A report for 'Responsible CCtr' and 'Requesting CCtr' in Internal Orders

Hi All,
displaing the master data of an Internal Order, in the tab 'assignment' I can see the fields 'Responsible CCtr'
and 'Requesting CCtr'.
I wonder, is ther a report in which these field are recalled?
Thanks

Hi,
T-code KOK5.
Define a sel. variant, run KOK4 with this variant to create an order group, view this order group in KOK5 and in the layout choose the fields you need.
best regards, Christian

Similar Messages

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

Report for daily production and daily sales quantities

Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

Hi,
You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
MBLNR-MKPF = MBLNR-MSEG
MJHAR-MKPF = MJHAR-MSEG
Sort the results in ERFMG-MSEG and ERFME-MSEG using
BWART-MSEG = 101 minus 102 (for production)
SOBKS-MSEG = E
BWART-MSEG = 601 minus 602 (for sales).
Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
Thanks & Regards,
Abu Arbab A

Report for Asset number and its Purahcse order number

Hello Friends,
Please give me details of report for Asset number and its Purchase order number .
Regards
Nilesh Vakil

hi,
GO to ME2N...
use SHIFT + F4..
there check for the acc. assign cata. field and input the asset and execute..
Regards
Priyanka.P

Standard report for cheq incomming and chq ougoing.

Dear All,
urgent one please.
Is any standard report for cheque incomming and cheque ougoing with document wise.
if so pls suggest me.
awaiting your valuable suggestions.
Thanks & Regards,
satishkumar.m

Hi,
my doubt is in.tr.code fb02 and after putting doc type bp(bank payables) after executing that i will get screen showing details ie., doc no., year, type do.date and posting date.
my client wants outgoing cheq details ie., to who we have issued the cheques with cheque no, date, and bank.
if we go to drilldown report of fb03 we r getting but each and every entry they cant go and drilldown it..
we cheked in fchn but that requirement wont suit to my client..
can any one suggest me.
thanks & regards,
satishkumar.m

Where can i activate a delivery report for my sms and mms?

where can i activate a delivery report for my sms and mms?
I dont seem to find it on my Iphone 5.
Its unacceptable!
Also a sound for missed calls seems to be missing to !!!
Unacceptable!
Can somebody help me please?
[email protected]

Unbelieveble and unacceptable.
Every simple phone has a delivery report....
Big dissapointment
Iphone never again.
thanks anyway

Standard report for Reconciliation report for Asset Accounting and GL

is ther any standard report for Reconciliation report for Asset Accounting and GL

hi
functional specification r reqired for this issue
regards
venkataswamy

Finance and Controlling report in combination with Cost center, GL account, Internal Order

Hi Members,
Finance and Controlling report in combination with Cost center, GL account, Internal Order.
Please provide any slandered report in all 3 dimension.
Thanks
Dileep Kumar

Search this query in FI Controlling forum am sure you will get useful results there.
This kind of reports related to Controlling are usually created using Report Writer tool.
In fact majority of reports in Controlling component is created using Report Writer only.

Responsible CCtr & Requesting CCtr of Internal Order

Hi All,
Could any one give some tips about Responsible CCtr & Requesting Co.Code for Internal Order?
1 What is the actual difference between Responsible CCtr & Requesting Co.Code?
2 Is it possible to check the amount posted to Internal Order by Responsible CCtr & Requesting Co.Code in the standard transaction? if so where to check that amount?
Thank you for your support in advance.

