A3 scanning on 7510 WF printer

Hi,
I have an question regarding scanning ability on a 7510 WF printer (a3).
It shows under scanning spec, the max paper size on flatbed and adf is 216x356. This is not a3.
So in simple terms, does the 7510 printer not scan a3 but print a3.
Is this correct or is there an error in the specification.
Kind regards

Hi , Welcome to the HP Forums! I understand that you are wondering if your HP 7510 can scan A3. I am happy to look into this for you! Just a question for you for starters: What is your printer's Product/Model Number? (ie: HP Officejet 7510, HP Photosmart 7510, etc.) To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. Once I know exactly what type of printer you have, I will do some further research for you! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums. Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Similar Messages

HP Photosmart series 7510 wireless printer issue

I have a HP Photosmart series 7510 wireless printer.
My laptop is an HP Pavillion Entertainment PC dv9700.
I am running Vista Home Premium with Service Pack 2.
The printer stopped responding when I attempt to print something from the laptop, such as a web page or document. When I print a diagnostic page it goes and responds right away.
Any ideas of what I may try. When I set up a regular print job it just stays in the que and does not print.
Thank in advance.

Hello szwonders,
I am sorry to hear you are having an issue with printing with your Photosmart 7510. Thank you for your information.
I would like to help you.
I recommend Resetting your Printer first, to see if that helps.
Also, I recommend running HP's Print and Scan Doctor for Windows to search the driver and software to see if there are any issues.
Please respond to let me know if this helped or if you have any other questions!
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP 7510 AIO printer won't stay connected - Wired workstation, wireless printer

Hi! I spoke (and checked solution button) too soon. The printer still "disappears" from the Wired XP network workstation. The only difference since applying the solution given is that the disconnects are now happening about every 12 hours, vs every couple of hours.
Ink notification is set to "only when I print"
Static IP is set for all machines
HNDU works -- when the printer is visible but will hang the workstation if printer is not visible.
Original comments follow below;
HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-12-2012 03:59 PM
Printer: HP 7510
Network: multi-station wireless, thru DLink DI-632 (one PC hardwired to router)
Address Config:   Printer is using static IP -- outside of DCHP range (192.168.15.240)
Printer Config: Each computer has static IP set into the control panel app, using IP addressing.
Operating System: XP (Service Pack 3)
Other devices: Ipad, Xoom and Kindle Fire (all working using ePrint)
Network Security Protocol: WEP (we're out in the country)
Network Setup: Main router, along with 2 access ports (hardwired); currently using channels 1, 5 and 11 (again, we're in the country and have little competition for channels)
File Sharing: All machines in network have one open "share" drive, accessable with passwork.
Scenario: Wireless computers appear to stay connected for several days to a week at a time. (We reboot weekly, just as a SOP)
Computer that is wired to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to restore connection.
When this happens, other machines continue to print and scan, with no problems, and the wired machine continues to have its name displayed in the SCANNING panel on the printer -- but the printer won't talk to it.   All network functions, including internet and intranet access to the printer's EWS is still available. I have noticed that if I go into check ink levels, though, that the ink check software behaves differently.
Normally in the ink status app, there is a small "working" icon with 6 dots. When this computer is connected properly, it will start jumping around the circle, showing activitiy, get to 41%, and then display the ink status info. When the printer/computer connection is not working, the "working" icon will go to just a couple of percent then jump to the printer information page, showing make, model, serial number, firmware level etc.
In every instance so far, rebooting (with no other action) brings the printer/computer connection back to life -- until next time. I am trying to find any other pattern for this behavior, just can't identify it yet.
I started out with the plain vanilla installation, but then every computer in the network would consistently drop connections, about every 45 minutes. Using the info on this forum, I've eliminated the drop-outs for those printers, and got to the Static IP solutions (we've done that anyway for years with net-ready machines). This is the last machine that "drops off" It appears that some piece of HP-required software is "dropping out" or getting clobbered, but I cannot see a pattern, even checking and noting the various software used locally on the machine, and the various websites visited. So far, no pattern.
I am hoping that an HP guru with access to the source for the "ink supply" status software can take a look at what is happening and why it will always go to 41% and then display ink status (when connected) and then only go a couple of percent and display the ink status (when it isn't connected).
Thanks, in advance,
jim
Solved! Go to Solution.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 2 of 5 (65 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-13-2012 01:48 PM
More info:
In last paragraph, above, the request for "ink status" is returned with a static display of the printer firmware version, driver version, step level, MAC# etc of the printer, not "ink status" when the printer is disconnected.
Also, when printer is disconnected the HP home networking utility will hang the system -- a hard reboot is required, which restores the printer, until the next time it goes "into the woods". Signal stregth, measured on the printer, is 4 bars (very good).
Add Tag...
Quick Reply Reply
007OHMSS
Master's Graduate
Posts: 1,302
Registered: 08-12-2009
Message 3 of 5 (41 Views)
Report Inappropriate Content
1
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-20-2012 09:30 AM
Not sure if this would help, some of the info could be pertinent:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I am a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 4 of 5 (25 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 09:53 AM
Thanks! That appears to solve the problem. After your suggestion, I remembered that I set the "ink level warning" on this machine ONLY to "Always warn me", as opposed to "tell me only when I am printing". That seemed to be the problem. Only the computer that was set to "always warn on low ink-levels" was disconnecting -- the others worked fine! Now, all are working fine.
Just to be safe, though, I've also turned off the "scan from printer to computer" function on each computer. That was set for each machine, and seemed to work fine. The other machines in the network did not disconnect, and the printer was tracked whether each computer was on or off.   May try to turn it on later; I'll see if the family uses that feature very often!
Thank you for your help.
Jim
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 5 of 5 (17 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 03:56 PM
I spoke too soon! After about 26 hours, the printer connection on the one "hard-wired" CPU dropped, which is better than before, but still not solid. Same exact symptoms as before. Only piece of the puzzle that was different this time is about 50 pages were scanned, some to this computer. Used the "Scan requested from CPU" process, rather than enabling the "Scan TO Cpu" function in the software app. It did not drop the connection immediately after -- about 1 hour to 1.5 hours afterwards. Suspect this is a coincidence, not a cause of the problem with this machine.
I also scanned (same approach) from one other CPU on the network -- that wifi connection is still rock-solid.
Jim
Add Tag...
Quick Reply Reply
This question was solved.
View Solution.

