AAA Radius-Persistent Line from Old Config?

Hello, I have implemented a new Radius server and have begun pointing my IOS-based devices at it. When I do the new configuration, I see that one line from the old config is still present:
radius-server source-ports 1645-1646
I can not 'no' this line, and can't change it to anything else
I am using 1812-13 for my ports, in this line:
radius-server host 10.10.5.1 auth-port 1812 acct-port 1813
My question is really just why is that line persistent? Does it require a reload of the device to remove it from the config? Has anyone else seen this? It does not appear to cause problems, but seems odd that when I 'no' the line, it never is removed.
Thanks!

Yes, sorry, this is a 3750 in this case (3560s involved seem to have the same thing): 12.2(25r)SEE4
Thanks!
Jake

Similar Messages

Configuring AAA New-Model brings back old config.

We are assuming responsibility for a set of network gear from a vendor that developed an app for us. They had all the gear authenticate against their radius server. My task today is to remove that config, and point to our ACS servers using tacacs. I thought this would be an easy copy and paste, but when I put in our standard aaa new-model config, it appears like their config involving radius parameters, comes back into play. I have ended up being unable to access these devices, getting 'Authorization Failed' after putting in my user credentials and password. Any suggestions on this would be a big help!

This has occurred on various platforms, but one example is the 2821 router with c2800nm-ipbasek9-mz.124-22.T1.bin.
Here is an example of what is happening:
Beginning Config:
testsw#sh run | inc radius
aaa authentication login default group radius enable
aaa authentication enable default group radius enable
aaa authorization exec default group radius none
aaa accounting exec default start-stop group radius
aaa accounting network default start-stop group radius
aaa accounting network system start-stop group radius
aaa accounting connection default start-stop group radius
aaa accounting system default start-stop group radius
ip radius source-interface Vlan99
radius-server host 10.57.132.21 auth-port 1812 acct-port 1813
radius-server source-ports 1645-1646
radius-server timeout 1
radius-server key 7 0716376F6B0A0A200F2A2F5420240E171A39170A3E03355352
When I issue 'no aaa new-model', the radius server configs disappear:
testsw(config)#no aaa new-model
testsw(config)#
testsw(config)#do sh run | inc radius
ip radius source-interface Vlan99
testsw(config)#
When I re-apply just the 'aaa new-model' command:
testsw(config)#do sh run | begin aaa new-model
aaa new-model
aaa authentication login default group radius enable
aaa authentication enable default group radius enable
aaa authorization exec default group radius none
aaa accounting send stop-record authentication failure
aaa accounting session-duration ntp-adjusted
aaa accounting exec default start-stop group radius
aaa accounting network default start-stop group radius
aaa accounting network system start-stop group radius
aaa accounting connection default start-stop group radius
aaa accounting system default start-stop group radius
aaa session-id common
testsw(config)#do sh run | inc radius
ip radius source-interface Vlan99
radius-server host 10.57.132.21 auth-port 1812 acct-port 1813
radius-server source-ports 1645-1646
radius-server timeout 1
radius-server key 7 0716376F6B0A0A200F2A2F5420240E171A39170A3E03355352
So, just putting back the aaa new-model command, by itself, brings back all the former aaa new-model commands, and the radius server commands. We run tacacs to a pair of ACS servers for all our other stuff, so maybe this behaviour is unique to radius...not really sure. Anyway, the process of changing has hosed up three devices requiring a reload, and one that I dorked up bad enough to have to rebuild the device config!

What's wrong? Verify and compare Cisco 2901 config after loading old config from Cisco 2801

