3750 stack won't sync with NTP server

Any help greatly appreciated with this one - I can't for the life of me figure out what's going wrong here.
I'm working on a 3750 stack in Singapore (UTC +8) and I'm trying to get it to sync its clock with 3.sg.pool.ntp.org.
This is the weird part - "sh ntp associations" shows that it is syncing:
  address         ref clock       st   when   poll reach  delay  offset   disp
*~199.195.193.200 203.117.180.36   2     52     64   377 80.936 -13895.  1.771
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
And "sh ntp associations de" shows that it's happy:
199.195.193.200 configured, our_master, sane, valid, stratum 2
ref ID 203.117.180.36, time D691F63E.C4B691CD (17:26:22.768 UTC Tue Jan 28 2014)
our mode client, peer mode server, our poll intvl 64, peer poll intvl 64
root delay 196.39 msec, root disp 592.71, reach 377, sync dist 944.69
delay 80.93 msec, offset -13895.2686 msec, dispersion 2.65
precision 2**20, version 4
org time D691FA8F.5FF29003 (17:44:47.374 UTC Tue Jan 28 2014)
rec time D691FA9D.5041E9C7 (17:45:01.313 UTC Tue Jan 28 2014)
xmt time D691FA9D.3B3524C8 (17:45:01.231 UTC Tue Jan 28 2014)
filtdelay =    82.20   80.93   82.17   81.49  155.78   81.08   84.67   82.09
filtoffset = -13897. -13895. -13899. -13900. -13901. -13872. -13876. -13876.
filterror =     0.00    0.99    1.98    2.94    3.94    4.92    5.87    6.81
minpoll = 6, maxpoll = 10
But the clock is stubbornly remaining unsynchronised ("sh ntp st"):
Clock is unsynchronized, stratum 16, reference is 199.195.193.20
nominal freq is 119.2092 Hz, actual freq is 119.2092 Hz, precision is 2**17
reference time is 00000000.00000000 (08:00:00.000 UTC Mon Jan 1 1900)
clock offset is -13895.2686 msec, root delay is 0.00 msec
root dispersion is 14.62 msec, peer dispersion is 3.26 msec
loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000000000 s/s
system poll interval is 64, never updated.
NTP-relevant config is as follows (no ACLs, outbound UDP 123 allowed on perimeter firewall):
clock timezone UTC 8 0
ntp server 3.sg.pool.ntp.org
I have configured a pair of stacks in Hong Kong for NTP (though that was a couple of months ago and I recall that those were a pain at the time as well) and those are working fine.

Much to my annoyance, the switch stack is now synchronised.  No  configuration changes were made in the interim; it just looks like it  needed a long time (well over an hour in this case) to start syncing  properly.

Similar Messages

  • Please help troubleshoot why SM-SRE WAAS module can't time sync with NTP server

    I have a remote WAAS site where a SM-SRE-900 module is plugged in a 2945 router. Everything is fine except the module can't sync its time to the NTP server. Its NTP was configured right and it can reach the NTP server with no problem. There's no authentication configured. But somehow it can't associate with the NTP server. I have tried manual NTP sync, but it failed too.
    The same NTP server and config is also used for many other WAAS site and the CM. They are all fine. I'm running WAAS 4.2.3 build 7. The module isn't showing any other alarms.
    Here is some show outputs and the manual NTP sync result. I noticed its poll is only 64 seconds while all other sites are showing 1024 seconds.
    waas1#sh ntp status
    ntp enabled
    ntp authentication disabled
    server list:
    Server           Key
    10.0.0.1         -
         remote           refid      st t when poll reach   delay   offset  jitter
    ==============================================================================
    10.0.0.1        66.96.98.9       3 u   43   64  377   16.828  2359370 2421.24
    waas1#ntp 10.0.0.1
    16 Dec 22:06:20 ntpdate[9835]: bind() fails: Permission denied
    Failed to set software clock using NTP server 10.0.0.1

    What the SRE-900 have as it's time?  Use the show clock command.  Does it match within a few minutes of ntp already, if not, and if this is not the first first clock set out of the box, then ntp sync might fail.
    You might try to manually set the clock correctly (set clock ... something), then see if the ntp server will sync.

