5.2 -- GOTO SE16 and enter TSTC for TABLE NAME. TCODE FIELD /VIRSA*

Should the following tcodes work? If so, how do I troubleshoot the ones that don't work? If not, how do they get configured to work? Can someone provide a link for documentation?
TCODE                                  TTEXT
/VIRSA/ALERTGEN                  Activity Monitoring
/VIRSA/MICCONFIG                  Virsa MIC User mapping Configuration
/VIRSA/ORGUSRMAPPING    Maintain ORGUSERS table
/VIRSA/RE_DNLDROLES       Role Expert 4.0
/VIRSA/VFAT                  Firefighter
/VIRSA/VRMT                  Role Expert
/VIRSA/ZMGMTRPT                  Management Report Graphical View
/VIRSA/ZRTCNFG                  Risk Terminator Configuration
/VIRSA/ZRTDELLOCK            Delete Role Lock
/VIRSA/ZRTRGLOG                  Risk Terminator Role Generation Log
/VIRSA/ZVFAT_U02                  FirefightId Log summary
/VIRSA/ZVFAT_U03                  Reason/Activity report
/VIRSA/ZVFAT_U04                  FirefightId Transaction Usage
/VIRSA/ZVFAT_U05                  Invalid Firefighter Ids/Owners/Cntrl
/VIRSA/ZVFAT_U06                  SOD Conflicts in Firefighter
/VIRSA/ZVFAT_U07                  Data Migration from Master to Text
/VIRSA/ZVFAT_V01                  Log Report
/VIRSA/ZVFAT_V02                  Log Report
/VIRSA/ZVRAT                  SAP Compliance Calibrator
/VIRSA/ZVRATBAK1                  Update data for Mgmt Graphical View
/VIRSA/ZVRAT_C01                  Security & Controls Policies
/VIRSA/ZVRAT_COVN            Conversion of CC tables, Old to New
/VIRSA/ZVRAT_D01                  Download Spool Requests by Job Name
/VIRSA/ZVRAT_L01                  Conversion Utility for CC Text Table
/VIRSA/ZVRAT_L02                  Conversion Utility for Long Texts
/VIRSA/ZVRAT_M01                  Upload/Download CC tables
/VIRSA/ZVRAT_M02                  Where Used list of Mit. Control Id/M
/VIRSA/ZVRAT_M03                  Analyze disabled SOD TCode & Object
/VIRSA/ZVRAT_M04                  Optimizer for SOD Data Table
/VIRSA/ZVRAT_M05                  Where Used list of Control Id/Monit
/VIRSA/ZVRAT_MG1                  Management Cockpit
/VIRSA/ZVRAT_P01                  Display changes to Profiles
/VIRSA/ZVRAT_R01                  Count authorizations in roles
/VIRSA/ZVRAT_RB2                  Rule Architect
/VIRSA/ZVRAT_RB3                  Rule Architect Conversion
/VIRSA/ZVRAT_S01                  Monitor Conflicts & Critical Trans.
/VIRSA/ZVRAT_S021                  Monitor Conflicts & Critical Trans.
/VIRSA/ZVRAT_S03                  Download Objects for Tcodes
/VIRSA/ZVRAT_S04                  SOD Conflicts for TCodes and Objects
/VIRSA/ZVRAT_S05                  SOD Rule Wizard
/VIRSA/ZVRAT_S06                  SOD Rule Validation Tool
/VIRSA/ZVRAT_S07                  Non Reference Report
/VIRSA/ZVRAT_S08                  User Access Report
/VIRSA/ZVRAT_S09                  Comparing diffrent SOD Matrices
/VIRSA/ZVRAT_S10                  Tcodes by Roles/Profiles, never exec
/VIRSA/ZVRAT_S11                  Authorization object by Roles/Profs
/VIRSA/ZVRAT_S12                  Transactions executed by Users
/VIRSA/ZVRAT_S13                  Comparing Critical Tcode Matrices
/VIRSA/ZVRAT_S14                  Comparing SOD Authorization Matrices
/VIRSA/ZVRAT_S15                  Compare Sod Tcode & Authorization
/VIRSA/ZVRAT_S16                  Comp.Calibrator Data Maintenance
/VIRSA/ZVRAT_U01                  Count authorizations for Users
/VIRSA/ZVRAT_U02                  Analysis of called trans in Cus.code
/VIRSA/ZVRAT_U03                  Management Report
/VIRSA/ZVRAT_U05                  Expired and Expiring Roles for Users
/VIRSA/ZVRMT_U01                  Check Role Status
/VIRSA/ZVRMT_U02                  Check Tcodes in Menu & Authorization
/VIRSA/ZVRMT_U03                  Compare Users Roles
/VIRSA/ZVRMT_U04                  List roles assigned to a user
/VIRSA/ZVRMT_U05                  Where used list for roles
/VIRSA/ZVRMT_U06                  List roles and transactions
/VIRSA/ZVRMT_U07                  Create/Modify Derived Roles
/VIRSA/ZVRMT_U08                  Analysis of Owners Roles and Users

