A caller 01, 02 or equal to or greater than 20 contains an error meesage.

Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Update
Update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Hi Experts,
My master data load is getting failed often.
I have some special characters, space, caps, lower caps etcs in my data and thos it fails.
I tried including ALL_CAPITAL sometime and also ALL_CAPITAL_PLUS_HEX
I also crossed check at SE16 > RSALLOWEDCHAR everything seems to be fine but still i get this error.
Please help me to some solution.
Thanks

You can edit them in PSA  for the moment and upload
ALL_CAPITAL - May not handle all the spl char
If the problem is very often I would suggest to check the blogs in forum on this topic
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Edited by: Srinivas on Sep 14, 2010 12:39 PM

Similar Messages

  • About JDBC CALL STORE PROCEDURE with out parameter is greater than 4000

    Hi Guys,
    I have a problem call store procedure with a large string.
    as i know varchar2 can contain 32767 characters in pl/sql .
    But when i used varchar2 as a out parameter in a store procedure, if the out parameter is greater than 4000 characters , it always give me error message as 'the buffer is too small'.
    why it happened?
    I read some article that says i need configure a property in data-source.xml , and jdbc 10g driver already solved this problem, but i used jdev 10.1.3.2 ,the driver should be fine.
    How can i solve this problem?
    Thanks in advance,
    AppCat

    Object is Foundation, Execute Script
    This is for a query, you can change to a stored procedure call. Pull the value back in the Java code then put into the process variable.
    import javax.naming.InitialContext;
    import javax.sql.DataSource;
    import java.sql.*;
    PreparedStatement stmt = null;
    Connection conn = null;
    ResultSet rs = null;
    try {
    InitialContext ctx = new InitialContext();
    DataSource ds = (DataSource) ctx.lookup("java:IDP_DS");
    conn = ds.getConnection();
    stmt = conn.prepareStatement("select FUBAR from TB_PT_FUBAR where PROCESS_INSTANCE_ID=?");
    stmt.setLong(1, patExecContext.getProcessDataLongValue("/process_data/@inputID"));
    rs = stmt.executeQuery();
    rs.next();
    patExecContext.setProcessDataStringValue("/process_data/outData", rs.getString(1));
    } finally {
    try {
    rs.close();
    } catch (Exception rse) {}
    try {
    stmt.close();
    } catch (Exception sse) {}
    try {
    conn.close();
    } catch (Exception cse) {}

  • UserManager's Create, CreateAsync and FindAsync methods giving "Incorrect number of arguments for call to method Boolean Equals(...)"

