3rd party HA middleware for Berkeley DB

Are there HA middlewares(such like OpenClovis) that support Berkeley DB? And if any, what's pros/cons of using those HA middlewares?
Thanks
Message was edited by:
user610522
Message was edited by:
user610522
Message was edited by:
user610522

I've also looked at using BerkeleyDB under the control of an AMF system, and I think that the two are compatible, but they would not be aware of each other, and it would be up to you to in your application to coordinate them.
The concepts are compatible though. An SI assigned to a 2N service group could be running 2 SUs, each of which corresponds to a BerkeleyDB environment in a 2-site replication group. The AMF would assign active/standby roles for the SI, and the application can translate that into MASTER/CLIENT calls to the repmgrStart() functions.
There are tricky details you need to work out though. You have two independent systems doing fault detection. i.e. If the BerkeleyDB repmgr framework detects a disconnect, it will conduct an election without asking for your permission to do so. What you can do with the AMF is watch for changes to the master/client role. If you are demoted from master to client, but still assigned the 'active' role to the SI by the AMF, you can report an AMF error, so that the AMF will failover the SI. This would keep the SI-active assignment in-sync with the BerkeleyDB assignment of the Master site, for a 2N service group, anyway.
As this note might imply, I have looked at doing this myself.

Similar Messages

3rd Party Plug-ins for Illustrator

EskoArtwork has a Dynamic Barcode 3rd party plug-in for Illustrator that is listed on the Adobe wesbiste for Illustrator CS6. I puchased it and downloaded it but during the install I get a message saying it can't find a compatible Adobe Illustrator installation on my computer (I have CS6 installed). Upon reading the information on EskoArtwork's package, it says it is only compatible with CS4, CS5 and CS5.5. Is there a way to get this to work with CS6? If not, I would suggest Adobe take it off their list of Plug-In's for CS6.
Also - if it is not compatible, does anyone know of a similar plug-in that would generate and insert bar codes into packaging designs?
Thanks!

You'll probably need to ask EskoArtwork about this.
In past versions, I've been able to move plugins from the plugin directory for the old version to the new version, and often it worked. (YMMV, it depends on changes in the SDK.) You might try creating empty directories for a CS5 version number to see if the installer will work.

What is the best 3rd party optical drive for my mac?

What is the best 3rd party optical drive for my mac?

I really like this drive, it reads/writes DVD's and CD's just fine on my mac and on my PC aswell also it has only 1 USB so it will only take up one of your 4 USB's
Amazon UK link
Amazon US link

Developing 3rd party UWL Connectors for People soft system or other Java sy

Hi Everyone
We have one requirement that is u201CDeveloping 3rd party UWL Connectors for People soft system or other Java systemu201D and get the workflows from those system and display in portal though UWL.
We used u201CUWL Custom Connector APIu201D and written all the required methods.
Could any one help us u201CWhere can we specify the 3rd party system details?u201D
If possible please send some sample coding for it.
Thanks in advance
Sat

Hi Satya!
Like the default SAP backend UWL connectory your 3rd-party connector should make use of a PCD System Object. This system is a mere java component with nothing more than a portalapp.xml defining all the system properties.
Create a system in the portal system landscape based on the System PAR you depoyed.
For every UWL connector you create in portal you define a system alias. This alias has to match the one of your new system object.
And now for the sad part: I didn't find any clue yet about how to access the system from a custom UWL connector. The system alias is available in the method getItems(), but no hint whatsoever how to get the system object to the alias.
I'm still investigating this, since i'm exactly at this point.
Regards,
Juergen

3rd Party Email Application for CF

I know there are 3rd party email applications for CF ... Can
anyone point me to them and/or let me know if they have worked
better. I'm looking for more power with email (tracking, sending,
routing, etc).
Thanks,
Joe

Yeah, that might be to much. Normally, CF will directly send
to your mailserver (usually IIS mail services) and if something
goes wrong your only options reside in looking at the CF logs if
you're logging mail. But I know there are some third party apps
that do more tracking/resending then send to your mail server (and
or better bulk mail processing). In your case you've just handled
it more complexly by using an Exchange Server. That will be
overkill for me plus a good amount of time learning and installing
(not to mention price tag).
Joe

