A Database who is not Citadel
Hi,
I am using LabVIEW 8.2.1 RT DSC.
I would like to store some measurements results (analog continuous measurements),
in a "regular" database (not Citadel).
Since I am a bit familiar with SQL, I have Purchased SQL connectivity toolkit.
and I have seen some of the examples and managed to create a .udl file, to create a table and to log some Shared Variable Timestamp and Process Value (PV), (only when the PV changed).
and I have managed to create a VI that reads the data from the Database and plot it to a online graph.
I have noticed that my database is Microsoft access via Microsoft SQL server 2005 (that came with the DSC).
I want a bigger database than 4 GB.
what do you recommend ?
Can I use Mysql or Oracle with the SQL connectivity toolkit ?
Can I import data from Citadel into a Table in a "regular" database ?
(I have read 'Accessing Citadel 5 from other software' but I did not understand how it is been done)
Sincerely Yours,
Amitai Abramson.
Hi,
Thank You for your reply.
1. I am asking if it will crash. some type of MS SQL Server 2005 is installed (at the Server Computer), this installation was performed automatically when I have installed DSC Module. It is just sometimes MS products "don't like" other products, so I am asking if it will crash with MySQL.
2. I have created (as a test for SQL Connectivity Toolkit) a .udl file and I have noticed that tables I create and data I insert into those tables goes to some MS Access file .mdb (location - C:\Program Files\National Instruments\LabVIEW 8.2\examples\database).
Will it be that simple with MySQL too?
Will the linkage will be also through a .udl file?
Sincerely Yours,
Amitai Abramson.
Similar Messages
-
Database Level Security not working ???
The 10 g (10.1.2.1) documentation states the following:
Chapter 7 Controlling access to information:
"Regardless of the access permissions and task privileges that you set in Discoverer Administrator, a Discoverer end user only sees folders if that user has been granted the following database privileges (either directly or through a database role):
ex: SELECT privilege on all the underlying tables used in the folder "
So how come a folder (view in my case - not table) cannot be queried directly by a user, but the folder still shows up a choice when building a report using PLUS ? I am misreading the above ? For is sounds lilke to me if the user account does not have SELECT privilege then they will not see the folder in Discoverer ?
Anyone run into the same issue or have an explanantion ?
thanks
OBXI think the user has access to see all the folders in the business area in Discoverer if he has permission to do so. This is a Discoverer level security to filter people who should not have access to the business area at all. You'll find that although they can see these Discoverer folders because the permission is set in Discoverer Administrator, that the database tables they are based on will not allow the users to see any of the data if they don't have those rights at the database level.
-
Need a way to find out users who have not all logged in into the portal
Hi all,
Please can some body tell me the way to find out all the users who have not at all logged in into the SAP enterprise portal after their user ID's are created.
Are there any methods(UME APIs) or attributes that set the status of user whether he/she has logged in into the portal first time.
Thanks & Regards,
Hajira RehmanThere used to be a way, but here's what Detlev posted earlier this year:
<b>Hi everyone,
UPDATE on this: From SP16 on, the last successful login date does not get logged into the database anymore, see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/bc6b9202454dece10000000a422035/frameset.htm">here</a> - for performance reasons, as it is stated...
Hope it helps not to fall into this new trap
Detlev</b>
So, there are no simple APIs - you'll need to build your own mechanism. -
Database View do not refresh in ADF application
Greetings,
im facing a weird problem in my application (JDeveloper 11.1.2.4.0 - ADF). All this time i was working directly with tables (VO), but now i also started using database views.
Everything works fine, when i add a new row in a table that my Database Views is associated with, it refresh properly.
BUT if i delete rows manually from my database, the View do not refresh in my application, not by refreshing the page,
redeploying application, even executing the view object query inside the view object. The only way for the DB View to be
refresh inside the JDeveloper and on deployment time is by restart JDeveloper. I try adding an action on my OV to re-execute them when
i do something specifically, hopefully the will reset the cache and retrieve the DB view again, but with no luck..
Correction: now it doesnt even refresh on restart jdeveloper.
Just for the clarification, im talking about Database Views, and not just Object Views. I create a Object View inside the application to retrieve the data
from the Database View results.
Can you help me on this please?Yes the queries in SQLDeveloper was showing me correct results.
But i feel disappointed.. When i went to close SQLDeveloper to try something, it pop me a message to commit/rollback changes.
After i commit them, my app show correct results too. -
How to find a customer who does not have any activity in the last 5 years
HI all,
How to find a customer who does not have any activity in the last 5 years.
Thanks & Regards,
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 3, 2011 2:20 PMPost Author: tzinser
CA Forum: Formula
Okay, I left off a lot of important information...
