5D3 AFM bug setting all lenses to ALL-8

When the 5D3 came out it had a bug. AF microfocus would default to ALL-8 for all lenses. FW 1.2.1 was suppsoed to have corrected this.
I knew all AFM setting were at 0 becuase the EXIF data shows this. I sent my camera to Canon in early June. I got it back and did a grad in late June. Still at zero when I recently checked.
Did an engagement in early September and the images using my 70-200 2.8 V2 looked off. I kept looking at them from time to time. The other day I checked the cam and it was set to ALL -8.
I checked some of my vacation shots from July/August and again ALL-8. I have not touched the AFM adjustments since March.
I posted this on DPreview and POTN. A few people responded at DPreview that 1.2.1 has not completely corrected this.
Here is a post from POTN
Just checked my 5D3, all set to -8 (FW 1.2.1)
No wonder my Sigma 35 was constantly producing off shots. Funny thing is I did remember seeing -8 before without realizing this is a known issue, I didn't pay much attention and just set it back to zero at the time despite I was pretty sure I didn't set that value. Now that I've just checked it's on -8 again...
I asked if the FW was 1.2.1
Yes.
As said, I changed it back to zero when I saw it.
Then saw your thread and thought you know what let's check it again, and I see -8
So I just thought I'd throw this one out here and see what happens
Website

Thanks for the reply. I am a Canada CPS member but I have not had good success with Canon Canada Service. New Jersey has always been outstanding and I'm not even a member. Only issue is that I have to pay for shipping to New Jersey and Canon Service USA does not ship back to Canada so I use a USA shipping address.
If I have any other reason to send my 5D3 for service I'll have them look that this. Not worth sending it to the US for that and avoid trying to deal with Canon Canada on anyting critical. They do a good job replacing broken battery doors but anyting to do with camera performance is a crap shoot. For now I'll just keep an eye on it.       
Website

Similar Messages

  • Option to set 'all calls' on by default

    I've been told there's an option in CUCM 9.1.2 to set 'all calls' on by default, as opposed to the user having to activate it themselves.  I'm trying to find where to enable it at, but I'm not seeing it.  Has anyone come across this or am I losing my mind?
    thanks all
    SJ           

    I realize it's an old post, but i wanted to put this out there to hopefully help someone else...we've discovered a bit of a bug with forcing all calls on for all the phones via Show All Calls on Primary Line and Revert to All Calls.  The problem here is that if privacy is off, the secretary can barge in on the user's line even if barge itself is disabled via feature control policy.  If we turn privacy on, then the list of calls for each attorney disappears, so the feature is worthless and the secretary is angry.  If we use the function as a line appearance, though, with privacy on, it works as intended, showing a list of calls for all the people the secretary is responsible for.  We're working with TAC, as this behavior doesn't make any sense...
    Once we get a fix, I'll post a follow-up.

  • WLI 2.1 setting all workflows to Suspended Mode

    Hi,
    Twice now I have seen WLI set all instantiated workflows to a suspended state. Worse,
    I can continue to create workflows (via JMS Events), but they are also set to a suspended
    state. This normally occurs when a database exception has been raised on a WLI table
    or when someone was dynamically changing the active workflow template while one was
    being instantiated.
    Has anyone seen this happen? If so, what needs to be done to get WLI out of this
    mode of creating workflows in a suspended state?
    We are using WLI 2.1 SP1 and WLS 6.1 SP2.
    Thanks.
    --Todd

    BEA has provided a fix for this problem with WLI 2.1 SP1 rolling patch 3. You will
    need to contact BEA to get this patch.
    --Todd
    "Todd Dolan" <[email protected]> wrote:
    >
    After contacting BEA, they have confirmed that the suspended workflow problem
    is a
    bug and something that will be fixed with WLI 2.1 SP2. However, they did
    not have
    a date as to the release of that service pack.
    Louise -- Thanks for pointing me in the right direction.
    --Todd
    "Louise Scully" <[email protected]> wrote:
    Hi Todd,
    We were getting the suspended workflows problem a couple of months ago.
    We recieved
    a fix for this in a service patch, but we were running WLPI 2.0, so I would
    assume
    that the fix we received would be part of the service pack for 2.1
    To get WLPI out of this behaviour once it happens, try removing all the
    instances
    which are suspended by running this SQL:
    delete from eventwatch where instanceid in (select instanceid from instance
    where
    state=0);
    delete from instance where state=0;
    Hope this helps,
    Louise
    "Todd Dolan" <[email protected]> wrote:
    Hi,
    Twice now I have seen WLI set all instantiated workflows to a suspended
    state. Worse,
    I can continue to create workflows (via JMS Events), but they are alsoset
    to a suspended
    state. This normally occurs when a database exception has been raisedon
    a WLI table
    or when someone was dynamically changing the active workflow template
    while
    one was
    being instantiated.
    Has anyone seen this happen? If so, what needs to be done to get WLIout
    of this
    mode of creating workflows in a suspended state?
    We are using WLI 2.1 SP1 and WLS 6.1 SP2.
    Thanks.
    --Todd

  • Can I set all existing events in a ICal Server calendar to 'private'?

