9i installation problem on Fedora 5

Hi,
I am having some difficulties when installing Oracle 9i on Fedora 5 using the article from http://ivan.kartik.sk/oracle/install_ora9_fedora.html.
Specifically, it is when "switching the GCC3 compiler binary with GCC2 compiler binary as following" by doing these:
su -
# cd /usr/bin
# mv ./gcc ./gcc3
# mv ./gcc296 ./gcc
When entering the 3d line, I got this message:
mv: cannot stat './gcc': No such file or directory.
Can someone help?
cder.

I was kind of succesful to bypass this step. However now I have another issue. The article that I have been following (http://ivan.kartik.sk/oracle/install_ora9_fedora.html) says to install j2re-1_3_1_15-linux-i586.bin, or higher. So I downloaded jre-1_5_0_06-linux-i586.bin.
// part of article
Login as root and make the the file executable and then execute it. When the JRE is exracted move the "jre1.3.1_15" di rectory to "/opt" directory.
# chmod +x j2re-1_3_1_15-linux-i586.bin
# ./j2re-1_3_1_15-linux-i586.bin
# mv jre1.3.1_15 /opt/
// end of the part of article
I assume a directory will be generated after extracting the file. However, I did the first 2 lines using the appropriate file names but there is no new directory.
Can someone help? I am a real newbie on this. :-)

Similar Messages

Studio Creator installation problem with Fedora 5

Hi,
I tried installing JCreator in Fedora core 5, but I get the problem concerning the graphical installation. I tried installing Jcreator in silent mode using the command line options -is:log log.txt �silent and a sp file which sets the installDir and is.debug to 1 , however the installation does not complete, properly and it does not install the SunAppServer8 directory

I can't recall what they are, but I know that there are some libs that you need to install to get the Creator installation to complete OK on Fedora 5.
I think that I ended up using some libs from either Fedora 3 or 4 since there were no Fedora 5 versions available for the two (and again, I can't recall what they were) libs.
I do know that it is possible though as I have Creator on Fedora 5 right now.

J2esdk installation problem on fedora 2

Hello All
I am tring to install the j2eesdk-1_4_01-linux.bin on my newly intalled redhat fedora system
while running on command prompt as
$./j2eesdk-1_4_01-linux.bin
it gives error message like
./j2eesdk-1_4_01-linux.bin: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory
please help me
Thank you

This hang is a known issue on some Linux distributions and seems to triggered by particular environment settings. To work around it, you can run:
/j2eesdk-1_4_01-linux.bin -javahome <java_directory>
where java_directory is location where you have preexisting JDK or JRE 1.4.1 or higher,
If you don't have preexisting JRE or JDK installation, you can also take a look at workaround (unzip and invoking Java installation wizard directly) described in this thread:
http://forum.java.sun.com/thread.jsp?forum=136&thread=507826

Installation problem on Fedora 5

I try to insteall Java Studio Creator on Fedora 5, but it fails and saying I need some c++ libraries?
Does anyone know why? I thought Java Studio Creator is all java based, why it needs c++ libraries and how can I get around it?
Thank you.

Hi There,
Please take a look at the FAQs and the following threads, it might be of help to you.
http://developers.sun.com/prodtech/javatools/jscreator/reference/faqs/index.jsp
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=47519
http://swforum.sun.com/jive/thread.jspa?threadID=50316&messageID=178971
Thanks
K

Installation problem on fedora linux

Hi
I am trying to install oracle 10g to Fedora Linux.
When I type ./runInstaller :
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-08-21_12-40-12AM/jre/1.4.2/lib/i386/libawt.so:...........................
Exception in thread main java.lang.NoClassDefFoundError
Please help me to solve this problem

Ricardinho,
try post full error message (or stack trace) because in this case we can only guess...
Also when you post name of Linux distribution then don't forget post the version.
Anyway according to partial error message I think there is missing libXp.so.6 library on your OS.
So execute "yum install libXp" to install required package. Od locate the package on installtion media and install it via "rpm -ivh" command.
Note: In FC5 and later libXp.so.6 is included in libXp package. In FC4 and older releases you need to install xorg-deprecated-libs package.

