9iAS installation problem--not the same user

I had once interrupted my 9iAS installation, when I start installation again, OUI reports lack of query component. I tried to install it in a new oracle home path, aborted the installation, and copy the inventory folder to the original oracle home path. Then I install oracle in the original oracle home again, OUI gives error message of "All oracle9iAS in one host must be installed by the same user". How can I bypass this message and install 9iAS?

I just had that too. I deleted all Oracle installed directories (app server install directory and Program Files\Oracle) then deleted the registry key HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and that problem goes away....

Similar Messages

Another Safari display problem - not the same as others

Hello,
Has anyone seen this happen and know what is going on? This affects both Safari and Explorer but doesn't affect Camino or other browsers.
Thanks.
Powerbook G4 Mac OS X (10.4.4)

Unfortunately it does not solve the problem. Anyway, this can't be just related to Safari cache as it seems to affect IE too. (Not that I'm using IE). On top of that, if I create a brand new user and go try it, it still looks the same. I doubt a brand new user would have a cache problem since there is no cache for that user yet!!
Is this exactly the kind of thing you saw with your problem? I wish your solution worked. For now, I've switched to using FireFox instead, but I'm nervous that this Safari behavior is just a pre-amble of something else that is wrong with my system.
Thanks ... anyone else?
Powerbook G4 Mac OS X (10.4.3)

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Firefox will not run for mulitple instances of the SAME user account on Windows Multipoint Server 2011

We have an HP MS6200 MulitSeat PC
It is running Microsoft Windows MultiPoint Server 2011 (which appears to be a tweaked version of Windows 7)
It is set up in a computer lab, and students log in using their shared room account - ie multiple instances of the same user accounts are running on the PC at the same time.
The first student to run Firefox can work with it without problem.
However when another student tries to start firefox they get the following message:
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Thanks for the quick reply.
I managed to get this to work by using:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -profile "%temp%\ffprof" -no-remote
This works because Windows assigns a different temp location for each instance of a user
Thanks for your help

Safari logs me out of logged in web pages - not the same problem as other similar post - please read.

Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
Here is my machine info.
iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
Safari Version 5.1.7
I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
Any help or advice is apprecaited.

BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
The time it happened was sometime between 14:30 and 14:35
I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G

SAP netweaver developer studio installation error: JDK is not the same as J

Now i plan to create a java proxy.
but when i install NWDS 7.1, the error show like this:
JVM Version Check failed.
Your JVM is not supported.
Current JVM:
Sun Microsystems Inc. JDK 1.6.0_10-rc2
java.home = C:\Program Files\Java\jdk1.6.0_10\jre
Supported JVMs:
SAP AG JDK: java.version 1.5.0_06 or later
Sun Microsystems Inc. JDK: java.version 1.5.0_06 or later
Note, JDK is not the same as JRE. If JDK is required, JRE is not sufficient.
how to resolve problem?
thank you

1.7 does not work
JVM Version Check failed.
Your JVM is not supported.
Current JVM:
    Sun Microsystems Inc. JDK 1.7.0-ea
    java.home = C:\Program Files\Java\jdk1.7.0\jre
Supported JVMs:
    SAP AG JDK: java.version 1.5.0_06 or later
    Sun Microsystems Inc. JDK: java.version 1.5.0_06 or later
Note, JDK is not the same as JRE. If JDK is required, JRE is not sufficient.

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

Good day Sidharth Namrta,
It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
iPhone: Troubleshooting issues making or receiving calls
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer, and so as my password consists of numbers, letters and symbols my ipad keeps showing that my password is incorrect! Is there any way around this problem please?

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?

katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character?

TS1459 Win 7 , itunes store will not accept Apple ID, on the diagnostic program says secure link failed spoke to tec.dept they say Win security problem ,, turned all off problem still the same any ideas please

TRYING TO AUTHORIZE MY COMPUTER>>>>>>>on the diagnostic program says secure link failed spoke to tec.dept they say it's a Win security problem ,, turned all off problem still the same any ideas please Ipad ,
(((Strange thing is Apple want me to purchase assistance to enable me to buy from thier store)))

You should send this to Apple.

Can't install Exchange 2013 after previous uninstall (insufficient user privileges with the same user)

I have installed Exchange 2013 on Windows Server 2012, which ist a member of a Windows Server 2012 R2 Domain. All prerequisites and AD modifications were successfully completed and I could install Exchange 2013. Unfortunately I made a mistake with
the target directory and had to uninstal Exchange 2013. If I start the Setup again, it fails in prerequisite check - the current user should not be a member of Enterprise and Schema admin Group, but it's the same user, which comleted the previous Installation
of Exchange 2013! Do you have any idea how to solve this Problem - I'm running out of ideas.

