3.5 now moving an adjusted image to front of event folder. Have forgotten how to not have that happen. Any ideas? Thanks.
3.5 moves adjusted image to front of event folder; how to stop that? Thanks.
When exactly does this happen? Are you seeing adjusted images move in the filmstrip after editing? Where are you editing from - are you browsing a project, an album, a smart album, a folder? Sorry -"Event folder" is not clear.
If you are referring to the film strip in the browser, how have you set the "Sorting" pop-up menu?
Similar Messages
-
by juggling the phone whilst washing up, I accidently dropped it in the sink, I had just became unemployed so no more insurance by a day..
I have follwed advice dried out phone in rice and in airing cupboard for nearly two weeks
Screen looks OK minor discolour on top of screen but no IOS
Tried connecting to Itunes it starts to restores then stops.
any ideas in trying to get it to work or is that it, new phone required which I can not really afford at present.
Controller 62It's time for a new (replacement) iPhone. Take it to an Apple Store or Authorized Apple Service Provider. You may well receive some credit for your old one.
-
Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas re fixing this? Problem remains even when I open an earlier version on the previous version of Pages
It has always been that the upgrade tries to be the "master" over the older version.
Anyway in Pages 09 you have probably the Comments field showing, making all contetn to move to the right.
Go to View menu > Hide Comments. -
I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?
This could be from having restrictions enabled. Icons completely disappear when "restricted"
-
Hi guys have a problem with my ipod touch 4 gen i deleted my music and am now unable to put music on to my ipod. when i attache the ipod to itunes it says the music is still on my ipod any ideas thanks in advance.
Do a reset of everything on your ipod. Then reconnect it and it should work.
-
Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here. -
New Imac. I get rid off login password from security and accounts and restart. Now it asks for username and password and it's not acepting anything. Any ideas?
First, reset your password as follows.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.
If you're being prompted to authenticate when making changes to files inside your home folder, continue as follows.
Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select ▹ Restart from the menu bar. -
Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please
Raws, even if not compressed, Sould be smaller than a 24-bit Tiff, since they have only one bitplane. My T3i shoots 14 bit 18MP raws and has a raw file size of 24.5 MB*. An uncompressed Tiff should have a size of 18 MP x 3 bytes per pixel or 54 MB.
*There must be some lossless compression going on since 18 MP times 1.75 bytes per pixel is 31.5MB for uncompressed raw. -
My itunes is not showing my ipad as a device anymore, i uninstalled itunes and reloaded, the ipad showed up for awhile, as updates were happening, it then said the ipad was restarting and now it is not showing up again, any ideas?? I was trying to sync my calendar and contacts which worked perfectly last time. Now when I plug in the ipad it brings up adobe photoshop album start - photo downloader and looks like it is trying download photos as if it is only seeing the ipad as a camera. very frustrating!
Windows ONLY sees iPads and iPhones as a camera. This is nothing new or different.
When you open iTunes and connect the device, does iTunes detect the device?
Have you tried a different USB port? Restarting the computer? Restarting the device?
Frankly, uninstalling and reinstalling iTunes is a bit of a drastic step as it was likely unnecessary. -
The Air Port fan icon on the menu bar is greyed out and when I click it to connect a message appears ' the wi fi network could not be joined '. The wi fi is turned on both on the router and selected as on in the screen drop down. The smart phone works perfectly with the wi fi router so it must be something to do with the Mac book. It worked fine before I took it to Italy. It does work Ok using an Ethernet cable. Could it be that some Italian IP's are being stored in the laptop and the UK IP is not being recognised? Any ideas on what could be done? Any advice would be appreciated. Thanks !
Hi Here is part of the report which I've now pasted in . .