  • IPhone won't sync with Exchange Server

    When I set up an account with my exchange server it's able to authenticate but it is unable to sync mail or calendars. When I try it gives me an error which says "Cannot Get Mail. The connection to the server has failed."
    The log says
    Sat Jul 17 09:25:19 Pixel configd[25] <Debug>: CaptiveNetworkSupport:UIAllowedNotifyCallback:70 uiallowed: true
    Sat Jul 17 09:25:21 Pixel MobileMail[170] <Warning>: EAS|EAS Protocol Manager set to ASProtocol12_1
    Sat Jul 17 09:25:21 Pixel MobileMail[170] <Warning>: EAS|EAS Protocol Manager set to ASProtocol12_1
    Sat Jul 17 09:25:24 Pixel configd[25] <Debug>: CaptiveNetworkSupport:UIAllowedNotifyCallback:70 uiallowed: false
    Sat Jul 17 09:25:26 Pixel configd[25] <Debug>: CaptiveNetworkSupport:UIAllowedNotifyCallback:70 uiallowed: true
    Sat Jul 17 09:25:31 Pixel MobileMail[170] <Warning>: ERROR: MFMessageErrorDomain/Generic - The connection to the server failed.
    Sat Jul 17 09:25:32 Pixel dataaccessd[1644] <Warning>: DA|Yikes: got an unhandled top level error 111
    Sat Jul 17 09:25:32 Pixel dataaccessd[1644] <Warning>: EAS|ASFolderSyncTask failed: Error Domain=DAErrorDomain Code=111 "The operation couldn’t be completed. (DAErrorDomain error 111.)"
    I don't believe this is a generic problem with the server because other users with iOS 4.0.1 and iPhone 4's are able to use the server. When one of those users who successfully uses it with his account configured his iPhone to access my account he received the same error. I am able to use my iPhone to access exchange accounts on other servers. Therefore I suspect there is a problem with just my account on just this server when it is accessed from any iPhone.
    Has anyone seen anything like this before? Is there anyplace I can look up "DAErrorDomain error 111" to get more information on what may be failing?
    Message was edited by: schoaff

    I have the same problem - authenticates but will not sync. My 3gs used to work.

  • After 3.0 Upgrade Calendar won't sync with Exchange server

    I was running 3.0 beta and everything was working fine. I then upgraded to 3.0 GA and my calendar no longer syncs over WiFi with our corporate Exchange server. Both mail and contacts are working fine. I did a number of things to try to resolve the issue, the last was to erase all content and settings. Nothing has worked. Anybody have any ideas.
    Steve

    Update: I got it working... In 2.0, I had my calendar options set up for sync-ing the last 2-weeks. After going to 3.0, my calendar went blank but when I changed the sync parameter to 'All Events', everything started to work again.
    Please let me know if you have the same failure and if this trick worked for you too.

  • When I receive an email request for a meeting, when I open it I get an error message asking if I want to revert to server, try again or ignore. If I choice revert to server it delete the event, if I choice ignore it accepts but won't sync with my other de

    When I receive an email request for a meeting, when I open it I get an error message asking if I want to revert to server, try again or ignore. If I choice revert to server it deletes the event, if I choice ignore it accepts it but won't sync with my other devices.

    Interesting suggestion, but it's not clear to me how I would do that if I'm not using an "(at) icloud.com" email address/account. I am having the same problem with changed invitations that come from an organizer who is using Google Apps. My email account is hosted at my ISP - it's not obvious to me how I can use iCloud to access that email account (and therefore the changed invitation). Suggestions?

  • Iphone 4 version 5.0 (9A334) won't sync with itunes 10.5 (141)....

    iphone 4 version 5.0 (9A334) won't sync with itunes 10.5 (141)....
    this message keeps popping up when I try to sync my iphone
    "could not be synced because the sync server failed to sync the iphone"
    anyone have this kind of problem?
    googled it, and it's so confusing @.@

    There is definitely a problem with iTunes 10.5 and iOS 5.0 syncing correctly.  I've seen lots of workarounds on the forums here.  Just search for it and see if you can come up with something that works.

  • I upgraded my iphone 4 to ios6.1.3 and now it won't sync with my itunes on my PC. What do i do?

    I upgraded my iphone 4 to ios 6.1.3 and now it won't sync with my itunes. When i try to download the new itune software it says the itunes update server could not be contacted. What do i do?

