WLI 2.1 setting all workflows to Suspended Mode

Hi,
Twice now I have seen WLI set all instantiated workflows to a suspended state. Worse,
I can continue to create workflows (via JMS Events), but they are also set to a suspended
state. This normally occurs when a database exception has been raised on a WLI table
or when someone was dynamically changing the active workflow template while one was
being instantiated.
Has anyone seen this happen? If so, what needs to be done to get WLI out of this
mode of creating workflows in a suspended state?
We are using WLI 2.1 SP1 and WLS 6.1 SP2.
Thanks.
--Todd

BEA has provided a fix for this problem with WLI 2.1 SP1 rolling patch 3. You will
need to contact BEA to get this patch.
--Todd
"Todd Dolan" <[email protected]> wrote:
>
After contacting BEA, they have confirmed that the suspended workflow problem
is a
bug and something that will be fixed with WLI 2.1 SP2. However, they did
not have
a date as to the release of that service pack.
Louise -- Thanks for pointing me in the right direction.
--Todd
"Louise Scully" <[email protected]> wrote:
Hi Todd,
We were getting the suspended workflows problem a couple of months ago.
We recieved
a fix for this in a service patch, but we were running WLPI 2.0, so I would
assume
that the fix we received would be part of the service pack for 2.1
To get WLPI out of this behaviour once it happens, try removing all the
instances
which are suspended by running this SQL:
delete from eventwatch where instanceid in (select instanceid from instance
where
state=0);
delete from instance where state=0;
Hope this helps,
Louise
"Todd Dolan" <[email protected]> wrote:
Hi,
Twice now I have seen WLI set all instantiated workflows to a suspended
state. Worse,
I can continue to create workflows (via JMS Events), but they are alsoset
to a suspended
state. This normally occurs when a database exception has been raisedon
a WLI table
or when someone was dynamically changing the active workflow template
while
one was
being instantiated.
Has anyone seen this happen? If so, what needs to be done to get WLIout
of this
mode of creating workflows in a suspended state?
We are using WLI 2.1 SP1 and WLS 6.1 SP2.
Thanks.
--Todd

Similar Messages

Is it necessary to set all tablespace autoextend?

Hello Everyone,
I am noticing some PeopleSoft tablespace is full after a period. For now, I just set those tablespace autoextend but it is not a solution for future. I am wondering if I can set all tablespace autoextend in one time? Is there a potential risk for this?
Thanks,
Bob

On Oracle db, you cannot set all datafiles in autoextend mode in one shot, it should be done per datafiles.
The risk to put the datafiles in autoextend unlimited is to fulfill your filesystem. Most of the shop consider better to set alert through OEM when tablespace is 80% full, for instance, and add manually files when needed. You also can spread off the datafiles across different mount points.
Nicolas.

Workflow Manager Suspends Workflows - "Invalid JWT token"

Hi,
I've installed Workflow Manager with the default settings described in this Technet article:
http://technet.microsoft.com/en-us/library/jj193514.aspx. Everything seems to install just fine but when I create a very simple workflow test on an "Announcements" list which simple
creates a Workflow History entry. However, the workflow immediately suspends with the following error which seems to be some kind of an authentication error. I am running the workflow logged on as a site collection administrator which is not 1. farm administrator
or 2. the service ID that I input into the Workflow Manager Configuration Wizard.I also DO have profiles installed, the user running the workflow DOES have a profile and I DO have the App Management service application installed. In addition, I rebooted the
SharePoint VM after the install
Given that Workflow Manager, Workflow Manager Client 1.0 and Service Bus 1.0 are all running on the same server as Central Administration (since I only have the one SharePoint VM) perhaps the reference to "SAMEORIGIN" in the error means something?
I've installed Workflow Manager with the same instructions on other farms in the past and not had this problem and wondering whether the June 2013 CU has introduced this error. . .
Please help!
Kathryn
RequestorId: f17eeb99-00f1-d82f-0000-000000000000.
Details: An unhandled exception occurred during the execution of the workflow instance.
Exception details: System.ApplicationException: HTTP 401 {"error_description":"Invalid JWT token. Could not resolve issuer token."} {"x-ms-diagnostics":["3000006;reason=\"Token contains invalid signature.\";category=\"invalid_client\""],"SPRequestGuid":["f17eeb99-00f1-d82f-9859-d5b160369f87"],"request-id":["f17eeb99-00f1-d82f-9859-d5b160369f87"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["4"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["Bearer
realm=\"2b0ecd05-1b3e-4efd-a346-c7b309bf6fb5\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]09bf6fb5\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4517"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Sun, 25 Aug 2013 22:22:02 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Kathryn Birstein, Senior SharePoint Architect

