24 hr. later

my Imac still want serial codes for all applications.
Hosts file is clear, no blocking software installed.
On my fresh installed Macbook Air - all apps are licensed ok - only Photoshop want serial code...
What to do with the imac? I tried the help, not noting helped. Do i need to reinstall LION?

> Uninstall the Application.
> Run the Adobe Cleaner Tool.
> Download PS CS6 from Adobe.com
> Use your adobe id to register and install PS CS6.
Let me know if that does not work.

Similar Messages

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

Install Windows 8.1 Pro on Mac Mini Late 2014

I'm trying to install Bootcamp on my Mac Mini. Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS.
This is my setup:
1. Mac Mini Late 2014 with 2TB Fusion Drive.
2. Windows 8.1 Pro x64 full version ISO downloaded from Microsoft Store.
3. Sandisk Extreme Flash Drive (I have tried both 16GB and 64GB).
4. Bootcamp partition = 500GB.
5. Other USB devices plugged in: Corded USB Mouse and Apple Extended Keyboard (both of which are required to enter the serial number and navigate the installer window).
6. No additional storage devices of any kind are connected aside from the internal Fusion drive and the installer drive.
7. Booting from the EFI portion of the Bootcamp created Windows installer.
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
If you have any other tips, please let me know.
I have installed or helped other people install bootcamp many times over the course of the past 2 years. Every single time it has caused endless headaches and literally weeks of wasted time.
I have read endless posts on what is causing these problems. I will consider summarising these for anyone else having the same problems. Everyone has their theory so far about this Bootcamp nightmare, but so far there doesn't appear to be any one magic solution.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
If you have any better idea, please let me know.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
Cheers,
Paul

Paul@Sydney wrote:
7. Booting from the EFI portion of the Bootcamp created Windows installer.
The FAT32/NTFS partition is usually not adequate for an EFI install. You can delete the BCA-created partition and create a Disk Utility partition which is formatted as Free Space. This will be split into an MSR and MSD. Fusion drives create problems, especially if the BC partition lies outside the traditional MBR 2TB boundary.
Before you delete the BCA-created partition, please post the output of
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo gpt -vv -r show /dev/disk1
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
Windows installers up to W8.1 do not have USB3 drivers. These are installed after Windows is installed and BC drivers are in place.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
The requirements are pretty strict when installing Windows. Any deviations cause headaches and grief.
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
The USB is usually the issue.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
After Windows is fully installed and BC drivers are in place, log into Windows, right click on it and rename it on the Windows side. It cannot be renamed on the OSX side with diskutil renameVolume. Here is an example sequence. You cannot rename volume during the installation process.

A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

A few days ago i bought the macbook pro in a Providence. In late Summer i will come back to my Country - Ukraine. I would like to know about a tax for my
laptop. Can i return tax? Through the TAX FREE or return in airport? What should i do?

You need to talk with the tax authorities in the countries to which you traveled and that of your home country. We are all end-users liek you and not Apple agents.

Memory upgrade on iMac (Late 2006)

I want to upgrade the memory on my iMac (Late 2006). My present memory is 1GB 667 MHz DDR2 SDRAM. I am getting that information from the System Profiler. That (one) module is in one Memory Slot, and the other Memory Slot is empty.
The manual says the following:
+Your iMac comes with at least 1 GB of Double Data Rate 2 (DDR2) Synchronous+
+Dynamic Random Access (SDRAM) memory installed. You can add 1 or 2 gigabyte (GB)+
+memory modules for a maximum of 3 GB of memory. Memory modules must meet the+
+following specifications:+
+* Small Outline Dual Inline Memory Module (SO-DIMM) format+
+* 667 MHz, PC2-5300, DDR2 compliant (also referred to as DDR2 667)+
+* Unbuffered and unregistered+
And it also says the following:
+Your iMac has a top slot and a bottom memory slot. You can add a memory module to+
+the bottom slot and remove the memory module in the top slot to replace the+
+installed memory. You can add a 1 GB or 2 GB memory module for a maximum of 3 GB+
+of memory.+
I guess I should just do as Apple suggests and add a 2GB module to the other memory slot, to maximize the total memory in the computer at 3GB. But does anybody have any alternative experiences or suggestions? Should I perhaps add another 1GB module to the other Memory Slot so that they are both equal? Has anybody tried adding 2GB to each Memory Slot? What happens? It seems odd or unbalanced to have a 1GB module and a 2GB module as Apple suggests. Any opinions from people experienced in this would be welcome, and I thank you in advance.

Hi rosalarose
To check how much memory you have and your memory usage go to: Applications > Utilities > Activity Monitor and select System Memory.
Your problem sounds more like a Software problem with Safari than a Hardware issue with the Memory. Instead of piggybacking on someone else's thread you should post a New Topic of your own here or in the Safari section of the Forum with a more detailed explanation of your problem.
http://discussions.apple.com/forum.jspa?forumID=876

What do I need to connect my late 2009 Mac book (mini display port) to the TV and get sound?