Hi Cisco Community / Friends,
I am new to this site though I have cisco account for many years. I am a CCNA ,I passed my certification on January 2013 I seldom use and utilized my skills on networking becuase of my type of work. I am Project Eng'r working in a System integrator company . Anyway, I would like to ask assistance on the configurations of my Cisco router for this gov't projects.. Here's the situation.
We have a new project for the VSAT Comm'n of Coast Watch Station , The VSAT was installed 7 years ago. The VSAT was only used for a year by this Gov't agency because of subscription issue. Now, they wants to revive and use their VSAT facilities for the Coast watch monitoring. Now, some of this routers are working up to now and for some site are already defective so I need to replace the old 2801 router with a new equivalent model which is Cisco 2901. My plan was just to load the old config into the new Cisco 2901 router. However, after loading it to the new router, I am a little worried because I've got some errors received. I load the old config by copying the old files, edit it in notepad, and load the config using Secure CRT (terminal emulator). When I copy the old config of cisco 2801 to new router cisco 2901 , below are the command not recognized on Cisco 2901. What's wrong ? What are these commands for?
Appreciate your comments and help on this matter.. Thank You very much
Note: I Attached the original config from Cisco 2801 and the other file is the config after I load the config file to Cisco 2901.
(Errors see below)
CWS_4_Pandami(config-erm)#mmi polling-interval 60
                         ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi auto-configure
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi pvc
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#mmi snmp-timeout 180
                                                        ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-if)#interface GigabitEthernet0/1
CWS_4_Pandami(config-if)# description ===CWS4 SAT Modem===
CWS_4_Pandami(config-if)# bandwidth 256
CWS_4_Pandami(config-if)# ip address 192.168.42.1 255.255.255.0
CWS_4_Pandami(config-if)# duplex auto
CWS_4_Pandami(config-if)# speed auto
CWS_4_Pandami(config-if)# priority-group 1
                                                    ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config)#access-list 100 permit ip any any dscp cs5
CWS_4_Pandami(config)#priority-list 1 protocol ip high list 100
                          ^
% Invalid input detected at '^' marker.

Hi
From Cisco's website:
The Modem Management Interface (MMI) is software that enables auto-provisioning for the Cisco 827 routers. The MMI uses a fixed PVC to communicate with the Proxy Element (PE) residing on the digital subscriber line access multiplexer (DSLAM). Using MMI, the Cisco 827 router updates the running image and downloads the prescribed configuration using a configuration file or configuration values in a provisioning information database.
The customer premise equipment (CPE) can be automatically configured using the Cisco DSL CPE download, but it can be configured only with the image provisioning feature.
So because this is your device, you don't want to use MMI anyways.
And "priority-list" is QoS. Probably that QoS-command is old and removed, because now QoS is configured using class-maps and policy-maps.

Transfer old config files from old C150 to New C170

I exported the complete configuration from the old C150 and emailed it to myself without masked passwords. I copied the file to my machine and logged into the new C170. System Administration --> Configuration File
Selected Load Configuration file from local computer. I browsed to the file and seleted it and hit "load"
It failed on so many lines that just seemed incompatible with the new XML structure I just gave up. I ended up doing it manually but would like to know if it is possible to accomplish the original task of importing that old config file?

The dievices have different port settings and there are some large differences in the code. You cannot transfer the entire config file but you can do it in sections. Such as export your HAT config and import that to the C170.
How I did it was hook a laptop directly to the new C170 on the management port and opened a wireless connection via browser to the live C150 and manually set all of my network configurations individually.

User needs to delete a line item from old STO

Hi all,
User needs to delete a line item from old stock transfer order and would like to be advised what he needs to do to delete the line item from the STO.
On the STO, Goods Issue done and reversed also. Delivery completed indicator not checked. I aslo found that the payment has been made for the line item 40 for Freight. Carrier charges. It seems that the payment has been made/cleared to the vendor. I think Due to this reason they are unable to remove this line item from STO. They have attempted to delete or block an item that is not yet closed. All down (advance) payments made to date have been taken into account.
Can you please advice how to resolve this problem?
Thanks in advance..
Regards
Suresh

Hi,
Delivery completed tick is also there for STO PO. If you are not getting it then check settings. Also you can mark deletion indicator for that line item. Or minimise quantity to goods received quantity.
For STO if delivery is made from delivering plant but Goods receipt not done in receiving plant then that material remains in transit. Can viewed with ME5t. In this case that line item cannot be delted or delivery completed.
Still your client wants to complete these type also better to leave decision to business if they want to reverse delivery (Stock of issuing plant will increase) or make Gr ( Stock of receiving plant will increase) Although they can adjust later with physical inventry process and make stock in system to real physical stock
Regs,
Appie

"line over/under text" from old Quark doc - how to get rid of them?

