What do I need to do to default some values when a new row is created in a tabular form?

Hello all -
I have a tabular form which requires a few columns to be entered by the user when s/he creates a new row, but other fields in the column can just default to certain values.  How do I set those default values so that the user doesn't have to be bothered with entering any data except those that MUST be entered?
An example:
Form1
REGION        COUNTRY       CITY
APAC            JAPAN            TOKYO
APAC            AUSTRALIA    SIDNEY
APAC            KOREA           SEOUL
REGION is nearly always APAC, so I want to default to that.  The user can still adjust it if necessary, but I want to set it for the user, just to save having to enter a value.  When the user clicks the the Add Row button, I want to load that value right away and leave the next two fields blank so the user can enter whatever they want.
Thanks!
John

Hi,
Go edit that column.
Under Tabular Form Attributes you can find options to set default value
Regards,
Jari

Similar Messages

  • HT3775 hi, what do i need to do to play AVI file on my new macbook pro

    hi, what do i need to do to play AVI file on my new macbook pro

    Try installing Perian.
    (66938)

  • I want to pass my iMAC along to my kids. System is 10.4.11 or 10.5.11.  Have original Lion and Tiger OS discs.  What do I need to do to set it up for a new user?

    I want to pass my iMAC along to my kids. System is 10.4.11.  Have original Lion and Tiger OS discs.  What do I need to do to set it up for a new user?

    I'm having to guess at which iMac you have. This forum covers three older variants of the iMac family that were made from 1998-2005 with three different processor types.
    If yours has a G-series processor, it can run neither Lion 10.7  nor Snow Leopard 10.6. If the processor is a G5 or a G4 (must be faster than 867mHz( you can install Leopard 10.5. If your plan is to reinstall the OS before turing over the computer, let us know which iMac you  have (doing "About this Mac" from the Apple menu will give the processor type--that will do for this purpose)
    If "About this Mac" says you have an Intel processor, you have a much newer iMac. Let us know and I can ask the Hosts to move it to that separate forum.
    If you wish to maintain control over the computer, you can go to System Preferences > Accounts and set up a new standard account. The user logged into that acct can pretty much use anything installing in that account but cannot install new software or modify the system. That means less chance of something bad getting on the computer but also means they wil be asking you to help install stuff as they won't have access.
    If you wish to give the kids full control, set up a new account with admin priveleges, then either strip content form your account and leave it, or simply delete it once you are satisfied that the new accout is working.
    This Apple support page is chock-full of helpful tips on manageing accounts and security in OS10.4 Tiger"
    http://www.apple.com/support/tiger/accounts/

  • HT1338 If I have my ITunes up to version 10.6.3, what do I need to get to version 10.7 for my new Iphone 5 to be able to work on my macbook to add my songs to my phone

    If I have my ITunes up to version 10.6.3, what do I need to get to version 10.7 for my new Iphone 5 to be able to work on my macbook to add my songs to my phone

    Hi Jeff,
    Apple ID (required for some features)
    Internet access5
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.itunes.com/download)
    http://www.apple.com/iphone/specs.html
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57

  • Special settings or config needed in controlling when a new plant is create

    hi,
    what setting we need to do in controlling when a new plant is created.
    regards.
    shivaji.

    Hi
    That is dependent of your CO set-up.
    Have a look to derivations rulesin CO-PA , PCA and OKB9
    perhaps some product costing
    regards
    Paul

  • Since the upgrade to IOS7, the default phone label when adding new contacts on my iPhone 5 is "Radio".  Previously the default was "Mobile" how can this be changed back to "Mobile"?

    Since the upgrade to IOS7, the default phone label when adding new contacts in my iPhone 5 is "Radio". Previously the default was "Mobile". It is a hassle as when my iPhone contacts are synched with Outlook via Exchange, the phone number I've entered on the iPhone doesn't show on the default Outlook view as it is a "Radio" number rather than a "Mobile", "Work", "Home", etc number. It is still stored both on the iPhone & in Outlook & I can still use the number to phone or SMS, it is just incorrectly labelled & hence the source of frustration.
    Apple please return the default to "Mobile" or alternatively find a way we can alter the default ourselves to "Mobile" or "Home" etc.

