A pending problem of x200 LCD

There is a pending problem of my thinkpad x200 .
I found that the x200 LCD is  LTD121EWVB made by toshiba.
When i looking through a camera to the LCD of the notebook, Parallel stripes appers and flashing,and the eyes feel sotired after a short time.this problem does not exist in many othe notebook's LCD such as sony,samsung etc.
Anyone can help??

The refresh rates of the camera and of the LCD don't match. Nothing you can do about it, I suppose.

Similar Messages

  • Bytes Pending Problem still Prevails;

              Sorry to say that my byte pending problem is still around.
              There are
              no applications exceptions.
              no runtime exceptions.
              I also made sure that the deployment discriptor declares the TX boundry as NEVER
              The problem that I see at the moment is that once NotificationMDB goes out of commision
              (meaning bytes pending starts increasing) even if I reddeploy the jar file. Message
              on reaching the notification topic do not fire the MDB's
              Could somebody explain possible reasons for this behavior.
              Also I have another process that subscibes to the same topic. but that only takes
              effect when i am communicating with my system sysnchronously.
              Here is the deployment discriptor for
              NotificationMDB-ejb-jar.xml
              <ejb-jar>
              <enterprise-beans>
              <message-driven>
              <ejb-name>NotificationMDB</ejb-name>
              <ejb-class>mypackage.NotificationMDB</ejb-class>
              <transaction-type>Container</transaction-type>
              <message-driven-destination>
              <destination-type>javax.jms.Topic</destination-type>
              </message-driven-destination>
              </message-driven>
              </enterprise-beans>
              <assembly-descriptor>
                   <container-transaction>
                        <method>
                             <ejb-name>NotificationMDB</ejb-name>
                             <method-name>*</method-name>
                        </method>
                   <trans-attribute>Never</trans-attribute>
                   </container-transaction>
              </assembly-descriptor>
              </ejb-jar>
              and
              NotificationMDB-weblogic-ejb-jar.xml
              <weblogic-ejb-jar>
              <weblogic-enterprise-bean>
              <ejb-name>NotificationMDB</ejb-name>
              <message-driven-descriptor>
              <pool>
              <max-beans-in-free-pool>200</max-beans-in-free-pool>
              <initial-beans-in-free-pool>200</initial-beans-in-free-pool>
              </pool>
              <destination-jndi-name>mysystem.jms.notificationTopic</destination-jndi-name>
              <connection-factory-jndi-name>mysystem.jms.notificationFactory</connection-factory-jndi-name>
              </message-driven-descriptor>
              <jndi-name>mysystem.jms.NotificationMDB</jndi-name>
              </weblogic-enterprise-bean>
              </weblogic-ejb-jar>
              

