A warning message is given when a daemon is started.
After missing couple weekly updates to our server, we did an update today. After the update, we got a warning message whenever any daemon is started, stopped, or restarted.
`/etc/rc.d/functions: line 11: /etc/profile.d/locale.sh: No such file or directory`
This file is provided by the filesystem package, you can grab it from https://projects.archlinux.org/svntogit … filesystem
Seems similar to https://bbs.archlinux.org/viewtopic.php?id=148162
Similar Messages
-
Warning message in workbook when execute it
Hi Experts,
When I execute a workbook ,I am receiving below warning message,
Warning: There is a condition on Customer Store ,results row suppress ,active on Customer
Warning: There is a condition on Customer PO Number ,results row suppress ,active on Custom
Warning: There is a condition on Material,results row suppress ,active on DIM1[ZDIM
After I select close warning message,it is excuting and results are shown.Today i automate the report execution.But its ended with ABAP\4 raise exception short dump and job got failed.Pls advice me how to avoid it.HI Malini,
Run the Queries induvidually in rsrt and suppress the messages in it.
Thne try to run the work Book.
Hope this solves the issue.
Regards.
Shafi. -
Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
I install from iTunes.com. Install issues the messages:
Service "Apple Mobile Device' failed to start.
Verify that you have sufficient privileges to start system services
I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
iTunes was not installed correctly.
Please reinstall iTunes
Error 7 (Windows error 126)
Tring to start iTunes from desktop gives:
This application failed to start because MSVCR80.dll was not found
Re-installing the application may fix the problem.
Further repair or remove/reinstall does not fix the problem (including after reboot)
Thie is the first time this has happened. I'm not sure where to go from here
Thanks for any help.Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
Apple Application Support
Apple Mobile Device Support
Aple Sortware Update
Bonjour
iTunes
Reboot and install/ -
FSCM UKM_BP Warning Message
Hi Experts,
When saving the business partner in UKM_BP the below warning message is given:
Customising error: display structure not defined
Display this message for this business partner again?
Yes No
Does anyone know if there is somewhere in customising to stop this message appearing?
I have checked to ensure that the business partner role for credit management was activated successfully (All steps have been followed)
I am aware this question was asked over two years ago but got no answer. I am hoping someone has found the solution since!
Regards,
NiallHello Niall,
Please give us the message no. details so that it would be helpful to the team to provide the possible solution to fix your issue soon.
You can change the status of message details in OBA5 T code.
Check this and revert us with your further queries.
Thanks & Regards,
Lakshmi S -
Warning Message in Absence Page
Hi All,
I have a requirement detailing the Following Scenario in Oracle HRMS R12.1.1
1. User selects Create Absence Entry
2. Selects Paternity Leave
3. Create the Leaves and Click the Submit Button
4. A warning Message should be issued to the User (Asking him to submit the Child Birth Certificate)
5. This should be a warning message and if the user clicks the submit button once again, he should be allowed to submit the Leave.
I have extended the concerned class in the Page and added the Warning Message.
However when submitting the leave in the Application, the Warning Message is displayed, but it does NOT allow the user to proceed.
The code is as follows:
if(absenceType.trim().equalsIgnoreCase("Paternity Leave") && gender.equalsIgnoreCase("M"))
//Change by Ravi @ 06-Aug-2010 to give a Warning Message to the User that a Medical Certificate Needs to be provided
throw new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);Grateful if you people could help.
Thks
RaviHi Ravi
throw statement throws the error and ends the execution!!!!You can try like below code
if(absenceType.trim().equalsIgnoreCase("Paternity Leave") && gender.equalsIgnoreCase("M"))
//Change by Ravi @ 06-Aug-2010 to give a Warning Message to the User that a Medical Certificate Needs to be provided
//throw new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);
OAException exception = new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);
pageContext.putDialogMessage(exception);Hope it helps!!!
Thanks
AJ -
Warning message in LI11N transaction
Warning message "Material flagged for deletion" does not appear in the transaction LI11N - Enter inventory count - for materials flagged for deletion. Tried searching SAP notes but couldnt find. Checked in 4.7, ERP 5 and ERP 6 releases but in all systems no warning message is given.
Is there any solution. I couldnt find any user exits. Tried with field exits. But I believe only error messages could be given in field-exits.
Please let me know if any other solution is possible.
RegardsTry using FM FORMAT_MESSAGE after CALL TRANSACTION.
-
Hi,
in a process I call a procedure and I have a variable out. p_erreur out VARCHAR2.
I want to display a warning message in APEX when p_erreur = 1.
Thank you for your help
JadeI found the solution:
NOT_SENT exception;
begin
P_CC (: parm1,: param2, v_erreur);
IF v_erreur =1 THEN
RAISE NOT_SENT;
END IF;
end;
after putting your message in error Process Error Message.