Hi,
Base on the description, an unhandled exception occurred during the execution of the workflow instance.
I suggest you to use other account to test the workflow. Please make sure you are not using system account. Also please make sure User profile service is running and syncing with active directory. As I've found sometimes workflow tries to read user information
from user profile service and if the user details missing in User Profile service, the workflow might get failed. The original error is "Token Contains Invalid signature" which means either the user is system account or the user doesn't exists in user profile.
There is an article about the error message, you can refer to it:
http://steve.thelineberrys.com/following-sites-across-farms-with-sharepoint-2013-mysites/
More information:
Troubleshooting Workflow Manager 1.0 Management and Execution:
http://msdn.microsoft.com/en-us/library/windowsazure/jj193529(v=azure.10).aspx?ppud=4
Best Regards,
Linda
Li

Create document set by workflow based on external list

Hello,
I'm wondering if the following is possible:
I have a external list with all my projects.
Next to that i have an document library where i place all the documents about the projects in document sets. Is it possible to automatically create the document sets based on the external list?
So when a new record is created in the database (External list) it automatically creates a document set. (The document sets have an external data column which refers to the projects external data)
I was thinking of an workflow, but i don't know how to accomplish this. I'm just a beginner with SharePoint.
Kind regards,
Robbert-Jan

Hi Robbert ,
According to your description, my understanding is that you want to create a document set for an external list in SharePoint 2013.
For achieving your demand, you can refer to the article:
http://msdn.microsoft.com/en-us/library/ff394479(v=office.14).aspx
http://blogs.msdn.com/b/chandru/archive/2013/08/10/sp2013-creating-document-set-using-workflow.aspx
One thing to notice is you cannot associate workflow with External List because workflow engine cannot run on back end system.
Reference:
http://siddiq-sharepoint2010.blogspot.in/2011/12/bussniess-connectivity-services.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Workflow giving "Suspended" Error on Calculated Columns- Sending Reminder Emails on List Due Date

I have created a list that has our reporting due dates plus calculated columns for 5 and 10 day reminders.
Example:
Due Date: 3/7/2014 1:00 PM
5 Day Reminder (Calculated Column= [Due Date] – 5): 3/2/2014 1:00 PM
10 Day Reminder (Calculated Column= [Due Date] -10): 2/25/2014 1:00 PM
As you can see in the list, it calculates the (5 and 10 day) reminder dates correctly in the list…
However, what I am wanting to happen is to build a workflow that will automatically trigger and send these reminder emails.
In SP 2013 Designer, I have my conditions set as:
I can go in on the list and set the workflow but once the due date/time comes up… The status changes from "Started" to "Suspended"-- I never receive a reminder email and I get the following error:
"RequestorId: ff5dac1d-ccee-ba1b-0000-000000000000. Details: RequestorId: ff5dac1d-ccee-ba1b-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP
500 {"error":{"code":"-1, System.FormatException","message":{"lang":"en-US","value":"String was not recognized as a valid DateTime."}}} {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["33"],"SPRequestGuid":["ff5dac1d-ccee-ba1b-8934-5a9d0c69d3c4"],"request-id":["ff5dac1d-ccee-ba1b-8934-5a9d0c69d3c4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Tue, 25 Feb 2014 18:49:09 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)"
The string I have set up within SP Designer for the dates is:
If Current Item:Due Date
equals Today
If Current Item:5 Day Reminder
equals
Today
If Current Item:10 Day Reminder
equals
Today
Any ideas as to what I am missing?
Thank you in advance!
Amanda