Hi Greg,
Most of the TCodes work but they are not being used. Which products do you currently have? Most of these tcodes are obsolete as they were part of old Virsa products. Here is the explanation:
-> At the start, Virsa had five different products namely Compliance Calibrator (CC), Fire Fighter (FF), Role Expert (RE), Risk Terminator (RT) and Access Enforcer (AE). Except AE, all other products were developed into SAP R/3 using ABAP so the transaction you see are coming from those four products. As of now, CC and RE has been moved to Java (same as AE) but RT and FF still reside in ABAP side.
-> You should be able to configure Tcodes related to FF and RT. You do not need to configure Tcodes for CC and RE.
-> You must be wondering how did you get all these Tcodes? Through the RTA (Real Time Agent) you have installed for GRC AC 5.2 in your SAP backend system. Even though, AC 5.2 does not need full blown products in the back-end, RTA still contains all of those products.
-> To start using these products, you will have activate BC sets. I do not recommend you to use CC and RE, if you are already using those products via Web front-end. FF and RT has some pretty good features.
-> Please follow AC 5.2 configuration guide to configure FF and RT.
If you don't want to use any of these, don't bother. These tcodes don't affect anything in your system.
Regards,
Alpesh

Similar Messages

Space Allocated and Space used for Table.

Hi,
Is there any way, we can find Space Allocated and Space used for Table wise.
I know USER_TABLESPACES help use to find table space wise. But I would like to know, the space utilized by each table in the specific table space.

Check this link from Tom Kyte about it.
http://asktom.oracle.com/pls/asktom/f?p=100:11:2092735390859556::::P11_QUESTION_ID:231414051079

How to use bind variable value for table name in select statement.

Hi everyone,
I am having tough time to use value of bind variable for table name in select statement. I tried &p37_table_name. ,
:p37_table_name or v('p37_table_name) but none worked.
Following is the sql for interactive report:
select * from v('p37_table_name') where key_loc = :P37_KEY_LOC and
to_char(inspection_dte,'mm/dd/yyyy') = :P37_INSP_DT AND :p37_column_name is not null ;
I am setting value of p37_table_name in previous page which is atm_state_day_insp.
Following is error msg:
"Query cannot be parsed, please check the syntax of your query. (ORA-00933: SQL command not properly ended) "
Any help would be higly appreciated.
Raj

Interestingly enough I always had the same impression that you had to use a function to do this but found out from someone else that all you need to do is change the radio button from Use Query-Specific Column Names and Validate Query to Use Generic Column Names (parse query at runtime only). Apex will substitute your bind variable for you at run-time (something you can't normally do in pl/sql without using dynamic sql)

How to pass parameter for table name in form6i.

Hi ,
I am facing the problem to pass parameter for table name in form6i.
If any solution please infirm me earliest to my mail id.
([email protected])
example:
begin
select ename into :ename
from :tab_name
where empno =7788;
end;
It gives error as bad bind variable 'tab_name'
*** where :ename and :tab_name are form fields
Thanking you,
Balasaheb

object name not taken as table --> what do u mean by
this?
Please be more clear..
Regards
PriyaI have two block. First block I am displaying all the table using user_objects table. Another block I want display, user which table selected, corresponding table all the records.

Can substitution strings be used for table name references?

Hi,
I was wondering if it's possible to use substituion strings for table names in SQL queries. This would allow for me to edit all references to a table at one location. For instance, if a table name or dblink changed, I could edit the substitution string or application item to ensure all the queries reference the new table.
For example:
select * from &table1.
table1 would be the substitution string for the actual table name
I know this is possible if I used a pl/sql function returning a query, but I would much rather use a substition string in a SQL query.
Thanks in advance.
Brian

i think not
because how create the fields of * in this case
in the other because all is dynamic, i think that you obtain only an error

Problem while enter address for business partner-tcode BPC1

Dear Experts,
I have already enter address for business partner completely in BPC1, but after saving, the data has been entered always gone and message appears: "Enter address for business partner".
Please somebody advice me about this issue.
Thank you in advance.