Dear,
Responsible cost center is the one who is responsible for the acitvity. For e.g If company has decided to undetake repair and maintainance in production assembly then responsible cost center might be an Administration Cost Center who is responsible to manage resources to get the things done and Production Cost Center is Actual Posted to cost center. Responsible cost cetner is for reporting only.
Requesting Company Code is required when you have Cross Company code accounting is active and this is required in Asset under construction scenario. If you enter the Requesting cost cetner above it then company code code from that cost cetner is dervied.
Regards,
Chintan Joshi

Report for outstanding workflows and the agents responsible

I need a report that shows all leave request workflows , with userid who created them and approver (agent), and approver's org unit and personnel number.
is there a standard SAP report that can show that? or I need to develop one?
I was looking at the SWI2_FREQ, this report shows the leave request workflows and userid who created them, but it does not report on the agent.
Regards,
Tiberiu

Hi
I think by making use of SAP_WAPI_WORKITEMS_TO_OBJECTS you can get all the workitems who created the leave wokritems.
Regards
Pavan

Report for Open PO and ASN.

Hello All,
We need a report that shows all parts ordered and not received. It would be a combination of the open orders and open ASN's.
Do we have any report that can satisfy this request.
Thanks in advance.
Forum Shah

Hello All,
Thanks for your reply.
I want to create a new report
The RECORD SELECTION FIELDS in this new report should include the following:
1.     Plant Number =      (should be mandatory field)
2.     Vendor Number =
3.     Material Number =
4.     Purch Doc Type =
5.     Purch Doc Number =
6.     Material Type =
7.     Item Category =
8.     Account Asgn Category =
9.     Confirmation Cntl Key =
10.     Due Date =
The OUTPUT COLUMNS in this new report should be export-ready to Excel (ALV), and include the following columns:
1.     Plant Number =
2.     Plant Name =
3.     Vendor Number =
4.     Vendor Name =
5.     Purch Doc Number (both PO and SA) =
6.     Line Number =
7.     Material Number =
8.     Material Description =
9.     Material Type =
10.     Item Category =
11.     Account Asgn Category =
11.     Confirmation Cntl Key =
12.     Qty Due = Original qty u2013 received qty
13.     Date Due =
   (repeat QTY and DATE for all open releases)
14.     ASN Number (if ASN has been recorded in SAP) = EKES-VBELN
Now i am having issue while developing logic for delivery dates, Inbound delivery and GR.
When i create IB my remaining open quantities should be seen. And when I am doing GR whole line should get disappear.
I tried MDBS, EKET and EKES table. But i am not able to link delivery dates, due qty, inbound delivery and GR qty.
Please suggest.
Thanks in advance,
Forum Shah

Report for Qty Contract and Value Contract with PO release exceeding limits

Hi All,
Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
Thanks in advance!

hi Duke,
If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
So, there is no report for the same...
Hope it helps...
Regards
Priyanka.P

Report for Req Material and Issue Material for Project/WBS

Dear All,
My client need a report for a WBS element-wise material required and material issue with value.
Let me know if any standard report avialble for same??
Or Incase of devlopment which are the tables we can use to Get req qty and issue qty of materials?
Thanks and Regards,
Atul R. Rajmane

Dear Shirkant,
Thanks for your input. I am using CN52N report.
I this I have selected Req Qty, Qty Received, Qty Withdrawn, Shortfall Qty. I am getting figures in Req Qty, Qty Withdrawn, Shortfall Qty but I am not able to get Qty Received figure. Let me know how I can get it i.e. for this any Note is required or any other configuration??
If I can get this figure than I can use this report for requirement.
Thanks and Regards,
Atul R. Rajmane

Report for daily production and daily sales

Can you any body Please let me know which fields we should pick to create custom report containing production qty and sales qty day wise for each material

Hi Veesh,
Whats the scenario you using there? i mean to ask
Discrete
REM
or
PP-PI
Thanks & Regards,
Abu Arbab

Report for Partial Invoice and pendinf Invoices

Hi all,
We need a report for Partial Invoices /Pending Invoices done w.r.t. Purchase Orders with PO document type as one of the selection option.
We have tried ME80FN, please suggest if there is any other report available.
thanks,
Prashant Rathore

hi,
check ME2N or ME2M with proper selection paramter value...
and get results...
or
check PO history EKBE table...
Regards
Priyanka.P

A report for 'Responsible CCtr' and 'Requesting CCtr' in Internal Orders

Similar Messages

Maybe you are looking for