    I've made custom User and UserStore classes.
    Now I'm trying to register or login with a user, but I get the error
    'Incorrect number of arguments supplied for call to method Boolean Equals(System.String, System.String, System.StringComparison)'
    The error is on line 411:
    Line 409: }
    Line 410: var user = new User() { UserName = model.Email, Email = model.Email };
    --> Line 411: IdentityResult result = await UserManager.CreateAsync(user);
    Line 412: if (result.Succeeded)
    Line 413: {
    The problem is that I can't really debug UserManager's methods, because it is in a closed DLL.
    I get this same error on
    UserManager.FindAsync(user), UserManager.CreateAsync(user,password), UserManager.Create(User user)
    Now the error doesn't occur when I log in with an External Login, like Google, which also uses methods from UserManager. Entering the email works
    as well, but when the user has to be created from an External Login with the inserted email, it gives the CreateAsync error
    too.
    How can I fix this? Do I need to create my own UserManager? Or do I need another solution entirely?
    Packages (relevant):
    package id="Microsoft.AspNet.Mvc" version="5.1.2"
    id="Microsoft.Owin" version="2.1.0"
    id="Microsoft.AspNet.Identity.Core" version="2.0.1"
    UserStore.cs
    public class UserStore :
    IUserStore<User, int>,
    IUserPasswordStore<User, int>,
    IUserSecurityStampStore<User, int>,
    IUserEmailStore<User, int>,
    IUserLoginStore<User, int>
    private readonly NFCMSDbContext _db;
    public UserStore(NFCMSDbContext db)
    _db = db;
    public UserStore()
    _db = new NFCMSDbContext();
    #region IUserStore
    public Task CreateAsync(User user)
    if (user == null)
    throw new ArgumentNullException("user");
    _db.Users.Add(user);
    _db.Configuration.ValidateOnSaveEnabled = false;
    return _db.SaveChangesAsync();
    public Task DeleteAsync(User user)
    if (user == null)
    throw new ArgumentNullException("user");
    _db.Users.Remove(user);
    _db.Configuration.ValidateOnSaveEnabled = false;
    return _db.SaveChangesAsync();
    public Task<User> FindByIdAsync(int userId = 0)
    int userid;
    if (userId == 0)
    throw new ArgumentNullException("userId");
    return _db.Users.Where(u => u.UserId == userId).FirstOrDefaultAsync();
    User.cs
    public class User : IUser<int>
    public User()
    UserLogins = new List<UserLogin>();
    public int UserId { get; set; }
    public string UserName { get; set; }
    public string PasswordHash { get; set; }
    public string SecurityStamp { get; set; }
    public string Email {get; set; }
    public bool IsEmailConfirmed { get; set; }
    int IUser<int>.Id
    get { return UserId; }
    public ICollection<UserLogin> UserLogins { get; private set; }
    public async Task<ClaimsIdentity> GenerateUserIdentityAsync(UserManager<User, int> manager)
    // Note the authenticationType must match the one defined in CookieAuthenticationOptions.AuthenticationType
    var userIdentity = await manager.CreateIdentityAsync(this, DefaultAuthenticationTypes.ApplicationCookie);
    // Add custom user claims here
    return userIdentity;
    Startup.Auth.cs
    public partial class Startup
    // For more information on configuring authentication, please visit http://go.microsoft.com/fwlink/?LinkId=301864
    public void ConfigureAuth(IAppBuilder app)
    // Configure the db context and user manager to use a single instance per request
    app.CreatePerOwinContext(NFCMSDbContext.Create);
    app.CreatePerOwinContext<ApplicationUserManager>(ApplicationUserManager.Create);
    // Enable the application to use a cookie to store information for the signed in user
    // and to use a cookie to temporarily store information about a user logging in with a third party login provider
    // Configure the sign in cookie
    app.UseCookieAuthentication(new CookieAuthenticationOptions
    AuthenticationType = DefaultAuthenticationTypes.ApplicationCookie,
    LoginPath = new PathString("/Account/Login"),
    Provider = new CookieAuthenticationProvider
    OnValidateIdentity = SecurityStampValidator.OnValidateIdentity<ApplicationUserManager, User, int>(
    validateInterval: TimeSpan.FromMinutes(20),
    regenerateIdentityCallback: (manager, user) => user.GenerateUserIdentityAsync(manager),
    getUserIdCallback: (id) => (Int32.Parse(id.GetUserId())))
    // Use a cookie to temporarily store information about a user logging in with a third party login provider
    app.UseExternalSignInCookie(DefaultAuthenticationTypes.ExternalCookie); (...)
    Any help or ideas are greatly appreciated!
    Kind regards,
    Nils

    Hi,
    According to your description, I am afraid your problem is out of support in C# forum. For ASP.NET question, please go to
    ASP.NET Forum to post your thread.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to &quot;Mark as Answer&quot; the responses that resolved your issue. It is a common way to recognize those who have helped you, and
    makes it easier for other visitors to find the resolution later.

  • Change "to equal" to "to be greater than" in Wait for Field to equal Value"

    In Sharepoint Designer 2010, in the workflow Action "Wait for Field to equal Value", I could change the "to equal" to "to be greater than". I can't find how to do this in SPD 2013.
    Can someone please help?
    Thank you!

    Hi
    PieterVanHeerden, is a big problem that gives us the change Microsoft . An option to mitigate this problem could be to use an additional workflow that runs whenever the item is updated . Workflow evaluate the condition that you need and when it is Ok, updates
    the value of a field used as flag called eg " Control_Hora_Inicio_Completo " with " true " value.
    In your current workflow you should modify the condition for the WorkflowF stops until the Control_Hora_Inicio_Completo field equal to " True " when it meets the Workflow continue and you're sure you have entered a value , whatever that is .
    I hope you can try and you work.
    Greetings from Argentina .
    Maxi
    Msorli