    Hi drgpeck,
    This article is for a similar issue, and the troubleshooting steps would be recommended for your specific issue:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Cheers!
    - Ari

  • Mail won't sync with gmail

    Mail app won't sync with my gmail account. I've tried deleting my gmail account and setting it up again, but am getting an error message that my user name or password is incorrect. My iPhone Mail app isn't syncing with gmail either - same error message. I can get into gmail through Safari. I sure would appreciate any suggestions.
    Thanks.

    adamlea wrote:
    I can log in to gmail through Safari, using the same login/pass I've always used. When I check the error message in Mail, the error is: "The server returned the error: Account exceeded bandwidth limits. (Failure)." Never had a bandwith issue before, ever.
    that's a different issue. you said before that it didn't like the password. what it actually doesn't like is the number of simultaneous connections. quit Mail on all other computers/phones you use to access gmail and try setting it up in Mail on this computer again.

  • I downloaded iOS 7 and now my notes won't sync with iCloud

    I downloaded iOS 7 and now my notes won't sync with iCloud.  Also, all of my notes on iCloud aren't on my phone anymore, but they are still on my computer. Can somebody please advise how to fix this issue?  Thank you!

    Sounds like they are being overwritten by the server as soon as you reconnect.  With some effort you may be able to prevent this and recover your notes if you try the steps in Winston Churchill's post here: https://discussions.apple.com/message/22600445#22600445.

  • My iphone won't sync with outlook calendar

    My iphone 4 won't sync with my Outlook 2007 calendar.  It was working fine a couple of days ago and now it won't sync!!  Help!!!!

    Does iTunes Show an error message?
    How did you setup syncing with Outlook, are you syncing them via iTunes using USB or Wi-Fi or an Exchange server?
    For more info on USB syncing and all of the other options, take a look at this Apple doc -> iOS: How to transfer or sync content to your computer
    If you aren't sure try setting up USB syncing again, just connect the iPhone to the computer, open iTunes, click the Info tab across the top of the screen, scroll down to Contacts and choose to sync contacts.
    Contacts
    To sync contacts with your computer, choose  "Sync Contacts with" within iTunes for Windows, or "Sync Address Book Contacts" on your Mac.
    You can sync your contacts with:
    Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, or Windows 7)
    Windows Address Book (Windows XP)
    Windows Contacts (Windows Vista / Windows 7)
    Address Book (Mac OS X)
    Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
    Note:  If using Microsoft Entourage, use Microsoft Entourage 2008 12.1.2 or later  if syncing with Mac OS X v10.6 or later. If you would like to sync data on your Mac with Entourage, enable syncing between Entourage and Address Book.
    Notes:
    When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
    You can select a group of contacts to which all new contacts created on your iOS device will be added.
    Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail.  You will need to configure it with the user name and password for your Yahoo or Google account.

  • IPhone won't sync with Outlook calendars

    My iPhone was set up and syncing fine with my work email address (Outlook 2010). Then I had a second email account added to my Outlook so that I could get within an agency's address book and such. Once that happened, it stopped syncing. I've tried clicking in iTunes to "Replace information on this iPhone" and resetting the sync history. No dice. I've tried uninstalling iTunes and Apple device support and reinstalling, and that didn't help. In iTunes I have the choice of All calendars or Select calendar, but only one calendar (called "Calendar") is my option, and it doesn't sync either of my Outlook calendars.
    Any ideas?
    Thanks.

    Just to add to this. Another thing I thought of, is:
    If your outlook is connecting to an Exchange server (this includes hotmail services, MSN services and Live services) did you set up the iPhone mail account as 'exchange too'?
    If so, the iTunes won't need to sync mail data, calendars and tasks with your iPhone as all of this data is stores centrically on the server. Your iPhone only pulls the last 'x amount of days' OR the exchange server pushes the last 'x amount of days' worth of data.
    Because of this, there is nothing to sync. When you add a contact to iCal on the iPhone, it should sync with the server. IF NOT, check yours ync settings on the iphone mail, calendars and contacts setting for that particular account.
    OTHER SCENARIO: This applies to WebDAV calendars too.
    OTHER SCENARIO No 2: Read my previous post. If that doesn't work, then I would suggest referring to Microsofts Outlook KB's about external programs being blocked access to Outlooks Calendars Stores.

  • IPhone won't sync with iTunes anymore

    I'm not sure what happened, but iTunes won't sync with my iPhone 4 anymore at all. I changed my DNS server settings on my Mac and iPhone (because of stupid Comcast) and now I can't sync using wifi or usb. I reverted all my settings to how it was before and it still doesn't work. I'm all out of ideas and its starting to **** me off so any help at all would be GREATLY appreciated!!!