Hi,
To start the workflow, we have three options:
If you select the “start the workflow automatically when an item is created” or “start the workflow automatically when an item is changed”, the workflow can be started automatically.
If you don’t, your workflow will never run, and therefore never wait till the date specified.
The “Pause Until Date” action causes a workflow to pause executing until a specified date and time.
If current day is equal to the specified date, it will execute the next step.
More information:
Workflow actions quick reference (SharePoint 2013 Workflow platform)
http://msdn.microsoft.com/en-us/library/jj164026.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Move Files from one document set to another document set using workflow

Hi All,
Env : SP 2013 Server - SPD 2013.
I'm trying to make a SPD Workflow that must copy a files from one Document Set to another Document set in the same library other document library
Does Someone already get success for Copy files from one Document Set to another Document set?
Thanks for your help.

Hi,
According to your post, my understanding is that you wanted to move Files from one document set to another document set using workflow.
I recommend to use the custom workflow activity Copy List Item Extended Activityto
copy files to another document set.
You can do this with codeless SharePoint Designer workflows as long as you can install the
Codeplex Custom SharePoint Designer Workflow Activities.
These activities are also built-in to SPD2013. However, you can only use the custom activities in the SharePoint 2010 Platform.
To install the custom activities, please follow the steps as below:
Download the solution file form
Useful Sharepoint Designer Custom Workflow Activities
Copy the wps file to the Disk C.
Open the SharePoint 2013 Management Shell.
Run the command: add spsolution c:\ dp.sharepoint.workflow.wsp
Open the Center Administration, click System Setting->Manage Farm Solution-> dp.sharepoint.workflow.wsp->Deploy to one or more Web Application.
Open the SharePoint designer, create SharePoint 2010 Platform workflow, add action from Custom Actions.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Can I set all existing events in a ICal Server calendar to 'private'?

I am consolidating my calendar histories. I have been able to get everything in my iCal Server calendar. But what I'd like to do is set all events before a certain date to 'private' as public/private has been lost for all items. I do want them in the iCal Server and not in a local client side calendar.
Is there a way to do this?

Hi, Trevor!
Did you consult the online DOM documentation for something like that?
I found the following:
http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
Using AnnotRichMedia instead of media could be the key. Since media seems to be outdated, deprecated or something…
I'm out in the dark like you are with Acrobat and JS. Just consulted some of my bookmarks pointing at the SDK of Acrobat.
Some dummy-code:
var myRichMediaObjects = myDoc.getAnnotsRichMedia(nPage);
Properties of AnnotRichMedia object:
http://help.adobe.com/livedocs/acrobat_sdk/10/Acrobat10_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=JS_API_AcroJS.88…
for(var n=0;n<myRichMediaObjects.length;n++){
myRichMediaObjects[n].activated = false;
Don't know much about the DOM here. Maybe there is no length property for the object that is returned by getAnnotsRichMedia() ??
Did not try anything.
Uwe

I recentley bought a ipod touch set all language to English, billing to English etc. The problem i have is when i open itunes or Apps store on my ipod it is in German, I'm English so don't understand German.. Can anyone help to change language in store

I recentley bought a ipod touch 5.01,set all language to English.....every thing i view is in English except when i view (open) itunes or apps store it is in German, I live in England, I was born in England, and i speak only English. I want my itunes and apps store to open and display in English. I have messaged the apple help and telephoned the help, both was helpful but no matter what i do in setting (even in reset, which i've done) my ipod will keep reverting back to German in Itunes and Apps store. All other data in my ipod is in English........just the itunes and apps store grrrrrrrrrrrr.
Please help :-)

You can only use the German iTunes/App store if you are located in Germany. The German store is in the German language.

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

Why did the most recent update set all my plug-ins to Ask to Activate and disable an Adobe one?

Firefox update and none of my plug-ins were working till I went and changed them from Ask to Activate to Always Activate. This Adobe Acrobat NPAPI Plug-in says it needs to be updated but when I try it does not update. It returns to the same need to update screen. There is a problem with your latest update.

