A new button required on shoppingcart screen

Hi all,
I need a new button on the shopping cart screen, so that an interactive form can be submitted to the user. I have gone through the BAdI ( BBP_SC_MODIFY_UI ). It does not look to me that it can be used for additional buttons. Please advice.
Thanks.

Hello Mohammad,
I'm not sure what kind of interactive form you need to call. If the interactive form is like HTML form, catalog interface has option called "E-Form" which give you option to pass values to Shopping Cart by BBP_CAT_CALL_ENRICH BADI.
There is Business Card sample "BBP_BUSINESSCARDS".
Regards,
Masa

Similar Messages

Add a new button to BID Invitation screen

Hi,
How to Add a new button to Bid Invitation Screen in SRM?
Thanks,
Raveendra

Hi
Which SAP Version you are currently on ? What is the exact requirement ?
If i understand you right, Incase you want to add a button to the existing screen template then it will require standard code change and also you need to plan out how will you will code the logic to activate the button.
There is no BADI which can do this as this is not a SAP funtionality. You need to do a little bit of research on this to get the job done.
Regards
- Atul

New buttons on SRM contract screen? (+)

Hello,
I'm asked to add specific button into the SRM contract screen (BBP_CTR_MAIN transaction). I've been trying to use BBP_CUF_BADI, but achieved none - my customer screen is not displayed at all. However it is called - I've checked it using the debugger. What am I doing wrong?
Thanks in advance.

Hi Cyrill,
Please go through the following lnks,
Add a new button to BID Invitaion
Add customer button to check status screen
Hope it helps.
Thanks,
Pradeep

Add customer button to check status screen

hi everyone
i'm quite new in developing srm and need your help.
my customer wants me to put a new customer button on the check status web screen at item level which is supposed to work like the print button.
so if i want to integrate this customer button do i have to modify the screen and html template? as far as i know there is no customer exit for this?!
thanks in advance!

Hi
Which SRM version are you using ?
The addition of a new button for a new process means modification to standard screens, HTML templates used in the relevant Internet (Web) Services and the releavnt source code.
Addition of button can only be done through ITS Template change.Please look in the Internet services say - BBP_BID_INV (for Bid Invitations) Or for service - BBPSC01 (shopping cart) for the exact template in whcih you want to add the button
You have to define a new button in the screen and in the template. Then assign to it an OK_CODE and manage it in the PBO of the screen.
There is no BADI which can do this as this is not a SAP funtionality. You need to do a little bit of research on this to get the job done.
As a start step, You can use the BADIs - BBP_CUF_BADI and BBP_CUF_BADI_2 to change the display from customer-defined fields to the SAP standard screen. This BAdI enables you to control whether the fields can be edited, and how they are displayed.
MODIFY_SCREEN method will Show/hide field display and restrict edit options.
For more information on BADI please go to SPRO -> BADI.
OR View the information on BADI's.
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Implement - BADI - BBP_CUF_BADI (in SRM 4.0) to display a customized screen.
Related link ->
a new button required on shoppingcart screen
Hope above proves helpful to you.
Regards
- Atul

New Button not appearing in Choose company screen

Hi All,
Today at one of our customer we found that when we goto choose company screen with user with super user authorisation, New button (used to create new company) doesn't appear.
Customer uses SAP B1 2007 B Patch Level 08
Does anybody has idea what could be the reason for this ?
BR
Samir Gandhi

Hai!
Is this issue in Client Machine or in server?
This is because of corruption of client installation in SERVER OR CLIENT Machine.
Uninstall the Client in SERVER or CLIENT Machine and Reinstall using Upgrade exe in SERVER or Client setup in B1SHR for CLIENT Machine.
While reinstalling, choose Different path and install.
Take Neccessary Backups..
Regards,
Thanga Raj.K

FI Report Painter (FGI1) - add new button in output screen

Hi all,
I have a report created by tcode FGI1 (Create Drill-down Report) which bases on form 0SAPBSPL-01 (Fin. Statement: Actual/Actual Comparison). I wanna know if there are any ways to add a new button in output screen after report execution (i.e to print the content into smartforms).
Thanks in advance.
Solaris.

Instead of creating after the output you can add the button to create the form on the main screen itself i.e. program SAPMKCEE screen1125. Either on the application tool bar or on the screen 1125.