              Hi christian.
              you were right switching to sp2 solved the bytes pending problem on my topic
              thanks for your help
              Christian Buchegger <[email protected]> wrote:
              >Hi,
              >
              >
              >what version of WLS are you using ? Please check if this could be issue
              >061783 as documented at:
              >http://e-docs.bea.com/wls/docs61/notes/bugfixes2.html#1143510
              >and which is fixed with WLS6.1SP2. Otherwise consider to open as case with
              >BEA Support.
              >
              >
              >Regards,
              >Christian Buchegger
              >Developer Relations Engineer
              >BEA Support
              >
              >
              >Mekaiel Hussain schrieb:
              >
              >> Sorry to say that my byte pending problem is still around.
              >>
              >> There are
              >> no applications exceptions.
              >> no runtime exceptions.
              >> I also made sure that the deployment discriptor declares the TX boundry
              >as NEVER
              >>
              >> The problem that I see at the moment is that once NotificationMDB goes
              >out of commision
              >> (meaning bytes pending starts increasing) even if I reddeploy the jar
              >file. Message
              >> on reaching the notification topic do not fire the MDB's
              >>
              >> Could somebody explain possible reasons for this behavior.
              >>
              >> Also I have another process that subscibes to the same topic. but that
              >only takes
              >> effect when i am communicating with my system sysnchronously.
              >>
              >> Here is the deployment discriptor for
              >>
              >> NotificationMDB-ejb-jar.xml
              >>
              >> <ejb-jar>
              >> <enterprise-beans>
              >> <message-driven>
              >> <ejb-name>NotificationMDB</ejb-name>
              >> <ejb-class>mypackage.NotificationMDB</ejb-class>
              >> <transaction-type>Container</transaction-type>
              >> <message-driven-destination>
              >> <destination-type>javax.jms.Topic</destination-type>
              >> </message-driven-destination>
              >> </message-driven>
              >> </enterprise-beans>
              >>
              >> <assembly-descriptor>
              >> <container-transaction>
              >> <method>
              >> <ejb-name>NotificationMDB</ejb-name>
              >> <method-name>*</method-name>
              >> </method>
              >> <trans-attribute>Never</trans-attribute>
              >> </container-transaction>
              >> </assembly-descriptor>
              >>
              >>
              >> </ejb-jar>
              >>
              >> and
              >>
              >> NotificationMDB-weblogic-ejb-jar.xml
              >>
              >> <weblogic-ejb-jar>
              >> <weblogic-enterprise-bean>
              >> <ejb-name>NotificationMDB</ejb-name>
              >> <message-driven-descriptor>
              >> <pool>
              >> <max-beans-in-free-pool>200</max-beans-in-free-pool>
              >> <initial-beans-in-free-pool>200</initial-beans-in-free-pool>
              >> </pool>
              >> <destination-jndi-name>mysystem.jms.notificationTopic</destination-jndi-name>
              >> <connection-factory-jndi-name>mysystem.jms.notificationFactory</connection-factory-jndi-name>
              >> </message-driven-descriptor>
              >> <jndi-name>mysystem.jms.NotificationMDB</jndi-name>
              >> </weblogic-enterprise-bean>
              >> </weblogic-ejb-jar>
              >
              

  • White screen on my 3gs, i would like to spot the problem if it is a cable problem or an LCD problem?

    after dismantling the iphone 3gs and reassmble it again i got a white screen, i would like to spot the problem if it is a cable problem or an LCD problem?

    Steps for iPhone white screen, #1 Reset. If fixed done. If the screen becomes normal, but then again goes back to white screen, fix is new LCD Display. If remains continuous white screen after Reset, then the problem could be Logic Board or LCD Display, in this situation try a new LCD Display hoping it will fix issue, but will not if problem is Logic Board fault.
    Before opening and during all repair of iPhone 3GS make sure it is OFF. This is why you now have a White Screen, try not to make that mistake again.

  • I have problem after cleaning LCD on my SP U200

    Hi,
    I have the following problem with my U200. I routinely clean my monitor using foam LCD cleaner. But because of some reason the foam got inside the monitor, seems that it is between the trubrit and the LCD. Because of experience I believe that it was not my fault.
    For me is the sealing between the trubright and the LCD that have the problem. Now the monitor has some dirts that is mean that the foam evaporated.
    The guys at Toshiba insist that is my fault.
    Anyone faced such issue with their monitor? What was your Toshiba service centre approach?
    Best Regards,
    Pantelis

    Hello Pantelis
    Please do not be mad on me but I also believe it is your fault and you can not call for display replacement covered by warranty. I have cleaned so many LCDs in last 7 years and I have never noticed something like this. I really can not imagine how much liquid you have used to clean the LCD.
    It must be done very carefully and the liquid must be dosed as the need arises. Sorry but I do not see solution there. Maybe LCD disassembling and cleaning can help. Try to talk with technicians.

  • Problems connecting X200 laptop to TV

    I have an X200 and want to connect it to my tv.  I have purchased and connected a vga on my computer to an HDMI port on the TV with the proper cable.  I have verified the cable is working and that both of my TVs (Samsung and Panasonic which are 2 years and brand new units) are properly set up to receive video from my computer.  But, the video is not transferring from my laptop to the TV.  Pressing the control and F7 button does not solve the problem.  I have updated my laptop drivers.  What am I doing wrong?

