8mm film to IMovie

Does anyone have a suggestion as to how I can get from 8mm film to IMovie?
I had 400 feet of 8mm transferred to DVD But IMovie won’t accept it. Says QuickTime can’t parse it.
Called Apple and asked if QuickTimePro might do the job. The answer was yes and 100 bucks later I had Toast 8 Titanium. Rather than send it back( I thought I’d ordered QuickTime Pro) I called Roxio and asked if Toast would convert the DVD to something IMovie could use. Again, the answer was yes.
When I used Toast it gave me a message that it couldn’t do the job because the DVD “might be copy protected”. A call to the DVD provider indicated that the DVD was copy protected ... even tho’ it is my film on the DVD.
Someone said to try MacTheRipper. I did and it did rip the movie from the DVD but it was still “copy protected”. Running that through Toast didn’t help.
On online site suggests (buying) a digital movie camera and recording my movies from the projected movies, then transferring that to my MAC. I’ll probably do that if I can’t find something simpler.
I still have over 7,000 feet of 8 and super 8 film to work with so, if anyone has a suggestion I’d very much appreciate it?
For info, I’m very much an amateur.
IMAC G 5 (Intel) IMovie 6.03 QuickTime 7.0.3
and, I just downloaded all the info in IMovie comments re: help with deciding camcorder purchase .
Thanks,
JIm

A fascinating project!
My older brother had 4 hours of (silent) 8mm cine film dating back to 1958-1980 (when he finally bought a video camera!). He wanted me to convert them to carefully edited DVDs, with music, sound effects, titles and so on. Like a madman I accepted the challenge! To make life easier he lives in Belgium and uses a PC!
The process, to cut this short, was as follows:
At considerable expense he had all the film transferred to four DVDs in some PC-only friendly mpeg codec, and sent them to me.
I used Streamclip and the Apple mpeg thingy (saving time by not loking it up) to convert these to Quicktime DV files. To make life even easier, the Belgian moron who did the conversion to DVDs had not done so in chronologal order!
That made for a very large QT file, which I imported into iMovie, and set about carving it into date order, re-exporting the various years to QT as individual files, and then importing into iMovie projects to edit.
Only a couple of months later I had it organised into three projects, each of an hour or so, beautifully edited with titles, transitions, music, sound effects and other bells and whistles, and burnt them to 3 DVDs. I was generally agreed that I deserved an Oscar for technical merit!
That was just to let you know that it can be done!
Your only real hurdle is the copy protection. Can you get a fresh set that is NOT copy protected?
But before you even start I heartily recommend that you update your OS and all software to the latest versions, particularly Quicktime, and make that Pro.

Similar Messages

  • Convert old 8mm film to what 'format' to edit in iMovie?

    I have selected a service to convert and save my families old 8mm film to a hard drive (which I will be supplying). I would like to import the movies (files) from the HD into iMovie for editing and eventual burn to DVD. What format should the service save the files in? Quicktime .mov? or something else? The service lists: Raw DV or AVI Type 1 or Type 2 or Type 2c or Matrox AVI or Avid DV OMF.
    Mac G5   Mac OS X (10.4.9)   <<br>
    Powerbook G5   Mac OS X (10.4.9)  

    Hi Tyler!
    Of the options you list I would choose 'Raw DV'. iMovie is designed to handle a DV stream @ 13GB per hour, for editing and transfer to iDVD.
    But ask the vendor to confirm that his 'Raw DV' is designed for transfer to iMovie 6 on an Apple Mac, and before he loads up the hard drive you are supplying make sure that it has been formatted as Mac OS Extended (Journaled).

  • Imovie and 8mm film

    Is there anyone out there who scans 8mm film through to the mac? if so, what is a good brand to purchase and do you upload to you digital movie camera and then to imovie?
    last qustion - any chance you can purchase a scanner that does slides and 8 mil film. i have bags full of slides and film from my childhood that my dad shot and i really want to get it on dvd.
    thanks a million,
    movie lady

    I believe most scanners have slide adapters that can be purchased. My sister-in-law did all of he fathers old slides this way, but they had to be scanned on at a time. She has patience.
    As far as 8mm film goes,you can project the image onto a white screen and use your dv camera to capture the footage, but you have to adjust your video camera shutter speed to 24 frames per second, to match the shutter speed to the 8mm . You can purchase telecine equipment that will do the job, but the profesionals have the best equipment that capture the movies directly to 3ccd cameras. You will have all of your films saved onto mini dv tapes. If you are talking about transfering a few hours worth of film, it hardly pays to purchase the high end equipment. You probably only want to do this once , so why spend money and have "adequate" or poor results?
    I had over ten hours of silent 8mm film and super 8mm sound film transfered by Home Movie Depot. The results were fantastic, but expecxt to pay approximatley $0.15/foot.
    They clean the film, and correct for lighting variations. I had some problems with some of the results, and they redid that portion, no questions asked.
    Since you get the films back on mini dv's, you can load the footage onto your mac & edit away, and burn your dvd's.
    http://www.homemoviedepot.com/

  • 8mm film to video- what do I need to know to transfer properly?

