27" monitor suitable for a 2011 model Mac mini

I have just purchased a new 2011 Mac mini i7 and I am looking to buy a 27" monitor with webcamera and speakers if possible; what brand is compatible with this Mac mini other than apple display ?

Any that have a DVI output should work fine.

Similar Messages

  • HDMI  confusion on latest entry model Mac Mini?

    I have just been looking at the Apple Store's spec sheet for the entry model Mac mini and have this query:-
    It has an HDMI socket but the blurb only mentions that it can be used for multi-channel audio.
    For me, the whole point of HDMI is that it can transport VIDEO to something like an attached HDTV.
    Can it also work with video and if so, why have they omitted to list that in the spec sheet?

    Thanks, but I am probably not buying a Mini.
    I usually go for iMacs but have noticed that Minis are more powerful than I thought .  .  .  .  .  and the base model is only a third the cost of  the new 27" iMac  .  .   . .  . though it does come without the display etc. which I would need, together with the more advanced processor,video card, hard drive, RAM, keyboard, mouse etc. etc. for video editing.
    Nevertheless it is quite tempting  .  .  .  maybe I'll get both in a moment of madness. 
    P.S.  I know I could use my 40" Sony HDTV as a display but unfortunately even the latest TVs are overscanned, resulting in the edges of the computer desktop being cutoff.
    Message was edited by: Ian R. Brown

  • Is it possible to model mac-mini M815 install a second hard drive?

    Hi all!
    Tell me whether, you can install a second hard drive, such as SSD or plain and you need to do?
    My model mac-mini M815 with 500GB hard drive.

    Standard Hard Drive:
    500 GB (5400 RPM)
    Int. HD Interface:
    Serial ATA (6 Gb/s) x2
    Details:
    This model also can be equipped with a 750 GB, 7200 RPM hard drive for an additional US$150. A second hard drive or SSD also can be installed, although it is not formally supported. Also see: How do you upgrade the hard drive(s) in the Aluminum "Unibody" Mac mini models? What type of hard drive(s) do they support?
    From Everymac.com.
    For the Mac Mini MC815LL of 2011.
    If this is not your model have a look here to find it and confirm what can be done.

  • Samsung 20" Pebble monitor - replacement won't work with Mac Mini

    We had no trouble connecting a 20" Samsung SM2032BW monitor to my mum's new Mac Mini and all worked well till the monitor broke (the button fell off...). Samsung cheerfully sent a replacement monitor the next day but the new one - probably reconditioned, but that's fine - gives only the 'check cable signal' message.
    Clearly the Mac Mini has no objections to this model of Samsung, what sort of freaky thing might it be? I am advising my mum by phone and have access to her Mac Mini by logmein.com. There might be some other combinations of changing the screen resolution or startup order of all the equipment (eg disconnect monitor, boot up Mac, and then connect and power up monitor). Or should I try to look at the menu on the Samsung monitor and see what options there are?
    thanks...

    Hi, thanks for offering some help.
    Connection is a DVI cable. I have tried getting my mum to press the menu button but it just gives a message that alternates between analog and digital. She's unable to change the setting to digital.
    I have been looking at the user manual online. The monitor seems to be working fine according to the self-test procedure. My guess is that it will work using a VGA cable and I am posting my mum a VGA cable and a DVI/VGA Apple adaptor. It's a little annoying if we can't get it to work using the same cable as we used for the old and identical monitor, but hey, if it works then I should leave it that way.
    I'll post again if the VGA connection works, but if you have any other suggestions, I'm interested to hear.
    THanks again...

  • Can I use my late 2006 mac mini as an external drive for my late 2012 mac mini?

    I have a (late 2006) Mac mini that I would like to use as an external drive for my (late 2012) Mac mini.  Is this possible and can anyone suggest what cables would be needed.  I am aware that the ports are very different i.e firewire and thunderbolt.  Thanks in advance!

    - You can boo the old Mac in Targe Disk Mode and connect the two via FireWire (FW) You will need a FW 400 to FW 800 cable or a FW 800 or FW 400 cable and appropriate adopters
    How to use and troubleshoot FireWire target disk mode - Apple Support
    - Use the old Mac normally and setup Disk Sharing and access the old Mac via the network. The old Mac's disk will show up  under Devices on the new Mac. One you set up the old Mac yo do not need mouse or keyboard or monitor. You can also setup Screen sharing and actually use the old Mac from the new Mac.
    - Remove the HD from the old Mac and place it in an external USB enclosure of dock and connect it to the new Mac

  • How do I use a Sony DCR-TRV310 for FaceTime in a Mac mini 2009?