    Hi tobyesq, and welcome to the Lenovo User Community!
    It's Fn-F7 or Windows-P to bring up the display switching menu.
    Hope this helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Problem using an LCD projector

    I've never had a problem in the past with hooking up my mac laptop to a projector an having it just work. Until today.
    I have a Macbook running 10.5.4. I used it to show movies last summer at summer camp with no difficulty. Today, when I hooked it up to an LCD projector, it wouldn't work for me. Yes, the projector recognized my laptop, but that was it. All I got on the screen was the background that you see prior to signing in (the default that comes with the computer). No toolbar, no dock, no icons, no little arrow. Just a lovely celestial backdrop. I could see everything on my computer screen, but not on the projected screen on the wall.
    Any suggestions?

    I had seen this suggestion elsewhere, but when I click on the "displays" icon in system preferences, the only tabs I see are for "display" and "color"?
    What am I missing here?
    Do I have to be hooked up to the projector to see the "Arrangements" tab, or should it be there at all times?

  • Problems with ViewSonic LCD displays?

    I have a ViewSonic VP2030b 21.5" LCD monitor hooked up to my G4 DA. The
    monitor works OK with these two exceptions:
    1. "About This Mac" info on Displays consistently says "No display detected".
    2. I frequently have to restart the G4 several times to get the monitor to respond
    and light up. Once it's finally on, it works fine.
    The installation software that comes with the monitor installs only onto my OS9
    volume, not onto OSX. Since the monitor dates from 2005, it should be
    compatible with at least the earlier version of OSX. I inquired about any
    update software at ViewSonic and was told that my install CD is the latest
    version they have for Mac.
    Is anyone using a ViewSonic LCD monitor having similar problems?

    What does it say in System Preferences > Displays? What if you click the "Detect Displays" button there?
    My Mac has a card that supports two displays. It reports the correct info for the first one, then underneath, with no break, says "No Display Detected". In my case, I know it is talking about the second display, which is correctly identified as not connected since I only have one.
    Most displays do not need any additional driver software on the Mac, so do not be alarmed if that CD will not install.
    What graphics card is this?

  • Problems after replacing LCD screen

    I fell over and cracked the screen to my ipod nano 3rd gen. (also broke my arm but that was easier to fix!). Ive just bought a new lcd screen for it and followed all the directions on how to install it. The problem im having now is it all appears to be connected right but the screen just flashes white to black and beeps. It was only recognised on my laptop as "no name" not as an ipod. Could someone please help and let me know what i have done wrong? Before replacing the screen my ipod still worked perfectly. Thanks in advance!

    Thanks man. I will take a look at it later on tonight and see what happens. From my understanding some of these LCD's have the airport built-in or is it the antenna? I think mine is one of those, But it looked like the antenna just runs on the side of the casing for the LCD display which is still intact as I only removed the actual LCD screen. I'm gonna see if the connector is in fact not pushed in all the way although I never touched it.

  • Help Please with media pending problem!!

    I've been using PP CS6 for a couple of years on a Rain system with no problems at all.  Yesterday evening I deleted several old files on my scratch disc, one of them I think contained all of the cache files for all the projects on that drive.  Now every project I open it takes forever to load the media, and I get "media pending"  Once it all does load I can't hardly play it back because it keeps locking up.  I have several projects that I have to get out and am really in a bind here, can anyone give me a hand??