    Try this First... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    http://support.apple.com/kb/ht1430

  • I have moved my music to my new mac air but now it won't sync with my ipod or my iphone 4s

    I have transferred mymusic to my new mac air from an acer laptop via an external hard drive and it's all there on the mac but now itunes won't sync with my ipod touch or my iphone 4s.
    With the ipod it says 'iTunes could not connect to this iPhone. Could not connect to the device " It also doesn't show up at all in the devices section.
    With the iphone it says there isn't enough space to sync even though I have experimented and unticked various things including photos which takes up a lot of space. It seems like it wants to sync with the empty space on the iphone (very small!) and not with the whole thing. I have tried various things suggested on this forum but have had no luck.

    iOS: Device not recognized in iTunes for Mac OS X
    Also see:
    If you connect the iPod to another computer does iTunes not see it?
    What version of iTunes is installed?
    Whast model iPod and iPhone and what iOS version?
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    For the enugh space, you are trying to sync too much media to the iPhone

  • I have an iphone 4 that i use as an iPod. it is not connected to a telephone company. I updated to ios7 and now it won't sync with my computer

    I have an iphone 4 that I use as an iPod. It is not connected to a wireless network. I have updated to the IOS 7 and now it won't sync with my computer. Does anyone know what could possibly be the problem?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • My iPhone 5 won't sync with the Nike Plus sensor

    My iPhone 5 won't sync with Ike Plus sensor, new or old.

    Hello bfelix,
    You may need to switch 'Nike + iPod' off in your Settings, then re-enabling it. Make sure that the sensor is not in sleep mode (which can be corrected by pressing the small button on the side opposite the Nike and Apple logos). Depending on the age of the sensor, however, the battery may be depleted.
    Make sure you have the latest version of... iPhone... software and iTunes installed.
    Make sure the sensor is not in sleep mode by using a pen or stylus to press the Sleep/Wake button on your sensor once to wake it up.
    On your home screen, tap Settings.
    Scroll down and tap the Nike + iPod option.
    Disable the Nike + iPod feature and then re-enable it by tapping the On/Off button at the top of the page.
    Place the sensor back in the shoe and walk around to activate the sensor as you attempt to relink it to your iPod touch or iPhone 3GS.
    If the issue persists and you have access to another sensor, link the new sensor to your iPod touch or iPhone 3GS. If you can link the new sensor to your iPod touch or iPhone, take in your first sensor for service.
    Nike + iPod: Sensor not recognized by receiver, iPod touch (2nd generation), or iPhone 3GS
    http://support.apple.com/kb/HT1587
    Nike + iPod: About the sensor battery
    http://support.apple.com/kb/HT1400
    The Nike + iPod Sensor's battery is not replaceable or rechargeable and has a life of over a thousand active hours. The sensor has a sophisticated built-in power-management system, allowing the sensor to consume power only when active (that is, when it senses motion).
    Cheers,
    Allen

Maybe you are looking for

  • Setting the charset from an adapter module

    Hi folks, I'm trying to set the charset encoding of a payload using an adapter module (I know there is a TextCodepageConverterBean, but I want to set the charset for a message that hasn't one yet). The problem is probably more clear using an example.

  • Encoding Audio - Solution that worked for me

    Hi all, As some of you may or may not have known, i was having trouble with my iDVD project hanging at the encoding audio stage for about 24 hours. Yesterday i decided to try out a suggestion that i had seen on another thread somewhere. Appologies as

  • Something wrong with APPLE CULTURE

    Apple had been having problems with iWorks for about a week.  Sept 17th to be exact.  Now these things can happen but that is a long time a system like this to be offline.  Whether its everywhere is just some places hard to tell. and Apple is not for

  • ISE Backup Issue

    Hi, I've initiated a Full on demand Backup of my Administration node yet nearly 24 hours later I've still got nothing in teh Backup History and when checking the logs I can this message pretty much every hour on the hour Exiting DB cleanup as ISE bac

  • Downloading spreadsheet mime types via weblogic 6.1

              I'm having a problem with a jsp file -- within the weblogic v6.1           server environment that wasn't occuring when using v4.5.1.           The jsp page in question is supposed to handle downloading a           spreadsheet file via a 'p