3 company codes,8 Plants,50 Slocs,19 Sales depots.

Dear All,
Please help us to design the orgn structure of our client.
1.     Our client is having 3 company codes. One has 6 plants and the second one and third company code has one plant each. Total 8 Plants. Storage locations 50.
2.     19 Depots carrying sales activities and maintaining the safety (or) Minimum level stock which is 5 days stock of the each product. Need to track stocks at Depot level.
3.     Each plant has separate finished goods storage location and will distribute the finished goods to all 19 sales depots.
Pain Area:
Whether all the 19 depots treat as storage  locations and assign all the 19 storage locations to all the 8 plants.
They are having reorder point as 5 days (Replenishment) at depot level and every month first day they are considering the total stock and they are running MRP for production. 
How to take care of the reorder levels?
Is it feasible?
The good number of points will be given for the best suggestion.
Thanks & Regards,
Sudhakar
00331758737035

Hi Sudhakar,
Whether all the 19 depots treat as storage locations and assign all the 19 storage locations to all the 8 plants
I did not get this question. I presume the 19 depots are best modeled as locations. What could it mean by being "assinging stoarge location". The 8 manufacturing plants have their storage locations or sub locations as they are known in APO and the 19 depots should have their own storage locations.
Now if all 19 depots and 8 plants are a single MRP area, I wonder how are supply relation ships modeled.
For running MRP I would assume each mfg plant or all 8 of them (if they are physically close by) be one MRP area and let the depots be plants. MRP can then propose where to replenish from considering all that you stated.. stocks, re-order point and such.
Hope your question was as simple as this.
Regards,
Lok

Similar Messages

  • 3 Company Codes, 8 Plants,50 Slocs,19 Depots

    Dear All,
    Please help us to design the orgn structure of our client.
    1.     Our client is having 3 company codes. One has 6 plants and the second one and third company code has one plant each. Total 8 Plants. Storage locations 50.
    2.     19 Depots carrying sales activities and maintaining the safety (or) Minimum level stock which is 5 days stock of the each product. Need to track stocks at Depot level.
    3.     Each plant has separate finished goods storage location and will distribute the finished goods to all 19 sales depots.
    Pain Area:
    Whether all the 19 depots treat as storage  locations and assign all the 19 storage locations to all the 8 plants.
    They are having reorder point as 5 days (Replenishment) at depot level and every month first day they are considering the total stock and they are running MRP for production. 
    How to take care of the reorder levels?
    Is it feasible?
    The good number of points will be given for the best suggestion.
    Thanks & Regards,
    Sudhakar
    00331758737035

    Hi
    Here is the scenario of having 3 company codes assigned to 8 plants and have 19 depots + one distribution center (similar to depot with slight changes
    its clear  plant assign to 3 company code,what about depots and distribution channale it work independent or assign to company code?
    If depots are located in differnt city,then It should be plant not storage location and assign to 3 company code
    then if it is the case what about Distribution center(functions as like depot with slight changes of sampling being done & no safety stock)?
    Is it feasible & how to map this in SAP?
    for this take help of sd guys
    It may be plant or sale organization if not sale organization ,then create it plant ,but no manufacturing activity and not under MRP
    Distribution center acts as co-coordinator for getting the goods from FG stores and sending to individual depots as per the requisition
    This can be achive with  Stock transfer between plant
    Regards
    Kailas ugale

  • PO creation-ME21n-Why SAP does not check company code and Plant relation

    Hi All,
    Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
    <b>Example:</b> Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
    How can we put this check in place?
    Thanks in advance.
    Deepak

    Hello Deepak,
    There are three types of purchasing
    - Company code specific :You need to assign company code to Pur organization
    - Plant specific : You must assign plant to pur organization
    - Cross company purchasing: No assignment between company code and pur organization.
    In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
    The following is the copy of sap help text:
    You can assign a purchasing organization to one company code. This is company-specific purchasing.
    You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
    Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
    A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
    Now, check your company-code and purchase organization assignment.
    Hope this helps.
    Regards
    Arif Mansuri

  • Where can I find the relation between company code and plant?

    where can I find the relation between company code and plant?
    I need to the list of plants under a company code.
    Which table?

    yes,wayne weng   .What you said is right.
    Thank you very much!
    My MSN:[email protected]

  • Function Module to get Company code and Plant on the basis of infotype and pernr

    Hi Experts,
    I need to know the function module which will return company code and plant based on infotype and pernr(employee Number).
    Thanks,
    Salil Bagchi

    I think thats the only way
    CALL FUNCTION 'CU_READ_RGDIR'
        EXPORTING
          persnr          = p0001-pernr
        TABLES
          in_rgdir        = it_rgdir
        EXCEPTIONS
          no_record_found = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    check whether "Pay date for payroll result" with in Start Date and
                  End date, and "Reason for Off-Cycle Payroll" is initial
      LOOP AT it_rgdir WHERE paydt >= v_begda
                             AND paydt <= v_endda AND
                             void IS INITIAL
                             AND ocrsn IS INITIAL
                             AND srtza = 'A'.
        v_seqnr = it_rgdir-seqnr.
    ENDLOOP.
    Hope this helps.
    Thanks
    Kiran

