8330 - Problem Connecting USB and HeadSet

When I first got my phone I noticed that the USB cable would disconnect if the phone was moved slightly making it very difficult to confirm it was charging.  Also had a similar problem with the headset that came with the phone.  Called Bell, they sent me a new phone.
Now, charging doesn't seem to be a problem but when connected with the computer, it still disconnects if it is moved slightly.  Like the connection is loose or something!?
The headset that came with the phone still doesn't work, connects... but then disconnects even though the physical connection seems secure.
Oddly enough, a regular headset works just fine.
Anybody else have these types of connection problems?  I'm going to call Bell, but it's been a few months now so I'm not sure if they will do anything for me... UGH!

I have some good news. iPhone 3.1 has been released to developers as a beta and it addresses (amongst other things) some bluetooth issues.
I'm happy to say that with this beta, I am able to use my Philips BT headsets as a stereo device to listen to music, adjust volume and to switch between music and a phone call.
The bad news is that I can't use the main button to activate voice control or the prev/next buttons to change songs. However, remember this is the first developer beta of 3.1 so this issues may get addressed before release.

Similar Messages

  • Connecting USB and Charger at the same time

    Hello guys, Is there any problem connecting usb and charger at the same time? after that, the Nokia Battery Monitor 2.0 shows 93% after full charge. Any ideia?

    yes, there is a male-female usb extension cable sold on computer store.
    Just pick up the length you need.
    But the price is almost the same with the cheapest 2.0 usb hub (4 port), so you better consider the usb hub one.
    Good Luck.

  • Problem with Speaker and Headset in Windows Vista

    Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
    Regards,Edwin

    When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
    http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

  • HT201210 ipod touch frozen on connect usb  and will not sync

    my ipod touch has frozen on connect usb and will not sync

    Hi kittens53,
    Thanks for visiting Apple Support Communities.
    You can use these articles to troubleshoot the connection between iTunes and your iPod:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    Jeremy

  • Connecting USB and another computer via wireless

    Can I connect the printer to one computer via USB and another via wireless?
    This question was solved.
    View Solution.

    photonics wrote:
    Can I connect the printer to one computer via USB and another via wireless?
    Hi,
    Yes, but when sending 2 print jobs from 2 computers at the same time, the wreless job will fail. In many case it will recover itself but sometimes it can't.
    Regars.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Multiple external drive problems, both USB and Esata

    Everything worked well in Tiger on my first gen MBP. Since i switched to Leopard and now Snow, and a new UNI MBP in december 08 I have so many external drive issues.
    USB drives just disappear and power off (from the system not electrical) for no reason, mostly when connected to USB hubs. I've tried various hubs including the powered ones. But as soon as i go over two USB devices in the provided ports my problems start.. It feels like not enough juice is getting through those ports on my MBP. I never have a problem if i just connect 2 devices into the MBP, but it's not enough (i have 5x1tb external drives).
    Also the same with the express34 slot.. Everything was fine under Tiger and my old MBP, But now i get the grey wall of death so many times when connecting 2x esata 1TB drives. The system is so unstable with multiple drives both USB and. I'm currently working as a pro Photographer on assignment in Asia and these stability are starting to become a big problem.
    God forbid i'm even considering a switch back to windows for reliability, (yes, i did use the words windows and reliability in the same sentence)
    Does anybody else experience problems with multiple drives through leopard/snow leopard via Apple notebooks? I would love to hear some users experiences and hopefully find a solution to my problem.. In every other way the system works like a charm.
    I will post in 2 forums because i'm not sure if software or hardware related.
    Thanks, any help is appreciated.

    @ Gregory
    All my drives are 3.5" HD's all with external power cables along with a mains powered USB hub. Sorry, i didn't state that clearly in the original post (i thought the hint of all drives being 1TB was a dead giveaway:)).. However, this still doesn't explain the same behaviour of the 2x1TB esata drives which actually work well if no external USB drives are connected. Sorry i'm not technical but does the expresscard slot share any bridge,bus or power connectivity with the USB slots??
    I'll try this SMC reset that S.U mentioned...
    Thanks for everyones help and ideas so far.

