A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Stream 8 tablet location does not work on T-mobile broadband

On my HP Stream 8 tablet, location works fine with GPS only (GNSS on; Mobile Broadband, Wi-Fi, and Bluetooth off).
However, if I turn on Mobile Broadband and connect to T-Mobile and turn off GNSS (or GNSS on inside where there is no GPS signal) and keep Wi-Fi and Bluetooth off, the location gives very odd results. Last week the map showed Phoenix as my location (I am actually located in San Francisco). This week, it gives Brentwood or Clayton, CA, both more than 30 miles away.
HP tech support said call T-Mobile. T-Mobile said they had occasionally seen equally odd locations.
I went to a nearby T-Mobile store. They had a Samsung Galaxy Tab 4 which always gave a correct location, within 100 feet using T-Mobile alone. Manually moving the map to a different location in an attempt to confuse it and turning it on and off, it would still find the correct location. No surprise there, my three year old Virgin Mobile LG android cell phone does just as good a job at finding locations.
(The T-mobile store also had an iPad Mini 3 that I was able to confuse. On T-Mobile alone and clicking on My Location in maps, it produced a grid that was blank except for a line saying that it was unable to find a location, no info or link to what to do next. The T-Mobile store did not have a Stream 8. The Microsoft Store has a Stream 8 but it is not connected to Mobile Broadband.)
Does anyone else have this problem? Is my unit defective? There are times that a GPS signal is unavailable and a T-mobile broadband signal is available, and it seems that this unit should be able to find a location at least as well as my cell phone.
Thanks.

I see the same basic results, wifi=off, bluetooth=off, gnss=off, t-mobile=on. Open win8.1 map-app shows my location in LA south of the 101/110 junction. I'm in SF Bay area near San Jose about 400 miles away. Turn on wifi and map-app shows me at my real address. With t-moile only, opened win8.1 IE, went to www.bing.com/maps location also shows LA.
My only t-mobile account is the stream8 free 200mb/month data plan, don't think they have my real address anywhere. My t-mobile "phone" number is 720 area code in the Denver area. No idea why middle of LA is the t-mobile location. Must be a "feature, not a bug".

Help Needed Badly | BlackBerry INC000025111306 | BlackBerry PlayBook - Tablet button does not work, almost stuck, copper under screen, seventh repair

I was really Humilitated my RIM on this Ticket whcih i rasied.
1) I bought a new tablet in last november in 2 months i had a Charger issue
2) They said this charger issue we cannot replace with new tablet and gave me a refurbished Tablet to me .
3) Which also had same charging issue and they exchanged 2 more tablets and the last tablet which was given to me by RIM have a safety concern
- 1 Small mesh of wire is poping out from the Tablet
- Power Button is very hard and its not that easy to press,
So i raised the above ticket and was esclated internally with RMA as well and i got an update from the esclation agents that we will reply back in 2 Days i waited almost 3 weeks and called 2 times in this 3 weeks for an Update asking for a new tablet so that atleast once in all i can jeep a good 1 Tablet.
But they never bothered to call me and today i called them again and RIM gave me a call back mentioning we cannot give a new tablet we can again check this tablet repair it and give it back , If we cannot repir then give a replacement new/Old tablet,
I was wondering how can a tablet from RIM can go out without such safety concern ? How a mesh of wire can comeout of tablet so what safety norms RIM is follwoing for customer.
AM i not humilitated? since after taking all these struggle tto get a good tablet i have been considered as bad.
What RIM have to say for this, I am planing to take this to Legal department to follow how i can get a justice for this.

I would have deleted this but can't find a delete?
At any rate. got the Blackberry going again but it reset it and lost all the info, pictures and so forth.. oh well. at least it is still working.
Thanks.

HP Revolve 810 - HP Executive Tablet Pen Does Not Work

Any suggestions as to how to get the Revolve 810 to recognize the Executive Tablet Pen in "tablet mode" to be able to take handwritten notes in an application like Microsoft One Note? I have been unable to get my HP Executive Tablet Pen to work with One Note since I purchased the laptop approx. a month ago?
Any pointers/suggestions will be most appreciated.
Thanks.

