ABAP API' s Problems
Hi All,
I am trying to retrieve data from MDM using ABAP API's .
I am stuck with couple of scenarios:
1.How can we pass Boolean field to retrieve the data from MDM?
2. I need pass a date value ....the last updated date should be greater than last job run date ...based on this query i need to retrieve data from MDM...
please let me know your ideas ....
Hi,
1.How can we pass Boolean field to retrieve the data from MDM?
For retrieving Boolean field you can use Retrieving Simple Types
CALL METHOD lr_api->mo_core_service->retrieve
EXPORTING
iv_object_type_code = 'Products' // Main Table
it_result_set_definition = lt_result_set_definition
it_keys = lt_keys
IMPORTING
et_result_set = lt_result_set.
If you are using MDM 7.1 Please refer this for more details: You need Service Market Place ID for this.
https://websmp210.sap-ag.de/~sapidb/011000358700001887232008E
https://websmp210.sap-ag.de/~sapidb/011000358700001718602008E
if you are using MDM 5.5 Please refer this for more details:
https://websmp210.sap-ag.de/~sapidb/011000358700000271912007E Refer HOWTO_8
2. I need pass a date value ....the last updated date should be greater than last job run date ...based on this query i need to retrieve data from MDM...
I am not quite sure how it can be done because here we don't have any Suppress unchanged records option as we have in syndicator which take care of syndicating only new and changed records to your target system everytime. Here we have just methods and classes which will retrieve all the records.
You can invoke validation in MDM 7.1 using ABAP APIs but question is how will you make sure that this validation run on the basis of change pointers i mean for records which have already retrieved from MDM using MDM ABAP APIs. you can print record id for failed validations.
Best Regards,
Mandeep Saini
Similar Messages
-
Hi folks,
I am working with the MDM ABAP API and there are some errors that do not make any sense to me.
Here is a list with the technical information:
MDM 5.5 SP 5 (5.5.40.83)
SAP NetWeaver 2004s (700)
MDM API 555/700
I have set up the Repository information in MDMAPIC, using a new created provider of the type CL_MDM_PROVIDER_55_SP05_PL00 ( MDM5.5 SP05 Patch 0, Server Build 5.5.40.79 - 5.5.40.xx ).
I then have tried to establish the connection to the server and repository and so on according to the HowTo Guides.
When I finished yesterday, I managed to connect to my local MDM Server and to retrieve the names of the mounted repositories, but I was not able to retrieve records from a certain repository. When I wanted to solve that problem today, I was not able to connect to my MDM server anymore. There have been no changes in the coding or the configuration since then, only the MDM server has been restarted and the repository has been reloaded. But apart from that, nothing has changed but still I am not able to establish the connection anymore ( Connection refused ). Then I have tried to connect to another MDM server, but there I get another error ( Connection is not trusted ), although I have rechecked a dozen times that there is the allow.ip with the proper ID of my SAP system and the according user in the MDM repository.
From time to time, the errors change without changing anything else, just by trying to execute it a couple of times. I have figured out, that sometimes I get an error out of the above mentioned provider class ( CL_MDM_PROVIDER_55_SP05_PL00 ). Is it possible, that the MDM API is not working properly with the PL00?
Hints are appreciated a lot...!
Thanks and best regards,
SabineHi,
Check whether the server is down or not. If the server is down, u will get the same error message
regards,
Nikhil -
MDM ABAP API Performance Problems
Hi all,
we developed a custom transaction into our ECC 6.0 system to remotely retreive data coming from MDM (7.1 SP05) and show them to the user. The 2 systems phisically reside in different datacenters, so running in the same WAN but in 2 different AD domains and 2 different ip networks.
In short the transaction is working using the standard MDM ABAP API functionalities and getting the MDM data using the following methods:
CALL METHOD lr_api->mo_accessor->connect
CALL METHOD lr_api->mo_core_service->query
CALL METHOD lr_api->mo_core_service->retrieve
CALL METHOD lr_api->mo_accessor->disconnect.
This is working, but with awful performances. for example to get a subset of materials (around 500 codes) it takes more than 1 minute, and the quantity of data transfered from MDM to ECC (around 30 KB) is not justifying this time.
