A Moodle application requires UTF-8 and my DB has ISO8859 charset

Hi everybody.
A Moodle application needs UTF-8 charset but the DB charset is ISO8859. Is possible to make that one schema uses UTF-8?
Change the charset is not an option.
If it's not possible I'll have to create another instance with UTF-8 charset.
Thanks in advance.

Wrong forum, but...
In your shoes, I would almost certainly create another instance. However, if there was some reason that made that unacceptable, you could use the NCHAR, NVARCHAR2, and NCLOB datatypes to support Unicode charactersets in your non-unicode database.
See [http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/datatype.htm#i14967] for details.

Similar Messages

Why do I get a popup message in multiple languages requiring a shutdown and restart

Why do I keep getting a popup message in multiple languages requiring a shutdown and restart? Has been going on for a few months. Because of the shutdown reports have been sent to Apple upon restart.

After it restarted, did you see a dialog box resembling this one:
If so, next time it occurs click Report...
Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.
If problems continues to occur please determine if they also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

Installing Applications not requiring user name and password?

Hi, I'm experiencing the bug that everyone is experiencing where my suer doesn't have administrative rights to my computer. But I seem to be operating fine.
The question I have is, should I be able to install applications without a username or password? When I just installed Adobe Flash Player 9 on my computer (downloaded from Adobe) it didn't require a username or password. Has anyone else experienced this? I have always been asked for it in the past. What is up with that?

This was an fresh install of Leopard without any historical data. I did restore my backed up my documents folder once leopard was installed but that was it. It seemed this all started when I tried to install some software and discovered that I no longer had an administrative user for my computer. Regardless it does concern me that there is a way for software to be installed into Leopard under the right circumstances. I finally was able to get my user back to admin rights via a workaround where I enable the "root" user. Anyway I finally gave up and went back to Tiger (luckily have been doing regular back-ups of my data). I am going to report these bugs to Apple or try to anyway. I'm just frustrated that things went so bad so quickly and I don't feel like I was doing anything out of the ordinary with my computer. I have done first installs of mac OS's the week they came out in the past and have never seen anything like this.

Why is there no control to turn off location services? I updated my iPhone 4 to iOS6.0.1. I now have no control over location services. Will it always be on and only activate if an application requires it?

I updated my iPhone 4 to iOS6.0.1. I now have no control over location services. Will it always be on and only activate if an application requires it? I want to be sure it will not drain the battery unnecessarily.

I found this answer in ios 4, but it worked on the ios 6 on my iphone 4:
moodogg
Currently Being Moderated Re: iPhone 4 / iOS 4 - Location Services Always On
Nov 20, 2010 10:25 PM (in response to modular747)
so i actually ended up walking into genius bar today. they couldn't figure out which program was causing the glitch either, but the way they solved it was by resetting all the location service permissions altogether. for those of you who want to know how to do this, navigate to "settings > general > reset > reset location warnings". also fyi, the apple service rep told me the purple location service icon next to each app simply signifies that particular app has requested your location within the past 24 hours, not necessarily that the app is active. hope this helps those with the same problem as i had. iPhone 4, iOS 4
I will mention that I did not have the problem until I downloaded the new googlemaps, which I have deleted off my iphone.

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

Error: This application required an Xtra (ActiveX...) that either does not exist or failed

Hi All,
im having trouble few days now , i hope someone can give me a lead here.
i have a director mx file written in arabic, i open it in Director 11.5, the file behave strangely, very slow publishing process, very slow access to the xtra list.
after publishing (shockwave and html), i open the html, the preloaded start to run but i can see its not reaching 100%, after a while i get the error massage:
"This application required an Xtra (ActiveX...) that either does not exist or failed..." and firebox or IE crashes.
In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
things i try with no success:
uninstall and reinstall shockwave player
check the same file in another machine
exclude and include xtras in Publish Settings > Files
add activex.x32 from other places
Hope for good news
Win Xp sp3
Thanks
Shay

In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
Because AX controls aren't SW-safe. You will have to redesign your file to remove the ActiveX control if you want it to run in a browser.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

Cant install or uninstall Adobe Air. Keep getting error message "This application requires a version of Adobe AIR which cannot be found"

I am running Windows 7 and use Adobe AIR for Flixster. When I tried to open Flixster I recieved an error message saying i needed to install Adobe AIR. I looked and saw that according to control panel, Adobe AIR is installed. I attempted to uninstall but get this EXACT message:
"This application requires a version of Adobe AIR which cannot be found. Please download the latest version of the runtime from http://www.adobe.com/go/getair, or contact the application author for an updated version."
I have tried going to the mentioned website but i get an error message saying installation failed and may need administrative privilages but I AM the administrator!
I then tried multiple solutions on the forums including the command prompt uninstall and still no luck. contacted customer support who told me i can only receive assistance through these forums.
Very frustrating. Please Help.