    How do I use a Sony DCR-TRV310 for FaceTime in a Mac mini 2009? Sorry, I mean Mini mid2010.
    Message was edited by: tesoro1

    lllaass speaks the truth. Macs have always been "plug & play" with everything except cameras. That's the one area where you MUST have compatible hardware or you're simply S.O.L.

  • Will my 5 year old lg flatron monitor 1730S work with a new mac mini ? thank you.

    Will my 5 year old ( hardly used ) LG flatron monitor 1730S work with a new Mac Mini ? Thank You. Robert.

    You don't say what sort of Inputs it has available, but if VGA, DVI or HDMI then yes, you might need to buy an adapter of some type though ...

  • What is the best hard drive replacement for a first generation mac mini 1.25 mhz 40gb hard drive 1gb ram year 2005

    What is the best hard drive replacement for a first generation mac mini 1.25  40 gb hard drive 1 gb ram year 2005?

    You posted this same question 24 hours ago, which has a reply.  Did you have questions on that answer or did you want further discussion? You could reply to that thread, there's no need to start a new thread.

  • WHAT IS THE OLDEST MODEL MAC MINI SUPPORTED BY OS X LION?

    WHAT IS THE OLDEST MODEL MAC MINI SUPPORTED BY OS X LION?

    My Mac computer is an Intel Core 2 Duo, but get this massege
    (This version of Mac OS X 10.7 cannot be installed on this computer.)
    Hardware Overview:
      Model Name:          Mac mini
      Model Identifier:          Macmini1,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.33 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          MM11.0055.B08
      SMC Version (system):          1.3f4
      Serial Number (system):          G86345WJU38
      Hardware UUID:          00000000-0000-1000-8000-0016CBA364BD

  • I upgraded to firefox 4 but it is not suitable for my version of Mac Os and don't know how to get the previous version of firefox back!

    I downloaded the latest version of Firefox (ie 4) on my Apple laptop, but the fact that it is "unsuitable for (my version of) Mac Os " was not revealed to me until I had already replaced the previous version which was suitable. I don't know how to retrieve the version I was using.

    The latest versions of Firefox require at least Mac OS X 10.5 and an Intel processor. You can revert to Firefox 3.6.xx for Mac 10.4 by downloading the installer from http://www.mozilla.org/en-US/firefox/all-older.html
    More information in the [[Firefox will not start]] article, under
    [https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start#w_firefox-will-not-start-4on-os-x-10-4-or-earlier-or-with-a-powerpc-processorsf5on-windows-98me-or-earliersf Firefox will not start on OS X 10.4 or earlier or with a PowerPC processor]

  • Microphone and RAM for 2005 model Mac MINI??

    My sister has a Mac MINE from Dec 2005:
    Mac mini 1.42 512x1/ 80/
    S/N: YM54701** <Edited by Host>
    Since she is not at all computer-minded (but loves her MINI)- and I want to surprise her with a few upgrades when I visit her next week, what can I order (via the Apple Website?) or purchase to upgrade here MINI?
    1. She wants to use SKYPE and has neither a microphone nor a videocamera for SKYPE. What is a good videocamera (with built-in Mic) that I can get? I have an iSight-- but I use it still so don't want to part with that!
    2. Is it easy to upgrade her RAM to at least 1 gb? If so how and where to buy the RAM etc. She lives near Chattanooga, TN and I'll be at an APPLE STORE in Chicago on 24 June---
    3. And not just for her MINI: What about FireWire adapter cables to be able to:
    A. Take a FireWire 400 peripheral like an iSight and plug it into FW800 on a computer that only has FW800 (like a new MB13)?
    B. Take a FW800 devise (like a Hard Drive) and plug it into a Mac with just a FW400 (like my MacBook from 2006)?
    Thanks for any replies here!
    Steve
    Saturday 20 June 2009

