7.01 to 7.3 Upgrade - Masthead - Yellow/Brown bars occuring after upgrade

Hi
We have upgrade our ABAP and JAVA stacks from NW 7.01 to NW 7.3.
The upgrade has had a little impact on the portal. In the portal masthead have we got two yellow or brown bars. A bar left of the Design bar and a bar between the Design Bar and the Welcome Area.
The width of these bars depends varies depending on the width of the Welcome Area (user first and sur name) and the screen resolution (off course the width of the Design Bar - however it has a fixed width).
The bars are not visible if the user has a long name and a small screen resolution.
The issue can be seen here: http://www.filefactory.com/file/c26db0d/n/Yellow_Brown_Bar_Issue.jpg#
Hope somebody can help.
Thanks and kind regards,
Torben

After a long running OSS SAP found the solution.
1. http://server:port/irj/servlet/prt/portal/prtroot/com.sap.portal.themes.integrity.update?themetype=portal
2. Select u201Cdefaultu201D for browser and u201CparPrtlMastHeadNotchBgColoru201D for parameter
3. Change the value from #E2D575 to #FFFFFF, press u201CSet Valueu201D and then u201CSave and Generateu201D

Similar Messages

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

HT3529 My iphone 3GS is stuck in recovery mode since upgrading to ios 5 and still, after upgrading to ios 6. What's up ?

My iphone 3GS is stuck in recovery mode since upgrading to ios 5 and still, after upgrading to ios 6. What's up ?

I just went through this yesterday and because i am no where around my computer i lost everything and now my battery drains very fast...you are going to have to recover your phone i hope you have everything backed up and are next to your computer...if you are push and hold your home button and plug into PC at same time and continue to hold the home button untill you see your USB on your pc screen light up (depending on what type of pc maybe i dont know what you have)
push home button
Plug into pc usb
usb on pc screen lights up..let go of home button
follow instructions for restore/sinc
hope it helps

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

It is best to wait till there is a 10.9.1 update as new OS X systems always cause problems to some installations. Better not to risk losing data unless you have a bootable clone that enables you to revert to the original (pre upgrade) state. Haste makes waste.
Check this thread if you wish to see what I am talking about.
https://discussions.apple.com/community/mac_os/os_x_mavericks

R12 upgrade : Historical data can be traited after upgrade to 12.1.3

Hello,
I'm testing an upgrade from 11.5.10.2 to 12.1.3 =< Path = upgrade to 12.1.1 and upgrade to 12.1.3.
My question is :
If we want run upgrade historycal data in post upgrade ,do i have to run it after 12.1.1 upgrade or i can run it after upgrade 12.1.3 if i didn't start managers betwwen upgrade 12.1.1 and 12.1.3...?
thanks

I'm testing an upgrade from 11.5.10.2 to 12.1.3 =< Path = upgrade to 12.1.1 and upgrade to 12.1.3.
My question is :
If we want run upgrade historycal data in post upgrade ,do i have to run it after 12.1.1 upgrade or i can run it after upgrade 12.1.3 if i didn't start managers betwwen upgrade 12.1.1 and 12.1.3...?You can run it after the upgrade when the application is up and use option=hotpatch when running adpatch (does not require an outage).
Oracle E-Business Suite Upgrade Guide Release 11i to 12.1.1 [ID 1082375.1]
Thanks,
Hussein

An error has occurred after upgrading from MBAM 1.0 to 2.0

The upgrade went fine, uninstalled MBAM v1.0 from SQL and IIS servers, rebooted servers and re-installed with MBAM v2.0. However, now when I go to the webportal every page shows the "An error has occurred" message.
I've checked the webconfig files under the Help Desk Website folder and it's got our server path in it. the webportal was working before the upgrade.

Good to hear it was a simple fix. I'm about to upgrade our production environment tomorrow night. Going from MBAM 1.0 to 2.0 SP1. Not sure where you upgraded from, but did you run into any issues. I've been looking and haven't seen anyone encounter any
real issues. We are not doing the SCCM integration btw.

I cannot do the 'all in one click' feature on Farm Town Gift Links. Can you tell me whats wrong? this occurred after upgrading to 5.0.

I upgraded to 5.0 and now I can't take advantage of the 'all in one click' feature.