    I am consolidating my calendar histories. I have been able to get everything in my iCal Server calendar. But what I'd like to do is set all events before a certain date to 'private' as public/private has been lost for all items. I do want them in the iCal Server and not in a local client side calendar.
    Is there a way to do this?

    Hi, Trevor!
    Did you consult the online DOM documentation for something like that?
    I found the following:
    http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
    http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
    Using AnnotRichMedia instead of media could be the key. Since media seems to be outdated, deprecated or something…
    I'm out in the dark like you are with Acrobat and JS. Just consulted some of my bookmarks pointing at the SDK of Acrobat.
    Some dummy-code:
    var myRichMediaObjects = myDoc.getAnnotsRichMedia(nPage);
    Properties of AnnotRichMedia object:
    http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
    for(var n=0;n<myRichMediaObjects.length;n++){
    myRichMediaObjects[n].activated = false;
    Don't know much about the DOM here. Maybe there is no length property for the object that is returned by getAnnotsRichMedia() ??
    Did not try anything.
    Uwe

  • I recentley bought a ipod touch set all language to English, billing to English etc. The problem i have is when i open itunes or Apps store on my ipod it is in German, I'm English so don't understand German.. Can anyone help to change language in store

    I recentley bought a ipod touch 5.01,set all language to English.....every thing i view is in English except when i view (open) itunes or apps store it is in German, I live in England, I was born in England, and i speak only English. I want my itunes and apps store to open and display in English. I have messaged the apple help and telephoned the help, both was helpful but no matter what i do in setting (even in reset, which i've done) my ipod will keep reverting back to German in Itunes and Apps store. All other data in my ipod is in English........just the itunes and apps store grrrrrrrrrrrr.
    Please help :-)

    You can only use the German iTunes/App store if you are located in Germany.  The German store is in the German language.

  • When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

    I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
    Below is my iMac settings.

    Do you have a back up?
    If not you're into using file recovery software like  File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
    There are other such apps. Search on Macupdate or the App Store

  • Why did the most recent update set all my plug-ins to Ask to Activate and disable an Adobe one?

    Firefox update and none of my plug-ins were working till I went and changed them from Ask to Activate to Always Activate. This Adobe Acrobat NPAPI Plug-in says it needs to be updated but when I try it does not update. It returns to the same need to update screen. There is a problem with your latest update.

    I did try to update the plug-in. I would not. I fixed the problem by uninstalling the new firefox and downloading an older version and making sure it didn't install the maintenance program. This keeps it from updating. I even tried the 31 beta firefox and it set all plug-ins to ask to activate. Until you can fix this problem I will remain using the older version that works properly.

  • JQuery "setting all items to READONLY based on a page item" not working

    I am attempting to use jQuery to set all input fields to "readonly" if the question is in "locked" status (i.e., if P2_QUESTION_LOCKED page item is set to yes ("Y")). The following is the code that I placed in the page attributes (in the javascript section):
    if ($x('P2_QUESTION_LOCKED') )
       if ($x('P2_QUESTION_LOCKED') == 'Y')
           $(document).ready(
           function() {    $('input').attr('readonly','readonly'); });
       }It is not working. All input fields are available for input. I used Firefox 1.6 and Firebug and I have no errors. What am I missing?
    An example is set up in APEX.ORACLE.COM:
    Workspace: RGWORK
    Application: Financial Disclosure (Application 45806)
    User Name: TESTER
    Password: test123
    Run the application, and click on 'Update Current Year's' from the list.
    Robert
    http://apexjscss.blogspot.com
    PLEASE IGNORE THIS THREAD. A THREAD IS ALREADY OPEN. HAD A HICCUP WITH THE INTERNET.
    Robert
    Edited by: sect55 on Dec 12, 2010 3:11 PM

    Hi Robert,
    I have changed your code to
    if ($x('P2_QUESTION_LOCKED') )
       if ($v('P2_QUESTION_LOCKED') === 'Y')
            $('input').attr('readonly','readonly');
       }Especially the
    $x('P2_QUESTION_LOCKED') == 'Y'to
    $v('P2_QUESTION_LOCKED') === 'Y'I have also moved your code into "Execute when Page Loads".
    Couldn't try the code because I was not able to login, but I think the code should work.
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • I have a 3GS. The iPod on the phone has made duplicates of some songs. I've tried using the "get info" dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes they are still there.

