A user that consumes a Web service is authorized to use then in BackEnd?

Hello,
I need to help me please
Can you validate that a user that consumes a Web service is authorized to use this service?.
I mean, I have a backend system, which has an RFC, which we published in PI as Web Services, and a third application consumes it with SOAP Adapter. How I can check that the user is consuming the service is authorized (role / profile) in the backend to run this service?
I searched SAML, but I will not check certificates, I need to check that the user is authorized in the backend, do I need IDM?
Thanks in advance.

Hello,
Please go to back end system and see the authorization profile of the user consuming the service. He must have SOAP Run time aurhorization for object S_SERVICE for the specific service. Also, the user needs application authorization for the underlying RFC call.
Thanks,
Venu

Similar Messages

Handling of SOAP Faults in SOAP Clients consuming PI Web services

Hi there,
the following is in regards to SOAP fault error handling in a SOAP client that consumes a Web Service published by PI.
I have been reading a number of threads and blogs in regards to this topic and I am still left with some open questions which I hope to get some final answersclarifications through this thread.
In particular the blogs
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI      - Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
XI: Propagation of meaningful error information to SOAP Client     - XI: Propagation of meaningful error information to SOAP Client
have caused by attention.
Both of these threads are realating to the Fault Message type one can use to return errors back to a SOAP Client (.Net, Java, etc.).
In our scenario we published a number of Web Services through PI that provide functionality to integrate with an R3 back-end system using inbound ABAP Proxies.
The services are standardised and will be consumed by a number of .NetJava applications and systems. The reason for the use of ABAP proxies is the customer specific application logic that is executed in the backend system. The Web services are synchronous and don't use ccBPM in the middle. Transformations are performed in PI combined with various lookups to set default values before the message is passed into the ABAP Framework of the R3 back-end system. The lookups are done against the R3 back-end system using the PI RFC Lookup feature.
The inbound proxies currently return application errors as part of the response message back to the SOAP client. For more critical errors we introduced the use of Fault message types as the method to return the information back to the SOAP Client. This is all working satisfactory.
The questions I have are as follows.
1. When an error occurs at the IE level (e.g. mapping error), ABAP Proxy framework level (e.g. conversion from XML to ABAP format) or Adapter Framework level (Adapter releated error) a different SOAP fault message structure is returned to the SOAP Client than the one    used for the application errors. The SOAP fault message structure used in this case is the standard SOAP fault used by PI to return system errors back to the caller. For those SOAP fault messages there is no payload generated that could be mapped to the SOAP fault structure used for the application errors. This would be preferrable as there would be only one Fault message structure used for both inbound ABAP proxy generated fault messages and PI generated fault messages.
Also the error messages generated by PI can be quite cryptic and difficult to interpret at the client end and could be filtered     ranslated during message mapping if the payload of the PI generated SOAP fault message could be accessed in a message mapping.
Point 3 of the above thread 2759 indicates that this would be possible but doesn't outline how. Could somebody please clarify this for me as I don't believe that this is really possible ???.
My idea instead was to use the PI SOAP fault message structure to also return application errors. Therefore I would create a Fault message type that matches the PI SOAP fault structure. This would enable the SOAP Client to handle only one SOAP Fault error structure. Would that be something to look into instead ?????.
2. We have been looking at using the integrated WEB AS SOAP adapter instead of using the AF Sender SOAP adapter. While playing with this we encountered differences in the content returned through the SOAP fault generated by PI. A sample is below. Shouldn't the content of these SOAP faults be the same if the error that caused it is the same. Also the SOAP fault returned by the IE SOAP adapter is much more    useful in this particular case. Both errors below are the same, a conversion error from XML to ABAP took place in the inbound ABAP proxy framework of the back-end system.
SOAP fault returned when using SOAP Sender adapter of AF
<!see the documentation>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIProxy:PARSE_APPLICATION_DATA:
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:455)
     at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:134)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:916)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
SOAP fault using integrated SOAP adapter of PI IE
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>System Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context/>
               <code>ABAP.PARSE_APPLICATION_DATA</code>
               <text>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXSBE20FF604BAFEF8D990A XML Bytepos.: 564 XML Path: ns1:CreatePORequest(1)POHEADER(2)COMP_CODE(1) Error Text: Data loss occurred when converting ############################## Kernel ErrorId: CONVT_DATA_LOSS))</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
I have been reading threads for hours without being able to find one that answers questions 1 or provides a blog that outlines the approach one should take for error handling in SOAP clients that consume PI Web Services (and covers both PISystem generated faults and faults raised in Proxies).
There may already be a blog or thread and I just missed it.
Any comments are welcome.
Thanks. Dieter