"line over/under text" from old Quark doc - how to get rid of them?
Can´t seem to finde this and deadline is coming for this project..
Thanks!
G.

I actually found it by myself. But thanks for your response. Not having used my danish version of Quark for 5 years makes finding options i dont usually use in indesign kind of hard. I won´t ever miss danish quark.

What do IPSEC mean under Security - AAA - Radius - Authentication

I can't find exact information regarding the IPSec checkbox in Security -> AAA -> Radius -> Authentication.
On the Cisco Wireless LAN Controller Configuration Guide 5.1, it says "Check the IPSec check box to enable the IP security mechanism, or uncheck it to disable this feature.
The default value is unchecked."
What is exactly mean by IP security mechanism?
Does this mean that I can terminate VPN client over my WLC?
Take note that this options appeared even though no crypto card installed in my controller.

This is old code from the Airespace days. There used to be a VPN module that would ride in the WLC. No longer supported, well can't buy it new, but if you had one already...you get the idea.
HTH,
Steve

AAA RADIUS 3750x

Hello!
I am troubleshooting a new 3750x stack install - everything is wonderful save two issues, one being RADIUS. I have mirrored the config of another working stack identically but am having no love with my RADIUS. Debug radius auth showed this - any ideas?
I have tried a few things including specifying my management VLAN interface as the source for RADIUS but it did not have any effect.
I am running 15.0(2)SE on IPBASEK9-M
10:22:43: RADIUS: AAA Unsupported Attr: interface         [221] 4
10:22:43: RADIUS:   74 74                [ tt]
Thanks for your help