  • (MODE PROBLEM) Fatal1ty Usb Gaming Headset HS-1000

    Hi, yesterday I bought my "Fatalty Usb Gaming Headset HS-000" .
    I installed it with the CD, and started messing around with some configurations etc.
    I realised that the sound was okay in game, but not perfect so I wanted to set some settings.
    Anyhow I googled what best settings suit for cs .6 , and I found that someone asked the same question, I saw on his
    Creative Audio Controll panel, he had a tab called "MODE".
    There were 3 modes
    - Entertainment mode
    - Gaming mode
    - Audio Creation mode
    picture: http://img220.imageshack.us/img220/3339/settingstw6.jpg
    I hadn't realised there were 3 modes, so I opened my Creative Console Launcher, and I realised it says
    "Entertainment Mode" to the top left...
    So I too tried to open Creative Controll panel, and I found that the "Modes" Tab was missing.
    I went to the site and downloaded latest driver, restarted computer, and tried again, it was still missing..
    I searched Creative folder for "game" and found a file called "ModeGame.crl"
    Which means it has to be there.. but I dont know how to switch mode to game?
    Please help me Fast!

    Hello L33TZuck,
    Welcome to Creative forums!
    You may want to check out my reply on this thread.

  • Long-standing problem reading USB and Firewire peripherals

    I have asked this question here before, but never really got an answer.
    My single biggest problem with my Mac is getting it to recognise peripherals. This seems entirely a matter of caprice: sometimes I can plug in a Firewire peripheral and it will be recognised, at other times the same peripheral with the same lead goes unrecognised. Sometimes I can dowload images from my Nikon, at other times the computer stubbornly refuses to recognise its existence. Sometimes a peripeharl will appear on the desktop but not on the sidebar. Sometimes I have to plug the peripheral directly into one of the slots on the back of the screen, at others it can be read from my Belkin extension. USB connections seem particularly subject to capricious behaviour, but Firewire isn't always immune.
    There appears to be no rhyme, reason or logic to any of this, nor does there seem to be any way of forcing a Mac to read the peripherals connected to it. Could somebody at least let me know whether this a well-known Mac glitch that nobody talks about, or do I have a bum machine?

    The low power devices such as cameras often need a wall powered hub to connect correctly.
    Digital cameras inherantly are better suited to have their media card connected to a USB card reader than directly from the camera.  They lose less power on their battery by doing this, and you have much better compatibility with card readers than cameras.
    Any USB device not following HID standard may fail as well.
    Some low powered devices are not familiar with Apple's Energy Saver. If your Energy Saver is set to go off, the USB ports will remain in a low powered mode until a shut down or restart is complete.
    Macs over 4 years old start having an array of peripheral and system difficulties as the PRAM battery starts to die.    Replace the PRAM battery for those that do.  This is not the same as the user replaceable battery on those that you can see the battery on the machine from the outside.

  • K8NGM2-FID problems: no usb and high cpu usage - HELP!