  • The code segment cannot be greater than or equal to 64K. - Windows 8

    Hello,
    I am having an issue on some windows 8 systems, a crash occurs in NtSetEvent, the exception thrown is "0x000000C8: The code segment cannot be greater than or equal to 64K.".
    This crash only occurs on Windows 8.
    The callstack doesn't help much
        KERNELBASE.dll!_RaiseException@16()    Unknown
        ntdll.dll!_NtSetEvent@8()    Unknown
        kernel32.dll!@BaseThreadInitThunk@12()    Unknown
        ntdll.dll!__RtlUserThreadStart()    Unknown
        ntdll.dll!__RtlUserThreadStart@8()    Unknown
    Could it be a bug within windows 8 ? If not what steps should I take to find the cause of this crash ?
    Thank you,
    Max

    I have a feeling like you have corrupted something.  Likely by stomping on memory due to a bug in your program such as a buffer overrun or use of a deleted object in C++.
    Although you may have incurred corruption to your registry through a variety of means, not limited to bad disk drives, or the unintentional write of bad data due to a bug in your program, if you are experiencing this on multiple systems, then registry corruption
    is less likely.  Which brings me back to the idea that you have a bug in your code that has trashed memory somehow.
    The stack traces and error codes do not indicate the cause of the problem.
    What does your program do??
    Without seeing at least some of the code, or knowing how big the scope of the code is, it's not useful for me to start guessing specifics of what may have happened.  But since you're not disclosing anything at all about your code apart from your exception,
    I'm forced to do some guesswork and just give general advice.
    Here are some easy classical strategies for locating the cause of the problem:
    Build your code in debug mode and run your code in the debugger.  (Yes, some people need to be told this.)
    Bisect the problem through revision control.  Back up to when the problem didn't happen and find the last revision that causes the problem.  (If you're not using a revision control system, start now.)
    Bisect the problem by eliminating chunks of code.  Trim out functionality until the problem goes away.
    Write unit tests.  Test the various pieces of your program to eliminate bugs.  At the very least, make use of assertions.
    Have a look at what your program is DOING when the crash happens.  Certainly there must be a cause.  Try to isolate the problem by associating it with a certain activity in your program.  Gate off functionality by introducing places where
    your program waits before proceeding.  At some point, you'll pass a point where the error can now occur.
    Run code analysis on your project and see if it comes up with any possible culprits.
    Don't ignore compiler warnings, they often indicate something that can turn into a bigger problem.  Compile at the highest warning level.
    Look at your usage of various API functions for logical mistakes.  Here are some examples:
    When using third party libraries or SDKs, have you initialized libraries appropriately?  Have you called all the appropriate initialization functions and used the APIs as intended?  Read documentation and make sure you are using calls appropriately.
    For functions that take a HANDLE, such as SetEvent, are you passing a valid handle?  Have you closed the handle but kept the old handle value around?
    When storing pointers to objects, have you accidentally deleted an object but kept its pointer around, only to make use of the pointer at a later time in your program?  This is particularly harmful when performing a write operation as you can corrupt
    just about anything.
    Are you using variables without giving them an initial value?  You may get unexpected values for variables if you do not initialize them.  This is particularly important for stack variables.
    When using arrays or string buffers, have you allocated enough storage for the bytes you are writing?  C++ doesn't detect reading or writing with an invalid array index as a problem.  It happily reads or writes past the end of your intended
    storage.  Such offences are called "buffer overruns".
    When multi-threading, are you taking steps to ensure data integrity?  Unsynchronized access to data from multiple threads is a notorious cause of strange and difficult to reproduce bugs.  Your data passes through states that you may not expect
    that can be observed by unsynchronized threads.  Use locking mechanisms appropriately and marshal your data diligently.
    Are you relying on valid input from an external source beyond your control such as a network client, database, or file?  Diligently validate all input that comes from an external source.  Be prepared for any situation that you can't control at
    compile time.
    Are you ignoring error codes?  Some functions may fail, but you may be assuming they have succeeded and then gone on to use invalid data.
    Look for mathematical errors.  Calculation of indices of arrays are a notorious culprit.  Beware of off by one errors.  Indices start at zero and go up to N-1, where N is the number of elements in the array.
    Beware of sentinel values.  Some functions such as "IndexOf" will return an index of -1 when not found and can result in a miscalculation of an actual index.
    Are you making use of
    RAII techniques in your code?  Failing to correctly allocate and deallocate resources can cause problems.
    Are you making use of unsafe casts?  C-Style casts say "I know what I'm doing", and you can get into dangerous situations.  Prefer static_cast<> over a C-Style cast wherever possible.
    Also look at your project settings for problems
    Have you accidentally mixed incompatible compiler settings between components?
    Approach debugging with an open mind.  Mark Twain said, "It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."