Hello - thank you for the replies and sorry for the delay
1 - Win 2k8R2 and the new client has been added to the server. I did not directly copy the config but build the new switch from scratch and just confirmed the settings match the other stack in prod.
Below is the relevant running config with some IPs scrubbed
version 15.0
no service pad
service timestamps debug uptime
service timestamps log datetime msec localtime
service password-encryption
hostname 3750
boot-start-marker
boot-end-marker
enable secret 4 AzOv8DBnWTvZk7TujZRsOLtF2TgDG0tElrIlbSOtolk
enable password 7 080F435C1D1C0947425C4D
username citjmf1 privilege 15 secret 4 5ou3p2/fFuAg1bx5ec2m4Okz4syLs3u2iDSkhU/Oe4.
username citjnc1 privilege 15 secret 4 LD86/rbfwBjQ5CiTYnoGnAH/v4ToI7qHtKnVuw31gUs
aaa new-model
aaa group server radius group1
server 10.10.220.130 auth-port 182 acct-port 1813
aaa authentication login default group group1 local
aaa session-id common
clock timezone EST -5 0
clock summer-time EDT recurring
switch 1 provision ws-c3750x-48
switch 2 provision ws-c3750x-48
system mtu routing 1500
ip domain-name
ip name-server
ip name-server
vtp domain
vtp mode transparent
udld aggressive
spanning-tree mode rapid-pvst
spanning-tree loopguard default
spanning-tree extend system-id
port-channel load-balance src-dst-ip
interface Vlan555
description Management
ip address x.x.x.x 255.255.255.0
ip default-gateway
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 x.x.x.x
logging history informational
radius-server host x.x.x.x auth-port 1812 acct-port 1813
radius-server key 7 13201A02021E010A7A767B
end
Below is the output of debug radius and debug aaa authen
I have confirmed the config is correct on the RADIUS server and I see no reason for this to not work.
Log Buffer (4096 bytes):
2d21h: AAA/BIND(0000008E): Bind i/f
2d21h: AAA/AUTHEN/LOGIN (0000008E): Pick method list 'default'
2d21h: RADIUS/ENCODE(0000008E): ask "Password: "
2d21h: RADIUS/ENCODE(0000008E): send packet; GET_PASSWORD
2d21h: RADIUS/ENCODE(0000008E):Orig. component type = Exec
2d21h: RADIUS: AAA Unsupported Attr: interface         [221] 4
2d21h: RADIUS:   74 74                [ tt]
2d21h: RADIUS/ENCODE(0000008E): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
2d21h: RADIUS(0000008E): Config NAS IP: 0.0.0.0
2d21h: RADIUS(0000008E): Config NAS IPv6: ::
2d21h: RADIUS/ENCODE(0000008E): acct_session_id: 132
2d21h: RADIUS(0000008E): sending
2d21h: RADIUS/DECODE: No response from radius-server; parse response; FAIL
2d21h: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
2d21h: AAA/AUTHEN/LOGIN (0000008E): Pick method list 'default'
2d21h: RADIUS/ENCODE(0000008E): ask "Password: "
2d21h: RADIUS/ENCODE(0000008E): send packet; GET_PASSWORD
2d21h: RADIUS/ENCODE(0000008E):Orig. component type = Exec
2d21h: RADIUS: AAA Unsupported Attr: interface         [221] 4
2d21h: RADIUS:   74 74                [ tt]
2d21h: RADIUS/ENCODE(0000008E): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
2d21h: RADIUS(0000008E): Config NAS IP: 0.0.0.0
2d21h: RADIUS(0000008E): Config NAS IPv6: ::
2d21h: RADIUS/ENCODE(0000008E): acct_session_id: 132
2d21h: RADIUS(0000008E): sending
2d21h: RADIUS/DECODE: No response from radius-server; parse response; FAIL
2d21h: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
2d21h: AAA: parse name=tty1 idb type=-1 tty=-1
2d21h: AAA: name=tty1 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=1 channel=0
2d21h: AAA/MEMORY: create_user (0x3E3C4D0) user='citjnc1' ruser='NULL' ds0=0 port='tty1' rem_addr='10.10.10.122' authen_type=ASCII service=ENABLE priv=15 initial_task_id='0', vrf= (id=0)
2d21h: AAA/AUTHEN/START (4180928019): port='tty1' list='' action=LOGIN service=ENABLE
2d21h: AAA/AUTHEN/START (4180928019): console enable - default to enable password (if any)
2d21h: AAA/AUTHEN/START (4180928019): Method=ENABLE
2d21h: AAA/AUTHEN (4180928019): status = GETPASS
2d21h: AAA/AUTHEN/CONT (4180928019): continue_login (user='(undef)')
2d21h: AAA/AUTHEN (4180928019): status = GETPASS
2d21h: AAA/AUTHEN/CONT (4180928019): Method=ENABLE
2d21h: AAA/AUTHEN(4180928019): password incorrect
2d21h: AAA/AUTHEN (4180928019): status = FAIL
2d21h: AAA/MEMORY: free_user (0x3E3C4D0) user='NULL' ruser='NULL' port='tty1' rem_addr='10.10.10.122' authen_type=ASCII service=ENABLE priv=15 vrf= (id=0)
2d21h: AAA: parse name=tty1 idb type=-1 tty=-1
2d21h: AAA: name=tty1 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=1 channel=0
2d21h: AAA/MEMORY: create_user (0x7AF0A24) user='citjnc1' ruser='NULL' ds0=0 port='tty1' rem_addr='10.10.10.122' authen_type=ASCII service=ENABLE priv=15 initial_task_id='0', vrf= (id=0)
2d21h: AAA/AUTHEN/START (3135930977): port='tty1' list='' action=LOGIN service=ENABLE
2d21h: AAA/AUTHEN/START (3135930977): console enable - default to enable password (if any)
2d21h: AAA/AUTHEN/START (3135930977): Method=ENABLE
2d21h: AAA/AUTHEN (3135930977): status = GETPASS
2d21h: AAA/AUTHEN/CONT (3135930977): continue_login (user='(undef)')
2d21h: AAA/AUTHEN (3135930977): status = GETPASS
2d21h: AAA/AUTHEN/CONT (3135930977): Method=ENABLE
2d21h: AAA/AUTHEN (3135930977): status = PASS
2d21h: AAA/MEMORY: free_user (0x7AF0A24) user='NULL' ruser='NULL' port='tty1' rem_addr='10.10.10.122' authen_type=ASCII service=ENABLE priv=15 vrf= (id=0)
I see I am not getting a response from my Radius server

How do I use an old config file in cluster ?