    The following previous discussion may help: https://discussions.apple.com/message/23846793#23846793

  • I have OS X what do I need to do to upgrade to snow leopard or newer?

    What do I need to do to upgrade to the most current OS from OS X 10.5.08?

    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order 10.9 Mavericks which is a download only.
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.
    10.9 Mavericks is available in the App Store for free.
    You can upgrade direct from 10.6.8 to 10.9 Mavericks or without going through 10.7 Lion or10.8 Mountain Lion as long as you have the Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1.
    10.9 Mavericks will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also 10.9 Mavericks doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under10.9 Mavericks.
      Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • What do I need to buy to put Microsoft word on my new MacBook pro

    What do I need to buy to put Microsoft word on my daughter's new MacBook air?

    Purchase and download Microsoft office for Mac.  There is a trial available.
    http://www.microsoftstore.com/store/msstore/list/categoryID.50726500?WT.mc_id=po intitsem_US_OMac_generic_2011_upgrade&wt.term=+office%20+mac%202011%20upgrade&wt .campaign=%24**5+-+Office+for+Mac+2011&wt.content=mFhrnpOq&wt.source=google&wt.m edium=cpc&WT.srch=1

  • Issue : OBIEE applying default prompt values when pressing return button

    Hi All,
    On my dashboard, I am showing a summary report. This summary report has a link to detail report. I have provided a link for detail report just below the summary report on dashboard. Following is the issue which I am facing
    [1] I run the dashboard for a particular prompt value on the dashboard. Let's say a date value = '1/1/2010'.
    (There is no default value for the prompt).
    [2] Now my summary report is updated according to the prompt value which I selected.
    [3] I click on any value on summary reports and it drill down and recalculated the metrics
    [4] Now when I click on the detail report, i get the detail report too ( in a new window). The issue starts from here.
    [5] When I click on return link from the detail report page, it takes me back to the summary report page ( I land on the report which I got from step 3)
    [6] I click on the return button under the summary report (rememeber I had drilled down) to see the report which i get in step 2
    But, when I click on the return button under the summary report, it changes the prompt value too and applies the default value to the prompt and provides me the initial summary report with default promt value. The report which I got in step 2
    Whereas what i want is when I click on the return link then I should get the report which I got in step 3.
    Why does OBIEE applies the default value when I try to return back to my original summary report. Is this an OBIEE feature or I have some setting issue ?
    Hope I have been able to explain the scenario!
    Can anyone please reply on this. Any help would be much appreciated.
    Thanks,
    Ronny

    hey kart,
    the issue is not about going back to the summary report ...the issue is when i click on the return link below the summary report after returning from the detail report ( which opens in a new window) then it takes me to the initial summary report ( which was loaded by default when the dashboard was loaded) with all the default prompt filters whereas my requirement is to go back to the summary report with the filters which users selected from the prompt ....
    Please let me know.
    Thanks,
    Ronny

  • How to get default input values when using promt user for input

    I use "promt user for input" to input some values. The messageboard appears with blank boxes then I will input  new values. I want to make some default values in this blank boxes so that I needn't to enter new values. Is it possible ?

    Right click on he Express Vi terminal and choose open Front panel to convert it into a standard vi. Then open it. Enter a default value for each control, then right-click on the controls and go to data operation > make current value default.
    Message Edité par chilly charly le 11-18-2007 12:52 PM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • How can I set my default email address when sending new messages

      I have 2 accounts in my Mail Preferences, hotmail and gmail.  I have tried to set it so when I send a message to a new recipient  it is my gmail one that is used as default.  However,  it is thehotmail account that is always ticked first.
    I would like to set my mail preferences so the gmail is my default first choice in sending new messages and is ticked as my default email address.
    thanks for reading
    gus

    gus,
    Have you gone to Mail>Preferences...>Composing>Addressing:> and selected "Send new messages from:" your preferred account?