Inhave tried to run setup /PrepareSchema again and get the following error in exchange setup log:
[03.07.2014 19:25:53.0305] [0] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
[03.07.2014 19:25:53.0337] [0] Validating options for the 0 requested roles
[03.07.2014 19:25:53.0383] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
[03.07.2014 19:25:53.0399] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
After removing all Exchange Parts by ADUC (advanced View) and ADSI Edit (Services) I'm able to install Exchnge 2013 again - the uninstall procedure seems not to work in a clean manner.

My exported edited image in TIFF-16bit is not the same as my edited RAWfile

Hi! First and foremost my problem is not speed. I have learn to deal with Aperture's slowness while editing or exporting images and not real time brush strokes and occassional crashes. It thought me PATIENCE!
My problem are my exported image from Aperture, The images are not rendered the same exact way as the RAW image I edited (quality-sharpness-saturation-definition-etc.) in Aperture. The rendering is WAY OFF. I even exaggerate in Sharpness and contrast in rendering my RAW images yet my exported (both TIFF -16 bit or JPEG orig. size) are way softer than the one I originally rendered in RAW at Aperture 3.0.2. Even the COLORS are OFF-saturation, luminance, etc. It's not my Monitor or my Eyes, I asked 3 friends to help me validate my concern. After viewing my exported (TIFF or Jpeg) images on an external preview browser, I re-import them to Aperture and put them- (the exported images) in the same Projects where the Original RAW file is located, then I carefully compare them in Full Screen view, I can totally say that they're not the same quality, sharpness, saturation, tonal value!
It's very frustrating to experience this. I work really hard on every single image, I tolerate the sluggishness, the crashes, All I want are my image output render the way I rendered them in RAW file in regards to sharpness, color value and just the overall look that I wanted in my images. BTW I just downloaded the recent March 22, 2011 update. But still it's still having this problem.
Please help me all you good knowledgable, compassionate Aperture experts help an Aperture user in distress.
Thanks for your time. I appreciate any positive feedback and help.
JC

Richard,
You are not going crazy, this is a well documented throughout the web
Sorry, but the web is not documentation for Aperture.
I cannot understand why Apple have not resolved this
For one, it takes time to fix a bug, and the have to know about it. Have you told Apple that this is a problem through Aperture feedback? Second, someone at Aperture has to prioritize what their engineers work on. Since this does not seem to be a problem for very many people (including the well-regarded contributors whom you were trying to offend in your other post on this topic), it may turn out that it has a low priority for Apple.
Please Apple sort this out!
Apple does not contribute to this forum and there's no reason to believe they will read this particular message and make a bug report.
nathan

Why are my iCal events not the same across views?

Help! I've been editing my iCal in Month view and everything looks great... but then I look at the day view (or week, whatever) and it's not the same. For example, in Month view for July 2 - I have one event scheduled from 8:30-noon. Then I look at the day view... and there are 8 different events! Most of them duplicates of different things that I had at one time or another deleted or changed. Why didn't the "clean up" work that I did in the month view carry over to day or week view? In fact the opposite, there are more things in day or week views than I ever created.
Recently upgraded to Lion from Snow Leopard. Recently changed from mobileme to iCloud. I only have iCal set to my iCloud account (no "on my mac" iCal calendar data). So the problem I see when editing on my MacBookPro is also seen when logged into iCloud directly via Safari and on my iPhone, iPad, etc. At first I thought this was an iCloud syncing error because I only noticed the difference on my phone (list view)... but when I went back to my MacBookPro I realized the problem exists there too... so doesn't seem to be a syncing error, but rather a "view" error... then the "problem" is mirrored everywhere.
I've tried "refresh" and "refresh all" from the Calendar drop down menu. This does nothing to help the problem... not that I really expected it would.
Thanks for any help you can provide. I'm going crazy!
Mac OS X 10.7.4; iCal 5.0.3

Fixed my own problem. Ultamately a user error but tied to the many threads about the month view defaulting events to "all day" vs. hourly increment. I knew that was the case, so when editing events from month view I made sure to add/change the time, but negected to look at "To" date. If my event was for an hour, simply adding the hour pushed the day to span across dates so the event was really 25 hours. Looked OK in the month view (just showed as a dot) but the day and week were all filled and casued the event to appear twice on the second day in list view (iPhone). In the case of repeat events, sometimes "To" date ended up as the end date for the repeat cycle... which really messed every thing up... I believe causing what looked like duplicates, etc.

9iAS installation problem--not the same user

Similar Messages

Maybe you are looking for