500 server error

I am getting the following error on clicking this link (after a long wait)
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=258338944
500 Server Error
The following error occurred: [code=RESOURCE_RECLAIMED] Internal error. Try again.
Could not open error file
The feed validates at feedburner.com and opens here http://feeds.feedburner.com/branded
The podcast has already been approved and is accessible through manual adding in iTunes.
What is causing this?!

Since the graphics are "edge cached" it usually takes a couple of days for iTunes to grab the new podcast image and for it to propagate through the various servers that make up the iTunes network.
It caches these graphics and will not update it again unless it sees that the filename has changed....so it's a good thing that you have renamed the file as well.
Erik

Similar Messages

  • 500 Server Error when Trying to Download Files

    Hi,
    I keep getting a 500 server error when trying to download any of the Oracle ORION files: http://www.oracle.com/technology/software/tech/orion/index.html Any ideas? Thank you for your help.
    PS. Here's the exact error:
    "Server Error
    The following error occurred:
    [code=SERVER_RESPONSE_RESET] The server response could not be read because of an error. Contact your system administrator.
    Please contact the administrator."

    Thanks. It seems to be fixed now.

  • Why do I keep getting this 500: Server Error [20-0004] when trying to access Bell mobility?

    When trying to access Bell Mobility account I get 500: Server Error [20-0004].  Is this a problem with my mac or their server?

    Have you tried on another device?
    The folow sugests it is a server issue (not your computer)( but give several actions to confirm that.
    http://pcsupport.about.com/od/findbyerrormessage/a/500servererror.htm

  • 500 Server Error after installing MSS

    We are getting 500 server error message when click on a specific MSS role after installing MSS on top of existing portal. What could be the issue? Any pointers on where to look?

    Please see:
    R12: Clone fails with error "ORA-28000 The account is locked" (Doc ID 1114244.1)
    APPS User Account Is Locked While Applying a Patch. Patch Fails With "ORA-28000" (Doc ID 420001.1)
    Thanks,
    Hussein

  • HTTP GET Failure 500 = Server Error

    Can HTTP GET all kinds of files from a SunOne server, ascii and binary, large and small, but always get failure 500 = Server Error when attempting to HTTP GET an EXE file. Absolutely positively can download binary image files (C4) that are significantly larger than some EXE files, so size is not the issue. What might trigger this error? Thanks.

    Hi,
    Pls don't forget to reward points and close the question if you find the answers useful.
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • HTTP 500 Server Error

    How do fix a HTTP 500 Server Error. I am trying the web site Ecklers Cporvette. I get a message saying page can be displayed internal server error.

    Hi,
    Please review this information.  The issue is on the server side and not the client side.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • OIF -- 500 Server Error when trying to import SAML 2.0 metadata

    Hi,
    We have setup OIF version 10.1.4.0.1 on Windows 2003 server with integration to OAM running on the same machine. We need to configure this server as a SAML 2.0 IdP.
    When we try to import a SAML 2.0 SP metadata by navigating as Circle of Trust -> Add Trusted Provider, the browser shows a 500 Server error with the following URL -
    http://fedserver208.orclidp.com:7777/fed/admin/servlet/loadmetadata
    Can someone please point us to the location of log file(s) where we can check for errors? Thanks much for your response.
    Vijay

    Vinod,
    Thanks for the follow-up on this thread. It turned out that the metadata from the SP wasn't conformant to the spec, so we had to hand-craft the metadata file to allow OIF to import it.
    Vijay

  • 500 "Server error" when use User Management Console

    Hello All, i'm staring with Hyperion products on this week))
    I installed Shared Serveces and Essbase – System 9
    I deployed Shared Serveces on OAS 10.1.3.1
    And now when I use User Management Console and try to open
    node 'Projects' I get an error 500 "Server error".
    Why ?
    Please help me resolve this issue
    What's wrong? May be I have to install additional components to use Projects?

