5800 cannot read sms sender? need to add country c...

Anyone have this issue? My incoming sms will not regconised the sender unless the sender has a country code assigned. There to remedy this, I have add country code to all my contacts.
has anyone got a way to resolve this.

Youll still have to be the account owner to make those changes.
Is the account owner unavailable to make that change from their location?
Customer Service
(800) 922-0204
or dial *611 from your mobile phone
View the *611 On-Screen App for Android Video
6 AM - 11 PM, Mon - Sun
Emergency Service Hours
11 PM - 6 AM, Mon - Sun

Similar Messages

  • Cannot Read From Registry - Need to save and load config

    I have code the I have tested in other programs. I cannot read or write to the registry from a plugin. Any ideas?
    Any suggestions for the best way to save and load config information?
    Thanks!!!

    Hi Srikanth,
    Thank you for responding.
    I had a problem on one material. So deleted the request and Reload it from PSA. That issue got solved.
    And Now the problem is , Now my senior is saying Delete the data from April-09 till date and Reload it. The issue is My CUBE ( ZSD_C03 ) is updated with 4 data sources. 2LIS_11_V_ITM   ,  2LIS_13_VDITM   ,  2LIS_12_VCHDR  , 2LIS_11_VAITM .
    And I need to delete data from 2LIS_13_VDITM  data source . How Can I proceed for the current issue   ?
    Please suggest   ...
    Thank you ,
    Utpal

  • I cannot read SMS message

    Hi all,
    I have a problem with my nokia 5630 that I cannot read my SMS message.
    can any one help me ?

    Hi welcome to the forum.
    Could you be more specific,is there anything on screen,does the message not open etc can you post a screenshot?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Computer cannot read iPod

    When I plug the iPod into the computer, it continues as normal to upload the iPod.
    However, after a couple of seconds of trying, my computer comes up with a message saying that the iPod update attempt has failed, and that it cannot read or send to the iPod.
    I was under council to reset my iPod, as it still showed up on the screen. It erased the iPod as directed, and there is nothing left on the iPod.
    When I go into playlists, all of my playlists are there, but no music. Same with the Podcasts.
    Now, I have an iPod with no music, and no way to get music on to it.
    HELP?!?!?!?

    Try here.
    "Disk cannot be read from or written to" error syncing iPod in iTunes.

  • FRM-10221: Cannot read file MAIN_MENU

    FRM-10221: Cannot read file MAIN_MENU

    You need to put the menu in Form_path, make sure you do not put the menu extension in the form property

  • Hello MacBook Pro Musicians- I cannot read sheet music from the ipad. It is too small. I want to connect a large monitor, hopefully wirelessly to my 13 inch macbook pro. what would I need to connect ? Any suggestions on how to keep monitor from falling?

    Hello Macbook Pro Musicians--I cannot read sheet music from my 13" macbook or from an IPad. The print is too small for these aging eyes! So I need to get a large monitor to attach to the Macbook.  I want the monitor to be connected wirelessly or using a blue tooth.  This will eliminate alot of potential mishaps
    when playing out.  Also I am having a time figuring out how I am going to safely keep the monitor on somekind of music stand without falling!!!  Can anyone help me with this?

    Hi Julius,
    As you can see in my profile section, my MBP is older by 5 years, 2GB RAM and with regards to question 1 (Q1), has no problems with having all those programs open at the same time with the possible exception of Photoshop since I use Gimp instead. With twice the RAM and much overall much better specs, Photoshop shouldn't be an issue. But you listed some other activities that might need that additional RAM. But the advise most give is to not get it from Apple but from a third party.
    Q5 - I always get Apple Care. Only had to use it once but it paid for itself that one time.
    Sorry, can't help you much with the questions you really want answered since I won't have a new MBP until (hopefully) next week but for Q4, I believe it depends on the peripheral. My current monitors are too old to allow them to be hooked up in a chain. Supposedly, if the monitors do have the ports, you could via the MBP Thunderbolt port. The speeds are also dependent upon the peripheral. If the external hard drive is using a USB 2 port, you are limited by that speed (480 Mb/s). If it has a Thunderbolt port, then from what I understand, we, my friend, are in for some great times because I believe your RAM will have the ability to access data as fast as it can take it at 10Gb/s (and if will need those kinds of speeds, the 8GB of RAM may be the way to go). The Thunderbolt demos on YouTube where they are accessing four video files from a Raid drive, then sending them back out via Final Cut Pro to a monitor are amazing. I'll probably never push this machine to anywhere near it's limits but I can't wait to see what others do.
    Peace,
    Jeremiah

  • As administrator, I cannot edit certain files unless I add read/write/etc. for the Users group.