  • Which table contains both company code and Plant

    HI,
    Which table contains both company code and Plant?
    which table contains Purchase requisition number and Company code?
    Please help me.

    plant and company code <b>marc</b>
    MANDT     MANDT     CLNT     3     0     Client
    MATNR     MATNR     CHAR     18     0     Material Number
    WERKS     WERKS_D     CHAR     4     0     Plant
    Purchase requisition number and Company code in <b>ekpo</b>
    MANDT     MANDT     CLNT     3     0     Client
    BANFN     BANFN     CHAR     10     0     Purchase requisition number
    reward fi usefull

  • Relationship between company code n plant

    <i>Hi,
    which table stores company code n plant info.
    I wanna select all the plants belongs to a company code.
    Thanks.
    Senthil</i>

    Hi,
    I think T001W_EXT can help you.
    types : begin of ty,
            werks type t001w_ext,
            bukrs type t001w_ext,
            end of ty.
    data : itab type standard table of ty,
           wa type ty.
    select werks bukrs into table itab from t001w_ext where bukrs = s_bukrs.
    sort itab.
    delete adjacent duplicates comparing all fields.
    loop at itab into wa.
    write wa.
    endloop.
    Kindly reward points by clicking the star on the left of reply,if it helps.

  • Assignment of Purchase Organization with Company Code and Plant

    Please give me solution to Assign Purchase Organization with Company Code and Plant. While creating a material in organization level plant and purchase organization should be assigned.
    Please help me out.
    Thanks

    Hi,
    I am not sure if i have really understood your query.
    Material creation means creating master data, as far as creation and assignment of organization elements with other organizational elements are concern for eg : purchase org in you case is part of standard configuration.
    You create Purchase org using t-code OX08 here you copy from and existing one and then chane the description of Pur org as per your requirement.
    You assign Purchase Org using t-code OX01 to company code assignment, t- codeOX17 for plant assignment to Purchase Org.
    Normally you do all your changes in Devlopment server save the changes in an transport request then move it to quality and production enviornment.
    Hope this helps.
    BR

  • Creating order with out Company code and plant - just for pricing -possible

    Hi gurus
    Just for creating sales order (let us say no delivery and no billing, client was not intrested in the initial setup) for just pricing thing, does we really need Company code and plant. with out that just with sales org setup(sale org+D.C) can I create an order to full fil the pricing scenario.
    Please I need help on this
    Thanks
    Kris

    hi kris,
            we cannot create a order with out company code and plant , due to the following reasons
          we do not require the company code to create the order , but we require the plant to create a material and use it in the sales order .and we require a company code to create a customer .
    the pricing procedure is determined depending upon the sales area(sales org+distribution channel +division).
    please reward the points if it is helpful
    Regards,
    Murali

  • Company Code Validation of Financial Document with Sales order during Sales

    Dears,
    We are working on ECC 6.0 version and our requirement is to restrict saving the Sales order if the Company codes in Sales order and Financial document (L/C) when assigning Financial Document in Sales order are different.
    With the configuration settings in Foreign Trade, it is possible to restrict this but the system only gives information message if the company codes are different but save the sales order.
    Is it possible to restrict the sales order from saving if the Comapany codes are different through SAP standard configuration or do we need to go for any development only.
    Looking forward to your suggestions.
    Elliah.

    hi Elliah,
    for this task, there are good Userexits. I don't know any customizing for this.
    I would do it in the roule of the copying or in the Userexit while saving the invoice. But this is in your point of view ABAP developement.
    Hans

  • How to find out Company code from Plant in BW

    Hi,                                                      This is probably a very basic question.                                 
    In one of my ODSs, I have 0PLANT infoobject but do not have the Company Code. I thought 0COMP_CODE should have been an attribute of 0PLANT. But it is not and I am NOT finding anyway to derive the company code from the Plant code.                              
    I guess I can change my datasource to get that value but thought the Plant-->Company Code link is one of the most basic things in SAP R/3.    
    I cannot imagine it can be missed in the Business Content design by SAP.  
    So thought I would check with you to see if my expectation is correct.    
    If not, what might have been the reason behind the exclusion of the link between Plant and Company Code from the Business Content.                                                                               
    Thanks and regards,                                                       
    Atul Kulkarni

    Hi,
    we are running RETAIL and by design:
    a plant (0PLANT ) belongs to a sales organization (0SALESORG attr of 0PLANT) which belongs to a company code (0COMP_CODE attr of 0SALESORG)
    this defines a unique comp_code for a plant.
    You can therefore put the following two fields in an internal table of a start routine
    SELECT pPLANT sCOMP_CODE
    INTO CORRESPONDING FIELDS OF TABLE lt_internal
    FROM /BI0/PPLANT p
    INNER JOIN  /BI0/PSALESORG s ON sSALESORG = pSALESORG
      AND sOBJVERS= pOBJVERS
      AND s~OBJVERS = 'A'.
    and look it up in your IObj routine.
    In R/3 that's true WERKS (T001W9 belongs to a BWKEY (T001K) which belongs to a BUKRS.
    hope that helps...