Hi Dieter,
As Bhavesh already mentioned fault messages are used for application errors. The same is described in SAP XI help:
http://help.sap.com/saphelp_nw04/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
In case of system error (e.g. field length too long in proxy call or error in XI/PI mapping) there seems to be no standard way of handling it and propagating the response to the consumer of webservice.
Each system error is not recognized by SOAP adapter and SOAP adapter exception is raised.
The only bizzare solution that I can see is developing an adapter module and transport wrong message to standard fault message before delivering it to adapter engine:
http://help.sap.com/saphelp_nw04/helpdata/en/a4/f13341771b4c0de10000000a1550b0/frameset.htm
Kind regards,
Wojciech
btw nice thread

Stumbling...Consuming a Web Service

I have written much code to publish and consume web services under MS .NET. Now I need to do the same in Java on an Oracle Portal platform. The help/docs were quite useful in getting me to create the code for the web service and the stub for accessing a web service. But now I'm suddenly lost. The stub for the web service client has a method with signature that takes Elements and returns a Vector. It appears that "Element" refers to an XML Element (probably created via DOM) and that "Vector" is a Vector of such Elements as returned in the response. I assume that there must be a way of creating these elements and of extracting the results from the ones returned in the Vector - something short of developing my own DOM parser. But the jDeveloper help is clueless on this topic. The index for help contains nothing on DOM, Document Object Model, Element, and so forth. When I go the forums, it appears that everyone already knows the secret but I'm standing in the cold. The popup tips know nothing about Element, even if I import org.w3c.dom. Where is the help/docs on this... or some sample code? I'm sure that the solution is quite simple -- probably a couple of lines of code. In summary, all I want to know is how to get between "String myWebCall(String)" and "Vector myWebCall(Element)" so that I can pass parameters and see the response. Am I stupid? (...is my wife right?)

James, unfortunately the consumption of .NET document style Web services takes a little bit of work. The stub generator, as you note will generate a client but results in an XML element rather than a string. What this means is the magic sauce you refer to is called a bit of handcoding ... Read on for a sample.
The good news is the summer release of Oracle9i JDeveloper the code will be automatically generated for .NET services. You won't have to parse any XML as below but get back the string arguments you are expecting. Sorry it is yet to come.
However, in the meantime, to give you a hand on how to construct a client based on a working example find below some code from a class MainClient.java that consumes the Web service LocalTimeByZipCode off of XMethods.com - its WSDL is located at:
http://www.alethea.net/webservices/LocalTime.asmx?WSDL
Just go to http://www.alethea.net/webservices/LocalTime.asmx to see what the service is expecting versus readin the WSDL. If you have been working with .NET you will know this.
Then point JDeveloper's stub/skeleton generator at this WSDL (or conversely your own service) and then create the client, MainClient.java with the following code (note the package I am using is mypackage1). In your JDeveloper libraries you should only have to include "Oracle SOAP", "Oracle XML Parser V2" and "Oracle9i JDeveloper Runtime" (as usual). Hopefully this code sample gives you how to tackle it now.
package mypackage1;
import org.w3c.dom.*;
import oracle.xml.parser.v2.*;
import java.util.Vector;
import java.util.Enumeration;
public class MainClient
public MainClient()
XMLDocument doc = new XMLDocument();
Element top = doc.createElementNS("http://alethea.net/webservices",
"tns:LocalTimeByZipCode");
Element zip = doc.createElementNS("http://alethea.net/webservices",
"tns:ZipCode");
Text text = doc.createTextNode("text#");
// Set the zip code parameter
text.setNodeValue("94116");
zip.appendChild(text);
top.appendChild(zip);
LocalTimeStub lts = new LocalTimeStub();
try
System.out.println("Sending:");
((XMLElement)top).print(System.out);
Vector response = lts.LocalTimeByZipCode(top);
System.out.println("Received " + response.size() + " element");
Enumeration enum = response.elements();
while (enum.hasMoreElements())
Object o = enum.nextElement();
System.out.println("Returned a " + o.getClass().getName());
if (o instanceof XMLElement)
XMLElement xml = (XMLElement)o;
xml.print(System.out);
else
System.out.println("Returned " + o.toString());
catch (Exception e)
e.printStackTrace();
public static void main(String[] args)
MainClient mainClient = new MainClient();
Mike.