I'm using two tables
TWDATA
EVENT
From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
The two tables are linked by OrderNumber. -
Livecache database instance is not able to connect from DBMGUI
Hello,
We are facing very critical problem. Livecache database instance is not able to connect from DBMGUI .
DB instace is down currently, i checked X_server is running. when i am trying to conect using DBMGUi its going on hang status, same way if i am trying to start using LC10, its going on hang..
Could anybody please help me out if faced this problem.
Earlier it was working fine. But now It 's not able to connect through DBM tool.
Any help would of great help..
Thanks.
Dinesh
please find xserver*.prt files as attached
Date Time PID Typ MsgID Label Message-Text
2009-06-12 03:10:43 2732 12902 XSERVER started, 'X64/SUN 7.6.04 Build 015-123-189-221'
2009-06-12 03:10:43 2732 12904 XSERVER Service port is 7210
2009-06-12 03:10:43 2732 12922 ENVIRON Command line arguments
2009-06-12 03:10:43 2732 12924 ENVIRON [1] start
2009-06-12 03:10:43 2732 12923 ENVIRON Command line argument dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump start
2009-06-12 03:10:43 2732 12898 ENVIRON Started by user id 58007 group id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON Current user id 58007 effective id 58007
2009-06-12 03:10:43 2732 12898 ENVIRON Current group id 1670 effective id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON cpu time unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON number of processes 29995
2009-06-12 03:10:43 2732 12898 ENVIRON number of open files 2048
2009-06-12 03:10:43 2732 12898 ENVIRON core size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON file size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON heap memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON stack memory size 8192 KBytes
2009-06-12 03:10:43 2732 12898 ENVIRON virtual memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump start
2009-06-12 03:10:43 2732 12898 ENVIRON PATH=/usr/xpg4/bin:/usr/ccs/bin:/usr/bin
2009-06-12 03:10:43 2732 12898 ENVIRON :/opt/SUNWspro/bin
2009-06-12 03:10:43 2732 12898 ENVIRON IFS=
2009-06-12 03:10:43 0 0
2009-06-12 03:10:43 2732 12898 ENVIRON TZ=NZ
2009-06-12 03:10:43 2732 12898 ENVIRON TMP=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON TMPDIR=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON USER=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON LOGNAME=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON DBROOT=/sapdb/programs
2009-06-12 03:10:43 2732 12898 ENVIRON LD_LIBRARY_PATH=/sapdb/programs/lib
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump completed
end of startup -
2009-06-12 03:10:44 2732 WNG 12458 XSERVER NISSL Utility init: CDKLoadSAPCryptModule: 51
2009-06-12 07:54:23 2732 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.115.104.42.'
2009-06-12 08:47:00 17388 ERR 11925 XSERVER Send packet, Ref:9 - connection closed (send:EPIPE)
current write position -Hi Ivan,
thanks for the reply, i used the commands suggested by you.
nzlsfn40:ltradm 43% pwd
/sapdb/data/wrk
nzlsfn40:ltradm 44% dbmcli -d LTR -u control,control db_state
OK
State
OFFLINE
nzlsfn40:ltradm 45% dbmcli -d LTR -u control,control db_admin
OK
nzlsfn40:ltradm 46% nzlsfn40:ltradm 46%
nzlsfn40:ltradm 46% dbmcli -d LTR -u control,control db_online
db_online commands is running since long and in knldiag. i am continuously watching logs as below, can you have any idea
Dinesh
logs :-
2009-06-12 10:58:34 137 12929 TASKING Task T114 started
2009-06-12 10:58:34 137 11007 COMMUNIC wait for connection T114
2009-06-12 10:58:34 137 11561 COMMUNIC Connected T114 local 3966
2009-06-12 10:58:34 137 11509 COMMUNIC Connection broken by appl state 10 T114
2009-06-12 10:58:34 137 WNG 11824 COMMUNIC Releasing T114 connection aborted
2009-06-12 10:58:34 137 12827 COMMUNIC wait for connection T114
2009-06-12 10:58:35 11 11561 COMMUNIC Connecting T115 local 3966
2009-06-12 10:58:35 138 12929 TASKING Task T115 started
2009-06-12 10:58:35 138 11007 COMMUNIC wait for connection T115
2009-06-12 10:58:35 138 11561 COMMUNIC Connected T115 local 3966
2009-06-12 10:58:35 138 11509 COMMUNIC Connection broken by appl state 10 T115
2009-06-12 10:58:35 138 WNG 11824 COMMUNIC Releasing T115 connection aborted
2009-06-12 10:58:35 138 12827 COMMUNIC wait for connection T115
2009-06-12 10:58:36 11 11561 COMMUNIC Connecting T116 local 3966
2009-06-12 10:58:36 139 12929 TASKING Task T116 started
2009-06-12 10:58:36 139 11007 COMMUNIC wait for connection T116
2009-06-12 10:58:36 139 11561 COMMUNIC Connected T116 local 3966
2009-06-12 10:58:36 139 11509 COMMUNIC Connection broken by appl state 10 T116
2009-06-12 10:58:36 139 WNG 11824 COMMUNIC Releasing T116 connection aborted
2009-06-12 10:58:36 139 12827 COMMUNIC wait for connection T116 -
How to Block user from Sending IM or Hide Presence of there user who is not in his department
Hi All,
How to Block user from Sending IM or Hide Presence of there user who is not in his department.