  • Company code and plant should get defaulted from PO Document Type

    Dear All,
               We have three company codes 1000 ,1010 ,1020 .We have three purchase document types.NB,NB1,NB2.My requirement is if the user selects document type NB system should automatically take company 1000 and plant 1000 .Same is the requirement for other 2 documents . Is there any settings from which we can achieve company code ,plant getting defaulted according to document type ?
    Thanks & Regards
    Abhijit Das

    Dear,
    Ask your Abaper to write code in GUIXT scripts....
    There if you select particular document type then by default in PO it will popup your plant and company code.
    The above mentioned functionality we do not have in our current projetc, but related tho this we have done it by using the same scripts.
    Try def it will work.
    Regards
    Utsav

  • PO Conversion from once company code to another company code

    Hello All,
    Can any one help me the process or steps to convert Open PO's from one company code to another company code?
    If anyone have done something like this in the past then please share your experience or the process steps you have followed.
    Thank you very much for your help and support
    Ex:
    company code: ABC
    Plant: 123
    Sloc: AS12
    PO # : ABC1
               ABC2
    convert above PO to,
    Company code: XYZ
    Plant: 999
    Sloc: AS12
    Edited by: Thil Nayak on Aug 31, 2011 5:35 PM

    The important part is not really in LSMW, it is before in analyzing which POs you want migrate automatically and which manually.
    you might have POs that are partially done, e.g. have partial receipts, so you only need to migrate the remaining quantity only.
    And here I usually decide based on the volume of such POs whether I do them as well with LSMW (which adds more complexity to either source file or LSMW) or if they will be done manually.
    you have to erase the PR numbers, otherwise SAP will validate whether these numbers exists for your new plant.
    you have to think about how you prepare the source file, whether you do a download from various table and put it together in Excel, or if you do it totally different way. I usually setup a ALE scenario and send the old data via ALE IDOC process into a file on the applicaton server, then I use this file with thousands of IDOCs as my source, so I dont need to extract data from a table myself.

  • CJ20N project builder restriction on plant or company code

    HI there
    I hope this is in the right formum..
    I just cannot seem to get the transaction CJ20n to check on orglevel Plant (WERKS) or Company code (BUKRS).
    When displaying or changing a project people should not be able to  access projects from differents companies (or plants). When I look at the basic data, organisation fields of the project, there are CO area and Business area, as well as Company code and plant. On one of the last (company code or plant) I want to have an authorisation check wether the user is allowed to display or maintain the project
    when I trace the actions, I only find checks on
    C_PROJ_KOK (controlling areaa)
    C_PROJ_PRC (profit center)
    C_PROJ_VNR (project manager)
    but they are not company specific here
    I activated object C_PPBD Authorization for maintaining planned independent requirements SAP note 635612), but this is not being checked on transacton start or when changing project meta data e.g. description.
    Has somebody any ideas/tips on howto get CJ20n to check on WERKS (plant) or BUKRS (company code)? I would be very thankfull
    Jos

    Jos,
    It looks like your question got hijacked, so a shot at your original question regarding CJ20N:
    If you want the check upfront and not inside the transaction, then you could add it in transaction SE93. but this will only prevent the user from starting the transaction, not using it.
    If the check on F_BKPF_BUK or whatever is not coded anywhere in CJ20N, then adding or removing SU24 indicators will not help. You could try to look for a user exit ("Enhancement transactions CMOD / SMOD)). I would ask this question in the CJ20N forum.
    You could open a development request with SAP, but there would most likely need to be a few more customers with the same request or a realy good reason to add it before this materializes.
    If all of those fail, you can get yourself an object key for where ever it is that you want an additional check to be coded and change it yourself. After this, CJ20N or the check function will belong to you (not SAP) and anybody with a developer key could also change it using normal developer authorizations.
    Good luck,
    Julius

  • How is workflow assigned to positions and particular company code / plants

    Hi Everyone,
    We have updated a system with a new company code and corresponding new plants for profit center update. Now, they want the workflow handling of INVOIC, DESADV and ORDRSP to still be maintained. There is an existing workflow for error handling on these messages for the  old company code and plants. The workflow items are sent to certain positions maintained in PPOM. Now, I am requested to create new positions that will receive the notifications for errors on incoming invoices, order responses and dispatch advices for the new company code/plants. Creating new positions and assigning agents to them is quite easy but my problem is where to specify the information about the company code and plants. For the existing positions, only the Basic data tab is maintained where only an abrreviation of the position and its definition need to be entered.
    Right now, the workflow items for the new company code and plants are directed to a position that already exists in PPOM before the project. So how can I have the workflow items be directed to a new position that I will create?
    I hope someone can provide an answer to this. Thanks!

    Hello
    Are the workflows custom or standard ones?
    You need to check the workflow definition as to how they are designed to get the Positions and then change accordingly. The email task may be assigned to positions directly, or there is some custom code or a Workflow Rule.....First get to the agent determination (by going to Workflow Definition) and then you may change the "logic" for positions.
    regards,
    Modak

Maybe you are looking for