Issue in consuming a web service

Hi All,
We are consuming a Web service ( Microsoft Share point ) through our Web dynpro Application.
Every time we consume the web service , there is a popup for authentication to connect to the Share point server. The problem is that the popup actually appears in the SAP GUI client and not as a web based popup hence it does not appear in the Web dynpro Application.
On analysis in SOA MANAGER , it was found that the Logical Port that we make use of to connect to the Web service has a configuration of entering the User Name and a password.
The Question is, Is it Mandatory to supply login credentials to the server from which the web service is consumed ? or is there any other configuration/setting where we can consume the web service without login credentials ?.
Any pointers/OSS notes are very much Appreciated.
Thanks !

hi,
check out these links :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/30f1b585-0a01-0010-3d96-ad0ea291c4f9
I hope u shud b clear wid ur query

ERROR Consuming external Web Services from JDE E1

Hello everybody,
I am trying to consume external web services from JD Edwards Enterprise One. For that, I have followed "Consuming External Web Services Tutorial".
I have followed all the steps successfully, but when the final test called from an interactive application to the business function that I had created in C get the following error messages in the log file:
[WARN ] JDE - [RUNTIME] *ERROR CallObject@13d346d: CallObject.executeRequest(): Problem executing function [consumingWS] lib [CALLBSFN] GetProcAddress failed. Please see Enterprise Server log for details. Business function cannot be found user:JDE Env:DV900*
[SEVERE] JDE - [RUNTIME] FormEngine.doEvent(): BSFN failed and need roll back!! | Form Name : P5500055_W5500055A com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function consumingWs.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function consumingWs.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
at com.jdedwards.runtime.engine.form.FormEngine.doEvent(Unknown Source)
at com.jdedwards.runtime.vtcomponent.form.VTForm.doEvent(Unknown Source)
at com.jdedwards.runtime.engine.ButtonEngine.onClick(Unknown Source)
at com.jdedwards.runtime.vtcomponent.VTButton.onClick(Unknown Source)
at com.jdedwards.runtime.vtcomponent.VTButton.processVirtualEvent(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.processVTEvent(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.processEventLoop(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.run(Unknown Source)
at com.jdedwards.base.util.ThreadPool$WorkerThread.run(Unknown Source)
I have tested:
1) Incorrect OCM for BSFNs.
Mapped to development Enterprise Server, so it was failing to find the BSFN.
2) Increase heap space for Java.
3) Business Function Location (C/S): "Both Client & Server Function"
4) Link the Business function with its parent DLL (CALLBSFN.dll)
I'm not sure I'd done well...
5) Update Package
From Buildlog.txt I can see the following error:
Copying \\ORACLE-JDE\E900\DV900\package\DV900FB\lib32\sCALLBSF.lib to \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\sCALLBSF.lib
Copying \\ORACLE-JDE\E900\DV900\package\DV900FB\work\jdertdll.c to \\ORACLE-JDE\E900\DV900\package\DVU100427\work\jdertdll.c
Generating Makefile: E:\e900\DV900\obj\CALLBSFN.mak
B5500055 : Not checked into pathcode, excluded from the build
.Makefile generated.
Building business functions.
************CALLBSFN************
jdertdll.c
Creating library \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\CALLBSFN.lib and object \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\CALLBSFN.exp
CALLBSFN.exp : error LNK2001: unresolved external symbol _consumingWS@12
\\ORACLE-JDE\E900\DV900\package\DVU100427\bin32\CALLBSFN.dll : warning LNK4088: image being generated due to /FORCE option; image may not run
To not build the business function is not possible the package deployment for the server becomes aware of the presence of this business function...
But I have not managed to solve the problem, do you have any idea?
Thank you and regards.