# --- Check Connectivity
05/30/14 16:16:38.8480 WiFi: WiFi interface is associated . . . fail
# --- Wi-Fi Interface
Interface Name : en1
MAC Address : 5c:96:9d:7c:a6:39
Network Name : (null)
Active PHY Mode : None
Security : (null)
SSID : (null)
BSSID : (null)
Country : GB
RSSI : 0 dBm
Noise : 0 dBm
Rate : 0 Mbps
Channel : 1
Channel Width : 20MHz
# --- Bluetooth
Power State : On
Paired Devices : 0
# --- Wireless Environment
2.4 GHz Networks : 2
5 GHz Networks : 0
Current Channel Networks : 1
Recommended 2.4GHz Channels : [ 6 2 3 4 5 7 8 9 10 12 13 ] 1
Recommended 5GHz Channels : [ 36 40 44 48 ]
# --- Network Configuration
Primary IPv4 Interface : None
IPv4 Address : None
IPv4 Router : None
Primary IPv6 Interface : None
IPv6 Address : None
IPv6 Router : None
# --- Debug Log Entries
05/30/14 16:16:38.9330 SMTP port is blocked
# --- Environment Test Cases
# --- Environment Summary
# --- Configuration Test Cases
05/30/14 16:16:38.9500 Wi-Fi interface is off, will not run configuration tests
# --- Configuration Summary
# --- Additional Information
05/30/14 16:16:45.1300
# --- Router Information
05/30/14 16:16:46.0980
# --- Create Diagnostics Report
Failed to collect system profiler report -
I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers / Headphones
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it. -
I just moved and my iPad location is still showing my old location how do I change that?
I just moved and my iPad location is still showing my old location how do I change that?
That's the problem. A WiFi-only iPad uses a database of router locations to determine location. Unfortunately, the mechanics behind this database are a tightly-held secret. Your location may change to the correct one within a week or two or it may take as long as a year! (I'm not kidding.) Incidentally, it will help if you're within range of other routers. Doesn't matter if you pass data through them and also doesn't matter if they're locked. The only requirement is "within range."
By the way, you will find that, if you take your iPad away from your house, it will report your location more accurately. -
I had downloaded a number of songs on my old iphone 4, but it died before i had a chance to sync with my comp. now i have a new iphone and cant down load any of the songs i once had and have paid for. any ideas??
If you live in the US launch the iTunes store, then tap Purchases, then the "not on this phone" tab. If you don't live in the US you will have to buy them again, unless the iTunes Store support staff takes pity on you when you email them with a request for help.
BTW, how many songs can you download between daily syncs? -
Just upgraded to OS X Lion. Now Safari behaves erratically. Some sites load at lightning speeds I have never seen before, others load painfully slow or not at all. Any ideas here?
I would recommend running Disk Utility (Applications - Utilities - Disk Utility) and Repairing Disk Permissions. Please run this at least 2x. It that doesn't help then post back, there are many other things to try.
-
I recently updated to IOS 5.1.1 and now my iPod touch won't sync music from my pc. It will sync apps though. Any ideas what I should do please?
- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- NextI would restore from backup.
Maybe you are looking for
-
How to place TOC into a different frame in an HTML document?
I'm now using MS Word 2010 to update a document that I originally created in MS Word 2003. I want to create a TOC in a separate frame positioned to the left of the frame that contains the text of the document. Using help from Technet I've been able
-
Applet URLConnection.getInputStream() blocks
There seems to be a bug in Java (#4333920, #4976917) that causes the getInputStream() method to block and never return. I've tried many things to solve this. I'm using Java 1.4 to connect to servlet running on Tomcat. Does anyone know a solution to t
-
Function Module to get the TIMESTAMP
Hi, Is there any function module to get the TIMESTAMP as Outout , if i give input Time and Date. Or, If I go for the concatenate statement.. Do I need to concate the commas in to the target field? Because, I am not getting the proper result with this
-
Hello Experts I got some confusion of parallel reporting in new GL by using ledger concept. 1. How FI posting done to both ledgers? For example, a AR posting in local company, are there two accounting docs generated, one for leading ledger, and one f
-
How to confi Hundi in the Banking - SAP FI
Dear All Like to request you kindly guide, how to configure the HUNDI concept in the Banking in SAP FI. Please provide the step details. Kindly do the needful. regards amarnath