I have the same issue with a customer of ours:
Try to uninstall AIR – same message. (When I reinstall, the install says it’s successful.) I try to run our app, same message. I downloaded another AIR app, same message – so it’s not our app it’s AIR. We logged in as Administrator, same message. It’s a Windows7 machine. I did a system restore to 2 days ago and started over and still the same issues. I tried running the Windows Fixit to uninstall https://support.microsoft.com/en-us/mats/program_install_and_uninstall – didn’t work.

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

How to avoid "The application requires an earlier version of Java. "?

Hello, I deployed a Java applet built like this
javac -source 1.4 -target 1.4 foobar.javaThe reason why I do it this way, is that many public libraries, have computers that only have Java 1.4 installed (and I found one case with 1.3 but decided not to go that far), and the users have no way to upgrade them. Hence if I want to deploy an app that can be used by most everybody, which is the whole idea of Java, then I have to use 1.4, no choice.
OK, now I also have users who have the latest Vista and Firefox. On those computers, they see the following warning when my applet tries to run:
"The application requires an earlier version of Java. Do you want to continue? Run or Cancel The required version of Java, 1.6.0-oem, is not the latest and may not contain the latest security ..."
Of course, after seeing this kind of warning, I am losing a lot of those users immediately. (and by the way, I am built with 1.4, not 1.6-whatever)
This message is widely reported on the Internet and the solution is always similar - some variation of "uninstall and reinstall the latest Java".
This of course is a NON_STARTER. I cannot request my users, to reinstall Java. they won't bother. The whole idea of Java applets, again, is that I write an applet and the user sees it without having to tweak around with their computer.
So I guess my question is: what can I do in my applet, to prevent these messages from happening on Vista, and at the same time be accessible to public lib computers with Java 1.4?
And second rhetorical question: why can't Sun get their act together and deploy a platform where I can just write my code according to their specs and it will run according to their specs, without any warnings to scare away half of my users??? Please Sun tell me.
Mark
Edited by: Mark_Galeck on Apr 18, 2009 10:33 PM

Mark.
[1.4 is EOL|http://java.sun.com/j2se/1.4.2/] so I suggest you target 1.5.
Youe contention that world should not change because a small proption of near-sighted troglodites insist on wearing frilly collars is complete bunkum. Get over it. Fast.
If ever I get the chance, I shall tell Sun to continue doing exactly what they are doing with regards to developing the core Java language. Hire the best engineers; go forth and prosper; insist on backwards compatability; and never mind the bollocks (here's the sex pistols).
... or maybe one would prefer the MS .NET platform, where no version is at all backwards compatible with any previous one; is supported for just three years; with each CLR occupying a full third of ones modest laptop hard disk?
Be careful what you wish for. You just might get it.
~~ anonCheers. Keith.
Edited by: corlettk on 19/04/2009 16:27 ~~ Typoes!

HT1420 When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal.

Identify UTF-8 and UTF-16 formats

hi,
Clients submit there unicode messages (arabic,telugu etc langs) in hex format then our application accepts that message and process it.
But there are many tools in the market which will convert the unicode to UTF-8 and UTF-16 formats.
so i need to idetify whether the message is in
UTF-8 or
UTF-16 or
hex(no problem)
something like
isUTF8(String message)
isUTF16(String message)
so that i can convert them back to hex and dump it into database.
regards
Heral raj

You can identify whether it is UTF16 or UTF8 by looking at it's BOM (byte order mark). These are first 2 bytes of the stream.
Check this link http://www.websina.com/bugzero/kb/unicode-bom.html
I do not think implementation should be a problem
Thanks
Gaurav

The application requires more database privileges than you have currently

Hi,
on 10g R2, no one can login to DB Control grid (not sys, not sysman nor system ). We get the following :
The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information.
We are sure of password.
I saw and applied the metalink notes 330682.1 and 363065.1 that says :
grant SELECT_CATALOG_ROLE to user;
grant select any dictionary to <user>;
but no result.
Any help ?
Thank you.