    Ronin,
    If we're talking about a laptop, then are you running the 2630 or 2630qm?  Most likely the qm version, no?  It appears that the 2630qm DOES have integrated graphics:
    http://ark.intel.com/products/52219/Intel-Core-i7-2630QM-Processor-6M-Cache-up-to-2_90-GHz
    You ALSO have an NVIDIA card.  Again "Optimus" is simply an "Apple-ism" (like "Retina" or "Flash Storage") for Integrated (aka On-board) graphics working in tandem WITH a more powerful graphics card (i.e. the gtx 560m).  I would take a serious look at disabling it via the instructions in the link I sent previously.  They may not even have thought up the moniker "Optimus" when your laptop was released.  I don't know.  Regardless, when the computer tries to switch between the on-board (power-saving and weak) graphics card to the NVIDIA card, you might experience exactly the type of symptoms you've described.
    By way of example:  Take the Asus g75vx.  It comes stock with a 3630qm chip.  The 3630qm has no option for on-board graphics at all (aka Intel HD 3000, 4000, etc).  The g75vx comes with a gtx 670mx, but if paired with the "wrong" i7 mobile chip, it might just as easily have on-board (Intel HD) graphics, too.
    Another way to check might be to open up Device Manager and see what entries are listed under under Display Adapters.

  • Media pending problem after clearing media cache folder

    Hi All,
    So yesterday I was having trouble with premeire in that on some of the files it conformed it managed to screw up the audio and play a short 'loop' instead of the actual audio. I was instructed to empty my media cache folder and re-start premeire pro which seemed to have worked fine. However upon booting the program up this morning it seems as though all the clips are 'media pending' (sans a title I added late last night) and even after conforming finished nothing will preview. Would re-deleting the media cache files work? I am hesitant because this seems to be what caused the problem in the first place.
    Thanks again, it is much appreciated.

    See if this helps.
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • X200s LCD Spare Screen Part Number: LTD121EQ3B

    Hello,
    I am looking for a new LCD screen to replace my broken LCD screen for Lenovo X200s. Where I search for this LCD screen, the spare lcd screen is too expensive.
    Is there an alternative one that will fit into this screen? Can we not use any other 12.1" LED screen that will fit?
    I think it is a bad decision to buy the laptop which has such expensive LCD screen. If anyone has any experience, please advise.
    Thanks
    Kabeer.

    Hi Lead_Org,
    Thanks for the quick reply. My main issue is that: the part number LTD121EQ3B that matches the Lenovo X200s of mine is very expensive costing me around $355 + delivery charge.
    There is no cheap alternative at all. There are several 12.1" LED screens available for HP, Samsung laptops which are around $130 online. So I am regretting that I am stuck with a laptop with spare parts that are very expensive.
    I was looking for some help if someone has any experience in fitting a cheaper alternative screen to get around this issue.
    Thanks,

  • Problem with flickering LCD

    Hello, recently I've been having problems with my L300D-12y, namely with the display. After I boot Windows and start using the computer, the screen goes crazy, weird colorful lines appear, the colors are changing (cyan blue instead of white), it usually gets back to normal after 10 minutes or with gently shaking the laptop. However, not always - sometimes the flickering remains, and I have to turn the computer off and wait an hour or so before it 'settles down'. It looks like that: http://i183.photobucket.com/albums/x44/rhapthorne86/IMG_0509.jpg?t=1258287339 http://i183.photobucket.com/albums/x44/rhapthorne86/IMG_0502.jpg?t=1258287338 The problem occurs very randomly - one day I have it flickering almost all the time, then it is fine for 2-3 days, but the issue always returns sooner or later. I have found out that it is definitely problem with the display, since the issue occurs also in bios, and there are no problems at all while using external monitor. But the real problem starts here. I once have sent the laptop to service to have my HDD replaced (some nasty bad sectors), of course I also mentioned the LCD issue, but the service did nothing about it, stating that the display is flawless. Unfortunately, as the flickering occurs very randomly, I can't prove the fault in any way since I don't have direct contact with the repairing team to show them any pics or so. I was fortunate that my HDD was broken, since I would probably have to pay for unjustified warranty claim if I tried to send the PC only on account of the flickering display ... The question is: can i fix it somehow without having to send it for a repair again ? And if not, how can I prove that this issue is not my imagination? Thanks in advance.