New iPad (3 gen) Home button requires pressure

The Home button on my new Ipad (3 gen) requires more pressure to activate than my old iPad (1 gen). Is anyone else experiencing this with the new iPad?

I have not. My new IPad (3rd Gen) home button requires very little pressure. Sounds defective. If you are in the return window, return it. If not, sounds like you need to setup service as you are covered under warranty.

Ideas for Adding a Quick Print Button to VA01 Overview Screen

Problem Statement:
Our users would like a "quick print" button on the VA01/VA02 application toolbar that immediately spools the Order Confirmation output to the printer. Our users want to print the output on demand, i.e., they do not want the output to automatically be printed when the order is created because a printout is not always needed. We already have condition records created with Dispatch Time set to 3 - Send with application own transaction. However, it takes 7 or more clicks to print the output on demand by navigating the menu (Extras > Output > Edit...Further Data...etc.) and changing the Dispatch Time to 4 - Send immediately when saving. This is a big ergonomic issue and a time killer.
Although the number of clicks to print are less when printing the output from the VA02 initial screen (via menu Sales document > Issue Output To), this is not acceptable when creating new orders. Really need an on-demand, quick print button on the VA01 screen. As an aside, we have a totally custom transaction for preparing sales order data (shopping cart-like way of finding materials and entering required data) that then calls VA01 and fills in all of the information. When saving in VA01, the user is returned to our Z-transaction so asking the user to subsequently run VA02 to print is not practical.
Current Output Determination:
We have custom output type ZBS0 (copy of BS0). Condition records for print medium are set to Dispatch Time = 3.
Questions:
1. Searching these forums, it appears custom code (extension or user exit?) can be written to call RSNAST00, or something similar, to automatically send output having a Dispatch Time = 3. Where can I find more information on exactly how to do this?
2. Do transactions VA01 and VA02 (Overview screens) have extensions that allow a print button to be added to the application toolbar? We would want to call the custom printing code from the button to send the output.
Any feedback on how others have solved this problem would be greatly appreciated.
Warm Regards,
Rob
P.S. Using GuiXT is not an option for us.

HI
We had similar issues with printing packing list and picking list by the warehouse people.
We created a new ztransaction with input fields of delivery number, output type, number of copies and a check box for repeat output(in case if the output was already printed).
You can also create a new Z-transaction with input fields of Sales order number(mandatory field), output type (Default it with value of ZBS0), number of copies (default it with 1) and a check box. On executing the transaction You can provide a message if the output was already printed so that the user can select the check box to repeat the output and execute. You can also print multiple SO by giving a range value if required.
If you do not want the user to enter the new ztransaction every time, try providing a menu path to the new z-transaction from the existing z-transaction which you are using for order entry.
Hope this helps you.
Thanks,
Arun.S

Ideas for Adding a "One Click" Print Button to VA01 Overview Screen

I am not an ABAP developer and am doing some preliminary functional investigation to determine the best way to add a simple "one-click" button that allows a Sales Order Confirmation output to be sent to the printer.
Can someone that really knows, tell me whether or not a custom menu item can be added to VA01 and VA02?
I have seen lots of threads telling folks how to find user exits and menu exits for a program so I don't need that advice. Rather, looking for someone who has already investigated this for VA01 and VA02 and knows the answer.
Problem Statement:
Our users would like a "quick print" button on the VA01/VA02 application toolbar that immediately spools the Order Confirmation output to the printer. Our users want to print the output on demand, i.e., they do not want the output to automatically be printed when the order is created because a printout is not always needed. We already have condition records created with Dispatch Time set to 3 - Send with application own transaction. However, it takes 7 or more clicks to print the output on demand by navigating the menu (Extras > Output > Edit...Further Data...etc.) and changing the Dispatch Time to 4 - Send immediately when saving. This is a big ergonomic issue and a time killer.
Although the number of clicks to print are less when printing the output from the VA02 initial screen (via menu Sales document > Issue Output To), this is not acceptable when creating new orders. Really need an on-demand, "one click" quick print button on the VA01 screen. As an aside, we have a totally custom transaction for preparing sales order data (shopping cart-like way of finding materials and entering required data) that then calls VA01 and fills in all of the information. When saving in VA01, the user is returned to our Z-transaction so asking the user to subsequently run VA02 to print is not practical.
Current Output Determination:
We have custom output type ZBS0 (copy of BS0). Condition records for print medium are set to Dispatch Time = 3.
Ideal Solution:
Add a Print Icon to the application toolbar as described above. From the button, write custom code that calls RSNAST00 (or is there a better way?) to send the output to the printer.
Any feedback on how others have solved this problem would be greatly appreciated.
Rob