    I'm going to have my dad transfer all of the family 8mm films at a professional transfer place. (8mm, mind you, NOT Super8) to DVD. I'd like to have uncompressed (HD) files so that someday in the future I can put them into imovie. For now, my dad would like them all on DVD.
    What do I have my dad tell the guy at the transfer house in terms of transferring and format? Will this take a huge, huge drive for all the files? How many Gigs per hour of 8mm film?
    Thanks!
    David from NYC
    p.s. my dad lives near Philly, and I live in NYC....any recommendations for places that do this in one of these cities or their environs?

    I did a project like that earlier this year. [Details here|http://discussions.apple.com/thread.jspa?messageID=11284809&#11284809]
    My recommendation is to capture in HD to a hard drive so you can edit the movies.
    If all you want is unedited movies in SD, a DVD is OK.
    The company I used, MyMovie Transfer.com (aka Debenham Media Group), is in Coraopolis PA, but I did everything by mail.

  • Importing digital copies of films into iMovie

    I am using an external service to convert my old 8mm films to video. The transfer quality is superb but they are only set up for Windows. If they give me avi versions on dvd will they be only playable with Windows (or WMP for Mac?) or is there some way I can import them into iMovie for editing? Would an alternative route be to convert a standard dvd back into Quicktime and then import that into iMovie?

    Hi Peter,
    .avi is just a container, not a video compressor... that service should tell you what compressor/codec they use...depening on that, a) iM could be able to import directly, b) QT pro is able to convert into dv, iM's native format c) you need Streamclip for converting mp1/2/4, divx, avi, vob...
    for converting DVD conetnt, you need addtionally for 20$ Apple mpeg2 plugin
    or you give these tools a try:
    * DVDxDV, it has a 30d trial period (testdrive sets a watermark)... and cost 25$
    * Cinematize >60$
    * Mpeg2Works >25$ + Apple plug-in
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
    DVD is normally end-of-the-road, means, loss of pic quality after conversion back to dv... ask te service for conversion to miniDV tape, or storage as "dv" on a "PCformatted data dvd" (don't worry, your Mac is able to read that...), but that fits only 20min of video per disk...

  • Old 8MM film conversion

    This year I would like to convert all my old 8MM film to DVD format for importing to iMovie for editing.
    Question: Can the Intel iMacs import from DVDs?
    Can anyone provide me with instructions to import from DVDs?
    I've tried importing a movie burned in iDVD back into iMovie, but it's just not obvious to me as to how to do it.
    Thanks

    Hi rjr535
    You will have to convert the DVD's image and audio to MPEG-4 (mp4) befor you can import it to iMovie!
    I use a DVD recorder to burn my old camcorder tapes to DVD's, then pop the DVD's in the iMac and use HandBrake to convert them to MPEG-4 befor importing to iMovie!
    Here is the link for [HandBrake|http://www.versiontracker.com/dyn/moreinfo/macosx/21117]
    Dennis

  • 8 mm film into iMovie

    I have quite a bit of the old 8mm movie film, and would like to get it into iMovie 4 for editing. A local firm will transfer it to a DVD, but I am not sure if I can then get the clips from the DVD into i Movie.
    Any other suggestions as to how to get the images from the film into iMovie?
    Thank you.
    nebr
    iMac G5   Mac OS X (10.3.9)  

    Hello nebr,
    I have had a lot of 8 mm movie film converted to directly to miniDV. This is obviously the best option to use with iMovie. I just plug the tape into my camera and load the movies into iMovie just like my newly filmed material.
    If you ask your local firm, I am sure that they can transfer the movies to miniDV rather than a DVD. They will probably charge you for the tape, or ask you to provide the tapes you want, but I am sure that they can do it. If not, there are plenty of other companies out there who will - and you can find them easily with a google search.
    You do NOT want them to transfer your data to DVD! It is very difficult to get info from a DVD into iMovie. Plus, the info on a DVD is compressed, so you get a degraded copy when you try to retreive info from it (and the old movies on 8mm film reels are often pretty poor quality to start with, so any further degradation is really noticeable).
    Hope this helps,
    Lincoln