I think it is fixed now.....the problem seems to reside in the module that will notify you immediately if ink is low (vs notify me only when printing). If, when initially installed, the user selects "immediately", then the printer will randomly disappear. (More on "re-finding it" later.)
Also, it is difficult to change the ink notification setting, because it appears not to be "sticky", but will sometimes, flip. (I've not figured this out yet). As long as the setting for "low ink notification" is on "only when printing", life is good.
If the printer does disappear, go over to the Advanced tab when the printer software/firmware page comes up, instead of the current ink levels. Reset the selection about "tell me about ink notification" to "only when printing", and then toggle the "autoshut off" from "NEVER" to "2 hours" and then, finally, back to "NEVER". Then, lastly, press closed on the panel. Printer should be connected again. To test, go to the Photosmart 7510 app again, and select "Show estimated ink levels". The counter will start at 1%, jump to 41% and then bounce around until it displays the ink level.
FOR HP TECH: Please consider making the "ink level notification" persistent in the registry OR provide a de-install tool that will completely clean all traces of the prior installation of the 7510 driver / app in the registry, so that a new install may have this setting saved correctly.
Hope this helps some of you -- it's an excellent printer once its running!
jim

HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.

Printer: HP 7510
Network: multi-station wireless, thru DLink DI-632 (one PC hardwired to router)
Address Config: Printer is using static IP -- outside of DCHP range (192.168.15.240)
Printer Config: Each computer has static IP set into the control panel app, using IP addressing.
Operating System: XP (Service Pack 3)
Other devices: Ipad, Xoom and Kindle Fire (all working using ePrint)
Network Security Protocol: WEP (we're out in the country)
Network Setup: Main router, along with 2 access ports (hardwired); currently using channels 1, 5 and 11 (again, we're in the country and have little competition for channels)
File Sharing: All machines in network have one open "share" drive, accessable with passwork.
Scenario: Wireless computers appear to stay connected for several days to a week at a time. (We reboot weekly, just as a SOP)
Computer that is wired to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to restore connection.
When this happens, other machines continue to print and scan, with no problems, and the wired machine continues to have its name displayed in the SCANNING panel on the printer -- but the printer won't talk to it. All network functions, including internet and intranet access to the printer's EWS is still available. I have noticed that if I go into check ink levels, though, that the ink check software behaves differently.
Normally in the ink status app, there is a small "working" icon with 6 dots. When this computer is connected properly, it will start jumping around the circle, showing activitiy, get to 41%, and then display the ink status info. When the printer/computer connection is not working, the "working" icon will go to just a couple of percent then jump to the printer information page, showing make, model, serial number, firmware level etc.
In every instance so far, rebooting (with no other action) brings the printer/computer connection back to life -- until next time. I am trying to find any other pattern for this behavior, just can't identify it yet.
I started out with the plain vanilla installation, but then every computer in the network would consistently drop connections, about every 45 minutes. Using the info on this forum, I've eliminated the drop-outs for those printers, and got to the Static IP solutions (we've done that anyway for years with net-ready machines). This is the last machine that "drops off" It appears that some piece of HP-required software is "dropping out" or getting clobbered, but I cannot see a pattern, even checking and noting the various software used locally on the machine, and the various websites visited. So far, no pattern.
I am hoping that an HP guru with access to the source for the "ink supply" status software can take a look at what is happening and why it will always go to 41% and then display ink status (when connected) and then only go a couple of percent and display the ink status (when it isn't connected).
Thanks, in advance,
jim
This question was solved.
View Solution.