    Hello, Stephen Schulte2
    1. I don't have a mini, but use this separate mic with good results:
      http://store.apple.com/us/product/T6831LL/A
    If you want a cable-free combined mic/webcam, Apple sells this BlueTooth model:
      http://store.apple.com/us/product/TV520VC/A
    For Skype known compatibly, you can search Skype's Store for Mac-compatible webcams:
      http://shop.skype.com/webcams/ - most seem not to have integrated microphones
      http://shop.skype.com/webcams/logitech-quickcam-communicate-deluxe.html has mic
    2. "Easy" is a subjective term. This magazine shows how and says "Not Hard, But Not Easy".
      http://www.macworld.com/article/42237/2005/01/macminiinside.html
    You can even see video of it being done on this site:
      http://www.youtube.com/watch?v=n1UmuWdNSrk
    Whether you want to try it or have a technician do it is your choice.
    If you do it yourself, Crucial RAM has a good reputation with many Mac users:
      http://www.crucial.com/store/listmodel.aspx?pl=Mac%20mini&mfgr=Apple&cat=RAM
    In my Macs, I usually use OWC RAM (and other expansion products.) The products I have bought from them are reliable and low-priced, and OWC offers as much support as you need:
      http://eshop.macsales.com/shop/mac-mini/
    Whatever you decide to do, I strongly suggest that any RAM you buy has a lifetime warranty.
    3. A. You can use this cable that Apple sells:
      http://store.apple.com/us/product/TP320LL/A
    If you like, you can buy it locally or directly from Belkin:
      http://catalog.belkin.com/IWCatProductPage.process?Product_Id=164598
    3. B. That cable is bi-directional, so it does not matter which end is FW 400 or 800.
    However, an adapter that connects 6pin FW400 to 9pin FW800 may be more convenient. You have a choice of many, but here are a couple of examples from which you can choose:
     http://www.sonnettech.com/product/fw_adapter.html or
      http://tinyurl.com/cgll7o
    If you want other options, a wide variety of cables and adapters of many kinds are available from:
      http://www.monoprice.com/
    EZ Jim
    G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11)
    iBookSE 366MHz (10.3.9)  External iSight
     

  • An internet phone application for a Snow Leopard Mac Mini

    The Mac Mini which I purchased , used , because it satisfied the Phone Valet software requirements , plus maintaining usability coordinating as much of the former G5's conformity as one might hope . The folks who provided the Phone Valet device stopped writing for it in the early summer of 2011 .
    The Mac Mini is running well
      Model Name:                Mac mini
      Model Identifier:            Macmini2,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
    The telephone upgrade was up next , and for that we entertained a Gigaset SL78h as a beautiful and portable choice for keeping the computer to telephone compatabiility open via the Phone Valet software & hardware application .
    The USB port on the Gigaset SL78h is advertised as a microsoft written port . This was unfortunately a swing and a miss in the guess work that assumed (guessed) a discoverable compatability of the Snow Leopard system with a usb ported , configured , handset .
    I am presently interested in discovering how to bring the Gigaset SL78h handsets beyond the Mac OSX Preferences recognition in "Network" as a Modem . What can allow Snow Leopard to recognise the device into the informational cognisance , sharing of Address Book , and Phone Valet call monitoring activities enjoyed by the previous system which when hooked up directly with the Phone Valet to computer compiled all the activity nice and neatly .
    I am paying "Vonage" for the access to my number and connections to other numbers via the internet in packets . The phone uses a Verizon FIOS connection through a combined Verizon modem and a Zytel Prestige 861 . With one other "Vonage" provided Motorola device , plus an Airport extremes ports for access which used to be read by the G5 via the Phone Valet hardware . Seems the data is either bypassed or unread by OSX's Snow Leopard , or I have hooked it up in new and unusual ways .
    Having a similar successul setup would be inspirational over here . Moral is steady but could be improved with an application which could talk to both the Gigaset SL78h and the Address and Phone Valet applications , or a recognition of a correct sequence of hardware connections .
    In all cases thank you for bearing with me this long , and if able to provide a hint to the correct direction to take for success , a thousand thanks .
    Frederick R Perez

    For your stated goal, network-attached storage (NAS) or an always-on Mac client would be a simpler solution. Either preferably with RAID, and with provisions and storage for periodic archives.
    A Mac OS X Server box is overkill. The Mac client boxes have 10-client sharing.
    If you want single-signon and shared directory services and mail and web and various of the other pieces and services that are available within, then you can grow into a Mac OS X Server box.
    A server is rather more to manage, regardless of what you choose. You're getting DNS and networking and other core pieces, minimally, and you're also responsible for many of the configuration settings and services and details that a client box receives from a server box. And you're definitely dealing with protections and such across multiple boxes.
    For some other perspectives, there are various previous discussions of this posted around the forums. A search that includes NAS should kick over a few of these; this is a typical low-end alternative to running a server.

