A new row being created while Editing the existing one.

Hi All,
I have a custom page, where i need to edit the existing Data. I have initialized my EOVO in PR. There is also a Lov which is used to search the existing data. Then i edit the field and Save it. Everything works fine and the existing row is being updated. But there creates a new row also with only one field is being populated which is the attribute which i have set on my LOV.
how can i stop this new row from being created.

Hi,
Close your previous thread's if answered. One of which is
Explicitly setting the value in my MessageChoice & MessageTextInput
Regards,
Anand

Similar Messages

HT1175 Time Machine wants to start with a new, full backup instead of using the existing one

Hi, my Time Machine wants to start a new, full backup, instead of continuing with the existing one on the time Capsule.
Looking a the Troubleshooting guide, I've found the following piece of info, which is, as 99% of the times with the troubleshooting guides, totally useless to resolve my problem...
Message: Time Machine starts a new, full backup instead of a smaller incremental backup
There are three reasons why this may occur:
You performed a full restore.
Your Computer Name (in Sharing preferences) was changed--when this happens, Time Machine will perform a full backup on its next scheduled backup time.
If you have had a hardware repair recently, contact the Apple Authorized Service Provider or Apple Retail Store that performed your repair. In the meantime, you can still browse and recover previous backups by right-clicking or Control-clicking the Time Machine Dock icon, and choosing "Browse Other Time Machine disks" from the contextual menu.
It should be noted (hence the uselessness of the guide) that:
-I haven't performed ANY full restore
- I havent changed my computer name
- My computer has not had ANY repair, much less a hardware repair. Neither recently, nor in the 9 months I've owned it.
Which puts me back to square one, with the marginal improvement that now I have a way of browsing my old backups.
In the event I decide to start all over again, will there be a way for me to "sew" the two backup files?
Or will I always have to go the silly way around?
Anybody has any idea?
Thank you for your time (machine/capsule, your choice;-)

Hi John,
no, that doesn't have anything to do with my problem.
Just look at the image below.
Time Machine thinks that the disk I've always used to do my backups has none of them.
If I open the disk with Finder, obviously they are where they should be.
It is even possible to navigate them as per the instruction reported above, but even following Pondini's advice #s B5 and B6 (which are more applicable to my problem) didn't solve the problem.
Actually, not being a coder, I'm always scared of doing more damage than good when I have a Terminal window open.
My question is: how is it possible that Apple hasn't thought of some kind of user command to tell the idiotic Time Machine software that a hard disk backup is a hard disk backup, no matter what?
Estremely frustrating and annoying: I'm wasting HOURS in trying to find a solution to a problem that should not have arisen in the first place...
Have a nice weekend
Antonio

How do you create a new trial AWS developer instance if the existing one is corrupt.

I've got an instance I can no longer connect to. I haven't done much with it so I'd like to delete it and start over. I don't see that as an option. Is there a way to do it?

Never mind. I was able to create a new one once I "terminated" the old one and waited for it to finish. I didn't want to terminate the old one because I was hoping I could pull some of my work off but since you can't create a new one without first deleting the old one, and I could no longer even connect to the old one, I went ahead and terminated it.

How do I create a new row on tab out of the last column, last row?

JDev 11.1.2.1.0.
I've seen a few topics on this but none that I think were really very good solutions.
Use Case:
On tab out of the last column in the last row, a new row should be added to the end of the table. Bonus points for setting the focus to the first <af:inputText> of the newly created row.
Complications:
1. I'm having a heck of a time trying to find a function that returns the column's displayed index. Sadly, <column binding>.getDisplayIndex() returns -1 unless the user has manually re-ordered the column.
2. Value Change Listeners only fire if there is a value change. Guess that means I need to do client/server listeners to check each and every <af:inputText> for a tab press?
3. I'm not even going to get into setting the focus. With all the templates, regions, etc. going on, it's dang near impossible.
Any ideas on how to attack this one?
Will

Hi,
You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
Once you have created your installation, install is on your new system.
The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
Hope this helps
Ray Farmer
Regards
Ray Farmer

Collaboration Area is not being create while 2 envelop RFx Creation by Purchaser

HI,
Collaboration Area is not being create while 2 envelop RFx Creation by Purchaser hence Default folders (External Area/Internal Area ) are not appearing :
Following roles are assigned to Purchaser on ECC System :SAP_CFX_USER, /SAPSRM/ST_PURCHASER
Following roles are assigned to Purchaser on cfolder System :SAP_CFX_USER
Following roles are assigned to RFC User on ECC System :
SAP_CFX_ADMINISTRATOR
SAP_CFX_COL_CREATOR
SAP_CFX_COMP_CREATOR
SAP_CFX_USER
What could be the other root cause for this bug ?