Jade -
To create Warning Message in Infotype -10
Dear Gurus,
I want to create warning messages in IT0010, when doing Actions. Any inputs plz .
ThanksHI
How r u Hope dong G8..... check the attributes of the Infotype
Rajeshk -
Hi guys,
I need some help with the "displaying warning message" in labview 2010 SP1 base development system. My requirement is, I would like to display a warning message (text alert) when the RPM of the pump falls below 10000 rpm. In this case I am measuring the current, voltage and rpm of a pump. Please let me know how I can get this done. I have attached the main vi and the 2 sub-vi for reference. Also let me know how I can set sound alerts in addition to text alerts when the pump RPM falls below 10000 rpm. Thanks for your help.
Raj
Attachments:
Current_Voltage_RPM-_continuous_sampling_count iterations.vi 116 KB
Current_Voltage_RPM-_sub_VI-1.vi 18 KB
Current_Voltage_RPM-_sub_VI-2.vi 17 KBHi Rajesh,
If you want to display a warning text alert ,then you can just create a text on front panel and using VI properties ,can make it as a text alert.For sound alert use sound functions .Please have a look at the attached vi.Run this vi and click visible button ,you can find an alert text with some sound.Modify your logic accordingly.
Regards,
SrikrishnaNF
Attachments:
CheckThisVi.vi 18 KB -
HT4859 iCLoud Backup warning message
iCLoud Backup warning message showed up when I turned on iPad.. I clicked OK, but it did not work. Just frozen. How can I unlock?
Welcome to the Apple Support Communities
Press Sleep and Home buttons until the device restarts -
In my personal Sandbox, I'm closing the periods from 1996..
I am receiving a warning message: the specified year 1997 is not the current calendar year.
But the warning message stopped popping when I was closing the year 2007. And again in 2008 it reappeared.
Can any one please tell me, how to set the calendar to the present year? Is this a Factory calendar or something else?
Please throw me some light.Check this link out for details:
Re: OMSY ???
This link shows you, how you can automatically get the date updated to current month, instead of doing manual work.
Now check this tcode OMSY, it will tell you your current standing of company code. If your system is following calender year, your month will say 04,2010, if fiscal year it should say 10,2010, dont worry both are same -
I am getting a warning message when i am trying to create a host-named sitecollection.
Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
While running Firefox, I got a prompt saying their was an update. I did that, but then got another message saying that it was recommended I update firefox to 4.0. I downloaded it, but never received a prompt to drag the image into my applications folder. I also never saw an image of firefox 4.0 on my desktop. Firefox 4.0 was in my downloads folder but got the above warning message when I clicked on it. I tried downloading it again, but the same thing happened. Now what? It appears that Firefox is still running, although I haven't yet tried to go to another website.
Try:
*http://thexlab.com/faqs/resetlaunchservices.html
* http://guides.macrumors.com/Repairing_Permissions -
I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud ConnectionHi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit -
My SSIS package loads data from access database to SQL Server database.
It's a straight copy. It fails with the below warnings and error message as shown below:
Error messages:
[OLE DB Source [113]] Error: There was an error with OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID] on OLE DB Source.Outputs[OLE DB Source Output]. The column status returned was: "Text was truncated or one or more characters had no
match in the target code page.".
[OLE DB Source [113]] Error: The "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]" failed because truncation occurred, and the truncation row disposition on "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
There are 3 warning messages even before I run the package. Warnings are all about the mismatch between the source and destination column sizes.
I cross checked the source and destination column sizes. The destination column sizes are fairly high than the source column sizes.
It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Thank you.It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Please check if the dev destination table has same column data types and size as compared with pre prod table
Thanks, hsbal
Maybe you are looking for
-
Vendor capacity check when creating PO
Hello Friends. We have a business process situation where we would like to check Vendor capacity at time of creating PO (NB) for raw materials to ensure that we do not place POs for more than Vendor capacity. Ideally it would be great if there is any
-
Premiere Pro won't let me drag an imported video from the Source window to my timeline
I've tried to insert it, but it won't me do that either. It just gives me a "Do not Enter" sign next to my cursor. Any ideas?
-
This is really bothering me now. I started using iDVD last week to create a DVD menu for my 23 minute iMovie project. Today, I attempted to open the project file and it doesn't load. iDVD menu loads up and I can edit drop zones, burn the disc, etc, b
-
Awesome + pcmanfm :: can't open pcmanfm if it's the only client
Hello, If you are running awesome WM + pcmanfm, can you repeat this ? : - go to a fresh tag with no clients - open pcmanfm with your keyboard shortcut Does it fail ? Me it fails. BUT - go to a tag with already open clients - open pcmanfm with your ke
-
How to download ios 6 to my ipad 2
hi, i have no idea how to update my ipad 2 with ios 6?