  • 'job_queue_processes' must be greater than or equal 1

    Hello,
    I am trying to install Oracle 10g on Windows 7 but at the end it displays following error:
    Enterprise Manager Configuration Failed due to the following error:
    'job_queue_processes' must be greater than or equal 1. Fix the error(s) and run EM configuration assistant again in standard mode.......[b]
    Best regards

    Windows 7 Home Basic and Oracle 10.1.0
    Mar 31, 2011 8:25:30 PM oracle.sysman.emcp.EMConfig setConsoleLogging
    CONFIG: consoleLogging value set to: true
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig setUpdateEMDEmail
    CONFIG: updateEMDEmail value set to: false
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig setAutomaticBackup
    CONFIG: automaticBackup value set to: false
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig setSkipRepos
    CONFIG: skipRepos value set to: true
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig perform
    CONFIG: Passed parameter check
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: c:\oracle\product\10.1.0\db_1, and user: SYS
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig initSQLEngine
    CONFIG: ORA-12546: TNS:permission denied
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12546: TNS:permission denied
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1403)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:762)
         at oracle.sysman.emcp.EMConfig.initSQLEngine(EMConfig.java:5451)
         at oracle.sysman.emcp.EMConfig.checkConfiguration(EMConfig.java:966)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:251)
         at oracle.sysman.assistants.dbca.backend.EMConfiguration.run(EMConfiguration.java:305)
         at java.lang.Thread.run(Thread.java:534)
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig checkConfiguration
    CONFIG: null
    java.lang.NullPointerException
         at oracle.sysman.emcp.EMConfig.checkConfiguration(EMConfig.java:994)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:251)
         at oracle.sysman.assistants.dbca.backend.EMConfiguration.run(EMConfiguration.java:305)
         at java.lang.Thread.run(Thread.java:534)
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig checkConfiguration
    WARNING: 'shared_pool_size' must be greater than or equal to 80 MB. 
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig checkConfiguration
    CONFIG: null
    java.lang.NullPointerException
         at oracle.sysman.emcp.EMConfig.checkConfiguration(EMConfig.java:1023)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:251)
         at oracle.sysman.assistants.dbca.backend.EMConfiguration.run(EMConfiguration.java:305)
         at java.lang.Thread.run(Thread.java:534)
    Mar 31, 2011 8:25:31 PM oracle.sysman.emcp.EMConfig checkConfiguration
    SEVERE: 'job_queue_processes' must be greater than or equal to 1.  Fix the error(s) and run EM Configuration Assistant again in standalone mode.
    Mar 31, 2011 8:25:47 PM oracle.sysman.emcp.EMConfig finalize
    CONFIG: finalize() called for EMConfig
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setConsoleLogging
    CONFIG: consoleLogging value set to: true
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setUnlockAccounts
    CONFIG: unlockAccounts value set to: true
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setIsClusterConfig
    CONFIG: isClusterConfig value set to: false
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setSkipRepos
    CONFIG: skipRepos value set to: false
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setUpdateEMDEmail
    CONFIG: updateEMDEmail value set to: true
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setStoreReposVars
    CONFIG: storeReposVars value set to: true
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setUsesASM
    CONFIG: usesASM value set to: false
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setAutomaticBackup
    CONFIG: automaticBackup value set to: false
    Mar 31, 2011 10:52:05 PM oracle.sysman.emcp.EMConfig setIsCentralMode
    CONFIG: isCentralMode value set to: falseThanks

  • How to use (greater than) in web services call

    Hello, I am trying to query a set of assets where the external unique ID is greater than 400,000. My existing code looks like
    qryIn.ListOfAsset(0).ExternalSystemId = ">'400000'"
    However, using this will return any asset record starting with a 5 or above as far as I can tell, I assume b/c it is comparing string data due to the single quotes infering data of type text (string). Is it possible to use comparison operators with numeric data correctly?
    I posed this question to support and received the below answer:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Body> <AssetWS_AssetQueryPage_Input xmlns="urn:crmondemand/ws/asset/"> <ListOfAsset xmlns="urn:/crmondemand/xml/asset"> <Asset> <AssetId /> <PurchaseDate/> <OwnerAccountId /> <ExternalSystemId>&gt; '400000'</ExternalSystemId> </Asset> </ListOfAsset> </AssetWS_AssetQueryPage_Input> </soap:Body> </soap:Envelope>
    Basically, instructing me to use &gt. I'm doing coding in .NET visual studio and not using the XML as above. However, I did try the following:
    qryIn.ListOfAsset(0).ExternalSystemId = "&gt;'400000'" which returned an error in the compiler.
    Any help would be appreciated. Thanks.