Hello again,
I have modied OCM record with a correct BSSV (the name and the port number were wrong).
And other thing that I have tested is change the parent DLL with a new DLL created by me (Object Name: CALLWS.dll, Product Code: 0, Product System Code:0) and the error is:
*ERROR CallObject@25b780: CallObject.executeRequest(): Problem executing function [invocarWS] lib [CALLWS] LoadLib failed.Please see Enterprise Server log for details. Library in which business funtion resides cannot be loaded user:JDE Env:DV900*
[SEVERE] JDE - [RUNTIME] FormEngine.doEvent(): BSFN failed and need roll back!! | Form Name : P5500055_W5500055A com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function invocarWS.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function invocarWS.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
     at com.jdedwards.runtime.engine.form.FormEngine.doEvent(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.form.VTForm.doEvent(Unknown Source)
     at com.jdedwards.runtime.engine.ButtonEngine.onClick(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.VTButton.onClick(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.VTButton.processVirtualEvent(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.processVTEvent(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.processEventLoop(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.run(Unknown Source)
     at com.jdedwards.base.util.ThreadPool$WorkerThread.run(Unknown Source)
It seems like it is not possible to find the CALLWS dll... Althought it was built and compiled without errors and warnings...
I would like to debug the Business Function in C from Microsoft Visual Studio 2005, but I can't, because breakpoints are disable.
I have followed the following manual:
E1: BSFN: Debugging Business Functions Using Visual Studio .NET 2003, 2005 and 2008 (I have founded it in Oracle Support (Metalinki)).
And here they say:
"It is a normal feature of visual studio 2003/2005 to disable break point at the start of a debug session and display a warning saying no symbol is loaded. Break point will only be activated on demand when the code to debug is loaded in to the runtime memory".
I think is necessary add the referency with parent DLL (in my case, CALLWS.dll) but I don't know how can I do it. I have tested to insert in Business Function's source code the following line:
"#pragma comment(lib,"CALLWS.dll")" to force to include it, but when it was built:
************CALLWS************
B5500055.c
Replacing B5500055.obj
jdertdll.c
Creating library E:\e900\DV900\lib32\CALLWS.lib and object E:\e900\DV900\lib32\CALLWS.exp
LINK : fatal error LNK1104: cannot open file 'CALLWS.dll'
Microsoft (R) Manifest Tool version 5.2.3790.2075
Copyright (c) Microsoft Corporation 2005.
All rights reserved.
mt.exe : general error c10100b1: Failed to load file "E:\e900\DV900\bin32\CALLWS.dll". The system cannot find the file specified.
Adjusting DLL load addresses . . .
************Build Finished************
I don't understand nothing, because the path is totally right.
Any help is appreciated!
Thank you and regards.
Edited by: user12085357 on 29-abr-2010 2:55
Edited by: user12085357 on 29-abr-2010 3:02

SOAPFaultException with wsse:Security Tag consuming a Web-Service

hello,
i'm trying to consume a Web-Service of a Document-Server implementing the new CMIS-Interface.
When i call the Service i get the exception:
javax.xml.ws.soap.SOAPFaultException: An error was discovered processing the <wsse:Security> header
my code (in an EJB 3.0 of NWCE 7.1 CE Server) is as follows:
@Stateless(name="DocRepBean")
public class AlfRepBean implements DocRepLocal {
     @WebServiceRef(name="RepositoryService")
     private RepositoryService rService;
     public String repServiceList ()
          String result = "";
          RepositoryServicePort rPort = rService.getRepositoryServicePort();
          try
               String rList = "";
               for (CmisRepositoryEntryType rEntry : rPort.getRepositories())
                    rList = rList + "REntry:ID="+rEntry.getRepositoryID()+";Name="+rEntry.getRepositoryName()+";URI="+rEntry.getRepositoryURI()+":";
               result = rList;
          catch (Exception ex)
               result = "!Exeption:" + ex.toString();
               ex.printStackTrace();
                        // here the exception is thrown
          return result;
Is there maybee a problem with authentification? but how can i set user and password calling that service then?
Sorry for this maybe easy questions but i'm new in consuming other webservices.
regards
matthias hayk

Found solution for this particular problem myself but ran into an follow-up error

No result while creating a service consumer with Web Service Wizzard

Hi,
I've tried to create a service consumer with Web Service Wizzard in SE80 by using URL/HTTP Destination but nothing happens. After the popup with logondata for the WSDL I get the CRM start screen and nothing has been created in the given package.
technical details:
I use a CRM 5.0 system with SP15 (SAPKB70015).
I created the provider service at a 7.10 system with SP5 (SAPKB71005) via SPROXY, SOAMANAGER and WSPUBLISH and get the WSDL-URL from Service Registry.
The Service Registry of the 7.10 system serves as central Service Registry.
Has anybody an idea ?
Christoph

Guy,
Thanks for your reply.
This problem has been solved. Since I haven't turned on everything that to use transaction SOAMANAGER needs. After complete the switch-on works, the problem never happens again.
Thanks again.