Please check this thered follow the steps.
[BDT|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6173fb9e-0701-0010-6083-a0001827a6ff]
Create a field group--> attch fields over there.
Create a view > attach a field group over there.->If you double click the view , you have to create one screen and attach function modules for PBO and PAI.
create a section --> Attach your view.
Create a screen ---> Attach your section.
Regards,
Siva

HELP! my mac has logged me out and now asking for a name and password?

I was logged on shopping on top-shop online and suddenly the mac shut down.
It seems it has reset its self! My icon has disappeared and its now asking for a name and password.
i have tried my log in but it is not working.
Is there another way to reset the password?
can i reset it to log back in what can i do?
I have rebooted the computer several times but i dont know what to do!

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Using a Variable for Table Name with a cursor

Hello All
Is it possible to use a Parameter passed to a procedure as the table name
in a cursor selection statment. I thought the below would work but I get
a error. Does anyone have any ideas?? The Error is listed below to.
Here's the code I just complied
CREATE OR REPLACE PROCEDURE Dup_Add(NEWQATABLE IN VARCHAR2) IS
CURSOR c1 IS SELECT MUNI,PROV FROM NEWQATABLE GROUP BY MUNI, PROV;
c1rec c1%ROWTYPE;
BEGIN
OPEN c1;
LOOP
FETCH c1 INTO c1rec;
EXIT WHEN c1%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(c1rec.MUNI);
END LOOP;
CLOSE c1;
END;
Here is the errors
LINE/COL ERROR
3/8 PLS-00341: declaration of cursor 'C1' is incomplete or malformed
3/15 PL/SQL: SQL Statement ignored
3/38 PLS-00201: identifier 'NEWQATABLE' must be declared
5/7 PL/SQL: Item ignored
10/3 PL/SQL: SQL Statement ignored
10/17 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
12/3 PL/SQL: Statement ignored
12/24 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
LINE/COL ERROR
Thanks
Peter

If you are going to have a table name or a column name as a parameter, then you have to open the cursor dynamically. The following example uses Native Dynamic SQL (NDS) to open a ref cursor dynamically. I also eliminated the group by clause, since it is intended for use with aggregate functions and you weren't using an aggregate function. Also notice that there are some other differences in terms of defining variables and fetching and so forth.
SQL> CREATE TABLE test_table
2 AS
3 SELECT deptno AS muni,
4         dname AS prov
5 FROM   dept
6 /
Table created.
SQL> CREATE OR REPLACE PROCEDURE Dup_Add
2    (newqatable IN VARCHAR2)
3 IS
4    TYPE cursor_type IS REF CURSOR;
5    c1 cursor_type;
6    c1muni NUMBER;
7    c1prov VARCHAR2 (20);
8 BEGIN
9    OPEN c1 FOR 'SELECT muni, prov FROM ' || newqatable;
10    LOOP
11      FETCH c1 INTO c1muni, c1prov;
12      EXIT WHEN c1%NOTFOUND;
13      DBMS_OUTPUT.PUT_LINE (c1muni || ' ' || c1prov);
14    END LOOP;
15    CLOSE c1;
16 END;
17 /
Procedure created.
SQL> SHOW ERRORS
No errors.
SQL> SET SERVEROUTPUT ON
SQL> EXECUTE dup_add ('test_table')
10 ACCOUNTING
20 RESEARCH
30 SALES
40 OPERATIONS
PL/SQL procedure successfully completed.

Create Unique Index On Flow does not work for table names 23 characters

I have a "create unique index on flow table" step that is dynamically generated by the IKM.
The index name that is generated by the IKM is based on the table name except that the created index name is prefixed with "I$_" and ends with "_idx". Obviously, since Oracle table names can not exceed 30 characters in length, the index creation step will fail if the base table name exceeds 23 characters.
I have tried to substring the index name generation step in the IKM so that it only uses the first 23 characters of the table name, but have not had any luck with using the "substring" command together with snpRef.getTable call.
This is the section of the IKM that I desire to change:
- <Field name="Txt" type="java.lang.String">
- <![CDATA[
create unique index <%=snpRef.getTable("L","INT_NAME","W")%>_idx
on <%=snpRef.getTable("L","INT_NAME","W")%> (<%=snpRef.getColList("", "[COL_NAME]", ", ", "", "UK")%>)
<%=snpRef.getUserExit("FLOW_TABLE_OPTIONS")%>
]]>
</Field>
I would like to change the above to something similar to the following (note the only change is the addition of substring(1,23))
- <Field name="Txt" type="java.lang.String">
- <![CDATA[
create unique index <%=snpRef.getTable("L","INT_NAME","W")*.substring(1,23)*%_idx
on <%=snpRef.getTable("L","INT_NAME","W")%> (<%=snpRef.getColList("", "[COL_NAME]", ", ", "", "UK")%>)
<%=snpRef.getUserExit("FLOW_TABLE_OPTIONS")%>
]]>
</Field>
Any help greatly appreciated. Thanks.