I'm totally confused!
I have a late 2009 model Macbook. And I want to connect it to my TV.
So my research has led to believing I need a Mini display port adapter and a HDMI cable - but from some of what I have read, this won't carry sound...
Can anyone clarify this and what I do actually need?

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with theHDMI.
If you have the Late 2009 model 6,1 White Unibody with the MiniDisplay Port there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

Mini Displayport to vga adapter on MacBook pro 13" late 2011. No signal on external monitor

Hi
Connecting a Late 2011 MacBook Pro 13" to an external monitor, trough mini Dispalyport to vga adapter, i see "no signal" messagge on external monitor, even if i get it as secondary monitor on Preferences > Monitor of my MacBook it's visible (i can change resolution, position, clone screen, ecc.).
Any suggestion? somebody found the same problem?

Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor)

Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
But I'm afraid that the MacBook might not support the adapter.
Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

Internet Problem - One site will load, another won't. Then mintues later, the site that previously would load won't and the one that wouldn't will. I'm also pulling up a lot of pages in all text. Pics won't load or only one will load and the rest won't...

Several weeks ago, I began to have some very strange internet connection issues. All the lights on my modem stay on and my computer shows full wi-fi signal, but I suddenly I won't be able to load any pages. Other times, I'll be able to load pages from one site, but not another. It's not the same sites all the time though.... sometimes I'll be able to load pages from one site and not another, and then 5 minutes later it'll switch and I'll be able to load pages from the site I previously couldn't and I won't be able to load pages from the site I previously could. A lot of pages are coming up just text with no pics... and then 5 mintues later that site will load normally and another site will come up just text. It does the same thing whether I'm connecting wirelessly or via an ethernet cable. It also doesn't matter which browser I use (I've tried Safari, Chrome, and Firefox). Although, once in a while when using chrome, I get a DNS error page instead of the usual 'cannot find server'. I contacted my service provider and I'm not losing speed or dropping packets. According to them, the problem I'm having is very strange since diagnostic tests show no problems at all. Perhaps someone has run into this before and has a suggestion?

Then if you have tried all the browsers try connecting the system to yoour router with an Ethernet cable and turn WiFi off. If you have the same problem then it more then likely after your computer, Router or modem or connection from your ISP.
If you get good browsing with the Ethernet cable then it is either the WiFi card in your Mac or the WiFi system in your router.

MRP Type P1 and late firm schedule lines

Hello All,
     We are using MRP Type P1 which firms our schedule agreement schedule lines within the planning time fence (as desired). However, sometimes the supplier is late on delivery and the firm schedule line goes into the past.
     Is it possible to have MRP move the firm schedule line delivery date to today instead of going into the past?
     Thank you,
     Jerry

Hi ,
Bring process forward (reschedule in)
Within this rescheduling horizon, the net requirements calculation checks whether, after a requirement, a firmed receipt exists, which can be used to cover this requirement. Then the system displays a rescheduling date as well as the exception message Bring process forward for this receipt. The net requirements calculation then uses this receipt and the system will only create another procurement proposal if the receipt quantity is not sufficient to cover the complete requirement. Several firmed receipts can be used to cover one requirement.
It does not take in to account the GR processing time and it is purely based on the stock requirement date , parameters in Procurement and Scheduling in the Material Master
So it will consume the requirement backward scheduling and bring the Process forward.
Kumar which strategy are you using ? scheduling agreement is of weekly , daily or monthly bucket ?
How many days SA bring to Production and How many days SA for forecast you are doing ?
Are you using any Program to convert these SA in to PIR and upload ( using any program ) .
Regards,
Jayavimal
Edited by: jaya vimal on Jun 16, 2010 1:33 PM

Message "to open MLBNexDefAutobahn, you need a Java SE 6 runtime. Would you like to install one now?" I click "not now" and it pops open a second later. It won't go away. Help!

I keep getting a pop up window labled Software Update saying, "To open 'MLBNexDefAutobahn,' you need a Java SE 6 runtime. Would you like to install one now?" I click on "Not Now" and it pops open again a second later. It is not going away! Is this a Java virus? I just installed Maverick Wednesday and got a message yesterday on google that "Google would like to take over this computer"??? Please help.
Thanks!

This is not a virus, or any other kind of malware. Some third-party software that you have installed is repeatedly trying to open a Java process called MLBNexDefAutobahn. What that software might be, I don't know. What software do you have that this name might fit with?

Unable to Update iPhoto after upgrading to Maverick. Error "There was an error in the App Store. Please try again later. (20)". Please help.

Hello,
I just updated my software to Mavericks and I have been trying to update iPhoto on my system without success. Error from App Store is "There was an error in the App Store. Please try again later. (20)".
Can anyone help with this please.
Thank you.