Trouble with 3rd party VST installs for Garageband, can't find instruments

Hi,
I am having trouble with Audio Units for Garageband when installing 3rd party software, VSTs, loops, instruments. I have more issues with Logic Pro. I am hoping that it is the same underlying issue and that I am just missing something. I have the manuals (not great for troubleshooting). I am confused with some installs use User Library and others use the Computer Library. I do go to the mfgs sites for updates. The installs sometimes work as standalones but I don't see ALL of the components of the software in say Garageband or Logic. Mostly, I am missing the "instruments" and "loops" that I want to access within the DAW. Some examples:
• Here is some of the software I am talking about: East West sample libraries (Play and Native Instruments); Vienna Symphonic librarires; Sylenth1 (just last night); Sample Tank 2 and Total Workstation 2 from IK Multimedia and others.
• In GB I see the Audio Units for Vienna, Play, Sylenth, some of the IK Multimedia but NOT any instruments when I go to the "Sound Generator" -- I seem to be missing the instruments and loops. I see less AUs in Logic Pro. Some of these are VST instruments.
• Can I just drag-drop samples to the library folders to fix this?
• The plug-ins do not seem to work (though Sylenth1 worked for a single sound). When there is a standalone app (as in Sample Tank), I finally got the "sounds" to be reinstalled and loaded, those sounds/samples don't show up in any DAW.
• When and if the sounds/loops/samples show up in GB's "Instruments" section will I be able to tell that they belong to that particular software or library?
Thanks in advance.
John

Found the answer myself, it was simple:
• Select the Track
• Show the Instrument (info area)
• Click on Edit
• Click on the "Sound Generator" pop up field.
• At the bottom of the pop-up list, select from the Audio Units that you have installed. This is where you see "Sample Tank 2, Vienna Instruments..."
• NEXT -- IMPORTANT: CLICK ON THE PICTURE next to the Sound Generator pop-up field.The AU unit loads up, the interface pops up, you load up the instruments in this AU Unit. You do NOT see the sounds from the AU unit in the normal Apple instrument list.
This was not intuitive but once you know it, fairly simple.
Still, the devil is in the details -- more questions on the way.

Install 3rd party PDF iFilter for index PDF file as attachment in e-mail (msg)

I have called Microsoft Permium Support, base on the reply, SharePoint 2013 does not support to index a PDF file attachment in E-mail (msg) except 3rd party iFilter installed. And they finally told me how to edit Windows Registry for install the Adobe iFilter.
But, the Adobe iFilter is too weak to call large PDF files. So, I would like to install and try the Foxit PDF iFilter, but I cannot find an installation guide for this 3rd party ifilter with SharePoint 2013.
Does anyone here have the experience for Foxit PDF iFilter with SharePoint 2013 can help me?
I am not sure it is bug or feature in SharePoint 2013, but in case I still have to install 3rd party iFilter for index PDF file. I have no idea what is the out of box pdf file indexing support for.

You ca plan to use Foxit.
steps are nearly the same which we use in sharepoint 2013
1. We need to update registry for pdf . Registry value is {987f8d1a-26e6-4554-b007-6b20e2680632}
2. we need to install the foxit ifilter
Here are steps for same
http://support.microsoft.com/kb/2293357
3. run below command:
net stop spsearch4
net start spsearch4
net stop osearch14
net start osearch14
Check below:
http://bjarnegram.wordpress.com/2011/07/13/installing-foxit-pdf-ifilter-on-sharepoint-server-2010/

Is 3rd party software required for auto creation of DIR for scanned copy,

Hello SAP gurus.
The current business process is there are 100s of service order, (IW31 creation TC) and each service order has its own 50-60 external documents attached to it.
unfortunately there is no standard link from SAP DMS at Service order (lW31, TC) level.
Here i tought of creating a document folder in EDMS or structure with the reference of service order No. And keeping this service order as reference we need some 50-60 documents (files) to be directly assigned to the main service order No, with out any manual intervention.
Here is what the user does in the present system
With our client in the present system they use a 3rd party software for mail and scanner interface, here Any x, y, z user scans an document or Mails a document with attachments, just giving the subject line as the Service order already created.
The document attachment directly comes and sits inside the predefined Service Order folder. Along with the user name who sent the document and the time he sent the document.
Is the same thing possible in SAP ie.. Creating or attaching documents with out any manual interventions taking the reference of Mails sent having the subject line as the DIR
Does this require 3rd party interference to do this, will any BAPI /BADI to do this for DMS with out 3rd party software.
is there any upload programme that should be used which will avoid 3rd party software.
please explain. points waiting.
Thanks and warm regards
Priya S
Edited by: Priya S on Mar 16, 2009 4:32 PM

Hi Priya
Creation of New Object link is not so hard job.If any expert ABAP Consulatnt is available he can do in a week.But It all depend on his understanding of functionality clearly and quicky.
For developement of new object link check this link.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
They work fine if you develope it as per procedure in above link.You just need good ABAP'er.
If you are trying upload Proggramme to upload the files daily basis from folder you can do this .
Just create folder on desktop put some docuemnts and run BDC to upload the document to DIR.I had tried once. Get help of Good ABAP'er to do your job.
If any help please get back.
With regards
Mangesh Pande

3rd party sat nav for e51

i am looking for a 3rd party sat nav that is compatible with my e51, i understand that i need an external receiver but am not sure which one would be the best for my phone?
ideally the mapping of the sat nav would be topographical as well as street mapping to maximise its use.
any ideas outhere would be appreciated.

