and reinserted my SIM and turning it on again a few times without success. I also inserted my wife's SIM, it was OK. When I tried with mine again, it was not. I also tried going in and out of Airplane Mode too without success.
    Afte a bit of trial and error, I finally got it to work.
    What I did was:
    1. Turn off WIFI.
    2. Turn off my iPhone.
    3. Removed and reinserted my SIM.
    4. Turned on my iPhone. Almost immediately I saw the  "3G" indicator and after a couple of seconds, my SIM worked!
    5. Turned WIFI back on.
    From my issue, it seems the iOS 5.0.1 update got "confused" with the network setup.
    HIH.
    Andrew

  • Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

    Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
    Some other potentially relevant information:
    1- The Boot Camp icon is no longer present in the Windows System Tray.
    2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
    3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
    4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
    I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
    Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

    Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
    Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
    Will keep you posted on any progress I make.
    Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

  • Gmail no longer works after iOS 6.1.3 update

    I just updated my iPad 3 to iOS 6.1.3 and immediately noticed that when I tried to open the mail client, it would launch and shut off.  Turns out that I had to delete all of my gmail accounts and then the mail client worked.  I tried to add the gmail accounts back but now I get the following error:
    The IMAP server "imap.gmail.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server" field.
    The strange part is that I also updated my iPhone 5 and everything works fine, including gmail!  I check the setting between the two devices and they are the same.
    Apparently, many have reported these types of issues over the past few days.  However, I've yet to see a solution.  Apple hasn't seemed to have responded at all.

    JimHdk,
    Not sure what the issue is...like I said, my iPhone works fine with the 6.1.3 upgrade, the iPad doesn't...only after the updgrade.  Additionally, other's have reported the same issue with gmail.
    https://www.google.com/#hl=en&sclient=psy-ab&q=ios+6.1.3+gmail&oq=ios+6.1.3+gmai l&gs_l=hp.3...626.4887.0.5057.15.15.0.0.0.0.232.1902.4j10j1.15.0...0.0...1c.1.7. psy-ab.O_GfIONYv3U&pbx=1&bav=on.2,or.r_qf.&bvm=bv.44158598,d.dmg&fp=a4b1ae1098b9 eca0&biw=1486&bih=683

  • Wireless printing no longer working after installing HP 2.7 update

    I have been using wireless printing from my Macbook Pro (running Lion OSx 10.7.2) fine until yesterday when it just stopped working out of nowhere. From looking on the forums it appears that this is probably a result of the HP 2.7 update (which I also had the issue of continuously re-appearing in my software update list even after installing it multiple times - though i was able to resolve this courtesy of this forum). I've tried re-installing the printer multiple times and it works fine when connected via USB, it acnowledges that the printer is connected to the same wireless network as my computer bu

    OK, before you dive any more into the registry, a simple question. Did you try uninstalling iTunes, rebooting, and re-installing iTunes?
    I do have an entry for 'iTunes.Application.1' (below). However, I'm sure there are many more registry entries related to iTunes. In other words, adding this entry will probably not be sufficient to restore the COM functionality.
    Windows Registry Editor Version 5.00
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}]
    @="iTunes Class"
    "AppID"="{F98206B5-F052-4965-9FA0-85F61BC3C19D}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}LocalServer32]
    @=""C:\Program Files\iTunes\iTunes.exe""
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}ProgID]
    @="iTunes.Application.1"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}TypeLib]
    @="{9E93C96F-CF0D-43f6-8BA8-B807A3370712}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}VersionIndependentProgID]
    @="iTunes.Application"

  • Safari no longer works after the 10.5.3 Update.

    I'm apparently having the same problem with Safari that I've noticed many other people on here are having.
    When I try to open Safari after having installed the 10.5.3 Update it goes straight to "Application Not Responding" and I have to force it to quit.
    So I figured a fresh Safari 3.1.1. install would do the trick. However, when I try to install that it tells me "You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer." at the select a destination step.
    I haven't been able to solve my problem through the things I read in any of the other similar threads. Help?

    MacSavage wrote:
    I cannot create a new thread on this forum in Safari, however. It works in Firefox, but in Safari there is no button (link) to create a new thread.
    *Hi M'S', Welcome* to Apple's Users Help Users Forums.
    A bit of a puzzler there. The button to create a new thread is *not in Safari, it's on the forum page.* (Not the Categories page, a bunch of folders, a level too far back.)
    Good Luck, JP

  • Tile Vertically no longer works after Acrobat 10.1.10 update.

    Is anyone else having the same issue?  I open 5-10 PDFs at a time, and then hit Ctrl-Shift-L to Tile them Vertically, and it Tiles them Horizontally instead.  Even choosing it directly from the menu (the slow way) doesn't work.  Tile Horizontally still tiles them horizontally, but that's not helpful to me.

    so here is da answer
    1. go to finder>(computer name)>macintosh HD>library>preferences
    2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
    3. restart mac and device which you share intenet to
    then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
    then, just wait for apple to release da 10.7.4 fixed
    please use da steps!

  • FaceTime no longer working after 4.3.4 software update.

    I updated my ipod touch to 4.3.4 and ever since facetime no longer connects with the other person. I click call and it says the persons name and directly underneath it says "FaceTime..." as if it were calling the person, but it clearly is not. Somebody please help!

    You're not alone, we're having exactly the same problem, see this thread over here http://discussions.apple.com/thread.jspa?messageID=13197799. Exchange profiles with certs broken by the iOS 4.2 to 4.3 upgrade.

  • Many Apps are no longer working after webOS 1.4 update! - please help!

    Hi,
    Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
    Here are the ones that just return a blank/white screen after launching so far:
    SplashID
    Daily Devo
    Daily Light (Love)
    Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
    These are just a few of the Apps that I am having problems with and there are probably many others.  I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
    Anyone else experiencing this issue as well with any Apps?
    Thanks in advance for any help that you can provide.

    SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password.  I see no update for it in the App Catalog.
    EDIT: Never mind.  It appears that it only did that on the first launch.  I closed it and restarted it, and now the screen in SplashID is correct.

  • Links no longer work after signing document

    Links no longer work after signing document - I have updated to latest version and run installation repair, is this a problem or is it supposed to do that?

    Hi;
    This question would be best asked in the Acrobat signatures Forums, it is related to using Adobe Acrobat/Reader and does not have anything to do with the online service, Adobe Fill & Sign.  Someone should be able to answer your question here: https://forums.adobe.com/community/acrobat/security_%26_digital_signatures
    Thanks,
    Josh

Maybe you are looking for