50 max values

Hi all,
I am new to LabView and have a question most of you may find simple. I am trying to collect torque signals from an isokinetic dynamometer and need to collect the 50 highest (max) values in the order in which they occur. I know how to find the maximum and minimum values, but need the highest 50. Thank you so much.

Depending on the size of your array another method you could use would be to make a copy of the array, sort it from largest to smallest and grab the 50th element of the array. Next, initialize an array of size 50. Now run your original data into a FOR and use autoindexing to iterate over your array. If the value is equal to or larger than the minimum value you determined replace the nth value of your max array. You will need to keep track of the index that you will need to replace using a shift register. You can stop the loop once you have processed your entire array or you find the first 50 maximum values. This seems a bit complicated but you did say that you wanted your max array to maintain the order of the values from your original data. I am not sure that Ravens approach would do that for you.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Similar Messages

How to pick max value from a column of a table using cursor and iteration

Hello Everybody
I have a table loan_detail
and a column in it loan_amount
now i want to pick values from this table using cursor and then by using iteration i want to pick max value from it using that cursor
here is my table
LOAN_AMOUNT
100
200
300
400
500
5600
700i was able to do it using simple loop concepts but when i was trying to do this by using cursor i was not able to do it .
Regards
Peeyush

SQL> SELECT MAX(sal) Highest_Sal,MIN(sal) Lowest_Sal FROM emp;
HIGHEST_SAL LOWEST_SAL
       5000        800
SQL> set serverout on
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := counter;
10      counter := counter + 1;
11    END LOOP;
12    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
13    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
14 END;
15 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Even smaller
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := 1;
10    END LOOP;
11    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
12    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
13 END;
14 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Edited by: Saubhik on Jan 5, 2011 4:41 PM

Min and MAx Value in a SELECT Statement

Hi,
I have a scenario where I am Selecting the values BETWEEN MIN and MAX values:
SELECT * FROM ABC WHERE CODE BETWEEN MIN(CODE) AND MAX(CODE)
ITS GETTING Error as:ORA-00934: group function is not allowed here
Any help will be needful for me.

select substr(no,1,3)||to_char(substr(no,4,1)+1) "first missing number"
from
with t as
(select 'ABC1' no from dual
union select 'ABC2' from dual
union select 'ABC3' from dual
union select 'ABC5' from dual
union select 'ABC6' from dual
union select 'ABC8' from dual
select no, lead(no,1,0) over (order by no) next_no from t
where substr(next_no,4,1) - substr(no,4,1) > 1
and rownum = 1;

Find Index for max value of array

I can use arrayMax to get the max value for a small array, but I need to get which index the max value is located. That will determine which page the user goes to next. Here is my code:
array:
<cfset arrAverages[1]="#qryFairness.fairness#"/>
<cfset arrAverages[2]="#qryHonesty.honesty#"/>
<cfset arrAverages[3]="#qryCompassion.compassion#"/>
<cfset arrAverages[4]="#qrySelfControl.SelfControl#"/>
<cfset arrAverages[5]="#qryMoralConcern.MoralConcern#"/>
These values are gathered from querying values stored in a table.
I can get the max value in the array easily by:
<cfdump var="#arrayMax(arrAverages)#">
What I can't figure out is how to get the row in this array where that max value is located. It seems like it would be so simple, but nothing I have tried has worked.
Thanks,
Richard

rking1966 wrote:
I can use arrayMax to get the max value for a small array, but I need to get which index the max value is located. That will determine which page the user goes to next. Here is my code:
array:
<cfset arrAverages[1]="#qryFairness.fairness#"/>
<cfset arrAverages[2]="#qryHonesty.honesty#"/>
<cfset arrAverages[3]="#qryCompassion.compassion#"/>
<cfset arrAverages[4]="#qrySelfControl.SelfControl#"/>
<cfset arrAverages[5]="#qryMoralConcern.MoralConcern#"/>
These values are gathered from querying values stored in a table.
I can get the max value in the array easily by:
<cfdump var="#arrayMax(arrAverages)#">
What I can't figure out is how to get the row in this array where that max value is located. It seems like it would be so simple, but nothing I have tried has worked.
You can find it in one line of code! Here is an example:
<cfset testArr[1]=-183>
<cfset testArr[2]=79>
<cfset testArr[3]=6>
Max.: <cfoutput>#arraymax(testArr)#</cfoutput><br>
Index of max.: <cfoutput>#arrayfindNocase(testArr, arraymax(testArr))#</cfoutput>