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

What do I need to do to default some values when a new row is created in a tabular form?

Hello all -
I have a tabular form which requires a few columns to be entered by the user when s/he creates a new row, but other fields in the column can just default to certain values. How do I set those default values so that the user doesn't have to be bothered with entering any data except those that MUST be entered?
An example:
Form1
REGION        COUNTRY       CITY
APAC            JAPAN            TOKYO
APAC            AUSTRALIA    SIDNEY
APAC            KOREA           SEOUL
REGION is nearly always APAC, so I want to default to that. The user can still adjust it if necessary, but I want to set it for the user, just to save having to enter a value. When the user clicks the the Add Row button, I want to load that value right away and leave the next two fields blank so the user can enter whatever they want.
Thanks!
John

Hi,
Go edit that column.
Under Tabular Form Attributes you can find options to set default value
Regards,
Jari

Disable the Textfield while editing the HTML form item

How to disable a texfield while editing the HTML form item ? It should be enabled while creating the new form entry / record.
Yogesh

Yogesh,
If you 'disable' an item and submits (UPDATE) the page, then disabled item value won't get submitted. So the disabled item value will get updated with NULL or you will get any validation failures messages, if you have any.
Better option would be, make the item read-only during Update. For the text item for which you want disable, edit that item,goto 'Read-only Conditions', here set the condition so that user can't edit it during UPDATE. Here you can use same conditions as of your 'UPDATE' button 'display conditions'
Regards,
Hari

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Creating a new page type or editing an existing one?

whenever i create a new document, i select blank page then under page type list several diffent page types. i would like to edit an existing one or create a custom one. for example, every time i create a new document i have to clear out the code and type the following...
<?php
require_once('classes/class.layout.php');
$layout = new Layout;
$layout->page_title = 'This can be different each page';
$layout->render_header();
$layout->render_footer();
?>
i tried to create a template but it always wants editable regions and i don't want it to be stuck using that system. i would like the above code to be typed out every time i create a new document. is this possible? do i have to edit some kind of system file that's xml or js? i'm using CS5 and i'm on a mac.

this is exactly what i was looking for! thank you murray! i created my own Page Type and it shows it. all you have to do is add your custom document type.
inside the DocumentTypes folder you will find the MMDocumentTypes.xml file. this file contains all of the default dreamweaver document types: html, asp, php, asp.net, etc. you can add your entries here, just use the same structure. it's safer not to modify it but create your own. so i created a CustomDocumentTypes.xml file. i just used camel-case to keep the file names consistent. according to documentation, dreamweaver checks this directory and uses the settings it reads off the xml files. so as long as it's a well formed xml file, it will try to read it. if not, it will ignore it.
next i created my default page in the NewDocuments directory. i restarted dreamweaver and there it was.

While editing the document template from library settings

I am facing this warning while editing the document template from library settings. Actually i have changed the password 2 days before. I need solution to clear this

Hello
Please check this
http://support.microsoft.com/kb/286282/en-us
Open the Office template in the original Office program where it was created.
On the File menu, click Save As.
In the Save as Type list, click Word Document (*.doc) if you are in Microsoft Word, Microsoft Excel Workbook (*.xls)if you are in Microsoft Excel,
or Presentation (*.ppt) if you are in Microsoft PowerPoint.
Give the file a name, and then save it in the Web that contains the Document Library.
Click Save.
Browse to your Document Library, and then click Modify columns and settings.
Click Change general settings.
In the Template URL edit box, type the full path and file name to the file that you saved in step 4.
Please remember to click 'Mark as Answer' on the answer if it helps you

If I create a new Apple ID and I delete the old one, Will I lose my purchases and data?

If I create a new Apple ID and I delete the old one, my books, songs, docs and all the data that my old Apple ID contained including my purchased Apps will appear in my new Apple ID and its associated Icloud?
I want to create a new Apple ID but do not lose my data and purchases, How could I do it?

Are you entering your Existing Email Address for which you have Access and also are you Entering the Password which Matches Apple Requirement ?
Enter the Email Address that you already have (like Gmail, Yahoo, MSN, Live, etc) but you have never used it for creating Apple ID before.
Passwork Requirement is Minimum 8 Characters, Alpha Numeric and Password should Content atleast 1 Upper Case and 1 Lower Case Letter. You will find the more detail on the same page when Creating Apple Id and iTunes will give you Error if the Password you enter does not match their requirement.