    hi folks,
    i've setup K8NGM2-FID inside an htpc with a clean install of mce 2005 (onboard video). For the past couple of days I've noticed a few things:
    1) if the pc goes into standby (S3) and then wakes up, sometimes task manager shows a cpu usage of 50% (on the graph) but looking at the list of tasks (for all users) nothing is runing that high - in fact system idle process shows 98% (while the graph is still showing about 50%) and the system is a bit sluggish; reboot fixes this but it's getting really annoying. I've installed the latest AMD x2 driver. Sometimes it goes to 98-99% after waking up but that's been rare.
    2) i've been getting a few BSODs lately, actually all started yesterday - 3 of them in a span of about 2 hours after insalling Nero. I'm going to try to figure out what is causing it that (proabably Nero - I hope since that's easy to undo) but what i've noticed is that when the system reboots after the blue screen, none of the USB devices work (i.e. keyboard, mouse, etc.). windows has to load, then I need to go in the back and unplug/replug the usb devices which then 'wakes' them up; this can get really annoying in a typical cramped home theater setup. software restarts seem to be good - ok hardware restarts are the problem. hooking things up to a usb hub has the same effect - i.e. I need to re-plug the hub to get them to work - it just means less things to plug/unplug.
    has anyone else noticed this? help save my sanity - this is driving me crazy. since this is an mce setup, it goes into sleep and wakes up several times a day so the high cpu issue when it comes up really gets in the way of using the pc. btw. during high cpu times, no mce related function (record/watch/the shell itself) is running.
    here's my setup:
    K8NGM2-FID - boots up with 3 short beeps - I think it's 1 beep pause then 2 beeps
    2 gigs kingston 3 CAS (2 x 1 GIG kit) pc3200 - boot screen shows it running at 400mhz in dual channel config
    X2 3800+ stock fan/heatsink with silver 5 (runs around 35-38 idle - inside a silverstone 'stereo rack' case)
    ms usb keyboard/mouse/mce remote
    coolmax 550W power
    3 140GB WD drives (ata 133 - not sata)
    onboard video - framebuffer set to 128megs
    latest (as of 2 days ago) nvidia and msi drivers - msi bios is the stock 3.0 (more on that later)
    the bios settings are all default as far as I can tell.
    pvr-150 tuner card
    promise ata 100 card
    nec 3500dvd
    all running on mce 2005 with rollup 2 and all the updates windows could find
    i haven't updated the bios because i've read about other folks having blue screen problems and the suggestion has been to up the voltage for the ram (I guess the default setup from MSI is lower than it should be) but apparently that option is missing from the 3.1 and later bioses? and reading the text file, it wasn't very apparent what the bios 3.1 was fixing other than a few cosmetic bootup texts. I'm planning to up the voltage later today.
    anyhow, any suggestions short of throwing the entire pc out the door are welcomed.
    thanks!

    ok here's what I've found about the high cpu...
    using process explorer, hardware interrups is taking all the cpu. i've tried to disable items one by one but nothing is working so far. what does work is if i choose scan for new hardware, cpu goes down to normal. standby and resume and cpu is up again. do the scan and it goes down again - without changing anything.
    i've re-installed the graphic board driver, nvidia 430 drivers, sound driver. not sure what else to do. checked my drives and they are all properly master/slave set.
    this is really getting crazy...anyone come across this?
    i'm a bit hesitant to go to bios 3.1 since i've seen lots of posts about BSOD and i've just gotten rid of that.
    thanks
    thanks a bunch!

  • Problem connect form6i and Oracle Database 10g

    I can't connect form6i to Oracle Database 10g
    When complete user/password@database fatal error produce:
    "Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience"
    Error Detail:
    AppName: ifbld60.exe     AppVer: 6.0.8.27     ModName: ora805.dll
    ModVer: 0.0.0.0     Offset: 000b4f04
    Product Install:
    - Forms Version: Forms [32 bits] Versión 6.0.8.27.0
    - Oracle Database: 10.2.0
    - Win XP professional with SP2.
    Any idea what might cause Forms to shutdown ubnormally?
    Thanks

    If your database is using the AL32UTF8 character set, Forms 6i cannot connect.
    Read this thread:
    connecting form 6i  to oracle database 10G express edition