  • I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0.  Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

    I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
    Bob

    Bob
    What do you have now.....
    What computer operating system do you have?
    We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
    What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
    If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
    If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
    VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
    VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
    Does the above scenario apply to you?
    The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
    the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
    I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
    Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
    1. Place the DVD disc in the burner tray
    2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
    3. Go to
    Get Media
    "DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
    "Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
    Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
    You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
    With this VOB selected, click on Get Media to get the file from there into the project.
    Should work fine.
    Complications may be involved if the people who processed your footage gave you something other what is described above.
    Please review and consider, and then we can plan our project strategy accordingly.
    Thank you.
    ATR

  • I produced a film in iMovie and send it to iDVD to make a DVD with a theme. When everything was ready it starts at my mac-computer. But at the TV the theme always comes at the end of the film not at the beginning. What have I to change, what´s wrong?

    I produced a film in imovie and send it to idvd to make a dvd with a theme. After finishing all the dvd starts in my mac-computer and first comes the theme and then the film.
    But when I start it with a dvd-recorder at tv first the film comes an at the end of the film the theme comes. What did I wrong? Where is my mistake?

    Hi
    A. Do not Use - Share to iDVD - in any iMovie version at all !
    B. Start a BRAND NEW iDVD project
    C. in iMovie'08 to 11 -  Share to Media Browser and as LARGE - NOT HD or other resolution as quality will be even worse
    - in iMovie HD6 - just close it and from within iDVD import the iMovie movie project icon (with a Star on it)
    - FinalCut - Export as QuickTime Movie - NO QUICKTIME CONVERSION - AT ALL !
    D. When in iDVD - see to that in the Lay-out menu (when it looks like a box-plott) there ARE NOTHING in the upper left most box (Auto Start box). As this overruns any Menu.
    E. Save as a DiskImage - TEST this first - befor burning any DVDs
    Yours Bengt W

  • Using Still images to create a stop motion film in imovie

    Hi all, I'm trying to create a stop motion film in imovie using photo's I've taken with my camera, I've managed to put it all into the sequence I want, and even put background music on, but for some reason I can't stop imovie, panning in and out on individual photo's/clips of my film, so whereas when i flick through the photo's on my camera, it creates a pretty good stop motion film, but on movie it looks as though I've held everything by hand not using a tripod, making it jaunty and not playing well.
    Does anyone know how to make it stop doing this? My friend hasn't been able to stop it from doing it either!
    Thanks

    but for some reason I can't stop imovie, panning in and out on individual photo's/clips of my film, so whereas when i flick through the photo's on my camera, it creates a pretty good stop motion film, but on movie it looks as though I've held everything by hand not using a tripod, making it jaunty and not playing well.
    iMovie '08 installs with the Ken Burns Effects preference selected. When you add a photo, it is automatically added by turning it into a "still frame" sequence of frames at the default length with the KBE applied. To get rid of it make sure your "Project" aspect ratio matches the aspect of your photos. Then select the photo sequence in the "Project" window, select the "Crop" tool, and choose the "Fit" option in the preview window. This will get rid of the KBE. Now all you have to do is select any single frame in your "Project" sequence (or multiple frames if you want to "slow" down the final motion sequence in your project), split the sequence, and then discard the unwanted frames. (You could also use Command-C to temporally "store" your selected frame(s) to memory, discard the entire sequence and then use Command-V to paste the frame(s) in memory back into the project window at the proper location in your "timeline.")

  • I can not export my film from imovie vs ipad from the last update . Pls Help me

    I Can not export anymore my film from imovie ipad si ce the last update ,why ? Somebody can help me pls ...

    I cannot help you because your description of the problem is very vague. First what software did you update, iOS or iMovie. Second where are you trying to export iMovie Films to?

  • I have made a film in imovie and i have moved it into IDVD and now i have it on my desktop. How do i move it on to a blank DVD disk

    i have made a film in imovie and i have moved it into IDVD and now i have it on my desktop. How do i move it on to a blank DVD disk

    What is it doing on the desktop?
    You burn the DVD selecting Burn in iDVD.
    iDVD tutorials:
    http://www.apple.com/findouthow/movies/idvd.html
    Of course this assumes that you actually have iDVD, as it is no longer included in new Macs running Lion:
    https://discussions.apple.com/docs/DOC-3673

  • Editing a film with IMOVIE and create a DVD memu with IDVD

    Dear all,
    I edited a film with Imovie (with music, picture effects...). Now I try to create a DVD memu with IDV. For example, for a trip, I want to create a main menu (Australia) and sub menus (Sydney, Red center...). With this sub menu I want to attach some specifics sequences of my film edited with IMovie.
    I export the film from Imovie but when I try to use it with IDVD I have only one file. So I cannot create a menu and chose different sequence.
    Could you please explain to me how to obtain sequences edited on IDVD. I can see some sequences on IDVD but it is the uncut movie.