Still looking for input from anyone that has had experience trying to add a menu item or toolbar button to VA01. In our case, for sending output.
Madhu,
Please again read my Problem Statement in my original posting for the business requirement. We are using ECC 6.0. Yes, I know that transaction VA02 has Sales Document > "Issue Output To" that allows you to print. However, we want to be able to print from the VA01 Overview screen after all of the sales order information has been entered. We would like to be able to click a print button which would save the new sales order and immediately issue the output. Again, we do not want the output to automatically print for every new sales order - we want to be able to print only when needed. The conditions that a sales person would use to decide to print a copy are too numerous or varied so they cannot be automated in a condition record. Of course we do use condition records for creating the output but we do not send immediately on save.
When creating a sales order, the sales person does not want to do the extra clicks and key strokes to then navigate or open a new VA02 session to print from the VA02 initial screen. And as described in my original posting, it is a lot of clicks navigate the VA01 Extras > Output menu to change the output to print on save.
If you observe the "day in the life" of a sales person and see all of the key strokes and clicking required to create an ECC 6.0 sales order, you understand why the extra 7 to 11 clicks to just print an output is very annoying. We have created a totally custom Z-transaction that allows our sales folks to capture everything need for a new sales order all on one screen with no tab views. We then launch VA01 to fill in all of the data entered in our custom transaction. This all works very well and is a huge time saver for our sales staff. Now we are looking to save a few more clicks by simplifying the printing.

Adding a new button in the PO search summary in SRM 3

Hello gurus,
my requirement is to add a new button in the search summary for PO in SRM. Here's the task: every time a search is executed, the result is a list of purchase orders and every item has on the left two icons, "Show PO" and "Modify PO". There are merely a shortcut that brings the user to the PO screen in which the document is shown/can be modified.
These two buttons are standard... my task is to add a new button in the template, "Copy PO", which should be a shortcut to the omonimous button which is present in the PO view screen. So I think this new button should work as the two standard ones.
In order to do so, I looked into the proper template: SAPLBBP_PDH_SEARCH, screen 3003, which belongs to the package BBP_PRODOC_C (ITS service BBPSEARCH).
I tried to "duplicate" the part referring to a standard button (e.g. the "display icon" chunk), obtaining a new chunk which represents the new button in the template.
And... it works, in the sense that the button is visible and clickable. So far so good. Here's the questions since I'm not absolutely an expert on Jscript... My button, once clicked, triggers my FORM (PO_COPY) which should receive the header GUID of the Puchase Order.
In debug I've seen that the form fails since it does not receive any parameter, and that's probably related to this section:
(angle brackets omitted, it gave me an error posting tags in sdn)
"JavaScript:HyperSubmit('PO_COPY', '`MAINLIST-LINE_NUMBER[j].value`')"
The problem is I did not understand how to check for possible parameters of this HyperSubmit method. Also, I'd like to check what's the structure of MAINLIST (as far as I've seen, MAINLIST-LINE_NUMBER[j].value is a parameter passed to the form) but don't know how to see that. Can anyone please direct me through these passages? Thanks in advance.

Hi Matteo Montalto,
Please let me know how you added new button.
Regards,
neelima

Activating Order as Direct material button on Shopping cart screen

Hello SRM experts,
we are in SRM 5.0. we implemented BADI: BBP_DP_PROD_CHK_BADI to suppress Order as direct material button on Shopping cart screen.in this BADI under PRODUCT_CHECK method we have this code CLEAR ev_dp_possible.Now the requirement is to bring back that order as direct material on to shopping cart screen and we need to check there for direct material and non direct material.
i commented the code in METHOD PRODUCT_CHECK . but still i'm unable to see that button on SC screen.After bringing that button on to screen we need to check for Direct and non direct materials, if it is a non-direct material and trying to press button Order as Direct Material it should hav to give some error.
please help me.
thanks in Advance....

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Enhancement- adding new buttons in IH01

Hi Experts,
Basically IH01 is a report program, my requirement is to add 2 buttons on IH01 screen.
Can some one tell me what are the possible ways to add the new buttons?
Regards,
Abhishek.....

