3rd party router does not have PPPoA option and wo...

Hi there, I just switched to the regular BT Broadband this week, and I opted out of a Home Hub 4 as I already own a modem + router that I used to connect to my old ISP with in bridged mode.
However, for some reason I cann't get this same setup to work with BT Broadband. If I connect my modem up on its own and set it to PPPoA/PPPoE mode, and enter the BT username and password, the internet works fine, however if I connect the modem to my router's WAN port, set the modem to bridged mode, and enter the appropriate settings into my router, it simply does not connect.
My modem is a TP-Link 8817 and my router is an Asus RT-N15U.
On my modem there are the following encapsulation settings I can use: "Dynamic IP Address", "Static IP Address", "PPPoA/PPPoE" & "Bridge Mode".
On my Asus router, there are the following encapsulation settings: "Automatic IP", "Static IP", "PPPoE", "PPTP", "L2TP".
I received a sheet with my modem showing the settings for each UK ISP, and it states that BT Broadband uses PPPoA, however my Asus router only has a PPPoE option and it's not connecting when I choose this option whilst my modem is in bridge mode.
Can anyone help me, or am I simply snookered?

As the Asus is PPPoE only I think you may be out of luck unless one of the gurus has any ideas. You may have to put it in a box until you get infinity- sorry.
I presume you were on an ADSL connection with your previous ISP.

Similar Messages

I have a gen 3 ipod and can't get it into disk mode. In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself. Any ideas?

I have a gen 3 ipod and can't get it into disk mode. In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself. Any ideas?

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

I want to restore the secret question and I does not have the option of sending e-mail to restore

I want to restore the secret question and I does not have the option of sending e-mail to restore

Go here, find your country and follow the directions to contact Apple for help.
http://support.apple.com/kb/HT5699

HT4972 My iPhone 3 does not have an option in settings to update my software. How do I update it?

My iphone 3 does not have an option in settings to update the software. How do I update it?

The iPhone 3 G can only update as far as iOS 4.2.1
It is Not Compatable with any later iOS

The wifi available in the building I live in requires you to accept a user agreement each time you log on (obviously Apple TV does not have the option to display a browser webpage, so is there any other way to connect my Apple TV to the wifi??

Hi guys,
I cannot get my Apple TV to connect to the only available wifi connection in my building.
Basically when I log on to it with other devices you have to type in a password (like all wifi connections) but then it opens a browser window with a user agreement that you have to accept each time you log on. Since Apple TV does not have a browser option I can't log it on.
Is there anyway around this issue???
Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
Thanks guys!

Is there anyway around this issue???
Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
Unfortunately not.

HT4623 im trying to update my phone and have goggled how to but my phone does not have the option to click on software update has anyone else had this problem and if so how did you go about it. thanks in advance.

Im trying to update my iphone 4s as i can't dowload alot of thing as it says i need to update to IOS 5 i have googgled how to do it but my phone does not have software update option on it. does anyonw know how to fix this problem or had this problem? if so how did you go around fixing it and updating the phone. thanks in advance.

gemsmobiletans wrote:
my phone does not have software update option on it.
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes Installed
iTunes free download from www.itunes.com/download
Note:
The Current iOS for the iPhone 4s is iOS 7.

I want answers to securtiy question does not have rescue email and does not want to lose the fifteen dollar gift card i just put on my accout by setting up a new one and does not want to lose all my music how can i fix this

i have forgoten the answers to my security questions and does not have a resuce email and i donot want to loose the $15 giftcard i just put on there or any of my music by setting up a new accout and all i use to download items is giftcards. what should i do?