1. What operating system.
2. What version of Oracle (10gR2 is a marketing label not a version number ... provide all decimal places)
3. What are the values of the environment variables ORACLE_HOME and ORACLE_SID?

Unicode, UTF-8 and java servlet woes

Hi,
I'm writing a content management system for a website about russian music.
One problem I'm having is trying to get a java servlet to talk Unicode to the Content mangament client.
The client makes a request for a band, the server then sends the XML to the client.
The XML reading works fine and the client displays the unicode fine from an XML file read locally (so the XMLReader class works fine).
The servlet unmarshals the request perfectly (its just a filename).
I then find the correct class, and pass it through the XML writer. that returns the XML as string, that I simply put into the output stream.
out.write(XMLWrite(selectedBand));I have set correct header property
response.setContentType("text/xml; charset=UTF-8");And to read it I
         //Make our URL
         URL url = new URL(pageURL);
         HttpURLConnection conn = (HttpURLConnection)url.openConnection();
         conn.setRequestMethod("POST");
         conn.setDoOutput(true); // want to send
         conn.setRequestProperty( "Content-type", "application/x-www-form-urlencoded" );
         conn.setRequestProperty( "Content-length", Integer.toString(request.length()));
         conn.setRequestProperty("Content-Language", "en-US");
         //Add our paramaters
         OutputStream ost = conn.getOutputStream();
         PrintWriter pw = new PrintWriter(ost);
         pw.print("myRequest=" + URLEncoder.encode(request, "UTF-8")); // here we "send" our body!
         pw.flush();
         pw.close();
         //Get the input stream
         InputStream ois = conn.getInputStream();
            InputStreamReader read = new InputStreamReader(ois);
         //Read
         int i;
         String s="";
         Log.Debug("XMLServerConnection", "Responce follows:");
         while((i = read.read()) != -1 ){
          System.out.print((char)i);
          s += (char)i;
         return s;now when I print
read.getEncoding()It claims:
ISO8859_1Somethings wrong there, so if I force it to accept UTF-8:
InputStreamReader read = new InputStreamReader(ois,"UTF-8");It now claims its
UTF8However all of the data has lost its unicode, any unicode character is replaced with a question mark character! This happens even when I don't force the input stream to be UTF-8
More so if I view the page in my browser, it does the same thing.
I've had a look around and I can't see a solution to this. Have I set something up wrong?
I've set, "-encoding utf8" as a compiler flag, but I don't think this would affect it.

I don't know what your problem is but I do have a couple of comments -
1) In conn.setRequestProperty( "Content-length", Integer.toString(request.length())); the length of your content is not request.length(). It is the length of th URL encoded data.
2) Why do you need to send URL encoded data? Why not just send the bytes.
3) If you send bytes then you can write straight to the OutputStream and you won't need to convert to characters to write to PrintWriter.
4) Since you are reading from the connection you need to setDoInput() to true.
5) You need to get the character encoding from the response so that you can specify the encoding in           InputStreamReader read = new InputStreamReader(ois, characterEncoding);
6) Reading a single char at a time from an InputStream is very inefficient.

JDeveloper Error: White spaces are required between publicId and systemId.