Need to sum max values in a report with Hidden groupings

I have looked all over and have not found my exact situation, so I am posting my first question. I have a report that I have grouped on multiple levels. So my report has a customer/header/detail/release grouping. I have written a custom
expression so that only a single value, which is the max value in the group, is shown in the detail, with all values showing in the release. I have then set my visibility toggle to toggle on header, then detail, then release and I need to sum up those
max values into a field on the report. The custom expression that I have written works correctly when you are showing on the detail level. It gives the correct value, which is the max value in each release.
What I then need the report to do is to sum only that max value and roll that up into the header group, so that I get a total of the max values.
I have tried using the MAX function in my expression to get the correct max value, but I cannot get SSRS 2008 R2 to sum that, and I have tried writing a custom expression that will calculate the max (Non-zero values divided by number of non-zero records) and
both ways work correctly until I try to rollup and sum to the next group level.
I have also tried using a group variable and custom code to get the value and save it to a variable, but I have not had any luck in setting or getting that value correctly back to my report.
At its most basic it feels like I should be able to set a Sum(Max(Fields!ValueColumn.Value) and let SSRS handle how that should be broken out, but after trying that repeatedly I have still had no luck. I cannot adjust the SQL as I need the level of detail
that the report shows, although I could add more fields as long as I don't add any groupings or totals that would reduce the granularity of that data being returned.
Any new avenue to explore would be very helpful.
Thank you in advance,
Chad

Ok, after continuing to search the internet I finally found the extra piece that I was missing that gave me the results I needed. The new expression looks like this:
=runningvalue(Sum(Max(IIF(LEFT(Fields!JobNum.Value,1)="S" AND Fields!Week1STol.Value<>0, CDBL(Fields!Week1STol.Value), 0),"JobItem"),"JobItem"),SUM, "JobItem")
In this I wrapped the original expression of Max in both a Sum and a runningvalue both at the JobItem level to get this rollup value. Now when I open the grouping I get the correct running value at each level.
What this really gives to me is a running total at each of four groupings, even with a "max" value at the detail level. This also allows me to total a max value inline on the report, without needing a hidden row, or report footer.
Thank you to everyone who looked at this, I hope it helps someone else. If this answer is not clear enough, please don't hesitate to add to the comments and I will try to clarify.
Thank you, Chad

How to get max value of a column in VO?

Hi ,
i need to find the max value of a column named insured value in VO.
Please help!!

Hi,
If this value is cuming from the Query then u can easily go for MAX function. If its a user enterable value then u need to iterate through all the rows for that column to find the max of them.
Let me know.
Regards,
Gyan

How to retrieve the max value from a cursor in procedure

Hi,
In a procedure, I defined a cursor:
cursor c_emp is select empno, ename, salary from emp where ename like 'J%';
but in the body part, I need to retrieve the max(salary) from the cursor.
could you please tell me how I can get the max value from the cursor in the procedure.
Thanks,
Paul

Here is one sample but you should just get the max directly. Using bulk processing should be a last resort.
DECLARE
CURSOR c1 IS (SELECT * FROM emp where sal is not null);
TYPE typ_tbl IS TABLE OF c1%rowtype;
v typ_tbl;
max_sal number;
BEGIN
OPEN c1;
max_sal := -9999999999999;
LOOP                                                 --Loop added
    FETCH c1 BULK COLLECT INTO v LIMIT 3; -- process 3 records at a time
        -- process the records
       DBMS_OUTPUT.PUT_LINE('Processing ' || v.COUNT || ' records.');
        FOR i IN v.first..v.last LOOP
             if v(i).sal > max_sal then
               max_sal := v(i).sal;
             end if;
            DBMS_OUTPUT.PUT_LINE(v(i).empno);
        END LOOP;
    EXIT WHEN c1%NOTFOUND;
END LOOP;
DBMS_OUTPUT.PUT_LINE('Max salary was: ' || max_sal);
END;
Processing 3 records.
7369
7499
7521
Processing 3 records.
7566
7654
7698
Processing 3 records.
7782
7788
7839
Processing 3 records.
7844
7876
7900
Processing 2 records.
7902
7934
Max salary was: 5000