Not sure if this would help, some of the info could be pertinent:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

A "HP Twain Scan" function in the "Print and Scan Doctor" app - Solution?

Frustration!! Why can't I get the scanning portion of subject printer to work on my laptop Windows 7 (64-bit)!?? I've tried the Print and Scan Doctor several times, and the same dysfunction says "HP Twain Scan" whatever that means or is? I've pulled out the cords, all of 'em, and it still not helping. Did I purchase a printer that is not compatible with my laptop? As far as the scanning portion is concerned, or what? I can print OK, both from website/emails and my own documents. I do a lot of scanning (photos mostly), and so this will be a sad problem.Hoping someone out there in techland can give me a solution. Thanks!

Hi , Welcome to the HP Forums! I understand that you cannot scan with your HP Envy 7645 on Windows 7. I am happy to look into this scanning issue for you! Some questions for you: Are you able to make copies with the printer? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series.How is the printer connected? Wireless, Ethernet, or USB? In the meantime, please try the steps within this scanning guide, A 'No Computer Found', 'Connection Required', or 'Scan Unsuccessful' Message Displays for HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One Printer Series, and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Scanning multiple pages from print book into computer

How to scan multiple pages from print book into computer? Someone supplied a link to this question, but I got stuck at step 1: Where is "HP Director software"? In other directions, it says to open the "HP Scan window," but that option is not available to me when I follow the directions. I have an HP 2159m computer, HP Photosmart Plus all-in-one, Windows 7, and use Firefox, if that's any help.
TIA

I have a similar problem:
I am using an HP Officejet 6310xi via its TWAIN interface. Regardless of which application invokes TWAIN (whether Irfanview, Thumbs Plus, or something else), the scanner dialog closes after transferring each scanned image. To scan the next page requires re-starting the scanner, beginning with a whole new preview and re-entering all my scan settings. This is only an issue with the HP scanner, not with my Cannon CanoScan LIDE 100, Visioneer OneTouch 8920, or any other scanner, each of whose scanner dialogs stay open for scan after scan. Can anyone help me make the HP scanner dialog stay open for multiple pages?
Note: Based on a suggestion on another site I set my scan preferences to include "Prompt for Additional Scans from Glass" as follows, but it did not help.
I am experienced at scanning, but I find it extremely frustrating that the HP scan dialog closes, forgetting its settings, after each page.
If it helps others, I gladly share my article, "Freedom from Paper--At Last" here
http://www.richpasco.org/paperless.html

How can I scan from my HP printer to e-mail on my Chromebook?

How can I scan from my HP printer to my Chromebook?

Hello ermingarde,
I understand you would like to scan from your HP Printer to your Chromebook. I would love to be able to help you with this, but require a little more information:
1. What is the exact model number of your Chromebook? Click the link to find out:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
I will watch for your reply.
Thanks in advance,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

PDF files scanned at B & W print to an HP 2055dn Postscript printer as white on black

PDF files scanned at B & W print to an HP 2055dn Postscript printer as white on black. Non postscript printers print the same file correctly. This is the case with three different scanners. Scanning the same sheets into greyscale prints fine with all printers.
HP claims it is not a problem with their printers. Someone from Fujitsu (makers of Scansnap) said to "
Verify that Advance Emit Transfer (print correction function for the Mac print table) is unchecked. Go to Print > Advanced Emit Transfer Function and click to uncheck. " but I can't seem to find anything like that at all.
I really prefer to scan in B & W, as I have to scan several hundred pages and the resulting file is both smaller and higher quality than the grayscale files, but I can't print them at home; I have to use the printer at work and that really isn't appropriate.