Thank youHi Jp,
Method 1:
You can use the Enhanced Privacy Mode in Lync 2013
<section class="ocpSection">
Enable Privacy Mode
By default, everyone except Blocked Contacts can see your presence status. To modify the privacy settings, you can do the following:
In the Lync main window, click the Options button.
In the Lync - Options dialog box, click Status, and then do one of the following:
Click I want everyone to be able to see my presence regardless of system settings (override default settings).
Click I want the system administrator to decide - currently everyone can see my presence but this could change in the future.
</section>
About Enhanced Privacy Mode
If your organization has enabled Enhanced Privacy Mode in Lync, you can choose whether to limit visibility of your presence information to only those people you’ve added to your Contacts list. You do that by selecting one of the following on the
Options->Status window:
I want everyone to be able to see my presence
I only want people in my Contacts list to see my presence
Method 2:
Using Privacy Relationship, you can block a particular user by adding him to blocked contacts
Anil Kumar (MCITP)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
[Symptom]
======================
In Exchange 2007, when you want to export mailbox to a .pst file, you should run the
Export-Mailbox cmdlet from a 32-bit computer that has the following installed:
The 32-bit version of the Exchange management tools
Microsoft Office Outlook 2003 SP2 or later versions
If not, you may encounter the following error message:
You check that you have these required installed, but you get the error below when you run Export-Mailbox in EMS.
“The specified mailbox database [Mailbox Database Name] does not exist.”
[Cause Analysis]
=======================================
This is because that the account you use to run Export-Mailbox cmdlet don’t have the Exchange Server Administrator role assigned.
You can check if this account has been delegated the Exchange Server Administrator role through the following path.
EMC -> Organization Configuration-> Check permissions in the result pane.
To delegate this Exchange Server Administrator role, right click on the
Organization Configuration node and choose Add Exchange Administrator,
you will see the Add Exchange Administrator window.
[More Information]
==============================
Export-Mailbox
http://technet.microsoft.com/en-gb/library/aa998579(v=exchg.80).aspx
How to Export and Import mailboxes to PST files in Exchange 2007 SP1
http://blogs.technet.com/b/exchange/archive/2007/04/13/3401913.aspx
Exchange 2007 cannot export pst files via its powershell
http://social.technet.microsoft.com/Forums/forefront/en-US/b3bc0dce-35f3-4a69-9a33-4f2a855b9f94/exchange-2007-cannot-export-pst-files-via-its-powershell?forum=exchangesvrgenerallegacy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hi,
Based on my test, if you make the user the owner of the database (rather than a user with the db_owner role), when you create a query, it creates it under the dbo schema rather than DOMAIN\username.
Steps to do so (in Management Studio):
Right click database, select Properties
Click File
Change Owner in the textbox
OK to confirm
Downside - other users under db_owner role will still have their username appended. So schemas have to be created for these users.
Jaynet Zhang
TechNet Community Support -
Tables are deleted but database size does not change in sql server 2008r2
Hi All,
20GB Tables are deleted in my database but database size does not change and disk size showing same size.Hi ,
I have ran the Disk usage by Top Tables report and Identified couple of tables with unwanted data for last 5 years. I have deleted the data for the first 3 years and then ran the Disk usage by Top Tables report again. When I compared the report before
and after the data deletion, I have noticed certain facts which is not matching with what I know or learned from experts like you. The following are the points where I am looking for clarification:
1.Reserved (KB) has been reduced. I was expecting the data Reserved (KB) will remain the same after the data deletion.
2. The Data(KB) and Indexes(KB) fields have been reduced as expected. The Unused(KB) field have been increased as expected.
I was expecting the total of Data(KB) and Indexes(KB) field space gained will be equal to the Unused(KB) field gained after deleting the data. But that is not the case. When I deducted(subtracted) the difference in the Reserved(KB)(Difference before
and after data deletion) field from the Total of space gained from the data deletion is equal to the Unused(KB) gained field value.