Error when consuming a web service in CF 11

I am consuming a web service in ColdFusion what was written in .NET. Some methods of the web service work fine, but some we get the below error. We have identified the issue is the name of one of the properties in the web service appears to be the issue. The property name is ID. This is a very common property name so I would think someone has run across this before. It appears that maybe ID is a default property for Axis? I can dump the method that works and I see there is a getID() method with a return type of org.apache.axis.types.Id.
If we change the name of the property to something other than ID it works, but this will cause us to refactor a lot of code.
Here is the error I get when I try to call GetRoles method, which contains an ID property:
Cannot perform web service invocation GetRoles. The fault returned when invoking the web service operation is:
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: org.xml.sax.SAXException: For input string: "i1"
java.lang.NumberFormatException: For input string: "i1"
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:org.xml.sax.SAXException: For input string: "i1"
java.lang.NumberFormatException: For input string: "i1"
at org.apache.axis.encoding.ser.BeanDeserializer.onStartElement(BeanDeserializer.java:462)
at org.apache.axis.encoding.DeserializerImpl.startElement(DeserializerImpl.java:393)
at org.apache.axis.encoding.ser.BeanDeserializer.startElement(BeanDeserializer.java:154)
at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java: 1048)
at org.apache.axis.message.SAX2EventRecorder.replay(SAX2EventRecorder.java:165)
at org.apache.axis.message.MessageElement.publishToHandler(MessageElement.java:1141)
at org.apache.axis.message... ''
I am running CF 11 Update 4.

I am not passing any parameters to the method (it has no parameters). On the ColdFusion side I do not use i1 anywhere. I will check with the .net developer on Monday to see if he is using it anywhere in his code. If he is he is using in consistently as the only methods that work from his service are those that do not have an ID property. All services with an ID property give me the same error message.

How to remove user authentication for SAP Web Service?

Hi there,
I am using SAP Web Services in my flex application. Every time wsdl url is called, the username\password window pops up. I want to remove this.
I searched in the forum and based on the discussions, I tried giving the user name password under Web Service Administration using SOAMANAGER, by selecting No Authentication option. But this did not work. I still get that pop up.
I also tried giving the credentials in SICF, under Logon Data tab of the service. This too failed. I kept getting the pop up.
Can someone pls let me know how can I remove this? If username password in mandatory to be passed, I can create a temporary username which will be used to access all of my webservices and use it. But I want to remove this authentication part when I am using the flex application ang calling the web service url from within it.
Appreciate your help.....
-Deepak

Hi,
It is a little bit tricky, because the interface has changed several times in different releases. I know that it is possible without authentification.
I remember that i defined somewhere the default client, the username and password in the ERP system to use by this web service.
Maybe it helps if you try the old transactions WSADMIN, WSCONFIG or WSADMIN2 ?
Sorry that I cannot help you more. I hope it helps.
Best regards,
Joern

Consuming External Web Services in Web Dynpro Java

Hi All,
I an trying to consume external web service in Web dynpro java using Adaptive Web Service Model.
But getting below mentioned error while executing the web service
Exception on execution of web service with WSDL URL 'D:\Web Service Project\CurrencyConvertor.asmx.xml' with operation 'ConversionRate' in interface 'CurrencyConvertorSoap'
Steps i followed are as below:
1. Created Adaptive Web Service Model for this i select WSDL source as "Local File System or URL"
In next step i select No logical destination radio button and click on next
In next step, browse the WSDL file and successfully import the WSDL file.
2. After successfully importing the WSDL file i wrote below code in Init method:
WebModel modelweb = new WebModel();
Request_ConversionRate reqConversion = new Request_ConversionRate(modelweb);
ConversionRate conversion= new ConversionRate(modelweb);
reqConversion.setConversionRate(conversion);
wdContext.nodeRequest_ConversionRate().bind(reqConversion);
3.After that execute the model - code is given below :
    IWDMessageManager manager = wdComponentAPI.getMessageManager();
    try
      wdContext.currentRequest_ConversionRateElement().modelObject().execute();
      wdContext.nodeResponse().invalidate();
      wdContext.nodeConversionRateResponse().invalidate();
    catch(Exception e)
      manager.reportException(e.getMessage(), false);
Please let me know how to resolve this.
Thanks
Sandy

Hi,
You need to use destinations for metadata and modeldata.
Configure those destination in Visula admin.
you can refer to following link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
Regards,
Shruti.