    I'm administering a Subversion server running on Windows Server 2008 R2.  When I need to add access to SVN repositories, I need to edit a svnaccess.txt file.  This file sits under C:\Program Files(x86)\CollabNet\Subversion Server.  When I
    attempt to edit the file, though, I cannot save it unless I save it to a new file.
    My account is part of the local administrators group.  All of the folders and subfolders in the path have Full Control enabled for Administrators.  The file itself also has Full Control enabled for Administrators.  Yet, the only way I can
    edit this file is to add Modify and Write permissions to the local Users group even though my account is only part of the local administrators group.
    What's odd too, is that if I can edit these permissions I must have the appropriate administrator privileges.
    I searched for this a while back and recall seeing a hotfix for this as it was a known bug in Windows Server 2008, however, I cannot for the life of me find this link anymore nor do I see a fix like this on the hotfix spreadsheet.  I need to locate
    the hotfix that corrects this to provide to our system admins.  For some reason, they will only install hotfixes if a problem is identified.
    If anyone knows of the hotfix that corrects this issue, please let me know! :)
    Thank you!

    Hi,
    As you said, if a user account belong to local Administrators account, when only Administrators group has permission on a folder, all admins except Administrator account will not have permission to access it.
    This is caused by UAC. All accounts in local Administrators group are actually working as standard accounts. When an Administrator action need to be performed, a prompt will occurs for permission to promote to admin permission. As only Administartors group
    has permission on a folder and the account we are using is working like a standard account, we will be denied from accessing.
    A workaround is to create a new group for all admins and give the group enough permission for accessing the target folder.
    Or you could run all accounts in Administartors group in Admin mode. See this article:
    UAC Group Policy Settings and Registry Key Settings
    http://technet.microsoft.com/en-us/library/dd835564(WS.10).aspx
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Looking to send an e-mail using 365. I need to add an attachment.

    Here is what I has so far and I am very close. I have tried many things. I added
    $attachment = New-Object System.Net.Mail.Attachment("XXXXX")
    But didn't work. The script below works for me I just need to add an attachment.
    $EmailFrom = "XXXX.com"
    $EmailTo = "XXXXX.com"
    $Subject = "Testing"
    $Body = "Thisisatest"
    $SMTPServer = "XX.XXX.XXX.XXX"
    $SMTPClient = New-Object Net.Mail.SmtpClient("Thisissmtp")
    $SMTPClient.EnableSsl = $true
    $SMTPClient.Send($EmailFrom, $EmailTo, $Subject, $Body)

    Hi,
    What was in your 'XXXXX' (not exactly helpful, btw)?
    Take a look at this article, which has an example of how to do this:
    http://www.techrepublic.com/blog/windows-and-office/send-an-email-with-an-attachment-using-powershell/4969/#.
    Reference:
    http://msdn.microsoft.com/en-us/library/system.net.mail.attachment%28v=vs.110%29.aspx
    EDIT: Also, why not just use
    Send-MailMessage?
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • I have keynote on ipad2 and powerbook g4. if I send a keynote work from mac to Ipad, I cannot read it. any solution?

    I have keynote on ipad2 and powerbook g4. if I send,by mail, a keynote work from mac to Ipad, I cannot read it.there is no problem fram Ipad to mac. any solution? thanks

    How are you trying to transfer the Keynote presentation?
    You can email the presentation to yourself and open it with Keynote on your iPad.
    You can use iTunes. Connect your iPad to your laptop, start iTunes, go to the App Tab for your device and add your presentation to the Apps/Keynote section. Now if you touch the "+" in keynote on your iPad you will get the choice Copy from iTunes.
    Your can setup iCloud on your laptop & iPad and save your Mac laptop presentation to iCloud and just open it on your iPad.
    There are, of course many other ways, Dropbox, etc.

  • How do I repair my Adobe Reader Send it Now add in?

    I am getting an error message:"Windows cannot access the specified device path or file. You may not have the appropriate permissions to access the  item."
    This is a private computer and I am the only one that uses it . How do I alleviate this problema and make "Send it Now' add in work?

    It may be related to this email :
    "Important notice: Continue using SendNow service via the web
    Dear valued Adobe SendNow customer:
    As part of several functionality upgrades being made over the next few months, the SendNow service soon will only be accessible and usable as a web app, from Acrobat and Reader, and/or from Microsoft Outlook. Beginning December 12, 2013, SendNow no longer will be offered as an AIR-based desktop app, but as an alternative you can continue to use the web app at http://sendnow.acrobat.com. We advise that you bookmark this site for quick, easy access.
    By signing into the SendNow service from an internet browser, you'll still be able to send and track large documents and multimedia files. Learn more about SendNow changes at the Adobe Document Services blog.
    Thank you for your patience during this transitional period. And, as always, we appreciate your business.
    The Adobe Document Services Team"

  • I have two email accounts that are set up on the same iPad.  I cannot seem to see, read or send email from the second account

    I just set up a second email account on the same iPad but cannot seem to see, read or send email from the second account. 