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Can I creat an new iCloud account and make it the primary one for my backups and buy extra iCloud storage for it? Thank you

Hey Hindfromlondon,
Welcome to Apple Support Communities. Since you are posting here, I take it you already have an Apple ID.
You can setup that Apple ID to work with iCloud. See:
Set up your Apple ID for iCloud and iTunes - Apple Support
And you usually want to stick with one Apple ID as having multiples can cause confusion (especially with purchases).
Frequently asked questions about Apple ID - Apple Support
What is an Apple ID?
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID.
For a complete list of all of the places you can use an Apple ID, see Where do I use an Apple ID.
and further down:
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Regarding iCloud storage check out
iCloud storage upgrades and downgrades - Apple Support
I encourage you to read all about it as there's lots of information out there.
Take care,
Nubz

WIJ20005 error occurred while editing the WebI document

Hello Everyone,
An error occurred while editing the WebIntelligence document.
The error don't occur when you run again.
Do you know the cause of this problem?
Please give me advice how to investigate.
Error message is as follows:
The current request has returned corrupted data. Contact your administrator (ERR WIJ 20005)
Version: 12.4.4.1557
Application server:
http://xxx.xxx.xxx.xxx:80/AnalyticalReporting/cdzisapi.wis
Stack trace:
java.lang.NullPointerException
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.reArrange(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneScrollLayout.calculateTabRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneLayout.calculateLayoutInfo(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentLayout(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.access$1900(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$f_.componentAdded(Unknouwn Source)
at java.awt.Container.processContainerEvent(Unknouwn Source)
at java.awt.Container.processEvent(Unknouwn Source)
at java.awt.Component.dispatchEventImpl(Unknouwn Source)
at java.awt.Container.dispatchEventImpl(Unknouwn Source)
at java.awt.Component.dispatchEvent(Unknouwn Source)
at java.awt.Container.addImple(Unknouwn Source)
at javax.swing.JTabbedPane.insertTab(Unknouwn Source)
at com.jidesoft.swing.JideTabbedPane.insertTab(Unknouwn Source)
at javax.swing.JTabbedPane.addTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.createUniversTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.init(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.addQueryTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.updateWithDP(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.createQueryTabs(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.load(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient2(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient(Unknouwn Source)
at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknouwn Source)
at java.lang.Therad.run(Unknouwn Source)
Environment:
[Server]
- Windows 2008 R2 Enterprise
- BOXI3.1 FP4.4 (IIS)
[Client]
- Windows7 SP1
- IE8
- JRE6 Update21
Regards,
Mayumi

Hi, Yuvraj
Thank you for advice.
>What is the default editing tool set in Prefererences --> WebIntelligence?
>Do you get issue with Interactive mode?
>
>If Advanced mode, have you tried uninstalling and re-installing Java
>and check?
It's Advanced mode.
This error occur sometimes.
And if you re-run after an error occurs, the error does not occur.
So, I guess this error has affected the Java cache file, not the Java software.
How do I check what Java cache is corrupted.
>How many reports are giving this issue?
This error occurs in various reports, but I din't know the number of reports.
>Is this issue coming on all machines or single machine?
This error has occurred in several machine.
>Do you face a similar issue when using Webi Rich Client?
This error occur sometimes, and I usually not use Webi Rich Client.
Try to check, but be difficult.
Regards,
Mayumi

CO-PA document is not created while doing the sale order cycle

Dear Experts,
I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
Ive carried a standard sales cycle that contains sales order (VA01),
and (VF04,VF02). System should generate 4
documents as follows
1) FI Document
2) CO Document
3) Profit Center Accounting Document
4) COPA Document
But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
Please suggest me where i miss the settings..
Regards,
Krishna.V

Dear Ajay,
Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
Hear we maintained all gl's chart of acc level and cost elements also.
Please suggest me...
Regards,
Krishna. v

Opening a new tab in safari opens an untitled tab while replacing the existing tab with top sites

When I open a new tab in safari, it opens an untitled tab while replacing the existing tab with top. Then if I have other tabs open, the website url of the page I was on before I opened the untitled tab freezes and is shown on each other tab.
How can i fix this problem? It is starting to occur with increasing frequency.

I had the same problem and I suspect you are using Glims. I uninstalled Glims and voila, problem gone. I reinstalled Glims and the problem returned.
Link to Glims uninstaller for those who have this problem http://www.MacHangout.com/dwnlds/Glims-UnInstall.dmg.zip
I'll report the bug and hope they fix it soon, I like Glims.

A new row being created while Editing the existing one.

Similar Messages

Maybe you are looking for