    Thanks for the reply. I would assume "external system id" is an integer, but, I will test on a custom field that I now is of type integer.
    Could you take your same code and use a non-zero value for the operand? For example, could you try
    objAccQryParam.ListOfAccount[0].CustomInteger0 = ">= '10'"; and let me know if that returns values that are greater than or equal to 10. Using a two digit number is important. Assuming you have data greater than 10.
    Thanks!

  • Error message from the source system, Caller 09 contains an error message.

    Hi,
        Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.   "
    Can any body help me out of this situation what to do and how to resolv ethe problem.
    Thanks and Regards,.
    Taps....

    Caller 09 is a very common issue - please search the forums before posting....
    Arun

  • Calling a CAF program via web service generates QName cannot be null error, but only for 1/5 of the same call in a parallel for loop.

    I'm calling 5 identical web service calls using a parallel for loop in BPM. Obviously the data in each slightly differs. Why would this call suspend the process and give the following errors:
    handleCommunicationError( ErrorContextData, Throwable, TransitionTicket ): A technical error occurred.
    Interface namespace = myNamespace
    Interface name = myService
    Operation name = myOperation
    Connectivity type = WS
    Application name = myAppName
    Reference name = 8bd95deb-8cf1-453d-94e5-0576bb385149
    Message Id = null
    WS style = DOC
    Start time of WS call = 2014-02-26 17:51:23.297
    Return time of WS call = 2014-02-26 17:51:23.412
    Principal name = SAP_BPM_Service
    Root error message = local part cannot be "null" when creating a QName
    Error message = Could not invoke service reference name 8bd95deb-8cf1-453d-94e5-0576bb385149, component name myComp application name myappname
    com.sap.engine.interfaces.sca.exception.SCADASException: Could not invoke service reference name 8bd95deb-8cf1-453d-94e5-0576bb385149, component name
    myCompname
    at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:341)
    at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:101)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallObject.invokeWebServiceOperation(UnifiedWebServiceCallObject.java:101)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallClass.invoke(UnifiedWebServiceCallClass.java:178)
    at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:657)
    at com.sap.glx.core.kernel.trigger.config.Script$MethodInvocation.execute(Script.java:248)
    at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:798)
    at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:78)
    at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:196)
    at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:163)
    at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
    at com.sap.glx.core.resource.impl.j2ee.J2EEResourceImpl$Sessionizer.run(J2EEResourceImpl.java:261)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:152)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Subject.java:337)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:149)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:185)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:302)
    Caused by: java.lang.IllegalArgumentException: Could not process message for operation myOperation in web service plugin module.
    at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.accept(WebServiceImplementationInstance.java:228)
    at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:314)
    ... 19 more
    Caused by: java.lang.IllegalArgumentException: local part cannot be "null" when creating a QName
    at javax.xml.namespace.QName.<init>(QName.java:246)
    at javax.xml.namespace.QName.<init>(QName.java:190)
    at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceImpl.getInterfaceInvoker(DInterfaceImpl.java:126)
    at com.sap.engine.services.webservices.espbase.wsdas.impl.WSDASImpl.<init>(WSDASImpl.java:43)
    at com.sap.engine.services.webservices.espbase.wsdas.impl.WSDASFactoryImpl.createWSDAS(WSDASFactoryImpl.java:39)
    at com.sap.engine.services.sca.plugins.ws.tools.wsdas.WsdasFactoryWrapper.createWsdas(WsdasFactoryWrapper.java:30)
    at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.initWsdas(WebServiceImplementationInstance.java:256)
    at com.sap.
    Surely if it was the service group unassign then reassign issue then none of the calls would have worked?

    Hi David,
    While a random error is still an error it will be difficult for support to find a problem for an error which is not reproducible. It is always a faster resolution if you can determine how to provoke the error and provide those details. If we can reproduce an error on internal systems then we can fix the problem quickly and without having to access your system.
    regards, Nick

  • How do I disallow negative numbers in a selected group of cells (i.e. only allow values greater than or equal to zero)?