Query help needed in finding max value between two columns

I have a table as follows:
-- INSERTING into TESTTABLE
Insert into TESTTABLE (COLA,COL2,COLC,COLD,COLE,COLF) values ('A','4.5','AA',0.3,'AB',5.5);
Insert into TESTTABLE (COLA,COL2,COLC,COLD,COLE,COLF) values ('B','1','BB',2.5,'BC',6.9);
Insert into TESTTABLE (COLA,COL2,COLC,COLD,COLE,COLF) values ('C','2.6','CC',3.3,'CD',1.4);
Insert into TESTTABLE (COLA,COL2,COLC,COLD,COLE,COLF) values ('D','1.8','DD',2.9,'DE',1.2);
Insert into TESTTABLE (COLA,COL2,COLC,COLD,COLE,COLF) values ('E','6.8','EE',4.8,'EF',9.6);
Insert into TESTTABLE (COLA,COL2,COLC,COLD,COLE,COLF) values ('F','2.0','FF',6.34,'FG',3.9);
Insert into TESTTABLE (COLA,COL2,COLC,COLD,COLE,COLF) values ('G','1.7','GG',3.6,'GH',5.8);
I want to get results as follows:
COLA COL2 MaxCol MaxColVal
A 4.5 AB 5.5
B 1 BC 6.9
C 2.6 CC 3.3
D 1.8 DD 2.9
E 6.8 EF 9.6
F 2.0 FF 6.34
G 1.7 GH 5.8I want to get the max value of either of the columns COLD or COLF.. Whichever column has got max value, then the corresponding value of COLC and COLE should be returned..
For eg., in first row, COLF has higher value than COLD.. ie., COLF = 5.5 > COLD = 0.3, so for row1, i want the result as MaxCol is AB and MaxColvalue is 5.5..
Similarly for third row, COLD =3.3 > COLF=1.4, so for 3rd row, i want the result as MaxCol is CC and MaxColvalue is 3.3
How is it possible to do this in a qery? Any help.. please..

SQL> select cola
2       , col2
3       , case greatest(cold,colf)
4         when cold then colc
5         else cole
6         end maxcol
7       , greatest(cold,colf) maxcolval
8    from testtable
9 /
C COL MA MAXCOLVAL
A 4.5 AB        5,5
B 1   BC        6,9
C 2.6 CC        3,3
D 1.8 DD        2,9
E 6.8 EF        9,6
F 2.0 FF       6,34
G 1.7 GH        5,8
7 rijen zijn geselecteerd.Regards,
Rob.

How to get the max value of a set of percentage values?

Hi,
I've tried to get the max and min value of a set of calculated percentage values. Such as
Jan Feb March Apr May Jun Min Average Max
0,5 0,8 1,1 0,4 1 0,6 0,4 0,7 1,1
The average value works fine. But with "min" and "max" I have a problem.
I've tried to get the value with the following ways:
- Create a new calc. keyfigure and make a sum of all values: (Jan + Feb + ...) and set the calculation in key figure properties to Min/Max.
- Create a new calc. keyfigure and make a sum of all values and set the aggregation to Min/Max
- Create a selected keyfigure with a filter to the necessary periods and set a calculation to Min (Aggregation is not possible here)
- Create a new cal. keyfigure with all periods and the function Min. e.g. min(Jan, (min Feb, (min (....)
None of this solutions provides the right min and max value. When I use an amount value (e.g. Euro) instead of these percentage values the keyfigure with the min and max function works. The others all provide wrong values.
Is there a solution to get the right min and max value???
It would be a great help when you have any hints.
Thanks
Claudia