  • What do I need to support my FireWire 800 gear on a new iMac

    I need to replace my antique mac pro 1.1
    I am now retired and my needs tend more towards games than av creation so the new Mac Pro is not only overkill but the dual video I here is not optimized for games in any case.
    The problem is all of my existing FireWire 800 gear and no FireWire ports on the new iMac designs
    I guess I need to buy an external thunderbolt case for the 4 2 terabyte drives in the old pro do any of the external T-bolt cases offer good FireWire 800 support (full speed support) for all of my old gear?
    Are there other ways to support these devices than an external t-bolt case for sata drives?
    And for a game playing iMac is a fusion drive or a large solid state drive best choice bearing in mind I will have about 10 terabytes of FireWire and t-bolt external storage ( I was thinking of making the drives in the required t-bolt external case a raid array for best performance)
    So what external t-bolt drive case should I buy and if it does not support a set of FireWire 800 ports what external t-bolt gadget for that support should I buy?
    Thanks

    Windshadow99 wrote:
    I looked at those but would it not be far better to have a gadget that plugged into a t-bolt port and then had a bunch of FireWire 800 ports on it? There must be lots of folks that like me invested in FW800 gear with their older computers and need something like this.
    Perhaps, though as with anything it depends on your needs. I don't know of any such device, though. All the Thunderbolt docks I've seen that have Firewire at all have only a single port. You could use a TBolt to FW adapter with Thunderbolt ports in a dock, though. A Firewire hub isn't a lot of good other than providing multiple connectors since all devices are on the same FW bus and hence not really much different from daisy-chaining. There's certainly no performance improvement and probably not much in the way of stability improvement either.
    I was told a long time ago back in the mac 2fx sccsi days that daisy chaining things should be avoided and  giving things their own pro was better does this advice sill hold good?
    SCSI was very different (and usually wasn't a problem as long as it was terminated correctly). Daisy-chaining FW is different, though it very much depends on the devices and the sort of throughput you need. Daisy-chaining Thunderbolt should be no problem at all as long as the devices support it.
    Regards.

  • My computer crashed, and I lost everything, includingmmovies and music not downloaded in I-tunes...what do I need to do to preserve these files when I upgrade to IOS 5 with the cloud service (I-pad 2)

    I had a computer hard drive crash, and lost everything, including music and video I had transferred to my I-Pad 2 from other sources.  The upgrade to the current OS warns me that I will lose all non-Apple downloads when I upgrade.  I have lots of non-Apple music and videos that I cannot replace.  What do I do????

    Betsy, the place to look for the conduit settings is not in Palm Desktop, but in the HotSync Manager.  This is found in the little Hotsync icon in the bottom right tool tray of your computer.
    Click on it, choose Settings, then Applications.  Highlight the conduit you wish to change, then click the "Configure" button.  Choose the direction you wish.  Don't click the "Default" button, or this will be the direction that will occur every time.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • What do I need to install on server BO to make a new connection to DB2 ?

    Hi experts,
    i'm on a RedHat Linux server, and the CMS DB is on Oracle, and all the universes are connected to Orale.
    Now I have to do a new universe that points to a new DB2 v9.7 data warehouse.
    1) What do I have to install on server to make my DB2 connection work?
    2) I've seen there are 2 diferent type of connection to DB2: "Client IBM DB2" and "Driver JDBC", what is the better connection?
    Best Regards
    Camillo Rospigliosi
    BO XI 3.1 SP2
    Linux RedHat 5 server
    Oracle 9 repository

    Hello,
    you have to install the DB2 Client on your BO Server. Please install the 32Bit Version ob the Client. After the Installation you have to cataloge your DB2 Database(s).
    Also you have to install the DB2 Client on your Development PC where you develope your DB2 based Universes.
    Regards
    -Seb.

  • Default error comes when i Open Opportunity quick create

    Dear all,
    When i open quick create of opportunity via account.
    We get an error message. Is there something i am missing in scoping?
    Error Message : Please enter a party with role Sales Unit.
    Regards,
    Dhruvin

    Hello Dhruvin,
    The default error is nothing but an employee (owner) who is not assigned to a Sales Unit.
    You can either assign the employee responsible to a Sales unit under the Organizational Management workcenter which will enable automatic population of the Sales unit when you are creating an Opportunity and assigning an owner & you shall not get this error anymore.
    OR
    If you do not want to do this then while creating an opportunity you can assign an owner & select a Sales Unit under Opportunity creation screen for this owner which shall remove this error.
    Hope this helps!
    BR
    Ankur

Maybe you are looking for