    I found follow error in my OC4J where deployed "User Management Console"
    log file located in $OAS_ORACLE_HOME/j2ee/Hyperion/application-deployments/SharedServices9/Hyperion_default_group_1/application.log
    07/11/16 10:57:16.633 interop: Error preloading servlet
    javax.servlet.ServletException: Error instantiating servlet 'integration'. Servlet class com.hyperion.interop.webservices.integration.IntegrationWebservice not found in web-application interop
         at com.evermind.server.http.HttpApplication.servletClassNotFound(HttpApplication.java:4866)
         at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4832)
         at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4734)
         at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4922)
         at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1134)
         at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:738)
         at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
         at com.evermind.server.Application.getHttpApplication(Application.java:545)
         at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990)
         at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1909)
         at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:645)
         at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
         at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
         at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
         at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2450)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:998)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
         at java.lang.Thread.run(Thread.java:595)
    07/11/16 10:57:17.334 interop: Error preloading servlet
    javax.servlet.ServletException: Cannot initialize Hyperion DSF. Error:
         Missing class: org.apache.xerces.jaxp.DocumentBuilderFactoryImpl
         Dependent class: com.hyperion.workflow.engine.server.services.modelrepository.WfProductSchemaParser
         Loader: SharedServices9.web.interop:0.0.0
         Code-Source: /u0/SOA/SOA_Suite/j2ee/Hyperion/applications/SharedServices9/interop/WEB-INF/lib/wf_eng_server.jar
         Configuration: WEB-INF/lib/ directory in /u0/SOA/SOA_Suite/j2ee/Hyperion/applications/SharedServices9/interop/WEB-INF/lib
    The missing class is not available from any code-source or loader in the system.
         at com.hyperion.dsf.server.framework.DsfServer.init(DsfServer.java:52)
         at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2361)
         at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4810)
         at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4734)
         at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4922)
         at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1134)
         at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:738)
         at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
         at com.evermind.server.Application.getHttpApplication(Application.java:545)
         at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990)
         at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1909)
         at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:645)
         at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
         at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
         at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
         at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2450)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:998)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
         at java.lang.Thread.run(Thread.java:595)
    07/11/16 10:57:17.482 interop: 10.1.3.1.0 Started

  • Authenticate user - HTTP/1.1 500 Server Error

    When using Authenticate User behavior I get HTTP/1.1 500
    Server Error. Only on remote server, not localhost. The host first
    tried to tell me it was because I was using Access, that my db
    wasn't working, but I showed them that it did work on pages without
    the behavior. I feel like I'm getting the runaround. Anyone else
    have this problem? Any ideas on how to help would be greatly
    appreciated.
    Thanks.
    Sally

    I just realized that when the login page is submitted, not
    only is the page not going to the "if succeeds" page, the directory
    name the domain name points to appears after the domain name- i.e.
    http://mydomain.com/mydomain/Residents_LogIn2.asp.
    This is the URL that is giving the 500 error. The page is not going
    to
    http://mydomain.com/directory2.asp.
    On my local server it goes to
    http://localhost/mydomain/directory2.asp
    I can't see anything in the code that would cause this, but I
    will attach it. I don't know if this makes a difference, but the
    hosting site allows multiple domains to be hosted on your server
    space, you just point what directory you want your domain to point
    to on your server. So
    http://mydomain.com points to the
    "mydomain" directory. But the file is submitting to
    htdocs/mydomain/mydomain/Residents_LogIn2.asp All the other pages -
    including the dynamic ones updating and inserting records - work
    fine. It's just the one with the Log In User behavior.
    I would appreciate ANY suggestions as I am totally stuck.