Try this:
Make sure this checkbox is checked in the System/Sharing preference pane:
If it is, uncheck it and then recheck and try ordering again.
OT

Wi-Fi: No Hardware Installed on MacBook Pro 8,2 (15 inch, Late 2011)

Hi Everyone,
For the second time now, I have to bring my Macbook Pro 8,2 (macbookpro8,2, 15 inch, late 2011) running Mountain Lion back to the Genius Bar due to a unrecognized Wi-Fi Airport adapter. The computer was purchased in March of 2012.
The problem started as I was watching 'The Daily Show" online, when suddenly, I lost connection. I clicked on the wi-fi adapter icon on the top menu bar, and saw that no access points were available when there normally were over 20, including mine in the house. I went into the network settings under system preferences and saw that the wi-fi card was off (although it was just on and still showed the full-signal indicator in the menu bar), and attempted to click the button to turn it back on with no response. All other options were either greyed-out or displayed no information. The Hardware tab didn't even display and the mac address suddenly became all zeros.
I rebooted the computer, only to discover the wi-fi indicator on the menu bar displaying no signal. Upon clicking on the icon, the dreaded "Wi-Fi: No Hardware Installed" was displayed. I tried resetting the SMC and PRAM/NVRAM with no success. I also rand the Hardware Troubleshooter ( Option - D upon bootup ) which neither saw the communications device nor reported finding any problem.
I brought it to the Genius Bar, and they ended up replacing BOTH the Logic Board, Wi-Fi adapter, and connection cable between the wi-fi adapter and logic board on July 23, 2012.
Now, it's October 10, 2012, and last night, as I was working through a VPN tunnel on the terminal on one of our remote servers, the SAME THING happened AGAIN! The connection was dropped, same scenario as above, and upon bootup I was greeted with the "Wi-Fi: No Hardware Installed" message again.
The hardware magically disappeard with no mention of this in the Console, as far as I can tell. The Console mentions the loss of connection and inability to contact DNS, but nothing relating to hardware.
For the record, the bluetooth continued to function both times I've had this issue. The first time this happened, I was running Lion and now I'm running Mountain Lion.
So apparently there is something really wrong with either the physical enclosure causing a short somehow, the quality of the Broadcom chip on this wi-fi device, or there's some type of software/power causing the chip to short out.
My compouter is as protected as can be - it's in a Speck plastic housing with a keyboard cover, which was purchased after the first incident, I use it on a hard flat plastic laptop tablet at home, and carry it around in a Timbuk2 Laptop bag. It also has never been dropped.
What's the problem here? Has anyone else had this problem?
Thanks and all the best of luck and success solving your own computer problems
An Admin Becoming More And More Superstitious The Longer He's In This Profession,
TeaKae

Sorry for the late reply. I had a bad experience with the Apple Store and the 'Genius' Bar where I live. However, in the end, I received my MacBook Pro back from repair and everything is working.
Like I said in my previous post, the first time the Wi-Fi broke, I was using Lion. The mother (Logic) board was replaced as well as the Wi-Fi card.
The second time it broke, I was using Mountain Lion. Booting up the Recovery partition and Snow Leopard (new install) did not solve the issue. The Apple Store confirmed that the Wi-Fi card was broken through various testing, which I observed.
Since the attenna wires for the Wi-Fi run through the display, we decided the next logical step was to replace the Wi-Fi card and the display. The reasoning is that there could have been a short or cross connection in the attenna wiring that was causing the Wi-Fi cards to short-out/burn-out. The Bluetooth continued to work in both cases the Wi-Fi failed, meaning that it was unlikely a cable problem.
Since the display and wi-fi have been replaced (20121025), I've had no problems. The wi-fi card is working.
I'm glad the kext file solution has worked for you. I've seen posts on this solution; however, after determining that this was indeed a hardware failure (by using Recovery console, booting from Snow Leopard, and using Hardware Troubleshooter (it didn't even see the Wi-Fi) ), I didn't bother with fiddling with the kext (driver) files. Besides, this hardware is supposed to be designed to work with the OS without any problems whatsoever. Shame on Apple if they don't ship proper drivers for their hardware!
TeaKae

How can I read email from my aol account from my iphone and keep it as uread on my computer at home. It automatically goes to read mail on my computer. On my computer if I want to keep an email to answer later I can mark it "Keep as New".

How can I read my email from my aol account from my iphone and keep it as "unread" on my computer at home? At home I can read an email and if I want to get back to it at a later date I can mark it as "keep as new". I tend to forget it if it goes to "read" mail. Right now, when I read an email from my phone it goes automatically to "read" mail.

On the iPad, using the mail app, there is no way to do what you are asking without tapping the flag icon and marking the item as unread. Have you tried the OWA app for the iPad? It may have that functionality, but I haven't tested it as you need an Office 365 subscription with Exchange support to use the app.

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

You can add it as a file attachment. Exactly how you do this depends on the version of Acrobat you're using, but if you open the Attachments panel, you should see where you can add a file.

Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time

Dear all,
sorry for opening another thread on this.
I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
Is that normal? Is that the performance that everyone else is seeing as well?
I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
(1)
I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
(2)
The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
(3)
The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
(4)
Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
(5)
There is nothing obvious in the logs.
(6)
We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
(7)
I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
(8)
I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
Where do I take it from here?
I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
If it is worth watching more performance counters then I’d need to know what to compare them to.
Is there something else I am missing?
Thanks
Martin

Hi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig | Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold 100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig | Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize 200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/

24 hr. later

Similar Messages

Maybe you are looking for