I did try to update the plug-in. I would not. I fixed the problem by uninstalling the new firefox and downloading an older version and making sure it didn't install the maintenance program. This keeps it from updating. I even tried the 31 beta firefox and it set all plug-ins to ask to activate. Until you can fix this problem I will remain using the older version that works properly.

JQuery "setting all items to READONLY based on a page item" not working

I am attempting to use jQuery to set all input fields to "readonly" if the question is in "locked" status (i.e., if P2_QUESTION_LOCKED page item is set to yes ("Y")). The following is the code that I placed in the page attributes (in the javascript section):
if ($x('P2_QUESTION_LOCKED') )
   if ($x('P2_QUESTION_LOCKED') == 'Y')
       $(document).ready(
       function() {    $('input').attr('readonly','readonly'); });
   }It is not working. All input fields are available for input. I used Firefox 1.6 and Firebug and I have no errors. What am I missing?
An example is set up in APEX.ORACLE.COM:
Workspace: RGWORK
Application: Financial Disclosure (Application 45806)
User Name: TESTER
Password: test123
Run the application, and click on 'Update Current Year's' from the list.
Robert
http://apexjscss.blogspot.com
PLEASE IGNORE THIS THREAD. A THREAD IS ALREADY OPEN. HAD A HICCUP WITH THE INTERNET.
Robert
Edited by: sect55 on Dec 12, 2010 3:11 PM

Hi Robert,
I have changed your code to
if ($x('P2_QUESTION_LOCKED') )
   if ($v('P2_QUESTION_LOCKED') === 'Y')
        $('input').attr('readonly','readonly');
   }Especially the
$x('P2_QUESTION_LOCKED') == 'Y'to
$v('P2_QUESTION_LOCKED') === 'Y'I have also moved your code into "Execute when Page Loads".
Couldn't try the code because I was not able to login, but I think the code should work.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

I have a 3GS. The iPod on the phone has made duplicates of some songs. I've tried using the "get info" dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes they are still there.

I have a 3GS. The iPod on the phone has made duplicates of some songs. I’ve tried using the “get info” dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are still on the phone.

Some Users have reported that a Restore as New has Resolved Issues after the Upgrade...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Acrobat 9 HTML to PDF conversion sets all checkboxes to checked - Duplicate question

I am converting html files to pdf using Acrobat 9 pro. All of the check boxes and radio buttons come out checked.
This is exactly the same as the following thread:
Acrobat 9 HTML to PDF conversion sets all checkboxes to checked?
That thread is old, but not answered. Has there been any update to this?

Hi Don,
Have you tried updating to v 9.5.5 and checked.
Which OS and browser are you using?
Have you checked the behavior with a new sample form on the browser?
Regards,
Rave

Printing. My prints are not printing at the proper size. If I designate 5x7 it prints at something around 4x3. I have set all the parameters.

My prints are not printing at the proper size. If I designate 5x7 it prints at something around 4x3. I have set all the parameters.

When you saye a you have set all the parameters, does that include the cell size in the print module? Are you printing on 5 x 7 paper? And, if you are, have you set that paper size in the page setup?

How do I set all users to have complete permission access to all other users on a single Macbook?

How do I set all users to have complete permission access to all other users on a single Macbook? When one user uploads a picture from camera, the other user is told they don't have permission to view. Same with music.

Go to System preference> accouts>unlock>click+and add name of new user, Adrop dowm window will appear, new Account and set for Admi, fill in their name, to make things even more simple, use the same password for all,if it will allow it. Click ceate account. Click allow user to admin this computer.Then go to sys prefs, sharing and click all the things you want to let everyone use, If you use separeate paswords then each user can set their own preferences. All users can be set as as administrator, click allow access for all users. This will allow every one pretty much the same access.
OH yeah reart the computer sfter added a new user, and test the new login, if it's good coninue.

WLI 2.1 setting all workflows to Suspended Mode

Similar Messages

Maybe you are looking for