3.3 Bug: Win32 API Error 2 - Please help

Wondering if anyone may be able to help with the following error message:
"An internal error has occured: Win32 API error 2 ("The system cannot find the file specified") When calling ShellExecuteExW from AgWorkspace.shellExecute".
The wonderfully unhelpful persons at the helpline said they could not help me but indicated If I reload the version 3.3 in a different location the problem would go away since some plug-in from v1.4 had infected the new install.
I have no custom add-ins/plug-ins, everything is default.
I followed these instructions, however still have the same error. I removed then re-installed 3.3 on another drive away from C:\Progfiles......
Any suggestions?

Sorry F. McLion, I could have provided the following additional information:
v1.4 lightroom owned, operating without issue, installed in default location
C:\... drive
v3.3 trial downloaded, installed default location, export operating without
issue
v1.4 launched to compare, export working fine
v3.3 launched, export results in error message; determined that export actually
worked, just resulted in the error message
un-installed v3.3 per phone support (manager)
re-installed v3.3 on F:\ drive from copy downloaded on F:\... drive. No change.
Odly after I removed then re-installed v3.3, the pictures I was working
on appeared in the re-installed instance with the most current changes - I would
suspect a clean un-install would have removed any semblence of work done prior
to removing (at least pointers to modified files). Since not, this means the
un-install did not truely un-install, it simply removed some files but also left
some remnents.
Microsoft XP Home edition V 2002 Service Pack 3
Dell Dimension 8400 P4 3.00 Ghz 3.00GB ram
Hope this helps.
John

Similar Messages

Java mail api error- Please Help

Hi, i have set up an smtp server on my local machine. i have given the smtp host address as 127.0.0.1
I am getting the following error though. please help me out with the problem
C:\trainee>java Emailer
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at Emailer.sendEmail(Emailer.java:151)
at Emailer.main(Emailer.java:194)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
... 6 more
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
... 6 more

It's a configuration error in your smtp server.
See the JavaMail FAQ for more information.

I am geting following error please help

ERROR-
RPC Fault faultString="HTTP request error" faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL: http://www.nature.com/principles/webservice/login" errorID=2032]. URL: http://www.nature.com/principles/webservice/login"]
code-
operation = new Operation(null, "login");
operation.url = "login";
argsArray = new Array("login_id", "login_password", "unique_machine_id");
operation.argumentNames = argsArray;
operation.method = "POST";
operation.serializationFilter = filter;
operations.push(operation);
public function login(loginId:String, loginPassword:String, uniqueMachineId:String):AsyncToken
       trace(loginId, loginPassword, uniqueMachineId);
       var _internal_operation:AbstractOperation = _service.getOperation("login");
       var _internal_token:AsyncToken = _internal_operation.send(loginId, loginPassword, uniqueMachineId);
       return _internal_token;
login service is being called from server that is in java-
package com.nature.ebook.components.auth
import com.nature.ebook.data.UserInfo;
import com.nature.ebook.services.CallStatus;
import com.nature.ebook.services.IEBookService;
import com.nature.ebook.services.XMLServiceParser;
import flash.events.EventDispatcher;
import flash.events.IEventDispatcher;
import mx.controls.Alert;
import mx.rpc.AsyncToken;
import mx.rpc.Fault;
[ManagedEvents("authSuccess, authFail")]
public class AuthCommand extends EventDispatcher
public function AuthCommand(target:IEventDispatcher=null)
[Inject]
public var service:IEBookService;
[Inject]
public var auth:AuthModel;
// Methods
* This command dispatches event AuthenticationEvent.AUTH_FAIL when the service return failt
* @param fault Fault
public function error(fault:Fault):void
trace(fault);
var e:AuthenticationEvent = new AuthenticationEvent(AuthenticationEvent.AUTH_FAIL, null, null, CallStatus.getServerFaultCall());
dispatchEvent(e);
* This command dispatches event when the service return rezult Array
* @param result Array
* if cs.success <code>true </code> dispatch AuthenticationEvent.AUTH_SUCCESS
* if cs.success <code>false</code> dispatch AuthenticationEvent.AUTH_FAIL
public function result(result:*):void
if (result)
var cs:CallStatus = XMLServiceParser.getCallStatus(result);
if (cs.success)
var us:UserInfo = XMLServiceParser.getUserInfo(result);
var e:AuthenticationEvent = new AuthenticationEvent(AuthenticationEvent.AUTH_SUCCESS, us, null, cs);
dispatchEvent(e);
else
e = new AuthenticationEvent(AuthenticationEvent.AUTH_FAIL, null, null, cs);
dispatchEvent(e);
public function execute(event:AuthenticationEvent):AsyncToken
return service.login(event.user.loginId, event.magicWord, event.user.uniqueMachineId);