  • HTTP/1.1 500 Server Error

    Can anyone point me in the right direction on things to
    check....
    Nothing has been done to this server.
    None of the pages work... except for a few HTML pages the
    rest are ASP.
    ASP/ Cold Fusion / DW8 / VB

    That error is the error received on the page..
    I already have the friendly errors turned off...
    All pages are ASP
    Server is 2003 has been working for sometime and now get the
    error on any
    ASP page
    I mentioned ASP and Cold Fusion cause part of the site is
    setup in Cold
    Fusion..
    I checked and ASP is allowed within IIS
    I stopped and started IIS yesterday and still nothing
    With Friendly Errors Turned On:
    There is a problem with the page you are trying to reach and
    it cannot be
    displayed.
    Please try the following:
    Open the web3.gardenridge.com home page, and then look for
    links to the
    information you want.
    Click the Refresh button, or try again later.
    Click Search to look for information on the Internet.
    You can also see a list of related sites.
    HTTP 500 - Internal server error
    Internet Explorer
    With Friendly Errors Turned Off:
    HTTP/1.1 500 Server Error
    Any and all(well the few html) show up fine no problems.
    "Nancy - Adobe Comm. Expert" <[email protected]> wrote
    in message
    news:[email protected]...
    > Do you get errors? If so, what are they? Go to your
    browser under
    > Tools/Internet Options/Advanced and find the one that
    says "Show friendly
    > errors" and uncheck that box. Close and reopen the
    browser and rebrowse
    > to the page. What is the error now?
    >
    > Do the pages try to download? If so and the pages are
    .asp, then ASP
    > isn't working on the server. Find out what kind of
    server.
    >
    > Why do you put ASP/Cold Fusion? They are both server
    models and they are
    > mutually exclusive. You said
    >
    >
    > --
    > Nancy Gill
    > Adobe Community Expert
    > Author: Dreamweaver 8 e-book for the DMX Zone
    > Co-Author: Dreamweaver MX: Instant Troubleshooter
    (August, 2003)
    > Technical Editor: Dreamweaver CS3: The Missing Manual,
    > DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    > Mastering Macromedia Contribute
    > Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced
    PHP Web
    > Development
    >
    > "Daniel" <[email protected]> wrote in message
    > news:[email protected]...
    >> Can anyone point me in the right direction on things
    to check....
    >>
    >> Nothing has been done to this server.
    >> None of the pages work... except for a few HTML
    pages the rest are ASP.
    >>
    >>
    >>
    >> ASP/ Cold Fusion / DW8 / VB
    >>
    >
    >

  • WRT1900AC returns 500 server error

    Went to do some changes on the router setup today, but are only met with a 500 server error message. Both wired and wireless seems to work still, it's just the web UI that has crashed. Anyone else experienced this?
    I'll try a power cycle when I get home, that will probably solve the issue.
    Keep calm and factory-reset that router.

    I was connected local though ethernet. A power cycle of the router solved the issue. Not very impressed with this router yet. Still have the option to return it and I'm starting to think about it.
    Keep calm and factory-reset that router.

  • 500 Server Error when executing Query in Portal

    When I run a query in the ABAP Web all the components (the pulldowns) work as well as the query executes.
    When I run the query in the Java WebI get a 500 Internal Server Error
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    ABEND BRAIN (299): System error in program BICS_PROV_GET_INITIAL_STATE and form Variables are not submitted (see long text)
      MSGV1: BICS_PROV_GET_INITIAL_STATE
      MSGV2: Variables are not submitted
    We are using Netweaver 7.0 sp 13.
    Any help is appreciated.... Point rewarded !!!
    Mike

    Yes I get that and it has been installed and everythign is worked awesomly. I can export queries to the portal. SSO, SSL and the whole bit it installed.
    The nwa default trace tool doesn't give me much to go on. Err looks like i described it above however it says its in
    Category: /Applications/BI
    Location: com.sap.ip.bi.base.application.message.impl.MessageBase
    Application: sap.com/irj
    The other err is in
    Category: /Applications/BI/Application_Framework
    Any ideas of where I should look?