He mentioned that it was a Revolve 810. That's an Enterprise product.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

X220 Tablet: Stylus does not work in Windows 8.1

EDIT: In perhaps the most embarrassing moment to have asked for help in my entire life, I restarted my computer and everything works fine now. I must not have restarted after one of the drivers was installed for some reason. This topic can be locked.
Original Post:
Hello,
I am a digital artist so I rely on the hardiness of my X220's pen/stylus/digitizer for a lot of my laptop use. This fall my laptop had a virus that required it to be reset to factory settings, and so I decided it would be a good time to upgrade to Windows 8.1 (from Windows 7) before installing any programs. I now have Windows 8.1 and it is working fine; however, my pen is not being detected by my system. My fingers are being detected on the touchscreen, so I know the touch screen works. I did not try my pen since resetting to factory settings, so I do not know whether it worked before I upgraded to Windows 8.1. I would assume the issue is a missing driver, but I could not find the right driver on Lenovo's website and the digitizer update utility produces an error when I click "Update." I was wondering if anybody had an idea for what I could do. I would assume I am not the first person to try updating to Windows 8.1 on an X220, nor the first to reset an X220 to factory settings. However, a brief search of Lenovo's support forums and of the internet has shown no solutions to my particular problem.
Here are drivers I am using that strike me as relevent, as well as their version and date. Maybe that will help with a solution. I'm sure the solution is an easy one.
HID-compliant digitizer (6.3.96... 6/21/2006, up-to-date)
HID-compliant pen (6.3.96... 6/21/2006, up-to-date)
Wacom Device (3.1.0.5 4/11/2014, up-to-date)
ThinkPad UltraNav Pointing Device (16.2.19.7 4/17/2013, up-to-date)
HID-compliant Mouse (3.1.0.5 4/11/2014, up-to-date)
Thank you! Please let me know if there's any other information I should provide!

If it doesn't work for certain applications then you may go through the followings:
GetAltTabInfo function
http://msdn.microsoft.com/en-us/library/windows/desktop/ms633501(v=vs.85).aspx
Which windows appear in the Alt+Tab list?
http://blogs.msdn.com/b/oldnewthing/archive/2007/10/08/5351207.aspx
S.Sengupta, Windows Entertainment and Connected Home MVP

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

My wacom tablet does not work correctly after updating to mavericks.

My wacom doesn't work.

Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

My web site works in deskptops,tablets BUT IT DOES NOT WORK IN ANY SMARTPHONES!

My web site works in deskptops,tablets BUT IT DOES NOT WORK IN ANY SMARTPHONES! I call Adobe support and they say that they cannot gelp me , I call godaddy and they say that i have to call adobe !!! Man I DONT KONOW WHAT TO DO !!!PLEASE I NEED SOME HELP!!! WHEN I TRY TO ENTER TO MY WEB SITE SITE IN MYIPHONE IT SEND ME TO ANOTHER OF MY DOMAINS!!! ANY ADVICE ?

I believe you have figured out the solution as the site opens fine on my end.
Thanks,
Sanjit

MenuManager in TableViewer does not work on mobile device (tablet with Win 8)

Hi
Welcome everybody This is my first post on this forum. I really hope you can help me out with this. It is kind of strange.... Ok, so I am developing RCP/SWT application, and it has to work on mobile device with windows 8 as well (10' tablet with windows Cool. So far so good - everything work pretty nice, except one thing that is really annoying. So I have this table, and user has possibility to use right click menu (context menu) on each row. Problem is that it does not work at all on mobile device. Right click on tablet is actually defined by pressing finger for longer period of time - then after 1 or 2 second menu should appear. Problem is that it does not at all. Funny thing is that when I connect a mouse using USB port to tablet I am able to open this menu Smile - it works completely fine. Menu works also with finger action when I press on empty (e.g. table without any data) I noticed that this issue is related with constructor style option SWT.FULL_FULL_SELECTION that is used for creating table. When I remove it from the constructor, right click works fine but there is not any data (no record is selected), so I can not perform any context menu action. Menu is dynamic, so depending on what data is loaded, the contain of menu changes. Main problem is that method menuAboutToShow is not called at all!. The code looks like that:
Table table = new Table(parent, SWT.FULL_SELECTION | SWT.VIRTUAL | SWT.H_SCROLL | SWT.V_SCROLL | SWT.MULTI);
table.setLinesVisible(true);
table.setLayout(myTableLayout);
createColumns(table, layout);
table.setHeaderVisible(true);
tableViewer = new TableViewer(table);
tableViewer.setContentProvider(myContentProvider);
tableViewer.setLabelProvider(myLabelProvider);
MenuManager contextMenu = new MenuManager();
contextMenu.setRemoveAllWhenShown(true);
contextMenu.addMenuListener(new IMenuListener() {
public void menuAboutToShow(IMenuManager mgr) {
contextMenu.add(new MyAction(action)); // THIS PLACE IS NEVER CALLED WITH RIGHT FINGER CLICK!
// dynamic filling context menu engine
Menu menu = contextMenu.createContextMenu(tableViewer.getControl());
tableViewer.getControl().setMenu(menu);
getSite().registerContextMenu(contextMenu, null);
Additional info: this tap-hold functionally is standard equivalent for right click on tablet device with Windows. I did not do any additional implementation for that. I think it should just work. I have several tables in my application and in all of those this problem appears. Any idea what may be wrong ?
cheers,
Pawel

I have just installed SWT Example on my tablet (from here: https://www.eclipse.org/swt/examples.php#standaloneOutsideEclipse) and this same problem appears on the table example. I think it is general problem/bug. Should I report this as a swt eclipse bug ?