Hi Aduri,
thanks for your answer but your solution doesn't work.
The problem is that the periods are defined in a structure with offsets such as
- period-11
- period-10
- period
in this structure elements there is also the keyfigure "netvalue" defined.
In the rows of the report there is another characteristic such as company code.
Is there a solution to find the max and min values of the period values for each company code? Or must I change the data model e.g. copy the keyfigure and make a new keyfigure with another aggregation level?
Thanks for any hints!
Claudia

Need sum on all coulumns except for one coulumn needs max value

Hi Gurus,
I have a requirement like:
Say I have 3 columns like C1,c2,c3.
On day1 the record values are 100,150,200
On day2 the record values are 100,150,300
End result ..for column C1 and C 2 I should get sum of them
so the result for C1 as per the above values: 200
c2=300
But for C3 column, I should get only maximum value..like 300 (not sum)...
Using case statement by setting a flag on max report date.. we can do this ..Is there any other that this can be achieved. (In ETL or RPD or Front end)
Thanks.

For C3 column instead of showing all values like 200, 300 just show max value only so that you can get output as below and when you sum the value remain 300. Try it out. It can be in rpd or in the report.
On day1 the record values are 100,150,300
On day2 the record values are 100,150,300
mark if make sense
Thanks

SSAS Tabular DAX- Need to get MAX value of the MIN (top)hierarchy level row

EDIT:
I got closer to resolving the issue using MAX.
However, If I remove the department hierarchy and just place on the MAX measure I get the single largest value out of all departments.
It would be ideal if the measure could still SUM the "top level" values across everything in the system if the hierarchy is not placed on the rows grouping.
So it returns the largest value for a given department, but if the department hierarchy isn't present I need it to return a SUM of all the level 1 values for all departments...
Basically return MAX value from the MIN L1ID's DeptLevel value, but I can't seem to construct that DAX query. So if DepartmentID hierarchy is on display it gets MAX per row, but if that is removed it dips into MAX GoalValue for each L1ID grouping with
the MIN DeptLevel.
/EDIT
I have a rather odd data table I'm bringing into a SSAS Tabular model.
Instead of having all data at each child level and then it adding up to a grand total in the parent, it has a grand total predefined at each child level.
I just need this tool to display the raw data if at all possible instead of trying to aggregate everything. Filter on active level, ignore child levels.
Is there a way to do that?
Example:
SalesGoalsByDepartmentLevel:
Level1 (top level) = 5,000
Level2( lower level) = 0
Level3(lower still) = 500
Level 4(lowest) = 4,250
So note that adding up all the child levels is still $250 shy of the top 5,000.
IT is just an odd business rule, basically each level is expected to meet that goal or exceed it, the top level goal is 5,000 but management doesn't care where that last 250 comes from, they do are that each defined level is met.
These levels are in a hierarchy so if I view the top level of the hierarchy it adds up to 4250+500+5000=9750 when I just want to see 5,000 at the top level and the details when they drill down.
I added a filter to just filter to the top level, but then when I drill down of course those lower levels are blank.
Is there a way to filter on the current displayed level without aggregating all child levels?
Thanks!

You might want to take a look at the Parent-Child Hierarchies pattern here:
http://www.daxpatterns.com/parent-child-hierarchies/
You might write DAX code to check what is the "current" level (see BrowseDepth measure in the sample file you can download) and depending on its level, se the filter to blank to all the levels below, so you don't aggregate "children".
Just an idea, I'm not sure if it corresponds to your requirement and I don't have time to make more tests.
I hope it will be helpful.
Marco Russo (Blog,
Twitter,
LinkedIn) - sqlbi.com:
Articles, Videos,
Tools, Consultancy,
Training
Format with DAX Formatter and design with
DAX Patterns. Learn
Power Pivot and SSAS Tabular.

Range Partitioning a table. Max value to be defined

Hi,
I am using a range partitioned table, range partitioned on date, and have defined max value as 6 months after the Creation Date.
I have a proc which creates the partitions I want in advance by splitting up the max partition.
- Now what do I do when max partition is reached after 6 months?
- If I define max partition one year or two year after the current date instead of the currently defined 6 months after creation date. What are the negatives attached with it?
I can't use Interval Partition and have to use Range only.
Kindly suggest.
Thanks..