Hi,
I have an asa cluster, and saved the config on disk0 once a week.
Now I would like to replay the config from last week, but it doesn ?t work.
I thought when I configure the boot config statement pointing to the old config on disk0 it should work. but ist doesn ?t. The Secondary takes over, and then the Primary comes back, but with the old config.
How does is work ?

Disconnect the command switch from the member switches and physically remove it from the cluster. Insert the member switch in place of the failed command switch, and duplicate its connections to the cluster members. Start a CLI session on the new command switch.

How to select LAST line from a SAP table?

Hi developers,
I need to select the last line from a SAP table, NOT from an internal table.
Something like
SELECT SINGLE LAST FROM pa00169..
any help is more than welcome.

Javier,
Based on this statement from you:
"i created a Z table, its a config table that stores some bussines rules, and an id counter, so in order to update that counter i need the last line of the ztable."
I have one additional solution which is the "text box" approach IF the 'id counter' mentioned above is a numeric data type.
If so, use an SQL function to get the highest value of ID_COUNTER.
Then simply add one to it to produce a new, unique, higher-order primary key.
See below:
data: l_id_counter like ztable-id_counter.
data: new_id_counter like ztable-id_counter.
select max( ID_COUNTER ) from ztable into l_id_counter.
new_id_counter = l_i_counter + 1.
Now new_id_counter will be the unique, primary key IF this is the only field in ZTABLE's primary key.
This will also GUARANTEE that your new record is built correctly.

Copying itunes music from old to new Windows PC

Hi,
I currently have iTunes installed on my laptop, the iTunes config files are in the default directory on the C:\ however the actual music files and folders are on an external USB drive.
I have just purchased a new Dell Inspiron 6400 and want to transfer my iTunes onto this new laptop. I assume I have to install iTunes onto the new laptop but after that I have no idea.
1. What are the steps to copy over my iTunes from old to new laptop?
2. Will it keep the playlist and folder structure on the new laptop that is already setup on old laptop?
Cheers Col.
Dell Laptop Windows 2000 iTunes 6.0.4.2

If you download a program called ephPod you will be able to copy all the songs from your iPod to a folder of your choice on your new computer. Its free as well, which is always good.
once downloaded, connect your ipod to your new computer and ephPod will load up all the songs on it. if you click on songs at the top (as in, sort by songs), then select all and copy to directory it will ask u to select a folder on the computer to copy the songs to. then just simply press ok and it shold work. any photos can be copied by going into your iPod via My Computer and just clicking on iPod -> Photos. good luck!

ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75

ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
Scenario:
I am having difficulty getting ODBC connection between Oracle OWB app with an 11gR2 DB (running on a VirtualBox Linux) and SQL Server 2008 running directly on the host. (Windows 8)
I am trying to take a SQL Server 2008 feed into Oracle Ware house Builder, and think(!) I have read everything and configured it in accordance (but I presume not given 3 days of failed attempts to fix it). I have also read several blogs, hence there might be a few more settings in the configuration files than the formal documentation says, but these have come from blogs that have “Solved” problems for other similar situations.
The environments:
HOST:
Name: RESOLVEIT-PC
IP: 192.168.1.80
Windows 8 (64bit) , with system DSN ODBC connection ACME_POS created with 32 bit ODBC set up (This setting still shows up fine in the 64 bit ODBC).
GUEST VM:
Name: OraDBSvr.com
GUES fixed IP Address: 192.1.200
Oracle VirtualBox (4.2.16)
Oracle Redhat Linux 6 (x86)
Oracle 11gR2 Enterprise Edition (11.2.0.1.0)
ODBC: Freetds driver
Configuration files:
initacmepos.ora
HS_FDS_CONNECT_INFO = 192.168.1.80/SQLEXPRESS/ACME_POS
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SUPPORT_STATISTICS=FALSE
HS_RPC_FETCH_REBLOCKING= OFF
HS_FDS_FETCH_ROWS = 1
HS_FDS_SHAREABLE_NAME = /usr/local/lib/libtdsodbc.so
set ODBCINI=/opt/odbc/odbc.ini
# set <envvar>=<value>
odbc.ini
[ACME_POS]
Driver     = FreeTDS
Description = ODBC Connection via FreeTDS
Trace       = 1
Servername = 192.168.1.80
Database    = dbo
odbcinst.ini
[PostgreSQL]
Description                        = ODBC for PostgreSQL
Driver                   = /usr/lib/psqlodbc.so
Setup                    = /usr/lib/libodbcpsqlS.so
Driver64                              = /usr/lib64/psqlodbc.so
Setup64                              = /usr/lib64/libodbcpsqlS.so
FileUsage                           = 1
[MySQL]
Description                        = ODBC for MySQL
Driver                   = /usr/lib/libmyodbc5.so
Setup                    = /usr/lib/libodbcmyS.so
Driver64                              = /usr/lib64/libmyodbc5.so
Setup64                              = /usr/lib64/libodbcmyS.so
FileUsage                           = 1
[FreeTDS]
Discription             = TDS driver (Sybase / MS SQL)
Driver                           = /usr/local/lib/libtdsodbc.so
# Setup                         = /usr/local/lib/libtdsS.so
FileUsage                           = 1
CPTimeout               =
CPReuse                 =
[oracle@oraDBsvr etc]$
freetds.conf
#   $Id: freetds.conf,v 1.12 2007-12-25 06:02:36 jklowden Exp $
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
# For information about the layout of this file and its settings,
# see the freetds.conf manpage "man freetds.conf".
# Global settings are overridden by those in a database
# server specific section
[global]
        # TDS protocol version
;              tds version = 4.2
               # Whether to write a TDSDUMP file for diagnostic purposes
               # (setting this to /tmp is insecure on a multi-user system)
;              dump file = /tmp/freetds.log
;              debug flags = 0xffff
               # Command and connection timeouts
;              timeout = 10
;              connect timeout = 10
               # If you get out-of-memory errors, it may mean that your client
               # is trying to allocate a huge buffer for a TEXT field.
               # Try setting 'text size' to a more reasonable limit
               text size = 64512
# A typical Sybase server
[egServer50]
               host = symachine.domain.com
               port = 5000
               tds version = 5.0
# A typical Microsoft server
[ACME_POS]
host = 192.168.1.80
port = 60801                                # also tried 1433
instance = SQLEXPRESS
tds version = 8.0
client charset = UTF-8
tsql -LH 192.168.1.80
     ServerName RESOLVEIT-PC
   InstanceName SQLEXPRESS
    IsClustered No
        Version 10.50.4000.0
            tcp 60801
             np \\RESOLVEIT-PC\pipe\MSSQL$SQLEXPRESS\sql\query
            via RESOLVEIT-PC,0:1433
Oracle listener:
[oracle@oraDBsvr log]$ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = acmepos)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = dg4odbc)
(HS = OK)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oraDBsvr)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@oraDBsvr log]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 16-SEP-2013 13:57:41
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oraDBsvr)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                16-SEP-2013 13:50:34
Uptime                    0 days 0 hr. 7 min. 7 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oraDBsvr/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraDBsvr)(PORT=1521)))
Services Summary...
Service "acmepos" has 1 instance(s).
Instance "acmepos", status UNKNOWN, has 1 handler(s) for this service...
Service "dw" has 1 instance(s).
Instance "dw", status READY, has 1 handler(s) for this service...
Service "dwXDB" has 1 instance(s).
Instance "dw", status READY, has 1 handler(s) for this service...
The command completed successfully
Oracle tnsnames.ora
[oracle@oraDBsvr admin]$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
dw =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dw)
acmepos =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
(CONNECT_DATA=(SID=acmepos)
(HS=OK)
Oracle sqlnet.ora
[oracle@oraDBsvr admin]$ cat sqlnet.ora
# sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
ADR_BASE = /u01/app/oracle
I can connect from the linux server to SQL Server, and query the database:
[oracle@oraDBsvr etc]$ tsql -S acme_pos -U acme_dw_user -P acme1234
locale is "en_US.utf8"
locale charset is "UTF-8"
using default charset "UTF-8"
1> select last_name from dbo.employees;
2> go
last_name
Davolio
Fuller
Leverling
Peacock
Buchanan
Suyama
King
Callahan
Dodsworth
(9 rows affected)
1>
However, I can’t get a response through Oracle OWB , and I get:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
In the hs log file I get:
[oracle@oraDBsvr log]$ cat acmepos_agt_3821.trc
Oracle Corporation --- MONDAY    SEP 16 2013 13:51:22.170
Heterogeneous Agent Release
11.2.0.1.0
HS Gateway: NULL connection context at exit
[oracle@oraDBsvr log]$
I am really stuck now and going round in circles and can’t see the wood for trees! Can anyone please help?!!
Many Thanks.
Rafe.