As the index is temporary, just like the I$ talbel, the easiest way is to replace the table name with some unique identifier like the session is:
bq. I$_<%=odiRef.getSession("SESS_NO")%>_idx
If for some reason that is not unique enough, add the NNO:
bq. I$_<%=odiRef.getSession("SESS_NO")%><%=odiRef.getSession("NNO")%> \\ _idx

Querying the schema for table name with column value!

In my schema i have 500+ tables and other objects.
i have a column with the name BO_PRODUCT_CODE.
I wants to know in what tables the value of BO_PRODUCT_CODE='FX03'.
i have query the user_tab_columns which gives me the result with 90 tables having the column BO_PRODUCT_CODE.
What is query which will give me the exact number/name of the table whose column value is FX03. ie, BO_PRODUCT_CODE='FX03'.

Hi you can use this approach:
BEGIN
v_str VARCHAR2(250);
v_count NUMBER :=0;
DECLARE
FOR loop_tbl IN ( SELECT DISTINCT table_name FROM USER_TAB_COLUMNS
WHERE column_name ='BO_PRODUCT_CODE' )
LOOP
v_str := 'SELECT COUNT(*) FROM ' || loop_tbl.table_name || ' WHERE BO_PRODUCT_CODE=||'''' ||'FX03' || '''' '
EXECUTE IMMEDIATE v_str INTO v_count ;
IF v_count > 0 THEN
DBMS_OUTPUT.PUT_LINE ('Table Name :'|| loop_tbl.table_name || ' Count :'||v_count);
END IF;
v_count :=0;
END LOOP;
EXCEPTION
WHEN others THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
END;
Please remove if any syntax error.
Regards

Naming Convention and way to locate Table Names in B.I

Hello All,
I like to know information about
How to find a table
Naming convention of table
Important Tables
I will be thankful ,if anyone provide this information..

Hi Path,
I will provide information what i had got through various sources...
1) Identifying Table
The best way to find out from which tables the data source is getting updated is to search in help.sap.com by using the selection criteria "datasource and the name of the data source".
This displays a table which gives the name of the fields and the table names
2) Naming Convention
1./bic/f (cube name) is the fact table of a content cube
2./bic/D (cube name) P is the package dimension of a content cube
3./bic/D(cube name) U is the unit dimension of a content cube
4./bic/D(cube name) T is the time dimension of a content cube
5./bic/D(cube name) I is the user defined dimension of a content cube
6./bic/m (object name) master data of object
7./bic/t (object name) text data of object
8./bic/H (object name) hierarchy data of object
9./BIC/I* SID Structure of Hierarchies
10./BIC/K* Conversion of Hierarchy Nodes - SID
11./BIC/P* Master Data (Time-Ind.): Characteri
12./BIC/Q* Master Data (Time-Ind.): Characteri
13./BIC/S* Master Data IDs: InfoObject
14./BIC/T* Texts: Char.
15./BIC/X* Attribute SID Table: InfoObject
16./BIC/Y* Attribute SID Table (Time-Dep.):
17./BIC/B* Transfer structure PSA/Changelog
18./BIC/A* ODS Active records
19./BIC/F* Info cube F-Fact table
20.BIC/E* Info cube E-Fact table (compressed records)
21./BIC/D* info cube dimension tables
3) Important tables
I has collected some important tables that may help you..
authorization:
RSSTOBJDIR (Management Table for Authorization Objects): Link between specific authorization object and Info source (table used by transaction RSSM)
InfoPackage
RSLDPIO Links datasource to infopackages
RSLDPIOT InfoPackage Text Description
RSLDPRULE ABAP source code for InfoPackages
RSLDPSEL Hardcoded selections in InfoPackages
ProcessChain
RSEVENTCHAIN Event Chain Processing Event Table
RSEVENTHEAD Header for the event chain
RSEVENTHEADT Header for the event chain
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
Queries
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
Workbooks
RSRWBINDEX?
List of binary large objects (Excel workbooks)
RSRWBINDEXT?
Titles of binary objects (Excel workbooks)
RSRWBSTORE?
Storage for binary large objects (Excel workbooks)
RSRWBTEMPLATE?
Assignment of Excel workbooks as personal templates
RSRWORKBOOK?
Where-used list for reports in workbooks

How to insert variable for table name in Select statement ?