    I had the same question about iMovie'08 a few days ago. You need to add the chapters outside iMovie'08. I found this freeware at http://www.applesolutions.com/bantha/MH.html and it worked well for me.
    Basically it opens your movie file exported from iMovie. You select manually the location of each chapter, then save the file again. When you drop this new file onto iDVD, the expected PLAY and Scene Selection buttons appear as expected. The instructions on the site are easy to follow.
    Alternatively, there is a also a separate hack to edit the ProjectData file located inside the iDVD project package, but this did not work properly for me. I have not tried the GarageBand hint.

  • 8MM Tape into iMovie

    Been transferring 8mm tapes into iMovie via my Sony TRV350 camcorder and firewire cable. Goal is to convert all of these to DVD via iDVD. 2 questions-
    1) Should the "Automatic DV Pillarboxing & Letterboxing" box be checked?
    2) On my camera settings, it has a A/V--->DV OUT option, which can be turned ON or OFF in the menu VCR settings. According to the manual, when it is OFF, it is "to output digital images and sound in analog format using your camcorder." When it is ON, it is "to output analog images and sound in digital format using your camcorder." I have tried importing with both settings (ON and OFF), and it imports fine both ways, and I haven't really noticed any difference. Do you think this actually matters? The 8mm tapes are analog and I want to convert them to digital format (DV), but it appears it's doing that with either setting.
    Any help would be greatly, greatly appreciated. Thanks for your time.

    My iMovie version 4 doesn't have those options, but I am guessing they are for 16:9 and other widescreen formats. Your old 8mm video is likely standard 4:3 ration, so you probably don't need those checkboxes.
    I think the DV Out only matters if you need the video to be present on the analog output jack on the camcorder (looks like a headphone jack like on an iPod). My thinks that that you always get video output present at the Firewire port but the analog port is probably off when you have DV Out set to ON. So as you found, if you are not using the analog port, it doesn't really matter.
    Enjoy,
    Patrick
    p.s. after several years, I am finally up to analog tape #12 with two more after than to finally finish my analog to digital conversion using my old Sony TRV330 Digital8 camcorder.

  • Will FCE 4 Import Analog 8mm Tapes (unlike iMovie '08)

    Hello--
    I've had a heck of a time importing my older analog 8mm tapes onto my MacBook and was wondering if dropping bigger bucks on FCE 4 will help.
    Since iMovie '08 for some reason won't import analog 8mm tapes from my Sony TRV-330 Digital8 camcorder, I've had to import the tapes using iMovie HD. The problem is then I have to save the iMovie HD project before I can import the video into iMovie '08 where I want to tag and edit it...and this takes a lot of extra time (hours per tape).
    On other discussion boards, people have suggested using other video importing applications such as Vidi, iDive, and QuickTime Pro. The first two didn't seem to work out for me, so I just spent $30+ to get QT Pro...that was a mistake because the video and audio quickly got out of synch which was completely unacceptable (some of my older tapes have periodic video and audio dropouts due a problematic camcorder at the time, which I understand can cause that problem...but it didn't seem to be a problem for iMovie HD).
    So, since I've read on these FCE discussion threads that FCE uses QuickTime it makes me wonder if I'd have the same video/audio synch problems in FCE (if it even would import analog 8mm video at all).
    BOTTOM LINE: Has anyone successfully imported analog 8mm videotapes from a digital camcorder into FCE 4? I'd really like to be able to catalog, tag, and edit ALL my tapes (analog 8mm and Digital8) in iMovie '08 (but am willing to try to do it in FCE 4 if that's a better comprehensive solution). When will Apple fix iMovie '08 to make the lives of those of us who want to transfer old analog 8mm tapes easier??

    Thanks for the response, M.R. I didn't know QuickTime was also the import engine for iMovie HD...if that's the case, I don't know why iMovie HD would import my analog 8mm tapes while iMovie '08 doesn't (assuming iMovie '08 also uses QuickTime as the import engine).
    I haven't really considered a converter box since the Sony TRV-330 camcorder does the analog to digital conversion...seems like it'd be unnecessary. Do you think there's the possibility that the output from a converter box would look different than the output from my digital camcorder to iMovie '08?
    --Bill

Maybe you are looking for