Sun Java Studio Standard 5 installation problem on Fedora C2

Hi,
I've downloaded the trial version of Java Studio Standard 5 IDE and have bypassed the version hooks to load it on Fedora Core 2. It's get past the questions but hangs after pressing "Next" on the "Select the components" page. Any solutions, I don't want to hear, use Java Desktop or Redhat 7.2, I don't like Java Desktop and I'm not going back to a unsupported Redhat OS.
I'm working with Chemeketa Com. College and trying to demostrate a IDE tool that supports Web Services. Please suggest a solution, maybe selecting another IDE.
Thanks
Rick

Refer to this thread for possible solution:
http://swforum.sun.com/jive/thread.jspa?forumID=78&threadID=20077

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

OpenSolaris 2008.05 Installer problem

I am new to Solaris and i would be very to all of you who can help me with the following problem:
Description:
The following message appears on the screen:
Installation did not complete normally.
For more information see the installation log file:
<OM Oct 11 13:11:53> Timezone setting will be TZ=UTC
<OM Oct 11 13:11:53> Set timezone
<OM Oct 11 13:12:37> disk partition info changed
<OM Oct 11 10:13:29> Timezone setting will be TZ=Europe
<OM Oct 11 10:13:29> Set timezone
<OM Oct 11 10:18:27> Set user root in password and shadow file
<OM Oct 11 10:18:27> User name not specified
<OM Oct 11 10:18:27> list_ufs_db:: The entry 'naskoo' was not found in the /etc/passwd table
<OM Oct 11 10:18:27> Set user naskoo in password and shadow file
<OM Oct 11 10:18:27> Renaming table /etc/inet/AAAjnaGGb to /etc/inet/hosts
<OM Oct 11 10:18:27> Disk was changed
<OM Oct 11 10:18:27> Disk contains valid Solaris partition
<OM Oct 11 10:18:27> whole_disk = 0
<OM Oct 11 10:18:27> diskname set = c3d0
<OM Oct 11 10:18:27> Set fdisk attrs
<TIDM_E Oct 11 10:18:27> fdisk: fdisk -n -F failed. Couldn't create fdisk partition table on disk c3d0
<TIMM_E Oct 11 10:18:27> Couldn't create fdisk partition table on disk <c3d0>
<OM Oct 11 10:18:27> Could not create fdisk target
<OM Oct 11 10:18:27> TI process completed unsuccessfully
<OM Oct 11 10:18:27> ti_create_target exited with status = -1
<OM Oct 11 10:18:27> Target instantiation failed exit_val=-1
<OM Oct 11 13:20:28> Timezone setting will be TZ=UTC
<OM Oct 11 13:20:28> Set timezone
<OM Oct 11 13:20:28> Timezone setting will be TZ=UTC
<OM Oct 11 13:20:28> Set timezone
<OM Oct 11 13:20:28> Timezone setting will be TZ=UTC
<OM Oct 11 13:20:28> Set timezone
<OM Oct 11 13:21:01> disk partition info changed
<OM Oct 11 10:21:14> Timezone setting will be TZ=Europe
<OM Oct 11 10:21:14> Set timezone
<OM Oct 11 10:22:05> Set user root in password and shadow file
<OM Oct 11 10:22:05> Set user naskoo in password and shadow file
<OM Oct 11 10:22:05> Renaming table /etc/inet/AAAm7a4Jb to /etc/inet/hosts
<OM Oct 11 10:22:05> Disk was changed
<OM Oct 11 10:22:05> Disk contains valid Solaris partition
<OM Oct 11 10:22:05> whole_disk = 0
<OM Oct 11 10:22:05> diskname set = c3d0
<OM Oct 11 10:22:05> Set fdisk attrs
<TIDM_E Oct 11 10:22:05> fdisk: fdisk -n -F failed. Couldn't create fdisk partition table on disk c3d0
<TIMM_E Oct 11 10:22:05> Couldn't create fdisk partition table on disk <c3d0>
<OM Oct 11 10:22:05> Could not create fdisk target
<OM Oct 11 10:22:05> TI process completed unsuccessfully
<OM Oct 11 10:22:05> ti_create_target exited with status = -1
<OM Oct 11 10:22:05> Target instantiation failed exit_val=-1
I have a separate partition for the solaris installation (35 GB, linux-swap, primary)
I have no idea why i cannot start the installation process ?!
Thank in advance for the help!

Hi all,
I am facing the same problem when I try to install oracle 10g under fedora 9
But after work around arrive to change the file which include the line the oracle check it during the installation which include fedora 9
Remove this line and run installation again after complete the installation
Restore the original file again and all thing working normally
But I don’t know if the action can be done on unix opensolaris or not
Thanks in advance

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

9i installation problem on Fedora 5

Similar Messages

Maybe you are looking for