I am not a SQL expert and not questioning but trying to understand whether we really gain space by deleting data from the tables. Also keen to get the concepts right, but my testing by deleting some records confused me.
Looking ahead to all your expert advice.
Thanks,
Vennayat -
11gR2 Install Error, Listener is not up or database service is not registered with it
Hi all,
I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
Here's teh contents of my listener.ora file:
# listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = C:\app\Damien
Here's the contents of my tsnames.ora:
# tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Here is the last fe lines of my emConfig.log:
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
My Listner status output is here:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date 18-JAN-2014 09:27:34
Uptime 0 days 0 hr. 47 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
Many thanks for any assistance that you give. I'm learning so be gentle...
DamienSOLVED!
OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
What I did to solve the name resolution problem
1. Opened the
Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
the 'unknown' means that the DB didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
Thanks for all your help Baris, and Ed Steven website.
I know more now than when I started so I'm happy.
Thanks. -
If a group message doesn't completely go through, how can I see who did not recieve it?
I tried to send a mass text message (note: I have group messaging turned OFF, but I just used the field where you can send the same message to multiple recipients), however, it came back saying that "Your message was not sent. Tap "Try Again" to send this message." I know that some people recieved the text, as they replied to it, however I'm fairly certain that one or two people did not recieve it. Is there any way to figure out who did not correctly get the message from within the app? Thanks.
Change your password, alert your credit card company and itunes support.
-
I recently bought an iphone 4s from people who are not in the know
and restore my iphone .. Now do not be in use for not having ID and password ... Owner apple owner just gave me a serial number how do I want to continue to use this ... Their telephone help me: (I am having same problem . i can not use the phone. my Carrier ROGERS checked the phone its not stolen or lost phone but after restoring always ask for apple ID of previous owner and seller is not responding to any mails or phone if some one can help me out than it will be great.
thank you -
If I want to add a family member who is not in my household and has their own itunes account and credit info...will all their purchases be charged to my credit card as the Organizer?
Hi mbostick,
Welcome to the Apple Support Communities!
The only way a family member can use their own funds and not the Organizer’s account for purchases would be with store credit, such as an iTunes gift card.
Family purchases and payments
Making purchases
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
Have a great day,
Joe -
How to get a list of Local Users who has not logged in for 3 months or around 90 days
hi
i found this thread to pull out a list of local users
Retrieve all local user accounts information on remote computers (PowerShell)
however, i need to filter out users who has not logged in for 3 months or around 90 days, how can i do further filtering?
i understand dsquery has an -inactive <xweeks> , however i am doing it for local accounts$ErrorActionPreference = "silentlycontinue"
$([ADSI]"WinNT://$env:COMPUTERNAME").Children | where {$_.SchemaClassName -eq 'user' -and $_.lastLogin -gt (Get-Date).AddDays(-90)} | ft name,lastlogin
using the sample from the link extendend with the 90 days criteria, the erroraction preference surpresses the errors you get for accounts with no lastlogon value (guest being a typical one) -
goodnight. as you know apple has evolved considerably until today but there are people who do not have ability to buy new products. in my case I would like to know why the apple do not let the iphone 3g update to iOS 4.3 as are several applications that can not put on my iphone 3g due to this reason. Why does not Apple make a repository with applications for ios 4.2.1? or else do not work in an update to ios 4.3 on iphone 3g?
This has nothing to do with Apple, as Apple does not make the apps.
This is the decision of the app maker.
Contact those app makers and ask them why they do this.
Maybe you are looking for
-
Dump while Executing the Report HINUINFU
Dear All I am getting Dump while executing the T.Code - HRPBSIN_IN_INFU (HINUINFU). As per my Configuration it should update the IT0267 and the IT0582. While debugging the We found out that its updating the IT0267 internally. But while reachi
-
Error Parameter WI_ID contains an invalid value in webdynpro abap
Hi Experts, i am working with webdynpro abap and using work flow in my component , here i am getting error and the error is Parameter WI_ID contains an invalid value . its showing the error in windows parameter : wi_id and the wi_id is type sww_wiid
-
Weblogic 12c not picking up persistence unit in WAR
I'm trying to get an example CRUD application to run on WebLogic 12c (for the app see: http://henk53.wordpress.com/2012/04/15/jsf2-primefaces3-ejb3-jpa2-integration-project/) So far the applications runs on JBoss AS 7.1, GlassFish 3.1.2 and TomEE bet
-
IMac as a wireless access point to internet
Hi anyone knows iMac as a access point to internet to use other gadgets
-
Moving clips one frame at a time
I'm trying to line up some clips to all be the same length and start and end at the same exact time. But final cut pro x is making it very difficult for me! Is there an easy short-cut to move a clip one frame at a time? I want these clips to line up