I'm using JDeveloper 10.1.3.1.0.
This error is occurring in a BPEL process project.
With one particular web service I have, adding a Partner Link to the BPEL generates the following compile error:
Error: White spaces are required between publicId and systemId.
I can add Partner links from other web services and the BPEL will compile fine. The main difference I can see is that this web service supports WS-Addressing.
I have found one other reference to a similar (but not exactly the same) problem elsewhere in these forums but the fix is not really applicable. All of the wsdl files pass the "Validate WSDL" operation, and I don't see anything wrong with them.
When the error occurs and I select "Go To Source" it points back to the first line of the bpel file.
Can anyone help me out on this?
This is the wsdl for the web service, wsademo.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:MIME="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:DIME="http://schemas.xmlsoap.org/ws/2002/04/dime/wsdl/"
xmlns:WSDL="http://schemas.xmlsoap.org/wsdl/"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<schema targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified"
attributeFormDefault="unqualified">
<import namespace="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<import namespace="http://www.w3.org/2003/05/soap-encoding"/>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademo">
<complexType>
<sequence>
<element name="in" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademo">
<part name="parameters" element="ns:wsademo"/>
</message>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademoHeader">
<part name="MessageID" element="wsa:MessageID"/>
<part name="RelatesTo" element="wsa:RelatesTo"/>
<part name="From" element="wsa:From"/>
<part name="ReplyTo" element="wsa:ReplyTo"/>
<part name="FaultTo" element="wsa:FaultTo"/>
<part name="To" element="wsa:To"/>
<part name="Action" element="wsa:Action"/>
</message>
<portType name="wsademoPort">
<operation name="wsademoResult">
<documentation>accepts a string value from a relayed response</documentation>
<input message="tns:wsademoResult"/>
</operation>
<operation name="wsademo">
<documentation>echos a string value and relays the response to the wsa replyTo address (if present)</documentation>
<input message="tns:wsademo"/>
<output message="tns:wsademoResult"/>
</operation>
</portType>
<binding name="wsademo" type="tns:wsademoPort">
<SOAP:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="wsademoResult">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademoResult"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
</operation>
<operation name="wsademo">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademo"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
<output>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</output>
</operation>
</binding>
<service name="wsademo">
<documentation>demonstrates WS-Addressing capabilities</documentation>
<port name="wsademo" binding="tns:wsademo">
<SOAP:address location="http://localhost:11001"/>
</port>
</service>
</definitions>
This is the wsdl that is generated by JDeveloper that contains the PartnerLinks and refernce back to the original wsdl file, wsademoRef.wsdl:
<definitions
name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>
<import namespace="http://localhost:11001/wsademo.wsdl" location="wsademo.wsdl"/>
<plnk:partnerLinkType name="wsademoPort_PL">
<plnk:role name="wsademoPort_Role">
<plnk:portType name="tns:wsademoPort"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
And finally the is the BPEL, WSAtest3.bpel:
<?xml version="1.0" encoding="UTF-8"?>

<process name="WsaTest3" targetNamespace="http://xmlns.oracle.com/WsaTest3"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://localhost:11001/wsademo.wsdl"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns2="http://localhost:80/Service.wsdl"
xmlns:client="http://xmlns.oracle.com/WsaTest3"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:WsaTest3"
myRole="WsaTest3Provider"/>
<partnerLink name="wsademo" partnerLinkType="ns1:wsademoPort_PL"
myRole="wsademoPort_Role" partnerRole="wsademoPort_Role"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:WsaTest3RequestMessage"/>

<variable name="outputVariable"
messageType="client:WsaTest3ResponseMessage"/>
<variable name="Invoke_1_wsademo_InputVariable" messageType="ns1:wsademo"/>
<variable name="Invoke_1_wsademo_OutputVariable"
messageType="ns1:wsademoResult"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="inputVariable" createInstance="yes"/>

<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:WsaTest3ProcessRequest/client:input"/>
<to variable="Invoke_1_wsademo_InputVariable" part="parameters"/>
</copy>
</assign>
<invoke name="Invoke_1" partnerLink="wsademo" portType="ns1:wsademoPort"
operation="wsademo" inputVariable="Invoke_1_wsademo_InputVariable"
outputVariable="Invoke_1_wsademo_OutputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_wsademo_OutputVariable" part="parameters"/>
<to variable="outputVariable" part="payload"
query="/client:WsaTest3ProcessResponse/client:result"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="outputVariable"/>
</sequence>
</process>
-Wayne Stielau
Open Text Corporation
Irvine, CA

I have discovered two issues.
1. JDeveloper does not seem to like the SOAP 1.2 envelope and encoding namespaces. Is this a known limitation? Changed them to 1.1.
2. JDeveloper does not like the double definition of wsaDemoResult.
When these two items are changed, the bpel compiles clean. Now I've got to get the message header to populate correctly. There are no values assigned, only namespace definitions. This is the SOAP packet that is received at the web service.
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Header>
<MessageID xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<From xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<RelatesTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<Action xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<ReplyTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<To xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<FaultTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
</env:Header>
<env:Body>
<wsademo xmlns="http://localhost:11001/wsademo.wsdl">
<in xmlns="">hello</in>
</wsademo>
</env:Body>
</env:Envelope>

A Moodle application requires UTF-8 and my DB has ISO8859 charset

Similar Messages

Maybe you are looking for