    I have a table of calculated values in Numbers, and I want to disallow negative numbers in the entire table. Any numbers that would be negative I would like changed to/displayed as zeroes, that way future calculations that may be based on this cell use the value of 0 for the calculation rather than the negative value. I have seen ways of doing this to single cells at a time, but I am interested in applying it to a large selection of cells.
    There is the Conditional Format option when you bring up the inspector, but I cannot get a custom rule to work for me. I select "Greater than or equal to" and I enter 0 in the box, but nothing changes. Can anyone help with this?
    Thanks

    A step toward simplifying the application of MAX to the issue, Jerry.
    This part, though:
    Now apply your long, animal-modeling, expressions to this new, interposing, table rather than the original.
    may still leave several references to be change from the original data table to the new one.
    One way to get around that is to use the Duplicate ("DATA-1) as the new table for raw data, and the Original (DATA) as the interposing table, using the formula =MAX(DATA-1::A2) as above, starting in DATA::A2.
    This way, the long expressions could continue to reference the original table (with its content now modified).
    ALTERNATE process:
    Find/Replace could also be used to speed the process of reassigning the modeling expressions to the duplicate table, as suggested by Jerry. But some cautions apply here.
    Find/Replace can be limited to Formulas only, but not to Some formulas only.
    Find/Replace can be limited to the Current Sheet only, but this can't be combined with Formulas only.
    More on this later, when I've had a chance to check some possibilities.
    Regards,
    Barry

  • Greater than or equal symbol not working

    Hi,
    I cannot get the "greater than or equal to" symbol to display properly. I can get the less than or equal symbol to display by typing Ctrl+q #, and then formatting it as Symbol font.
    According to the Character_Sets.pdf FrameMaker Online reference, the greaterequal symbol is Ctrl+q 3, but when I format it as Symbol, FrameMaker displays a box (which looks to me to be a non-printing character).
    Any suggestions on how I get a "greater than or equal to" symbol to display?
    Thanks,
    John B.
    FrameMaker 8 (8.0 p277)
    Windows XP SP 3

    Error7103 wrote:
    > I cannot get the "greater than or equal to" symbol to display properly.
    Try this...
    Click in margin.
    Format > Characters > Designer...
    Character Tag: [ Symbol ]
    Family: [ Symbol ]
    all else As Is or blank
    Commands: New Format...
    [*] Store in Catalog
    Click in Body Flow A.
    Special > Variable...
    [Create Variable]
    Name: [ char.symbol.greaterequal ]
    Definition: [ <Symbol>\xb3 ]
    [Add]
    [Done]
    [Insert]
    Advantages:
    Avoid frequent arcane typing: you only need to look up the special character entry sequence once per document (if that - we keep these var defs in a separate catalog for ease of application).
    Isolates special char encodings for dealing with eventual replacement by native Unicode glyphs and/or ports to platforms lacking legacy Symbol overlay font
    Isolates special char renderings for possible changes to font with native >= glyph
    Assures text inserted adjacent to symbol will be in native paragraph font, and not Symbol.
    Prevents spell checker from needlessly complaining.
    Is portable between FM platforms and releases, although \xb3 does appear as Š (cap s caron above) in Windows dialogs.
    Disadvantages:
    If you apply a Default ¶ Font to the para, the variable is no longer in Symbol font (but this is always the case for variables that use alternate fonts). You have to re-select the var (which may be hard to even see), and re-insert it.
    If you highlight the entire para, or just the text containing the var, and apply a new PgfTag, the variable likewise gets de-fonted. It has ever been thus.
    You have to search by Variable, and not by special character.
    So what do we suppose made this topic so popular that it's got over 1000 Views so far?
    I tried these instructions with great anticipation, but alas, it did not work for me.
    Maybe it works differently on FrameMaker 9. I even tried making a PDF to see if it just rendered differently on the screen, since you mentioned the display in Windows dialog boxes (even though I was just in the main flow).
    See the screenshot below for my results.