>
I am using a range partitioned table, range partitioned on date, and have defined max value as 6 months after the Creation Date.
I have a proc which creates the partitions I want in advance by splitting up the max partition.
- Now what do I do when max partition is reached after 6 months?
- If I define max partition one year or two year after the current date instead of the currently defined 6 months after creation date. What are the negatives attached with it?
>
Any data with a partition key that does NOT match any partition will cause your INSERT query to fail.
Any partition that has no data to match it will simply remain empty.
A common partitioning scheme is to define one partition for all old data, one partition with a high max value and then split the max value partition to get the partitions you want in the middle.
Let's say you want monthly partitions but don't have that much data from before the current year, 2012.
1. Create one partition for dates < 1/1/2012
2. One partition each for the 12 months of 2012
3. One max value partition to be 1/1/4000
You would just split the max value partition to create each month of 2013. The split could be done ahead of time or a month at a time as you choose.
The only negative is that any data inserted by mistake that has a super-high date will go into the max value partition. But that is going to happen anyway. If you accidentally enter a date of 3/23/3882 it won't be rejected.
But it is easy to query periodically to see if you have any 'bad' data like that. And the alternative is that an INSERT would fail because of the one bad record and all of your good data would be rejected anyway so it's not really much of a negative.
Remember - for best management performance each partition should have its own tablespace and the indexes should all be local if possible.

Query to print the max value of time of the latest record from table

hi
i wrote this query
which should return max fx_time of the latest or current value of fx_date
plz help
this wuery is giving current date fx_date but with all values not the max value of fx_time.
select FX_DATE, FX_TIME,FROM_CURRENCY, TO_CURRENCY, ASK_RATE, BID_RATE,
time_stamp, source,
DESCRIPTION, FX_TYPE, OVERRIDDEN_RATE, OVERRIDDEN_BY, OVERRIDDEN_DATE ,
ASK_RATE_INVERSE, BID_RATE_INVERSE, PX_LAST, PX_MID, PX_OPEN, PX_HIGH,
PX_LOW,NY_TIME_OF_LAST_PRICE_UPDATE,
DATE_OF_LAST_UPDATE, PX_BID_AM, PX_ASK_AM, PX_BID_PM, PX_ASK_PM, PX_CLOSE_1D,
CHG_NET_1D,
CHG_PCT_1D, PRICING_SOURCE, PX_BID_1M, PX_ASK_1M, PX_BID_1YR, PX_ASK_1YR,
PX_CLOSE_MTD,
PX_CLOSE_YTD, FXOPT_COMMODITY_CCY, FXOPT_SPOT_FXRATE, SPOT_RT_USD_FLAG,
PRIOR_CLOSE_BID,
PRIOR_CLOSE_MID, PRIOR_CLOSE_ASK from CURRENCY_EXCHANGE_TXN
WHERE
source='BLOOMBERG'
AND FX_DATE=
(select max(fx_date) JIM from CURRENCY_EXCHANGE_TXN
,(select max(fx_time) TIM from CURRENCY_EXCHANGE_TXN GROUP BY FX_TIME )
what change should i do

Hi,
Try this:
select FX_DATE, FX_TIME,FROM_CURRENCY, TO_CURRENCY, ASK_RATE, BID_RATE,
time_stamp, source,
DESCRIPTION, FX_TYPE, OVERRIDDEN_RATE, OVERRIDDEN_BY, OVERRIDDEN_DATE ,
ASK_RATE_INVERSE, BID_RATE_INVERSE, PX_LAST, PX_MID, PX_OPEN, PX_HIGH,
PX_LOW,NY_TIME_OF_LAST_PRICE_UPDATE,
DATE_OF_LAST_UPDATE, PX_BID_AM, PX_ASK_AM, PX_BID_PM, PX_ASK_PM, PX_CLOSE_1D,
CHG_NET_1D,
CHG_PCT_1D, PRICING_SOURCE, PX_BID_1M, PX_ASK_1M, PX_BID_1YR, PX_ASK_1YR,
PX_CLOSE_MTD,
PX_CLOSE_YTD, FXOPT_COMMODITY_CCY, FXOPT_SPOT_FXRATE, SPOT_RT_USD_FLAG,
PRIOR_CLOSE_BID,
PRIOR_CLOSE_MID, PRIOR_CLOSE_ASK from CURRENCY_EXCHANGE_TXN
WHERE
source='BLOOMBERG'
AND FX_DATE=
(select max(fx_date) JIM from CURRENCY_EXCHANGE_TXN
FX_TIME )
[PRE]
Please always use [ PRE ] and [ / PRE ] tags when ever posting any code.
Regards