    I'm using Windows 8 (not 8.1) and whatever the latest Thunderbird version is. They're both IMAP accounts. I was using Windows Live, but I couldn't get that to work, so I switched to TB. It works JUST fine for the one account, but not the other! They're identical except for the "handle". Both off my local ISP, set them up at the same time.

  • When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

    When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

    hello, it sounds like the library is damaged.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • Getting an error message "itunes cannot read the contents of the iphone" ever since I used Sharepod. Do I need to restore back to factory settings?

    Getting an error message "itunes cannot read the contents of the iphone" ever since I used Sharepod. Do I need to restore back to factory s

    Did you every get a fix on this?
    Thanks

  • Captivate 4 - I need to add a Email Button that reads Submit

    I looked in the Help feature for Captivate 4 and couldn't find my answer.
    So my predecessor put a button on the quiz results page that would allow people to submit their quiz results to the LMS. I am unable to recreate this button. When I look at the button on projects she created, it is showing as an "email button". I have no clue how to add an "email button". I also can't copy/paste the button from one project to another. Nor can I copy/paste the slide from one project to another.
    Anyone have a clue how I add a "email button" from scratch?
    Here is a screen shot that partially shows the quiz results page, and the properties window for the button. THANK YOU for all the help!!!!!

    Hi Rick, thanks for the response. I appreciate it!
    So the issue isn't what the buttons are doing on the actual quiz slides, it's needing to add an Email button on the slide that gives the final scoring information (the reporting slide?). The screen shot you have shown me, isn't that the submit button on the quiz slides, not the final scoring slide?
    As you can see here, I have the Submit button on quiz slides:
    When I look at the properties of this Submit button, it shows as a Text button, not an Email button like the Submit button on the reporting slide is.
    Now I know you are probably thinking I should just click the drop down and select "email", but that selection is not there:
    Here are screen shots of my Quiz preferences and Reporting preferences:
    What I need to create is a Submit button on the reporting slide for the quiz that is an Email button. Like this one:
    When I look at the properties of this Submit button, it is an Email button. Notice how the tab says "Email Button" and not "Submit button" like the other properties windows for the other "Submit" buttons.
    This is where I'm stuck. When I go to Captivate projects that have a reporting page with a Submit button, I can't copy/paste the button. I tried to do a right click and I don't have a copy option:
    When I higlight Submit and go to Edit, I don't see the option to copy the button there either.
    So I figured I would copy the slide to the presentation that needs this Submit/Email button and I can't copy/paste the slide either. When I do a right click on the slide, there isn't a copy option:
    When I go to to Edit to try to copy the slide, the option isn't there either:
    I am really thinking that the Submit button the final reporting slide for the quiz is a Widget of some sort. Hum.
    Thanks! Karen

  • Cannot get or send mail using Apple Mail on iPhone and iPad

    Everyone in my household cannot get or send mail on their Apple Mail for iPad and iPhone. We all get the same message: "The user name or password for [account] is incorrect." This just started happening yesterday afternoon. No problems before that. I called my hosting company and Apple, and both blamed the other. My Apple system is always updated, so I have the latest version of Maverick. Had no problems with it up until now.
    However, I awoke this morning to find downloaded emails in the same program, but when I go to "get mail," it says the same thing, and still won't allow me to send or receive.
    Here's the kicker. I also use Gmail with the exact same accounts (yes, I need both since Apple Mail does things that Gmail doesn't, and vice versa). No problem! I get all my emails and can send with no problem. So, my hosting company claims it can't be them (makes sense). It only happens using Apple Mail, and I have several email addresses. None of them work (other than the strange phenomena of suddenly getting some of them downloaded for no apparent reason).
    What do I do from here? I've changed passwords, deleted and tried to set up my emails, only to get the message that they probably will not work. And they don't. I have shut down and restarted my iPad and iPhone, to no avail.
    Thank god for my Gmail account, or my business would be closed.
    Again, this is happening on four devices in my home: 2 iPads and 2 iPhones.

    I have a comcast account I use on my phone and use it for receiving and sending mail. When you look at the account in settings, you need to check each of these
    incoming mail server: mail.comcast.net
    username: the part of your email address before the @
    password: your password
    outgoing mail server: smtp.comcast.net
    Under Advanced
    Use SSL: On
    Authentication: Password
    Server Port: 995
    If you cannot make it work from changing settings in the account, delete the account and start over. Use the "Other" setting when starting the account. It is a POP3 account and make the entries I gave you. Once you do that, it should check the entries and validate the account. You shouldn't have any trouble from there. Those settings will work from either the iPhone on cell, or wireless. Mine will even work when I'm at home on my wireless there, which is on the Comcast network.
    Hope that helps you.

Maybe you are looking for