  • "Caller 09 contains an error message "in Process chain

    Hi
    Most of my process chains have failed today.All are showing the same error i.e
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    If I am repeating the process it is showing the same error again
    Please help

    Hi,
    Even I got the same problem. All you need to do is:
    1) Go to Infopackage
    2) Update Tab:
        Choose: Initialize Delta process
            under that choose: Initialization with Data Transfer
    3) Save
    4) Go to Schedule Tab:
    5) Start the Load
    6) Refresh the page: /nRSA1
    7) Once it is done, then again go to the Update tab of the Infopackage
    8) Select Delta Update
    9) Save
    And now run the Process Chain.
    You should be able to run it smoothly.
    Thanks & Regards
    Hemendra Sharma

  • Greater than is giving me equal to's

    So I'm writing a procedure in PL/SQL that has the logic below:
    SELECT
    FROM
    WHERE
        CASE
            WHEN travel_time IS NULL THEN NULL
            WHEN travel_time = 0       THEN NULL
            ELSE miles/(travel_time/60)
        END >
        CASE
            WHEN (SUBSTR(id, 2, 3) BETWEEN '099' AND '200')
                THEN 60
            ELSE 45
        END;In the result set, I'm getting records where the result of the first and second case statement are both 60.
    So basically, if the result of the first case statement is GREATER THAN the result of the second case statement, the record is supposed to show up, but I'm getting records that are GREATER THAN OR EQUAL TO. I'm sure I could just change the second case statement to give 61 rather than 60, and I'm sure it would work. But shouldn't this logic work without having to do that?
    Thanks!
    Edited by: jjmiller on Mar 26, 2010 7:24 AM

    As Frank said, a small test case (with CREATE TABLE and INSERTs) would help.
    Works for me.
    SQL> select * from v$version ;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE     10.2.0.4.0     Production
    TNS for Solaris: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    SQL> create table travel(id varchar2(3), miles number, travel_time number) ;
    Table created.
    SQL> insert into travel values (1, 10, 10) ;
    1 row created.
    SQL> insert into travel values (2, 60, 10) ;
    1 row created.
    SQL> insert into travel values (3, 46, 10) ;
    1 row created.
    SQL> insert into travel values (4, 60, null) ;
    1 row created.
    SQL> commit ;
    Commit complete.
    SQL> select * from travel ;
    ID       MILES TRAVEL_TIME
    1         10            10
    2         60            10
    3         46            10
    4         60
    SQL> select id, miles, travel_time, case when travel_time is null then null when travel_time = 0 then null else miles/(travel_time/60) end cmp1, case when id between '1' and '4' then 60 else 45 end cmp2 from travel ;
    ID       MILES TRAVEL_TIME       CMP1       CMP2
    1           10          10         60         60
    2           60          10        360         60
    3           46          10        276         60
    4          600                                60
    SQL> select * from travel where case when travel_time is null then null when travel_time = 0 then null else miles/(travel_time/60) end > case when id between '1' and '4' then 60 else 45 end ;
    ID       MILES TRAVEL_TIME
    2           60          10
    3           46          10

  • Greater than or equal to

    Hi everyone. I have what I think is a simple query (see
    below) that pulls date information from a table. As you can see
    from the query, I want it to pull dates for anything greater than
    and equal to today's date and anything less than and equal to a
    date one week from today's date.
    This works, however, CF does not output any events on today's
    date; it begins outputting tomorrow's events. Can someone point me
    in the right direction as how to fix this so dates for today are
    output as well? Thanks!

    For the "up through day" portion, I truncate the time component off of now(), add a day, and then use only the less than comparison. Example:
         <cfset variables.dt1 = dateAdd("d",1,int(now())) />
         <cfset variables.dt2 = dateAdd("d",-8,variables.dt1) />
         <p>dt1 = #variables.dt1# / dt2 = #variables.dt2#</p>
    This results into:
         dt1 = {ts '2013-09-28 00:00:00'} / dt2 = {ts '2013-09-20 00:00:00'}
    Lastly, use the results in your query comparison:
         where
              [someDateField] < <cfqueryparam value="#variables.dt1#" cfsqltype="CF_SQL_DATE" />
              and [someDateField] >= <cfqueryparam value="#variables.dt2#" cfsqltype="CF_SQL_DATE" />
    Also, the cfsqltype of CF_SQL_DATE seems to truncate the time component off the date for you in CF9 & CF10, but I don't like dependencies like that as I've been burned in the past. If you don't mind the risk, you can simplify the logic by removing the int() function from the above.

  • Greater than equal symbol are coming across as question mark

    Hi:
    Greater than equal symbols and Less than equal symbols are coming across as question marks in Jasper Reports. Do you have any suggestions of how to solve this?

    This is the same problem as your other thread, keep it in one thread please:
    http://forum.java.sun.com/thread.jspa?threadID=5194766

Maybe you are looking for