How to take max value for this senario

Hi,
i have table xyz in which i have column display_code
for eg.
display_code in table like
1. '1100000-999'
2. '1100000-1000'
3. '1100000-1001'
now i have to take max value among 3 display code. my requirement when i take max it will give me '1100000-1001' or the next value
select max(display_code) from xyz table;
max(display_code)
'1100000-999'
Please help me to fetch max(display_code) = '1100000-1001'
thanks & regard
shyam~

SQL> with xyz as (
2 select '1100000-999' display_code from dual union
3 select '1100000-1000' from dual union
4 select '1100000-1001' from dual
5 )
6 --
7 -- actual query:
8 --
9 select display_code
10 from   xyz
11 where to_number(substr(display_code, instr(display_code, '-')+1)) = ( select max(to_number(substr(display_code, instr(display_code, '-')+1)))
12                                                                          from   xyz
13                                                                        );
DISPLAY_CODE
1100000-1001or
SQL> with xyz as (
2 select '1100000-999' display_code from dual union
3 select '1100000-1000' from dual union
4 select '1100000-1001' from dual
5 )
6 --
7 -- actual query
8 --
9 select display_code
10 from   xyz
11 where to_number(replace(display_code, '-')) = ( select max(to_number(replace(display_code, '-')))
12                                                                          from   xyz
13                                                                        );
DISPLAY_CODE
1100000-1001Edited by: hoek on Sep 7, 2010 5:20 PM

Max value without using max() function

Hi
Is there any way to get the max value from a table without using MAX() function
Thanks

well if you think about it i'm sure you'll find a solution
what does max(field) means, it simply is the value of the field where no other value of the same field that is > than this value exists.
consider the following :
table TAB(
fld NUMBER(5));
translate the logic and you'll have
select a.fld from TAB a where NOT EXISTS(select b.fld from TAB b where b.fld>a.fld) and rownum=1;
of course there are better ways i'm sure, you'll just have to figure'em out.

