3GS problems with new v4 system! Internet

I have an Apple IPhone 3GS and since uploading the new v4 software thru itunes I have had endless problems. When I am in a 3G network area my Internet and Mail does not work?? When I am out of a 3G network area it works but is obviously very slow. What the?? This is outrageous. ( I have even tried restoring factory settings to a new iPhone.
It's been a week now and I have tried nearly everything with no success. This is very frustrating and affecting my business so any assistance is appreciated.

Try Settings > General > Reset > Reset All Settings.

Similar Messages

  • Problems with New operating system

    I am using iphone 4s since i updated new operating system my phone unable to connect wifi autometically becomes very slow not supporting apps and its rebooting autometically.

    Try Settings > General > Reset > Reset All Settings.

  • Security Problems with new operating system (5.1)

    Using the new operating system you can use the camera when the ipod is locked. When you do this it overides the 4 digit security code giving full access to your ipod without entering the code. Surely this should not happen as the security of your ipod or iphone should not be compromised in this way. It needs a fix. Anyone else noticed this?

    Are you sure you are just not trying to access the iPod before the time you set the screen-lock to engage has passed?
    If the time period is set for say one minute and then you tell the iPod to sleep, you can still access the camera and then the whole iPod. But you can simply do that anywhap by jus sliging to to unloack.  If the time period has not passed you do not need to enter your passcode.  Othr users have forgot this and raised the same issue as you.

  • Problems with new A64 system

    Hello!
    I´ve finally got my new system... and some problems:
    A64 3200+CG
    MSI K8N Neo platinum
    OCZ EL DDR PC-3200 Platinum Limited Edition 512MB CL 2-2-2-7 1T
    Nexus 400W
    Hitachi SATA 160 GB
    First of all my system wont start with my Sparkle GeForce 4 ti4200 card.. When i put the power on the fans barely starts rotating and the system just shuts down..
    When i switch video card to my (very) old GeForce 2 GTS the system boots up just fine..
    I have even tried to disconnect all the chassis fans and cd drives but it still wont boot.. I have tried the 1.3 bios too with no success  
    My ethernet controller wont work either.. weird because the first 2 days it did.. but all of a sudden it couldnt connect to internet.. so im using my old PCI ethernet controller.. ive tried to re install the drivers but it doenst help..
    Maybe my motherboard isn´t allrigt?
    i would appreciate some help =)

    If your PS is like mine, each 12V Line has the rated amps on each. Say, each has 28amps being powered to it, not divided betwen them.
    Not knowing your set-up, try running your CPU, CPU fan on one line, and the HD and your other stuff and your case fans on the other, or try some other combinations.
    If your main peripherials are on the same line as your cpu, this could be too much of a drain on the on line at start-up.
    Just a thought.
    Good Luck!

  • A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

    I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
    At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
    I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
    I have reset IE9. Same problem.
    I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
    If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
    This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
    Any suggestions for how to solve this (other than using software rendering)?

    Thanks again for your reply. I appreciate the time you have taken to respond.
    I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
    I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
    This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
    The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
    1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
    2. Use another browser - I have no problems with either Firefox or Chrome

  • List of Problems with new Web Mail

    List of Problems with NEW Web Mail :
    - At first doesn't open full page message list or retain full page as default setting, have to drag down bar
    - Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down.  It should show at least 26, preferably all available
    - After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
    - Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
    - There is a drop down to select which folder to move a selected email to.  The initial display shows 7 usable choices, with the usual slider and arrow to show more choices.  The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear.  I can't move the selected field with arrow keys either.  I can select any of the visible 7 choices, and move an email to only one of the 7.  NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser.  Webmail should be FULLY web standard.
    - Occasionally a message will move from inbox to trash, without NO indication or command to move them.
    - Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear.  No time to read the error message either.
    - No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same.  Very unclear.
    - How can I switch my service back to the original, basic, email which works ok?  I know it’s still there, since some of my other accounts still access it!!!
    This seems my only way of getting this info direclty to the programming staff.  If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!  
    Thanks!

    vz_ric wrote:
    The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
    Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

  • 'A problem with the cooling system' error message on Satellite A660

    Hi all,
    Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
    The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
    The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
    As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
    I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
    Thanks

    In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
    I really dont know why this happen on your notebook and dont think there is anything you can do about it.
    I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

  • A problem with the cooling system has been detected

    I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

    What laptop do you have?
    - Peter

  • Premiere Elements 13 , Problems with new text/titles

    Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

    High ATR,
    Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
    Grafikkarte: NVIDIA GeForce 8800 GT
    If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
    As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
    Project settings are the following:
    General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
    Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
    The video is a mixture  of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
    When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
    Thank you for your service.
    thomasd
    Von: A.T. Romano 
    Gesendet: Sonntag, 1. Februar 2015 23:55
    An: Thomas Deschler
    Betreff:  Premiere Elements 13 , Problems with new text/titles
    Premiere Elements 13 , Problems with new text/titles
    created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano>  in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

  • Satellite P500-12D - A problem with the cooling system has been detected

    hi there everyone,
    I have bought a Satellite P500-12D which was a retail return. When I start it up it runs a couple of mins and then this comes up on the screen:
    Warning: A problem with the cooling system has been detected. please turn off the computer immediately and return it for service.
    In the toshiba health monitor the cpu is under 50% temp and if it goes much above that the cooling fan comes on and lowers it back down and the fan stops again, I have noticed that only the r/h fan runs to cool the cpu, should both them come on together? Could it be a software problem?
    Tthe unit is new without even the plastic off the screen surround or webcam. Any help or even point me in the right direction would be very appreciated, gary

    The fact that the pc is a retail return would indicate that there was a fault at day one and the customer returned it. At some point the retailer turned it on and since it appeared to work re-sold it.
    This is the cooling/fan report from a P500 produced by pc wizard 2010 - free from cpuid.com. Perhaps a comparison against the faulty laptop will point to the problem
    <<< Voltage, Temperature and Fans >>>
    > Hardware Monitoring : National LM79
    > Voltage CPU : 1.02 V
    > +3.3V Voltage : 1.02 V
    > +5V Voltage : 0.43 V
    > +12V Voltage : 1.02 V
    > Chassis Fan : 42187 rpm
    > Power/Aux Fan : 21093 rpm
    > Processor Temperature : 64 C
    > Mainboard Temperature : 16 C
    > Hardware Monitoring : ACPI
    > Thermal Zone : 48 C
    > Processor :
    > Intel Mobile Core 2 Duo (Core 1) : 57 C
    > Intel Mobile Core 2 Duo (Core 2) : 58 C
    > NVIDIA GeForce GT 230M : nVidia Driver
    > GPU Temperature : 35 C
    > GPU Diode : 35 C
    > GPU Fan : 100.0%
    > Hard Disk Monitoring : S.M.A.R.T
    > Hard Disk TOSHIBA MK5055GSX (Assembly) : 38 C
    > Hard Disk TOSHIBA MK5055GSX (Assembly) : 27 C

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router &amp; then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • Problem with the EFI system partition's file system.

    I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
    Problems were found with the partition map which might prevent booting
    Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
    However a verify disk on the volume partition gets a clean bill of health!
    I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
    Cheers

    I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
    I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
    http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
    I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
    Cheers.
    Bud

  • MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

    MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
    ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
    Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

    Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

Maybe you are looking for