I am creating a stored procedure which will take two table names as IN parameters. Within the procedures I would like to use the parameters in the following manner;
     SELECT count(*)
     INTO v_target_cnt
     FROM TargetTable;
TargetTable is one of the parameters passed in. When I do this however it does not recognize the parameter. I have tried assigning the parameter to a local variable and using the variable, with not luck.
Any help....thanks

Null,
What you are describing is called a LEXICAL parameter, which is allowed (preceded by an ampersand) in sql but not in pl/sql because it would not be possible to compile it. That is why you need to use Andrew's suggestion to make the sql dynamic. In older versions you would need to use DBMS_SQL which is horrible and now thankfully redundant.

How can I open a PDF file and enter a word in the Find field from the command line?

Hi,
I want to use a PDF file as the help file of another program.
I have found somewhere an incomplete description of the command line parameters of Acrobat Reader.
It described how to open a file and jump to its given page.
I have written the following batch file based on that.
rem Open pdf (prm1) with Acrobat reader at given page (prm2)
"%adobe_rdr%\AcroRd32.exe" /N "zoom=73&page=%2=OpenActions" %1
The following batch file opens the search dialog:
rem Open pdf (prm1) with Acrobat reader
rem and search for something (prm2)
"%adobe_rdr%\AcroRd32.exe" /N "zoom=73&navpanes=1=OpenActions&search=%2" %1
I need the simple find field instead of the complicated search window.
Regards
Ferenc

Not possible.

Setting a proper domain name and adding hosts for quick name resolution

I have 3 other computers in my house.
Two run linux at this time.
I want to do 2 things. Right now my machine says Steve.local for its hostname right? I want to change that so it reads Steve.mydomain.net.
Am I correct that I need to
sudo /etc/hostconfig
And change the hostname line from -Automatic- to =
HOSTNAME=Steve.mydomain.net
And for quicker resolution of the small number of hosts on my network (primarily so I can use hostname instead of IP for ssh) can I add static hosts to the /etc/hosts file on my machine ala:
sudo /etc/hosts
Is this the proper way to do these things in Mac OS X?
Also to change my workgroup for Samba:
Open the Directory Access utility (under Applications -> Utilities)
I highlight SMB and click configure and just change the Workgroup entry there. Is that correct as well?
Just checking before I go tooling up my machine tonight for better integration into my home network.

Ok update changing the hostname in the field does NOT allow me to edit the .local part. In fact it converts Steve.mydomain.net.local to Steve-mydomain-net.local.
But I got my windows workgroup changed and I am showing up with the correct workgroup name from my other servers.
Also, lets say you only have a couple of computers on your home network right? So dedicated dns is kind of overkill especially when most of them are laptops rebooting all the time.
Well, your mac os x box has a hosts file. /etc/hosts as in if you want to edit sudo vi /etc/hosts. So you keep the computers pretty much in sync from those files.
I was afraid the information would not be persistent across a reboot. It was.
So, two out of three ain't bad. I read in the server forum its a pain in the ***. I was almost thinking of doing the hostconfig trick but I saw an Apple bulletin saying do NOT do that.

How to enter entries for table TVZBT

Hi,
can any one help me how to maintain payment team description in defferent languge in TVZBT table.
this table contain the following data in english
SPRAS     ZTERM       VTEXT
E              ZA20          N 30 Due from end billing
Now i have to maintain same date in french ie
F              ZA20           N 30d'f bill
how can i update.

HI,
write a small program and insert it into the table .
data : wa like TVZBT.
wa-langu = 'F'.
wa-zterm = 'ZA20'.
wa-VTEXT = '30d'f bill '
insert tvzbt from wa.
is it the case that you just want to maintain only one entry of how... if its only one time one entry then i have other way of doing it with out writing the program.. please let me know

5.2 -- GOTO SE16 and enter TSTC for TABLE NAME. TCODE FIELD /VIRSA*

Similar Messages

Maybe you are looking for