  • Monitor Not Going To Sleep on Mac Mini Server With Lion

    Summary: I am attempting to configure a Mac Mini Server that runs OS X Lion. This machine was originally shipped with OS X Lion; it is not an upgrade. My current specific problem is that my Viewsonic VX2835wm monitor will not go to sleep when the minutes setting on the Display Sleep setting for Energy Saver has been reached. Instead, the screen goes blank for a couple of seconds and is replaced with a blank blue backlit monitor. (Ironcially, the display sleep menu cautions: "Never letting your display go to sleep may shorten its life".) I very much want and need the ability to have my monitor go to sleep so as to save energy and to extend the monitor's life for as long as possible.
    Additional Background: I have had a couple of calls with Mac support and they have been unable to tell me whether this is a "design feature" or a flaw in the Lion OS because they have had no similar reports and they do not have the latest hardare available running Lion Server to test to see if this happens with other monitors. (They also, of course, don't have the VX2835wm monitor.)
    I do, however, know the following:
    (1) My HDMI monitor is connected to my Mac mini via a DVI KWM switch (ATEN CS1784) such that the HDMI output from my Mac is converted to DVI (using the DVI to HDMI converter that came with my Mac Mini) and is then run through the KVM and then converted back to HDMI (using a full pin DVI to HDMI cable). However, I have tested the monitor with a straight HDMI to HDMI cable running directly from the Mac Mini to the monitor and it has not changed anything.
    (2) The Lion operating system correctly recognizes (in Hardware / Displays) the model of my ViewSonic monitor.
    (3) I have a MacBook Pro running Leopard (OS X 10.5.8) that is connected to the same monitor through the same KVM switch (by way of a BookEndz docking station) which properly shuts down the monitor when there has been no activity for however many minutes are set in the Display Sleep setting under Energy Saver. (Indeed, all I want is the same functionality on my Mac Mini that I have enjoyed for the last two years with this MacBook Pro.)
    (4) When fully connected to the KVM, if I switch from my Mac Mini to my MacBook Pro and my Mac Mini display goes to sleep while I am working on my MacBook Pro, when I switch back to the Mac Mini, my monitor backlight will be off (and the power light will be standby yellow rather than the blue on) until I wake my computer up by touching the mouse of keyboard. I wonder if this may mean that the Mac Mini's signalling of the change in status from on to standby is somehow dysfunctional.
    (5) Shutting down the server functions (and other open applications) has no effect.
    I would greatly appreciate feedback from anyone out there running a Mac Mini with Lion regarding whether or not their monitors go into standby mode when the Display Sleep time is reached (please note whether or not you are running the Server or Client version, whether or not it is a new install or upgrade, and what monitor you are using).
    Thanks in advance to anyone who can help.

    No, I didn't solve the problem. The monitor still goes to sleep with WIndows but not with my Mac Mini. About 8 months ago I basically wore out the power switch on my monitor so I bought a wireless power switch to shut it off at the outlet. The VX2835wm monitor itself is now starting to fail as well-- a couple of times it's gone through a weird sequence of flashing screen colors on power up and ended up in an overscan mode (that took me for ever to figure out how to fix). I have decided to replace my VX2835wm with a Dell u2412m once it fails for good partly because I really want to keep the 16:10 resolution (very hard to find these days) and partly because I want to see if a different make of monitor will go to sleep properly based upon my Mac Mini power down settings.

  • Can I use an IP camera for FaceTime on my Mac mini?

    I have a Mac mini running Mountain Lion and I would like to know if it is possible to use the streaming video from a wireless IP camera as the video source for FaceTime (and other video apps). If so, how?
    Thanks!

    HI,
    My mistake.  I saw the Mac Mini spec and presumed you were looking for any camera and had come across Wireless IP ones.
    I know of one BlueTooth one (just to keep a spin on it ).
    I have heard good things about this one - but mainly from 2 years or so ago when it was new.
    Actually Wireless IP ones I know next to nothing about.
    One of the main issues with iChat 2 through 4 is that the Video that iChat accepts is limited to DV from the External Firewire cameras that were about  or certain USB Cameras that produce output that works with the Utility from Ecamm or the Apple Framework item that was introduced later in OS X 10.4 for the USB 2.0/UVC compliant cameras.
    By Snow Leopard and iChat 5 most computers do have USB 2.0 ports and all but two of the Mac range have Internal Cameras that are in fact USB 2.0.UVC Compliant.
    On the other side as it were, are Camcorders also move to USB 2.0 over Firewire.
    However in many cases the output is not DV and none are UVC compliant.
    The video signals from these cannot be "translated by either the iUSBCam Ecamm utility or the internal Driver from Apple.
    So the main issue will be the format of the Video output from the camera for iChat or Messages.
    Other apps, particularly Quicktime, are going to have less of a problem as Quicktime can handle many more formats.
    7:54 PM      Saturday; November 24, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • 2011 i5 Mac mini no startup screen, but computer starts fine...