See:
*[/questions/840221]

I continue to receive an App upgrade notice for an App that is not on my computer. Apple Tech support has no explanation or solution. This has only occurred after upgrading to Lion. How do I stop this?

I continue to receive an App upgrade notice for an App that is not on my computer. After spending several hours with a variety of divisions (Lion,iTunes,iPad,iMac) of Apple Tech Support, none can give me any definitive explanation or solution. Prior to my recent upgrade to Lion, this did not occur. Has anyone else had this problem? If so, how did you resolve the issue?

You get an update notice for an app that is not installed on your Mac. Is there a stranger's Apple ID also appearing on your Mac related with this update?
If so, you have a pirated app on your Mac. If not, it should be another issue.

Menu bar mayhem after upgrade to 10.6

I have just gone from 10.5.8 to 10.6.4 via the upgrade path.
General OS and Application behaviors are A-OK.
All software updates installed OK but a problem persists.
The menu bar at the top of the screen is all wacked out.
Spotlight icon appears and disappears, spotlight not working.
AirPort icon will not appear.
Smart Reporter icon remains visible and is working.
DropBox icon remains visible and is working.
iStat Menus are invisible but working !! ??
System Preferences crashes when I attempt to turn on or off any Menu Bar items.
Thank you in advance for any and all help.

Barney-15E wrote:
Apple does not provide a method to add status menu items, so all the ones you have there are a hack in some way. They will often break when an update happens because there is no "correct" way to write them.
Actually, adding third party *status items* to the menubar is supported. It is third party *menu extras* that are not. They look the same but the difference is that all status items always appear to the left of all menu extras & unlike menu extras cannot be rearranged or removed from the menu bar by command clicking & dragging them.
Third party menu extras always require some sort of hack (modification) of the OS & can compromise its security or stability (because they run in system space), while status items run in user space so at worst they can affect a user but not the entire system.
However, either one can cause problems if they are not up-to-date and compatible with Snow Leopard.

I have a 80GB Ipod and it is not recognized by itunes. It seems to have occured after upgrading to itunes 10.

I have a 80GB Ipod. Its been working fine for the past couple years, unitl now. I haven't downloaded any new music on to the Ipod in months. So I usually charged it directly from an outlet. I updated the itunes just recently, so I think it maybe the itunes itself. I plugged the Ipod onto my computer like always and it read connected, but it never opened up the Itunes like it usually does. Opened Itunes manually and my Ipod didn't show up on the device tab or anywhere else. Tried to reset it...that didn't work. Re-downloaded Itunes, that didn't work either. Once it showed up on Itunes, so tried restoring, but it said that it could not work,because it showed the Ipod as being used somewhere else? At that time it showed up on my computer as a device with a removable storage. Not sure what else to do. Do anyone have any suggestions?

Thanks But all those options assume that my IPOD is being seen by windows.
I get this error when I connect and the software is trying to install the drivers

ITunes did not recognized nano but recognize classic (occur after upgrade)

After update to 7.5 iTunes do not recognize the nano. with the classic everything works fine. Need help. Thanks in advance!!!

Simple restart of the iPod solved the problem

Problem in Product Category after upgrade

Hi Experts,
The problem occur after upgrade from CRM 6 to CRM 7. When doing the creation of campaign after inputting the Product ID a error message appear 'Invalid Parent Category for Product ____' . Found out that this checking was not available in CRM 6. Now we cant configure the product because this product comes from another system.
the checking is under CL_CRM_MKTGS_PROD_ASSIGN method CREATE_ITEM.
IF <fs_category_guid> IS INITIAL AND
           <fs_category2_guid> IS INITIAL.
          lv_msgv1 = lv_product_id.
          MESSAGE e031(crm_mktgs_products) WITH lv_msgv1 INTO mv_message_text.
          add_message_symsg( iv_log_type = cl_crm_mktgs_constants=>log_type_function ).
          RETURN.
Appreciate for any input or idea.
Thanks in advance.
best regards,
Etrafanob

Hi Etrafanob, Experts,
I was wondering if this issue has been resolved, and if yes - how. Having the same here after an Upgrade from 4.0 to 7.0.
Thank you very much!
Best Regards

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

7.01 to 7.3 Upgrade - Masthead - Yellow/Brown bars occuring after upgrade

Similar Messages

Maybe you are looking for