Hi,
We do not maintain any 'functional location' in our company so i can go into the transaction and check anything more for you.
By the way, what are you trying do with PF-STATUS.
Regards,
RS

How can a new button Event open sales order

CRM WEB UI issue.
On assignment Block there is a New button , on New button Event i have to open sales order .
Please help me.
Thanks in advance .
Kumar6

Hi Kumar,
Whenever you got any requirement then find out on Web UI how they have done it. As now you want to show sales order then first find out Component name for Sales order.
So Go to transaction u2018CRM_UIu2019. Chose u2018SalesProu2019 as a Role. In Navigation Bar click on u2018Sales Cycleu2019 and in Second level link there is u2018Sales Orderu2019. Click on it. Check it is a screen you want on your button click.
If yes then you need to find its Technical Data (details). So click inside Work Area and press u2018F2u2019 key.
Then you will get UI component name, View name , Context name, Role key, etc. So you have to pick that UI Component name and give it in Transaction Code u2018CMP_WD_BSPWBu2019.
Now Go To u2018Run Time Repositoryu2019 , In Component Interface They have created u2018Component Interfaceu2019 that you need to call in your Button click event. If you donu2019t know use of u2018Component Interfaceu2019 then first read it else its good for you.
Well next time when you will write any Question, In Subject write it in One line so that all can see in list and answer you quickly.
Thanks,
Durgesh Pagar.

UmLogonPage.jsp - Add new Button

Hi Portal experts,
I am customizing the Logon Page, umLogonPage.jsp . My requirement to add new button in umLogonPage.jsp and on action it should redirect BSP iview.
Can you help me to implement this. I have downloaded the Par file and imported in NWDS .
Please provide help if possible.

Hi Rashi
Go through Modifying The Logon Par(or customising the Logon Screen)
Just search for custom login page in portal and you will get various link on this.For adding new button add the button code in umLogonPage.jsp.You can copy the Submit button code already available and change the source link.
Regards
Shankar

Deactivating the Function codes of Buttons on standard RF screen

I have to deactivate the functionality of some of the function keys(Buttons) on Std. SAP RF Screen(Quant screen) of LM51 transaction (Pgm: SAPLLMOB & Screen# 0152). How can I achieve this. I appreciate if any one can guide me on this.
Thanks
Usha

Hi,
Try this out with Transaction Variant (T.code is SHDO)
Transaction SHD0 - Create a variant for the required transaction bychanging the layout through hiding fields and screens
The Below data i copied from the web, this may helpyou ...
Case one for creating Transaction Variants
Step 1:
Execute transaction SHD0 and create a Transaction Variant against the original transaction.
Step 2:
As soon as you press the create button, the original screen of the transaction will appear. After pressing any button/tab on the screen a menu variant screen will appear. Make sure to check any field or tab or any button you want to disappear from the menu functions. Press the exit and save button when you are sure that no further settings are required on sub-screens (if present). After pressing the exit and save button another menu variant screen will appear. Press the save button here and save as a local object or under any development class.
Step 3:
When you are back on the Transaction Variant (SHD0) screen, press shift+F6 or click the goto menu and press the create variant transaction button. Through this transaction SE93 will be executed. Enter the transaction name you want to create and any other required field and now press the save button.
Step 4:
Now execute the transaction you create through create Transaction Variant and enjoy the results.
Case two for creating Transaction Variants
Step 1:
Create a dialogue transaction through SE93 and enter the program name and screen number of the original transaction you want to make a variant on (e.g., PFCG). Press the save button and check whether the replica transaction (PFCG) has been created successfully by executing it on a new session.
Step 2:
Execute transaction SHD0 to create a Transaction Variant. Specify the transaction name (replica of PFCG) which you have just created and create a Transaction Variant against the replica transaction.
Step 3:
As soon as you press the create button, the original screen of the transaction will appear. After pressing any button/tab on the screen a menu variant screen will appear. Make sure to check any field or tab or any button you want to disappear from the menu functions. Press the exit and save button when you are sure that no further settings are required on sub-screens (if present). After pressing the exit and save button another menu variant screen will appear. Press the save button here and save as a local object or under any development class.
Step 4:
When you are back on the main screen of the SHDO (Transaction Variant) click the edit option on the menu tab and activate Standard Variant. Through this a Standard Variant will be assigned to the transaction specified (replica transaction).
Regards
Sudheer

A new button required on shoppingcart screen

Similar Messages

Maybe you are looking for