    I just got a new Mac mini MC815 i5 2.3 Ghz a few monrhs ago, and I added 8 GB of RAM and a 750GB 7200 HD then did a fresh install of Lion 10.7.4 a few weeks ago. When I use the Mac mini on any normal 24" Acer PC LCD via HDMI to DVI adaptor or Thunderbolt/Display port to VGA adaptor the Mac mini boots normal. I see the Apple logo and and spinning wheel for about 35-40 seconds and then see the desktop like normal.
    As long as I use the mini on a PC LCD panel, there is no problem. When I try to connect the mini to a 32" or 42" television via direct HDMI cable... the colors are all screwed up. I see the apple boot logo, but it is green instead of grey. I tried 2 different TVs and 2 different HDMI cables. Both TVs are 1080p capable and work fine with Windows 7 PCs over HDMI or VGA at 1920x1080@60 or lower. The TVs have 2 HDMI inputs and 2 VGA inputs, so I have to use the VGA adapter. (can't use DVI)
    I used the Thunderbolt/Display port to VGA adaptor and the colors are fine. All resolutions work, but I nomrally use 1280x720@60 so I can see the icons better from across the living room. Anyhow everything works perfectly with VGA, except there is no startup screen or logo and it takes a long time to boot after the chime. The TVs are blank and say "No Signal". I timed it with my watch on several occasions and it takes between 90 seconds to 2.5 minutes to boot to the desktop, but the TV says no signal while it is waiting. After the desktop finally comes up, all is well.
    I tried 1920x1080, 1280x720, 1366x768... still the same problem. Slow boot, no bootup screen or logo but after boot is finished, everything shows on the TV and fits in the frame (no underscan problems) and the color is normal. The computer is fast and responsive. If connect the mini to a normal 24 inch Acer LCD to VGA I see the logo and it boots in 35-40 seconds.
    Any ideas here? Do you think the mini is displaying the startup screen at an unsupported resolution and that is why the TV is blank? After the boot sequence, it finds the proper refresh rate or size then finally shows up? Or do I have 2 bad TVs? Or 2 bad Thunderbolt/Display port to VGA adaptors?
    When I hook my 2011 2.3 GHz Macbook Pro (same 8GB RAM and 750GB HD upgrade on it too) to the Thunderbold/Display port to VGA, I don't have this problem at all. When I turn on the Macbook Pro, the Macbook screen shows the grey logo and the TV shows a grey screen until it is fully booted. However, the Macbook Pro also cannot use the Thunderbolt/display port to HDMI adapters either, the colors are usually green.
    Anyone else have this problem with their 2011 Mac minis? I want to solve this problem before I buy a second mini for the bedroom TV. When I use my Windows 7 PCs via HDMI or VGA, I have never experienced these problems.

    pullman wrote:
    First -254 which happens right away. From googling a bit I've discovered this may have to do with having chosen the drive as opposed to the volume as source/target.
    So selecting these (but being confused as to how the recovery partition could be included in the restore if I choose only the boot volume and not the boot drive) the restore began. However it stopped after a few minutes complaining about an "input/output error". No further information given.
    Sorry, my instructions may have been too vague. Yes, when you boot into the Recovery HD on your internal HD and use the Disk Utility Restore you need to specify the Source and Destination as a volume (e.g. Macintosh HD). Don't select the drive. And make sure the SSD is formated correctly.
    With Disk Utility's Restore it does a block level copy so it's like creating an "image" in the PC world (e.g. Norton Ghost or Acronis True Image). This means you get ALL visible and hidden partitions copied over and bootable. With CCC you get a bootable clone of your OS/Apps/Data, but you can't boot to a Recovery HD on that clone. There is none. So, when you clone back to an internal drive, CCC has the Disk Center feature to create a Recovery HD on your internal drive. Disk Utility's Restore, however, clones both OS/Apps/Data and the Recovery HD to your internal drive without having to execute a 2nd step.
    Which Intel 520 Series SSD did you install? I have an Intel 520 Series 120GB SSD installed in my Mac Mini in the bottom slot (closest to the bottom opening) and my stock 500GB HDD in the upper slot (in the drive bracket).

Maybe you are looking for