plarkin wrote:
should I do a full reset of TM (per the instructions at the link below) prior to setting up the TC?
I'd start by just selecting the new destination. Do the "full reset" if you have trouble with that.
do I need to set up the network portion first and then turn on TM?
That might make things easier.
even though my mini was previously only connected wirelessly to the old router, I plan to connect via Ethernet to the TC (for one thing, to make the initial backup run faster). Do I just turn AirPort settings off on the mini, or does that need to be on in order to setup the TC?
To assure that your first backup is over Ethernet I'd turn off AirPort until it's done. Check the order in the Network panel of System Preferences. I'd move the Ethernet connection item to the top of the list.
In other words, does the initial setup of the TC from my mini happen wirelessly or over Ethernet?
Either way should work fine.
I currently have a networked printer conneceted to my old router, which I will connect via Ethernet to the TC. Can I assume that, once I have set up all of my family's PCs/Macs/iDevices on the newly-established TC network, that I will have to re-establish connection to the printer as well?
Not necessarily. I'd only do that if the printer isn't available after the switchover.
I would like to reformat the second external drive (the one previously being used for TM backups) for possible reuse with another computer. Can I simply reconnect this to my mini and reformat?
That's what I'd do.
is TM going to see it and try to back it up?
If you've already reconfigured Time Machine to use the Time Capsule drive, there shouldn't be a problem.

Received ipad2 synced to itunes and uploaded my backup, now I find out it does not have WiFi 3G and need to return it, is there a way of getting all of my data off the ipad2?

Received ipad2, synced to itunes and uploaded my backup from my Ipad, now I find out that it does not have Wi-Fi+3G, need to return it, is there a way to get my data off the ipad2 so I can return it?

if you mean restore it to factory default then you can choose that while having it connected to the computer and using itunes

My netgear router does not recognize my password and i cannot access it with my iphone

My Netgear DG834PN router does not recognize my user name or password when i try to access WI FI with my iphone.I cannot get wifi on my iphone from this or any router. The router is a wireless and hardwired unit.

Is your password by any chance in Hex? (all numbers or letters a through f) If so you may be able to translate the hex into ASCII or you could change to an ASCII password. I had to make that kind of change. Good luck.

My OS X does not have app store and has no updates available

my OS X does not have app store icon or anywhere in the apps, and has no updates available

App Store is only available with 10.6.6 or greater.
In order to get to this release you must buy a Snow Leopard DVD.
Allan

Hi, my ipod does not have software update and on itunes it says chack for update but says ipod is up to date

Hi my ipod does not have software update on settings and on itunes it is up to date please give solutions

Thanks. I have been looking for this information for hours too. You answered my question in your list. I have a 2nd generation iPod Touch and last updated to iOS 4.2.1. Now many of the games are obsolete after being updated. I wish I hadn't updated them now, and I would still have play available. It's sad in this economy that I'll have to purchase a new iPod touch just to play a few simple games. I haven't even had it three years yet. That's what I get for not waiting a few months for the next generation. That's a nice little marketing tactic from Apple .

Airport does not have IP address and Self assigned IP address

Using a 2.66GHz Mac Pro with OS X.6.6 and a Netgear DNG200 wireless and installed Airport Extreme Card and WPA2 security.
In Network click on Airport and 'Turn on Airport' Up comes the message 'Airport dos not have IP address and is unable to connect to the internet'.
Go into advanced and double click 'Network Name'. Supply password even though remember is selected, and message changes to "Airport has Self Assigned IP address 169.254.etc.etc and will not be able to connect to the internet'.
After repeated back to Network Name and double clicking and supplying password eventually connects. Simple to reconnect by selecting Turn Airport On in Menu Bar so long as the machine is not turned off.
Any suggestions please?
Message was edited by: harryb

Hi,
http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/
Hope it helps.
Cheers.

13rMBP Mid2014 HDMI does not have 3840x2160 option?

Does the rMBP 13" Mid2014 HDMI connection allow 3840x2160 resolution?
Support article: HT6008 says it should for this model.
You can use 4K displays and Ultra HD TVs at the following resolutions and refresh rates via the built-in HDMI port.
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
I have it directly connected to my HDTV via HDMI cable and selected 24hz as I know it does not support 60hz.
Only offers 1080p....
I tried a miniDP to HDMI adapter and that did not work and it used to. I think this adapter may not support 4k or be an active adapter.
Just ordered an active adapter that should work, but I am believe it should work through HDMI port on this unit based on HT6008 article.
-R

I just found another thread that has my same exact issue.
Can't get 4k support with Seiki 39" TV through HDMI
Will follow that thread for resolution.

3rd party router does not have PPPoA option and wo...

Similar Messages

Maybe you are looking for