Let us rewrite your ODBC DSN a little bit... Your current odbc.ini looks like:
[ACME_POS]
Driver     = FreeTDS
Description = ODBC Connection via FreeTDS
Trace       = 1
Servername = 192.168.1.80
Database    = dbo
Let us change it a little bit so that we only need one config file - no odbcinst.ini nor freetds.conf file anymore:
[ACME_POS]
Driver =/usr/local/lib/libtdsodbc.so
Server = 192.168.1.80
Database
= dbo     #### I have some doubts that you have a SQL Server database called dbo - one database that always exists is master - so as a test use master here or get the real database name of the SQL Server database you want to connect
Port = 60801 ## make sure it really is the correct port - best would be to check on the SQL server and then try telnet <ip> <port> if you can connect to the SQL server
TDS_Version = 8.0
QuotedId=YES
Especially the last 2 parameters are mandatory. TDS_Version specifies the TDS Version you have to use to connect to the SQL Server and QuotedID is required for DG4ODBC as it surrounds objevt names by double quotes.
What happens now when you try to connect with for example isql - the ODBC test utility shipped with the ODBC Driver manager?
In addition, could you please do me another favour and check the word size of DG4ODBC and the ODBC Driver Manager as well as the ODBC Driver - just execute:
file /u01/app/oracle/product/11.2.0/dbhome_1/bin/dg4odbc
file /usr/local/lib/libtdsodbc.so
file < the patch to your libodbc.so library>/libodbc.so
and post the output.

How can I read "Keys" from a Config File that have square brackets in them?

I'm using the "Read Key (String).vi" from the config.llb and I'm having a problem because the key names in my file have square brackets in them. I'm creating an VI to read certain pieces of the TestStand �StationGlobals.ini� file and array elements appear as %[0] = "blah blah blah". It looks like they're not getting recognized at all. Is there a way to handle this?

I was just looking at the code inside the configuration VIs and the way they work under V6 is that the Open VI actually reads the contents of the configuration file, parses it (in nice-platform independent G) and stores it in a fancy LV2-style global called the "Config Data Registry.vi". The routine that does the parsing is called "String to Config Data.vi". My gut reaction is that this code is going to be the same in your version because between sometime prior to V6 of LV, NI changed the location of a couple terminals on the low-level Match String function and it looks like when this code was originally written the terminals were in the old configuration.
In any case, if your square-bracket containing strings are getting lost, this is probib
ly where it's happening at. The other place to check is in the read VI itself. The V6 VI for reading the configuration registry is called "Config Data Get Key Value.vi". It's output is then further parsed by a function called "Parse Store String.vi" if the "read raw string?" input is set to False (the default position).
Given that all the code for these functions are written in LV, you should be able to fix your VIs to read the strings you have in the ini file now. Which IMHO is actually the way they should work.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Import contacts from old outlook 2013 to new Outlook 2013

I recently had to get a new computer. I removed the boot drive from the old computer and installed it as drive F on the new computer. This worked great in recovering my large data files. However, drive F contains an instance of Outlook 2013
as does drive C. How do I copy to or import drive F's contact info to the new Outlook 2013 contacts? I do not need the old email messages as I already have gotten them from the email service provider.