Max value is same in report

Hi Sap Experts
I am not getting same min value from max can anyone correct my program please
I am getting max value but in place of min I am getting the same value of max.
I am searching with equipment range , monthly date range and unit of measurment (km,L,H)
REPORT Z_ESLP_FUEL LINE-SIZE 200 LINE-COUNT 75
NO STANDARD PAGE HEADING.
TABLES : equi,
equz,
imptt,
imrg,
eqkt,
iloa.
Type Declaration
TYPES: BEGIN OF ty_data ,
        equnr type equnr, " Euipment no
        eqktx type eqkt-eqktx, " Equipment Text
        eqfnr type iloa-eqfnr, " Equipment Sort field
        idate type imrg-idate, " Measuring Date
        recdu type imrg-recdu, " Unit of measuring ='KM','L','H'
        recdv type imrg-recdv, " Counter reading data
      END OF ty_data.
TYPES: BEGIN OF ty_final,
        equnr type equnr, " Equipment no
        eqktx type eqkt-eqktx, " Equipment Text
        eqfnr type iloa-eqfnr, " Equipment Sort field
        min_date type imrg-idate, " Min Date
        min_km type p decimals 2, " Max Km
        max_km type p decimals 2, " Min km
        t_max_min_km type i, " Total min_km-max_km
        max_date type imrg-idate, " Max Date
        min_hr type imrg-recdv, " Max hr
        max_hr type imrg-recdv, " Min hr
        t_max_min_hr type i, " Total min_hr-max_hr
        min_lit type imrg-recdv, " Max lit
        max_lit type imrg-recdv, " Min lit
        t_max_min_lit type i, " Total min_lit-max_lit
        fuel_con type p decimals 2, " Total_hrs / t_max_min_hr
        km_l type p decimals 2, " km / L
        lit_per_hr type i , " fuel comsumed / t_max_min_hr
      END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
      wa_data TYPE ty_data, " work area
      i_final TYPE TABLE OF ty_final, " internal table
      wa_final TYPE ty_final. " work area
data: begin of itab occurs 0,
num type i,
end of itab.
data: v_min_1 type i,
v_max_1 type i,
min like imrg-recdv,
max like imrg-recdv,
max_dt like imrg-idate,
min_dt like imrg-idate,
t_ma_mi type p decimals 2,
V1 LIKE IMRG-RECDV ,
V2 LIKE IMRG-RECDV .
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr ,"no-extension no intervals,
p_idate FOR imrg-idate, "NO-EXTENSION NO INTERVALS OBLIGATORY,
p_recdu FOR imrg-recdu. "NO-EXTENSION NO INTERVALS default 'M3'" OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/1(40) ' INVESTMENT LIMITED '.
WRITE:/50(40) ' FUEL CONSUMPTION REPORT ' CENTERED ,
2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Date From :'.
write: /2 'Equipment No :'.
write: /2 'Unit :'.
SKIP.
ULINE.
WRITE:/1 sy-vline,
2 'EQUIP NO', 10 sy-vline,
11 'NAME', 40 sy-vline,
41 'min date', 50 sy-vline,
51 'max date', 60 sy-vline,
61 'min km', 70 sy-vline,
71 'max km' , 80 sy-vline,
81 't_max_min_km', 90 sy-vline,
91 'min hr', 100 sy-vline,
101 'max hr', 110 sy-vline,
111 't_max_min_hr' , 120 sy-vline,
121 'min lit', 130 sy-vline,
131 'max lit', 140 sy-vline,
141 't_max_min_lit', 150 sy-vline,
151 'fuel con', 160 sy-vline,
161 'km_l', 170 sy-vline,
171 'lit_per_hr', 180 sy-vline.
FORMAT COLOR 3 ON.
ULINE.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu in p_recdu.
    LOOP at i_data into wa_data.
         SORT i_data BY equnr idate descending .
         "Read table i_data into wa_data index 1.
           move wa_data-recdv to max.
         SORT i_data BY equnr idate ASCENDING .
        "Read table i_data into wa_data index 1.
           move wa_data-recdv to min.
     on change of wa_data-equnr.
     write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,wa_data-recdu ,
     'MIN',max EXPONENT 0 DECIMALS 2,
     'MAX',min EXPONENT 0 DECIMALS 2. .
     endon.
    endloop.
    loop at i_data into wa_data.
    SORT i_data BY equnr idate descending .
    move wa_data-recdv to max.
    endloop.
    loop at i_data into wa_data.
    SORT i_data BY equnr idate ascending .
    move wa_data-recdv to min.
    endloop.
regards
Piroz

Hi Experts
I got the result but it is dividing in two lines one for max and another for min but I want the sub total subtraction after each max and min
max   192300.00
min    182139.00
========================
max-min = 10161.00
========================
max   649209.00
min    642962.00
========================
max-min = 6247.00
========================
     SORT i_data BY equnr idate descending .
loop at i_data into wa_data.
        max = wa_data-recdv.
        min = wa_data-recdv.
at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'max',max EXPONENT 0 DECIMALS 2,wa_data-recdu .
        endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'min', min EXPONENT 0 DECIMALS 2, wa_data-recdu .
on change of wa_data-equnr.
t_ma_mi = max - min.
write:/ t_ma_mi.
endon.
endat.
at end of equnr.
SUM.
write:/ '----
endat.
endloop.
regards
Piroz

50 max values

Similar Messages

Maybe you are looking for