Sorry for the confusion. After starting the WLS 6.0 server, use your browser
to launch the console, verify that the Frobable EJB is correctly deployed as
frobtarget with the correct class path specified. The 6.0 JAAS sample is
trying to invoke on examples.security.acl.Frobable, make sure this is the
deployed instance. This is an error in the JAAS example SampleAction.java
file since the JAAS sample actually builds examples.security.jaas.Frobable,
this bug will be corrected in service pack 1 which will be available
shortly.
nancy coelho <[email protected]> wrote in message
news:3a9ee0af$[email protected]..
Hi! I am new to JAAS and also to Weblogic server6.0. I am trying to run
JAAS sample and geting the following error . please help
Thanks,
Nancy
E:\bea\wlserver6.0\samples>java examples.security.jaas.SampleClient
t3://localho
st:7001
Using Configuration File: Sample.policy
Login Module Name: examples.security.jaas.SampleLoginModule
Login Module Flag: required
username: ncoelho
password: prabhala
javax.naming.NameNotFoundException: Unable to resolve frobtarget.Resolved:
'' U
nresolved:'frobtarget' ; remaining name ''
at
weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOut
boundRequest.java:90)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNod
e_WLStub.java:121)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at examples.security.jaas.SampleAction.run(SampleAction.java:61)
at javax.security.auth.Subject.doAs(Subject.java:80)
at examples.security.jaas.SampleClient.main(SampleClient.java:114)
Failed to frob
E:\bea\wlserver6.0\samples>

Windows - No Disk Error - Please help!

Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!

I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario

I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

Although your message isn't mentioned in the symptoms, let's try the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

Win32 API error 126

What to do if message: [Win32 API error 126 ("Dasangegebene Modul wurde nicht gefunden") when calling ::LoadLibrary from getFunction] apears

What to do if message: [Win32 API error 126 ("Dasangegebene Modul wurde nicht gefunden") when calling ::LoadLibrary from getFunction] apears

HT201442 I did this but still i am getting the same error , please help me .

I did this but still i am getting the same error , please help me .
<Email Edited by Host>

Look at http://support.apple.com/kb/ts4451
 Cheers, Tom

I am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

i am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

Hey alkarim2008,
If you are having an issue with being unable to update or restore your iPhone, I would suggest that you troubleshoot using the steps in this article -
Resolve iOS update and restore errors in iTunes - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

My iphone won't pass the connect to itunes. when i try to restore is says that there is an error. please help!

hi my iphone is broken. it won't pass the connect to itunes. when i try to restore is says that there is an error. please help!
thanks,
jg2013
<Subject Edited by Host>

Hello, 02633.
Thank you for visiting Apple Support Communities.
If your iPhone is disabled, you will need to process the steps in the article below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
Jason H.

HT4623 I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.

I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
Kindly Activate my phone.

Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708

I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers.

When I export from LR5.3 I get an error message Win32 API error . However the export seems to work.

The message is Win32 API error 2 ("The system cannot find the file specified") when calling ShellExecuteExW from AgWorkplace.shellExecute. However the export works. What is happening and how do I get rid of the error message?

Near the bottom of the Export Daialog, in the "Post-Processing" section make sure that the "After Export" box is not empty (which is invalid and causes the export operation to trip up). Use the drop-down to select a valid choice such as "Do Nothing".

HT201210 hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me :)

hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me

Please tell us what kind of computer you have, what operating system and what version of iTunes. Not just "the latest version of iTunes", the exact version number.

3.3 Bug: Win32 API Error 2 - Please help

Similar Messages

Maybe you are looking for