Hi,
Can you try some experiments please - or tell us if you have tried them.
1) Load a new image (one that hasn't been saved before) into the editor and without saving it, try printing from the editor. It is important that PSE hasn't saved it.
2) Load any image into the editor and do a Save for Web (you may have to reduce the size) in JPG format and see if you can print that JPG either from PSE or another program.
Please let us know the results.
Brian

Problem getting scan of pix from printer/scanner/fax machine

Long used P E to get pix scanned by printer/scanner/fax. Then I bought a slide scanner and installed, and PE brought in slides scanned by separate machine. Disconnected slide scanner. Now whenI try to get pix scanned by printer/scanner/fax, it says it "Can't find the slide scanner" and SHUTS DOWN. How can I reset PE to get the scanned pix from the printer/scanner/fax again. It has no trouble going to the printer/scanner/fax to print pix.
Cindi

Open Organizer and on the top menu click Edit à Preferences à Scanner
I tried the website and help searching for scan, I have had every PE since
2 and have 48,000 pix in my catalogue, so I'm pretty knowledgeable about
the program. I also searched under file. I usually go to Get photos and
thought it should give a choice under scanner there. Never thought to go to
Edit and Preferences.
In a message dated 3/14/2012 7:16:58 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Problem getting scan of pix from printer/scanner/fax machine
created by Brett N (http://forums.adobe.com/people/Brett+N) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4267751#4267751)

Where do documents that were scanned on a HP printer go???

scanned documents on HP printer... dont know where they went... where do I find them on my PC???

Hi,
Default location of scanned documents is My Documents > My Scans.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I can print from my Canon ir3080 to my MacBook Pro, but I cannot scan from the Canon printer to the MacBook. Suggestions?

I can print from my Canon ir3080 to my MacBook Pro, but I cannot scan from the Canon printer to the MacBook. Suggestions?

Contact Canon.

Scan scan bar on the printer is continuously moving back and forth.

The printer is connected via USB to a computer using Vista and also used remotely by a MAC, IPad, and IPhones.
The scan bar on the printer is continuously moving back and forth, I ran the HP Print Scan Doctor and it found no problem.
I can print, copy, and scan but the motion of this piece on the device will not stop.
No change to the issue occurred when I turned the printer off, waited several hours, and turned it back on.

Hi @GGx3,
Welcome to the HP Forums!
I noticed that the scan bar on your HP Officejet pro 6830 printer is continuously moving back and forth. I am happy to look into this scanning issue for you!
First, I would recommend a hard reset, by going to this post, How to perform a Hard Reset, by @Rich1. it is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Please, see this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would go through this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed, and watch this video:
(Even though the guide title may not match your issue, I believe the solutions will help.)
The last step I would do is to also make sure your printer's firmware is up-to-date. Getting Printer Updates for HP Officejet 6810 and Officejet Pro 6830 e-All-in-One Printer Series.
Hope this solves your problem, and have a good day!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

7510 e printer looses wifi connection after each print job;

7510 e printer looses the wifi connection after each print job; only switching wifi off and back on at the printer touch screen makes it reconnect. Tried more or less everything, including downloading updated software for the printer. Wifi router (unfortunately) is provided by internet provider. WPA2.

It sounds like the printer may have an unstable wireless connection.
What brand and model is the router?
Have you tried setting a static IP address? I recommend setting a static IP address as it can resolve a lot of networking issues with printers in general.
The steps to do this are located in step 6 of this document from HP.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How do you scan a document from printer to convert to PDF?

How do you scan a document from printer to convert to PDF?

Have the scanner connected to the computer.
Have the scanner software installed.
Check the scanner manufacturer's website for the most recent / updated drivers and install same.
Have Acrobat XI installed.
While Acrobat XI can make use of Windows WIA drivers Acrobat "likes" TWAIN drivers best.
So, if available, have the latest-greatest TWAIN.
Acrobat can communicate with the scanner via the scanner software.
An alternative --
Scan directly to TIFF. Then use Acrobat to create PDF from the TIFF.
Some scanners come with software to output to PDF directly; if present you could use that.
Be well...

How do you SAVE a scanned image from my printer?

I have an HP Deskjet 3510 Printer. How do I save a scanned image from my printer to a folder? This is my first MAC.

It's automatically saved, if you use the Image Capture application already pre-loaded on your computer you specify the folder, file name, and type of file (jpg, pdf, etc...) right there. You didn't say what scanning app you use but I'm sure it is very similar.
BTW because this is your first Mac I'd suggest book marking and using the Intel-based iMac Support link.

A3 scanning on 7510 WF printer

Similar Messages

Maybe you are looking for