  • Problems connecting iMac and iWire to Sony PlayStation 3

    Hi. Simple issue. I cannot for the life of me get my Sony PS3 to connect to my iWire local network at home, which otherwise I've never had any problems with.
    When I go through the (simple) setup procedure on the PlayStation, it locates my network, then asks me for my WLAN Key Settings, giving me the options of None, WEP and WPA-PSK/WPA2-PSK. I try entering my iWire password into the system as a WEP key (which I think is right), then it says it's not recognised and prompts me to put in hexadecimal settings (?). I try the same thing on the WPA option, again, it doesn't work. I've also tried putting in my Airport Express password, see if that changes anything, but it doesn't
    I couldn't see a topic heading on this subject heading through a search, so forgive me if it's already been answered elsewhere. Anyway, I'm stumped, so if anyone's connected successfully, could they share how they did it and what exactly a WEP key is! [Incidentally, I posted this earlier, but I believe in the wrong section]

    Thanks. My Airport Express is providing the wireless network - and on my Playstation, it comes up as Robert's Wireless Network (what I've called my AE network) and I put in what I know is the correct password for that network, but it comes up as unrecognised, even though I'm sure I've put in the correct word. So, if as you say I'm doing the right thing, then maybe I'm entering the information wrong, or need to add something to my standard WEP password?

  • Connecting speakers and headset together on Qosmio G30

    My question is, if it is possible to use two different audio out on Qosmio G30. It has two connectors, but seems to be connected together. I want to use my Qosmio with virtual DJ, one audio channel for speakers and one for preparing music (for headset). I want to have one music on speakers and one on headset for better mixing.
    Is this possible, or must I buy one more external audio card? Is this inside audio card two channels or not?
    Thanks

    Hello
    I have made follow test: Qosmio G30 connected to LCD TV. One headphone port connected to TV and second one to my headphones. On both sides I have had sound (the same music). After changing ports the sound was still there.
    I can say follow: You can hear just the same music on both ports at the same time but if you want to use two different things I think you must buy some external solution.

  • Have problems connecting laptop and ipad

    Hi, have been trying to connect my ipad 2 to my Acer laptop but cannot get them connected !

    Connected how - via USB connection and if so, your iPad is not recognized by iTunes when connected?

  • Problems connecting video and screen sharing

    see the leopard iChat forum, I moved it to there. thanks, its called Another Video and screen sharing connection problem
    Message was edited by: wishiwasmtbin

    Hi,
    Welcome to the  Discussions
    IS this Linksys doing UPnP ?
    This is set in the Administration page of the set up pages.
    Also in the Security Page disable the Anonymous Ping Blocking.
    If you set UPnP then make sure any Port Forwarding, Port Triggering and DMZ is disabled.
    These last three use NAT more strongly than UPnP and NAT can be an Issue.
    The Appleu3test accounts are effectively on Public IP address so Lees/no NAT
    1:52 PM Sunday; December 9, 2007

  • Problems connecting - 9i and Win XP Pro

    First off, I am a super duper beginner so I understand nothing of this application. I have Win XP Pro and have learned that 8i has issues with P4's so downloaded 9i instead of using the 8i CD I have. I also have the CD for Forms and Reports 6i also. My reason for the installation is a database programming class I am taking. At the current time I have 9i installed and I also installed 6i though am unsure if 9i will work with 6i. I tried to connect to SQL Plus using the username, pw, and hostname my professor gave me and I got an error msg saying "ORA-12541 TNS:no listener" BUT when I check the listener control thing and tell it to start the listener I get an error because it says it has already started and if i stop it and then start it again I still get the same message. I am able to log on to SQL using the generic username and password "Scott" and "tiger" with no hostname but I am unsure if this means anything as I know my info is correct. I am wondering if anyone can help me out. I no nothing about this application to be able to troubleshoot further and also am wondering if 9i will work with 6i. Thanks for reading this far and thanks in advance for any assistance. I think I have installed this app 3 times now and would love to get it all working properly so I can do my assignments....
    Jo-Anne

    Thanks for the reply. He gave us each our own usernames, our own passwords and the hostname to connect to the school. The school dns or ip address, either one, is not his it is the school's oracle server. I used my username and password and it gave me the listener error. In order for me to work from home I have to connect to the school's oracle server, i can't leave it blank. Does that make sense? Thanks again.

Maybe you are looking for