Sprinboard screen does not work on android device

Hi experts,
I have a mobile application that i coded on JDEV 11.1.2.4. And i deploy via sdk android-4.3 version. I set DefaultSpringboard on adfmf-application.xml file.
When i deploy on AndroVM or another Android VM either SDK Emulator, i can see springboard screen properly. But deploy on real devices (tried with Android 4.1.1 Tablet, Android 4.1.2 Sony experia phone, Android 2.3.5 HTC phone) could not see anything, just seen black screen with header(written as applicationName) AdfmfContainerUtilities.showNavigationBar(); does not work also.
How can i resolve this?
Also i tried to create completely new adf mobile application that contains only 2 feature and applied the scenerio, it fails on real device too. I think that the problem is on loading featureList. Because when i created an amx page and set as CustomSpringboard. It works
Please help me..
brgds
I m adding my adfmf-application.xml file content, essentially i tried almost all different setting in it.
<?xml version="1.0" encoding="UTF-8" ?>
<adfmf:application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:adfmf="http://xmlns.oracle.com/adf/mf" name="MLMobilKatalog"
                   id="com.accmee.MLMobileCatalogue"
                   appControllerFolder="ApplicationController" listener-class="com.accmee.application.LifeCycleListenerImpl">
<adfmf:featureReference id="com.accmee.Login" showOnSpringboard="false" showOnNavigationBar="false"/>
<adfmf:featureReference id="com.accmee.productList"/>
<adfmf:featureReference id="com.accmee.productDefinition"/>
<adfmf:featureReference id="com.accmee.favourites"/>
<adfmf:featureReference id="com.accmee.messages"/>
<adfmf:featureReference id="com.accmee.categoryDef"/>
<adfmf:featureReference id="com.accmee.exit"/>
<adfmf:featureReference id="com.accmee.menu" showOnNavigationBar="false" showOnSpringboard="false"/>
<adfmf:featureReference id="com.accmee.menuList" showOnNavigationBar="false" showOnSpringboard="false"/>
<adfmf:preferences>
    <adfmf:preferenceGroup id="application">
    </adfmf:preferenceGroup>
</adfmf:preferences>
<adfmf:navigation>
    <adfmf:navigationBar enabled="false" displayHideShowNavigationBarControl="false"/>
    <adfmf:springboard enabled="true" showSpringboardAtStartup="false" displayGotoSpringboardControl="false" animation="none"/>
</adfmf:navigation>
</adfmf:application>

Per the release notes, Wallaby only supports Chrome and Safari at this time.
And yes, it only works with Adobe Flash Professional CS5 files. To use older Adobe Flash Professional files you can resave them in CS5 and then run them through Wallaby. This is a technology preview (not a product) and therefore has certain limitations that might not exist in a shipping product.
You mention this doesn't work on an itouch G3. You mean an iPod touch G3, yes? What version of iOS do you have installed on your iPod touch? This may be related to incorrect serving of SVG content (if you are using apache) and so you may need to update your .htaccess file in apache per the Wallaby technical tips page.
Michael O'Rourke
Adobe Wallaby Team

Excite Pro AT10LE-A-108: After JB 4.3 upgrade external BT keyboard does not work

Hi all!
After upgrade JB 4.2 to JB 4.3 does not work my bluetooth keyboard.
Pair ok, tablet keyboard sees, but not responding.
Please, make toshiba repair package or fix problem.
On other my android device (LG phone with 4.1.2) working this keyboard ok.
Sorry, my english is very bad. (Google translator)
Thank you.
[Keyboard Type|http://www.trust.com/en/all-products/18441-executive-folio-stand-with-bluetooth-keyboard-for-ipad]

Ok, please, i want downgrade to JB 4.2 for this tablet, it is possible?

Excite Pro AT10LE-A-108: After JB 4.3 upgrade BT keyboard does not work

Hi all !
After upgrade JB 4.2 to JB 4.3 does not work my bluetooth keyboard.
Pair ok, tablet keyboard sees, but not responding.
Please, makes toshiba repair package or fix problem?
On other my android device (LG phone with 4.1.2) working this keyboard ok.
Sorry, my english is very bad. (Google translator)
Thank you.
Keyboard type

I'm sorry to hear about the problem. In your case, you might want to call customer support. However, I don't believe your AT10LE-A is from Toshiba USA, and this is the forum for Toshiba USA. You should contact Toshiba in your region.
- Peter

TS3274 sound does not work on my ipad, it worked early today, but now it does not, not sure what happen

The sound on my ipad quit working, i was using it, and i went to do something, i come back to use it and now it does not work. I have it on full volume.
Can anyone help me please.
Thanks Louise

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

A2109 tablet autorotate does not work

Similar Messages

Maybe you are looking for