Hi
As per the information and details provided by you, to import contacts from old Outlook 2013 to the new Outlook 2013 please follow these steps: -
Collect Files from the Old Computer
First, you need the PST from your old computer. In most cases, they will be in the default location Outlook uses. To quickly access the default PST location outside of
Outlook, paste this line in Windows Explorer’s address bar:
%USERPROFILE%\Local Settings\Application Data\Microsoft\Outlook
Copy the Files to the New Computer
Now, you will copy the PSTs to the new computer. If you have several PSTs in the folder and are not sure which one is the one with your data, look at the file dates and
file sizes. If you have 265KB PST files, they are empty and don’t need to be moved.
Paste the following line into the address bar.
%USERPROFILE%\Application Data\Microsoft\Outlook
In this folder you will have the NK2, SRS, XML, outlprnt, and VBA project files.
Open the AppData Roaming folder using the following command and copy the NK2 file to the folder.
%APPDATA%\Microsoft\Outlook
Create a Profile
After the PST file is on the local drive, type mail in the start search field on the
Start menu or go to Control Panel, Mail then opens the profile dialog. (If you use the
Category view, mail is under the Users group; in Win 64-bit, Mail is under 32-bit application.
Click the Show Profile button.
Click Add to create a new profile.
Enter a descriptive name for your profile.
Enter the name you want to use for your display name, your email address, and your password.
Add Your Existing Data File (PST) to the Profile
If you have an Outlook data file PST, and you want to use with your new profile, then please follow these steps: -
Select the newly created profile, then click Properties.
Click Data files button to open Account Setting dialog to the Data files tab.
Click Add then browse to your existing PST file.
If the PST is a native Outlook 2003/2007 file type, choose the top entry for the Outlook Personal File. Click Ok.
Select your existing PST file.
You can enter a friendly name or just click OK to return the Account Settings dialog.
Click the Sets as Default button. Select the PST Outlook created when it created the profile and click Remove. If you want, click Open folder to find and deletes this PST.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Have 2004 eMac...screen goes black without notice. Getting a reconditioned 2005 eMac. Can I have the HD swapped from old eMac to reconditioned one without problems??? Black screen is called "collapse to black" and occurs 4-5 daily

Have 2004 eMac...screen goes black without notice. Black screen is called "collapse to black" and occurs 4-5 daily. From what I understand, this is due to bad capicators????? Found a reconditioned 2005 eMac on line. Can I have the HD swapped from old eMac to reconditioned eMac without problems???...with regards to software applications. Old eMac is running 10.4.11 and reconditioned on runs 10.5. Suggestions, tips would be greatly appreciated. Thank you.

Might want to make sure both units are not affected. This is the range of serial number from the now-defunct Apple Repair Extention Program for USB 2.0 eMacs:
G8412xxxxxx- G8520xxxxxx
YM412xxxxxx - YM520xxxxxx
VM440xxxxxx - VM516xxxxxx
A "collapse" is more indicative of a video cabling issue, but the bad caps produced such a wide range of problems that it's hard to sort through them.
If the old eMac is a USB 2.0, which a 2004 unit should be, the HD should exchange with the new one. As the last of the eMacs shipped with Tiger, the new computer should have no probelms with a 10.4 boot volume on the old drive. You can upgrade to Leopard one you have hte new disk in place.
NOTE: Takeapart and reassembly on the USB 2.0 must be done "just so" or you can permanently damage the power switch. Instructions for the USB 1.1 takeapart are slightly different , and the power swtich damage is usually caused by people using the older instructions on a newer eMac.
If you are not up to the takepart nor can you find a local computer tech who knows these. consider taking the drive out of the dead computer(won't make much difference if you damage that one as it's dead), buy an external Firewire enclosure, and put the old drive on it and use it to move data to the new computer. Then you can leave the external attached as a backup drive.
Is the new one a 1.42Ghz model? They have been practically trouble-free around here. We have one and it's been rock solid since we bought it as a refurb in Jan 2006. The 1.42G has the advantage of a Core Image-enabled video chipset, the ATI 9600.
And all USB 2.0 eMacs can, with modern memory modules, support up to 2G of RAM.

AAA Radius-Persistent Line from Old Config?

Similar Messages

Maybe you are looking for