    Hi Jim, I know long time passed by since this issue was reported. Actually I experienced for long time that flickering issue on my toshiba L300D. Guarantee was already expired (it was really matter of few months, that was a bit upsetting I must say) and after a few personal attempt (e.g., open the display and plugging better the cable connecting to the display, ..), I gave up and I use this laptop only with an EXTERNAL display. However after a while I gave up as it is not a laptop anymore. Looking around there are many reported flickering display issues related to the Satellite model. Is there a common solution? Would changing the display be an affordable solution? Is Toshiba providing spare parts?  I would like to resuscitate this laptop to pass it to younger people in the family and use this as excuse to buy a new one for me. Apart the problem with the display I was happy of this Satellite laptop, but I am not sure I want to take that risk again with a new laptop.  best,Luca

  • Problems using an LCD TV with my MBP

    I just bought a Viewsonic LCD TV. I have tried to attach my MBP to it using a monitor cable and the adapter provided by Apple. There is a "PC" input on the back of the TV. I can see my desktop wallpaper on the TV screen, but nothing else. When I start the itunes visualizer or Front Row, the screen of the TV goes blank.
    Ideas?
    Scott

    There is a "PC" input on
    the back of the TV. I can see my desktop wallpaper on
    the TV screen, but nothing else. When I start the
    itunes visualizer or Front Row, the screen of the TV
    goes blank.
    The desktop on the TV is an extension of that on your MBP. You can drag open windows onto that. To switch the roles of the screens (i.e. get the TV to be the main desktop with the menubar), there is an option in System Preferences > Displays where you see 2 boxes representing your screens: click and drag the thin white bar (supposed to represent the menubar) to the other box. Alternatively you can set the TV to mirror the MBP desktop, also available under "Displays".

  • Problem of X200 with 15 feet USB cable

    Hi,
    I have a X200 with the ultrabase and  I used to use a 6 feet USB cable connect to a HP Laserjet P2015N printer but now when I use the 15 feet USB cable and the system says USB device not recognized. and I can use the 15 feet cable to connect to another printer with my HP laptop. Any idea?
    Thanks,
    Davy

    davylo wrote:
    now when I use the 15 feet USB cable and the system says USB device not recognized.
    You  are at the limit of USB cable length for USB 2.0.... 
    Q1: How long of a cable can I use to connect my device?
    A1: In practice, the USB specification limits the length of a cable between full speed devices to 5 meters (a little under 16 feet 5 inches).
    http://www.usb.org/about/faq/ans5
    ... so use a shorter, and good quality, cable.
    Cheers,
    Bill
    I don't work for Lenovo

  • Premiere CS6 Indexing and Pending Problems - HELP!

    Gentlemen,
    Any help you can offer on this would be terrific.
    The problem is.....I have begun editing a feature in CS5, we set up a different project for each scene, 48 in total. Then upgraded to CS6.
    When I open the projects in CS6, some of them work fine. However, most of them don't, and they have the same problems, which are;
    1. All the media doesn't load. The status bar in the bottom left tells me there is xx "Remaining" (See Pic)
    2. The files don't index. Above the project window the message "Items to Index XX" appears.
    However, when I save one of these incomplete projects in CS6 and then open it in CS5, there are no problems. My scratch disks for 5 and 6 are the same.
    I've searched and searched and this appears to be a common fault, but I can't find a solution that works for me. I've tried the following;
    1. Uninstalling and re installing Premiere
    2. Updating to 6.0.3
    3. Cleaning media Cache
    4. Replacing the missing files and then reloading
    5. Temporarily removing all the preview files
    6. Leaving a project open for 16 hours to see if it slowly indexes
    None of this works. If anyone has the answer I would be very gratefull, I don't really want to restart 48 projects and I don't really want to go back to CS5, as CS6 is much better for the Matrox system.
    I'm using MXF footage, from P2, 720p. I have noticed that this problem doesn't occur with projects that use other footage types.
    My system is.....
    Windows 7 Pro 64bit
    8gb Ram
    Many Thanks in advance for any help you can offer.

    Thanks Jim,
    just tried that.....unfortunatley no luck.

Maybe you are looking for