    I have a 3GS. The iPod on the phone has made duplicates of some songs. I’ve tried using the “get info” dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are still on the phone.

    Some Users have reported that a Restore as New  has Resolved Issues after the Upgrade...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Acrobat 9 HTML to PDF conversion sets all checkboxes to checked - Duplicate question

    I am converting html files to pdf using Acrobat 9 pro. All of the check boxes and radio buttons come out checked.
    This is exactly the same as the following thread:
    Acrobat 9 HTML to PDF conversion sets all checkboxes to checked?
    That thread is old, but not answered. Has there been any update to this?

    Hi Don,
    Have you tried updating to v 9.5.5 and checked.
    Which OS and browser are you using?
    Have you checked the behavior with a new sample form on the browser?
    Regards,
    Rave

  • Printing.  My prints are not printing at the proper size.  If I designate 5x7 it prints at something around 4x3.  I have set all the parameters.

    My prints are not printing at the proper size.  If I designate 5x7 it prints at something around 4x3.  I have set all the parameters.

    When you saye a you have set all the parameters, does that include the cell size in the print module? Are you printing on 5 x 7 paper? And, if you are, have you set that paper size in the page setup?

  • How do I set all users to have complete permission access to all other users on a single Macbook?

    How do I set all users to have complete permission access to all other users on a single Macbook?  When one user uploads a picture from camera, the other user is told they don't have permission to view.  Same with music.

    Go to System preference> accouts>unlock>click+and add name of new user, Adrop dowm window will appear, new Account and set for Admi, fill in their name, to make things even more simple, use the same password for all,if it will allow it. Click ceate account. Click allow user to admin this computer.Then go to sys prefs, sharing and click all the things you want to let everyone use, If you use separeate paswords then each user can set their own preferences. All users can be set as as administrator, click allow access for all users. This will allow every one pretty much the same access.
    OH yeah reart the computer sfter added a new user, and test the new login, if it's good coninue.

  • Bug in all Adobe Reader Updates.

    Recently i have take notice of a bug in all the updates i get of Adobe Reader.
    When i first installed Adobe Reader i think i can remember choosing not to create a desktop shortcut.
    But whenever Adobe Reader updates, a desktop shortcut is created!
    Now, as i have chosen not to have the shortcut, the fact that one is created with every single update, must clearly be a bug.
    None of my other applications does this.
    Is it possible with a fix? or does Adobe go the way of so many other software developers does? "It's not a bug, It's a feature!"
    (bah! this was not supposed to be marked as a question, just a bit of a rant, but i'm new to the forums, so i didn't notice the option)
    Message was edited by: Rofleman

    Thank you for the correction.
    Been a while since i did a proper install of Reader. Mostly just do silent push install on our clients.
    Still don't think it is correct of the bug/update to create a desktop shortcut though...
    If someone want the desktop shortcut, they most likely will have it on the desktop allready, and those who doesn't have it on the desktop, are those who have removed it, and thus most likely doesn't want it back.
    So not adding the desktop shortcut would actually shrink the size of the update. Not by much, but that is irrelevant.
    It's a useless thing, that doesn't need to be there.

  • How to set "All day event " as default in Calendar in 9630

    In BB 9630 how do I set "All day event " as the default in Calendar?

    Hello,
    You asked the same question twice, albeit the first time in the wrong place:
    http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8300/How-to-check-as-default-quot...
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Set all media players in a document to start on page opening

    How can I set all the existing media players (mp3 files) in a document to start playing on page opening and stop on page closing
    I'm sorry for asking for a complete script but I can't work it out from the SDK manuals, and I think this example would help me a lot with future scripts
    Thanks
    Trevor

    Hi, Trevor!
    Did you consult the online DOM documentation for something like that?
    I found the following:
    http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
    http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
    Using AnnotRichMedia instead of media could be the key. Since media seems to be outdated, deprecated or something…
    I'm out in the dark like you are with Acrobat and JS. Just consulted some of my bookmarks pointing at the SDK of Acrobat.
    Some dummy-code:
    var myRichMediaObjects = myDoc.getAnnotsRichMedia(nPage);
    Properties of AnnotRichMedia object:
    http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
    for(var n=0;n<myRichMediaObjects.length;n++){
    myRichMediaObjects[n].activated = false;
    Don't know much about the DOM here. Maybe there is no length property for the object that is returned by getAnnotsRichMedia() ??
    Did not try anything.
    Uwe

Maybe you are looking for