Consuming RepositoryFrameworkWS web service in WebDynpro for ABAP

HI All,
I would like to consume the below web service in Web Dynpro ABAP provided by SAP from Web Services Navigator.
RepositoryFrameworkWS
Using this web service I would like to write a file in KM repository. I am new to Web Dynpro ABAP and I am not sure how to use the below methods. The below methods will be shown once we import the Web Service on to SE80.
Please help writing the code for following methods in Web Dynpro ABAP.
CREATE_DOCUMENT
GET_CONTENT_NEXT_CHUNK
GET_CONTENT_FIRST_CHUNK
SET_CONTENT
Thanks
Krish

Hi,
I am able to call the service and create a document in KM . I am providing userid and password in HTTP destination as this service requires basic authentication. Right now I am giving the userid and password in SM59. But I want to pass the userid and password from program itself for logged in user. Please help me with the code for this.
Thanks
SK

Consuming a Web Service with WEB AS 6.40

Hello,
i try to consume a Webservice from the internet. I have configured the logical port and i created the client proxy as shown in the following real good weblog from
Thomas Jung.
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
But when i try to test the proxy in SE80 I retrieve the following error:
<CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
<CODE>SOAP:111</CODE>
<ERRORTEXT>Unallowed RFC-XML Tag (SOAP_EINVALDOC)</ERRORTEXT>
What's wrong here? Someone can help me?
Thanks for your help!
Klaus

We had the same error message for one of our Proxy Web Service calls.
We tried to use an RFC instead of the URL, and performed a TEST CONNECTION. And low and behold, we received an error message that was much more helpful than the "Unallowed RFC-XML Tag (SOAP_EINVALDOC)" message.
The problem for us was that the Server that we were trying to consume the Web service from was blocking the IP address of our Web Application Server.
We contacted the administrator, he verified that was the case, removed the restriction, and all is good now.
Here was the message we saw when we tested it in the RFC:
The Web server you are attempting to reach has a list of IP addresses that are not allowed to access the Web site, and the IP address of your browsing computer is on this list. Please try the following: Contact the Web site administrator if you believe you should be able to view this directory or page.
Hope this helps!

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

Consuming a Web Service with ABAP in WAS 6.40 (SS3)

Hi Everyone,
     Has anyone successfully consumed a web service (based on an EJB) that is published to the J2EE engine of their WAS 6.40 server by creating a proxy from the ABAP layer?
     We are encountering the following problem: When executing method of the proxy to call the Web Service on the J2EE engine, the CX_AI_SYSTEM_FAULT exception is triggered with the message "Unallowed RFC-XML Tag (SOAP_EINVALDOC)".
     This same problem has occurred with multiple web services, even though the proxy generation seems to execute without a problem. Is there some system setting that could cause this? We have run the SOAP Runtime trace, but only receive the same basic information about the problem.
     If anyone has any thoughts at all, I'd be grateful to hear them.
     Thanks,
        --Greg

Hi,
We encountered problems when consuming a foreign WS. It seems to be that RPC style WSDL isn't supported by the WAS 6.4 WS proxy. An interesting reading on this is
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/the difference between rpc and document style wsdl.article
Eddy

Consuming ABAP Web Service in Non SAP system

Hi
I have created an ABAP web service form the RFC and configured it in the SOAMANAGER. I have tested it in Web Service Navigator using the URL and it is working fine.
Now I am trying to access it from the Non SAP system using Java Code. I am able to access the WSDL using the URL from the step 1 but not able to receive any output when providing inputs.
So I am not sure if I am missing any configuration on the Provider System (SAP) or on the Consumer system (Non SAP) to access the web service. As far I have not configured anything on the consumer system. Please let me know how to consume the web service in the Non SAP system.
Thank you,
Rohit

not necessarily an answer to your question, but i find that when creating SAP web services, before we create the code for consuming them, I always test them with the SOAPUI package. with this test suite you can import the WSDL, and run individual tests, seeing the input, output, exceptions, etc. This is a good way to check the connection, the flow and the service logic, before writing any code. This will also let you know whether it is a WS issue, or an issue with your code.
just a thought, from someone who has been there...
http://www.soapui.org is where you can find the SOAPUI. It helped me out a lot.
Dave

A user that consumes a Web service is authorized to use then in BackEnd?

Similar Messages

Maybe you are looking for