  • Customize the 404 and 500 server error pages

    how can I customize the 404 (http 404 error) and 500
    (internal server error) server error pages?
    Where are the corresponding pages?
    thanks for your help
    Celestino

    Theoretically, quite easily:
    The default error pages can be overriden by any html/jsp/servlet resource. You have
    only to map the error codes with your own error pages within the Deployment Descriptor
    file (web.xml).
    See the documentation for details.
    HTH
    Ales
    "Celestino" <[email protected]> wrote:
    >
    how can I customize the 404 (http 404 error) and 500
    (internal server error) server error pages?
    Where are the corresponding pages?
    thanks for your help
    Celestino

  • AXL getPhone 500 Server Error - until "Save"

    Using Cisco Call Manager 8.5
    We have a homegrown AXL solution that provisions phones via addPhone, and is doing so successfully. However, seemingly without a consistent pattern, some of the phones subsequently fail a getPhone request. The publisher replies with a 500 Internal Server Error, empty faultstring and axlcode -1. But after going into CUCM admin, drilling down to the device, and simply clicking "Save" suddenly it starts working. No changes were made, just the Save button was clicked. I have tried sending all manner of AXL reset requests to the device via doDeviceReset to no avail - those requests themselves are successful and the phone does reset, but the getPhone requests are still "stuck" until the Save button is manually clicked. I have also sent updatePhone requests, which are also successful in applying whatever updates were sent and if applicable causes a restart, but still the getPhone returns a 500.
    What function is the Save button within CUCM admin performing that phone resets are not and why is this happening?