Hi mal5336
An indication of your worldwide location may help in choice of application here as some providers maps are better for particular regions. Nokia do produce two external Bluetooth GPS receivers LD-3W and LD-4W but cheaper alternatives are available, but it would be an idea to try before you buy as software updates to Nokia devices have been known in the past to introduce compatibility issues unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Will 3rd party graphics card for MacPro1.1?

Hello, all! ^^
I'm looking for a replacement graphics card for my MacPro 1.1 and now narrowing down to:
NVIDIA GeForce 7300 GT or 8800 GT now.
I'm looking at used ones now and wondering if 3rd party cards with those chipset above will work or,
if it has to be exactly Nvidia Geforce cards.
Can anyone help, please?
Thanks! ^^

Upgrade OS X to Snow Leopard and replace the GPU with Apple's ATI 5770.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

What are the 3rd party text editors for oracle?

hi guys,
I was wonder does any one know any 3rd party text editor available for Oracle(for free!)
Just like ot SQL server 2000 which provides a nice texteditor to type all the SQL commands, is there a one liek that for Oracle?
Message was edited by:
user502781

Oracle provides SQL Developer for free. It is quite adequate for my purposes.

Looking for high quality 3rd party TTS voices for OSX

Looking for suggestions for commercial, high quality, 3rd party TTS voices. In the Windows world I was a happy Ivona user, but Ivona does not support Apple products. The best OSX TTS voices I've found so far are from Infovox ... better than the built-in TTS voices ... but no where close to Ivona.

There are additional OS X voices that you can download as part of the operating system.
System Preferences > Dictation & Speech > Text to Speech > System Voice > Customize.
Download the addtional voices from the list and then select to use.

Auditing and restricting 3rd party vendor access for compliance and sec purposes

There are two products out there that I am looking into for managing 3rd party vendor access to our systems. The first one is Bomgar's Embassy. I'm not too sure if it's a separate product from their standard remote support products or just an added feature. Also I am aware that Bomgar's licensing can be pretty pricey.The second product I was looking into is called SecureLink. It seems to have all of the bases covered in terms of auditing and restricting but there are not a whole lot of reviews of the product or live demonstrations of it. Even the video on their site shows XP screens so I'm fearful that the product development has been halted.If anyone has any experience with these products or others I would be very interested to hear what you have to say.
For anyone that's curious, what we are currently doing is just policy based. No...
This topic first appeared in the Spiceworks Community

There are two products out there that I am looking into for managing 3rd party vendor access to our systems. The first one is Bomgar's Embassy. I'm not too sure if it's a separate product from their standard remote support products or just an added feature. Also I am aware that Bomgar's licensing can be pretty pricey.The second product I was looking into is called SecureLink. It seems to have all of the bases covered in terms of auditing and restricting but there are not a whole lot of reviews of the product or live demonstrations of it. Even the video on their site shows XP screens so I'm fearful that the product development has been halted.If anyone has any experience with these products or others I would be very interested to hear what you have to say.
For anyone that's curious, what we are currently doing is just policy based. No...
This topic first appeared in the Spiceworks Community

Prevent 3rd Party PO Create for SO with Delivery Block

We use Delivery Blocks on our Sales Orders as temporary blocks, for example if our Customer has sent a potentially duplicate order. However, the 3rd Party PO creation process ignores the Delivery Block (as you would expect, there's no Delivery), but we want to prevent the PO from being created. Our preference is to prevent the PO from converting the Req, rather than do something to the Req, or change the item category etc, as this leaves us with a much cleaner process if the order IS required. In that scenario, the DB could be removed, and the next ME59n batch job would pickup the open Req.
We have activated User exit ME590001 and included a check for the order DB, and this works for POs created via ME59n. However, the vast majority of our 3rd Party POs are created via Workflow process, and the exit we created does not trigger.
Does anyone know of a userexit we could use that would work any time a PO Req is converted to a PO, regardless if it's ME59n, ME21n, or Workflow etc, i.e. at the application level ?
Thanks, Paul.

Hi Paul,
You may try enhancement MM06E005.
Thanks and regards,
Polly

Favorite 3rd Party Plug-ins for FCP X?

Hey, everyone.
I was wondering what are some 3rd party plug-ins that you folks are using that you recommend?
I'm using FCPeffects' Light Rays. Works well for me.
Thanks!

ShrinkRay from CrumplePop i cool.. and their splitscreen also..

3rd party HA middleware for Berkeley DB

Similar Messages

Maybe you are looking for