    Spot on, Aaron. I haven't tested a solution yet, will post when I have, but here's what I found. I verified the XML is 100% identical save for the vendorConfig section. Differences of note: there is a blank line after the parent element in the bad XML and each element is on its own line, whereas the good XML the entire vendorConfig is on one line (though may not look like it in this textbox). This doesn't render the XML malformed but you never know. Also each child element in the bad XML has a "xsi:type='xsd:XVendorConfig'" attribute. Perhaps most importantly the following 6 child elements are missing from the bad XML:
    <recordingToneDuration></recordingToneDuration>
    <logServer></logServer>
    <lldpAssetId></lldpAssetId>
    <ipv6LogServer></ipv6LogServer>
    <sideToneLevel>0</sideToneLevel>
    <headsetRecording>0</headsetRecording>
    Here is the bad XML:
    <vendorConfig>
      <recordingToneRemoteVolume xsi:type="xsd:XVendorConfig">50</recordingToneRemoteVolume>
      <minimumRingVolume xsi:type="xsd:XVendorConfig">0</minimumRingVolume>
      <pcPort xsi:type="xsd:XVendorConfig">0</pcPort>
      <webProtocol xsi:type="xsd:XVendorConfig">0</webProtocol>
      <ehookEnable xsi:type="xsd:XVendorConfig">1</ehookEnable>
      <headsetWidebandEnable xsi:type="xsd:XVendorConfig">0</headsetWidebandEnable>
      <peerFirmwareSharing xsi:type="xsd:XVendorConfig">0</peerFirmwareSharing>
      <forwardingDelay xsi:type="xsd:XVendorConfig">1</forwardingDelay>
      <recordingToneLocalVolume xsi:type="xsd:XVendorConfig">100</recordingToneLocalVolume>
      <disableSpeakerAndHeadset xsi:type="xsd:XVendorConfig">false</disableSpeakerAndHeadset>
      <autoCallSelect xsi:type="xsd:XVendorConfig">1</autoCallSelect>
      <useEnblocDialing xsi:type="xsd:XVendorConfig">1</useEnblocDialing>
      <displayOnWhenIncomingCall xsi:type="xsd:XVendorConfig">0</displayOnWhenIncomingCall>
      <disableSpeaker xsi:type="xsd:XVendorConfig">false</disableSpeaker>
      <recordingTone xsi:type="xsd:XVendorConfig">0</recordingTone>
      <settingsAccess xsi:type="xsd:XVendorConfig">1</settingsAccess>
      <handsetHeadsetMonitor xsi:type="xsd:XVendorConfig">1</handsetHeadsetMonitor>
      <g722CodecSupport xsi:type="xsd:XVendorConfig">0</g722CodecSupport>
      <moreKeyReversionTimer xsi:type="xsd:XVendorConfig">5</moreKeyReversionTimer>
      <garp xsi:type="xsd:XVendorConfig">1</garp>
      <powerPriority xsi:type="xsd:XVendorConfig">0</powerPriority>
      <voiceVlanAccess xsi:type="xsd:XVendorConfig">1</voiceVlanAccess>
      <detectCMConnectionFailure xsi:type="xsd:XVendorConfig">0</detectCMConnectionFailure>
      <headsetWidebandUIControl xsi:type="xsd:XVendorConfig">0</headsetWidebandUIControl>
      <webAccess xsi:type="xsd:XVendorConfig">0</webAccess>
      <autoSelectLineEnable xsi:type="xsd:XVendorConfig">0</autoSelectLineEnable>
      <loggingDisplay xsi:type="xsd:XVendorConfig">1</loggingDisplay>
      <spanToPCPort xsi:type="xsd:XVendorConfig">1</spanToPCPort>
    </vendorConfig>
    And the post-save good XML:
    <vendorConfig>
    <disableSpeaker>false</disableSpeaker><disableSpeakerAndHeadset>false</disableSpeakerAndHeadset><forwardingDelay>1</forwardingDelay><pcPort>0</pcPort><settingsAccess>1</settingsAccess><garp>1</garp><voiceVlanAccess>1</voiceVlanAccess><autoSelectLineEnable>0</autoSelectLineEnable><webAccess>0</webAccess><spanToPCPort>1</spanToPCPort><loggingDisplay>1</loggingDisplay><recordingTone>0</recordingTone><recordingToneLocalVolume>100</recordingToneLocalVolume><recordingToneRemoteVolume>50</recordingToneRemoteVolume><recordingToneDuration></recordingToneDuration><displayOnWhenIncomingCall>0</displayOnWhenIncomingCall><moreKeyReversionTimer>5</moreKeyReversionTimer><autoCallSelect>1</autoCallSelect><logServer></logServer><g722CodecSupport>0</g722CodecSupport><headsetWidebandUIControl>0</headsetWidebandUIControl><headsetWidebandEnable>0</headsetWidebandEnable><peerFirmwareSharing>0</peerFirmwareSharing><lldpAssetId></lldpAssetId><powerPriority>0</powerPriority><ehookEnable>1</ehookEnable><ipv6LogServer></ipv6LogServer><detectCMConnectionFailure>0</detectCMConnectionFailure><minimumRingVolume>0</minimumRingVolume><sideToneLevel>0</sideToneLevel><webProtocol>0</webProtocol><handsetHeadsetMonitor>1</handsetHeadsetMonitor><headsetRecording>0</headsetRecording><useEnblocDialing>1</useEnblocDialing></vendorConfig>

  • 500 server error app store

    I've downloaded Lion this morning. now clicking on "install" I get a error message "500 server internal error".
    any ideas? it happens with other apps update too.

    I think I sorted this out.  My problem started with "your device or computer could not be verified" and morphed from there as I tweaked. 
    Try this at your own peril as ymmv.  Some of this may not be necessary as this was an excercise in trail and error. 
    Delete the following from /Library/Preferences/SystemConfiguration
    NetworkInterfaces.plist
    com.apple.network.identification.plist
    com.apple.airport.preferences.plist
    This all has something to do with the AirPort config - so that all needs to be reset.  Once these are deleted - reboot.  The NetworkInterfaces plist will rebuild.
    After boot - open network configuration and delete the AirPort interface from the Automatic profile.  Then immediately add it back. (not sure why I had to do this - but it didn't work otherwise).  Now reboot again.
    After reboot - make sure the AirPort is turned on -  you may need to give it some time to sort things out and find your networks.   At this point things may be fixed.
    Please don't do this unless you are comfortable jacking around with stuff that may make things worse.

Maybe you are looking for