Please be so kind to suggest any kind of activity that I can perform to improve the situation.
Thanks in advance.I am trying to retreieve date from MDM to ECC using ABAP API.I am getting the below dump.
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_MDM_PROVIDER' was raised, but it was not
along
the call hierarchy.
Since exceptions represent error situations and this error
adequately responded to, the running ABAP program
'CL_MDM_PROVIDER_71_SP00_PL00==CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can loo
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_MDM_PROVIDER', was not caught in
procedure "GET_LOC_SUPP" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Internal error: field 'SEARCH_GROUPS' not found; contact your system
administrator
Please check at this point I am getting dump:
LT_SEARCH_TUPLE_PATH
Table IT_1806[0x12]
\CLASS=CL_MDM_PROVIDER_71_SP00_PL00\METHOD=IF_MDM_CORE_SERVICES~QUERY\DATA=LT_SEARCH_TUPLE_PAT
Table reference: 1612
TABH+ 0(20) = 000000000000000007000000579D710000000000
TABH+ 20(20) = 0000064C0000070E000000000000000CFFFFFFFF
TABH+ 40(16) = 04000138000F44A0000424E403000000
store = 0x0000000000000000
ext1 = 0x07000000579D7100
shmId = 0 (0x00000000)
id = 1612 (0x0000064C)
label = 1806 (0x0000070E)
fill = 0 (0x00000000)
leng = 12 (0x0000000C)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000300
occu = 4 (0x00000004)
accKind = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniNo)
keyKind = 1 (default)
cmpMode = 12 (ILLEGAL)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
LV_MESS
field 'SEARCH_GROUPS' not found
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
6666622544544545455522667266766222222222222222222222222222222222222222222222222222222222222222
695C407351238F72F50370EF406F5E4000000000000000000000000000000000000000000000000000000000000000
SY-REPID
I am picking the data from MAIN TABLE MDM_SUPPLIER_MAP and below is the code.
CALL METHOD lv_mdm_api->mo_core_service->query
EXPORTING
*Main Table
iv_object_type_code = 'MDM_SUPPLIER_MAP' "#EC NOTEXT
* it_query = lt_query
IMPORTING
et_result_set = lt_result_set.
Please suggest solution to get the records from MDM to ECC.
When I am tring to replace the abpove with the below code it is working.But in this case I need to retreive all the data instead of using DO and ENDO.Could any please suggest solution.
DO 10 TIMES.
APPEND sy-index TO keys.
ENDDO.
CALL METHOD lv_mdm_api->mo_core_service->retrieve_simple
EXPORTING
iv_object_type_code = 'MDM_SUPPLIER_MAP'
it_keys = keys
IMPORTING
et_ddic_structure = result_ddic -
Hi,
I am on the way of integrating ABAP API in PI 7.1 EHP 1 with MDM 7.1
I installed MDM ABAP API in PI system.
In transaction MDMAPIC, created MDM Server Connection with default port, DBMS Hosts and MDM Repository.
After I did the above tasks, I tested the RFC Connection, But its failed with the following error.
Connection Test MDM_API_GEN_DEFIANCEDEP
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details ERROR: program DEFIANCEDEP.MDS not registered
Error Details LOCATION: SAP-Gateway on host DEFIANCEDPI / sapgw00
Error Details DETAIL: TP DEFIANCEDEP.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 87
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1714
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 711
Error Details TIME: Sat Mar 12 13:53:55 2011
Error Details VERSION: 2
Appreciated if replied with the proper resolution at the earliest.
Thanks in Advance
Pradeep ShettyHi Kanstantsin Chernichenka,
Thanks for your reply.
I tried the given suggestion. And even restarted the PI and MDM system.
Still, I am facing the same problem.
My allow.ip file contains
122.183.187.24;
122.183.187.25;
115.242.211.112;
115.184.2.47;
My MDS.ini file contents are
[MDM Server]
XCS Ini Version=1
Accelerator Dir=E:\usr\sap\MDM\MDS02\mdm\accelerators
Log Dir=E:\usr\sap\MDM\MDS02\log
Report Dir=E:\usr\sap\MDM\MDS02\mdm\reports
Archive Dir=E:\usr\sap\MDM\MDS02\mdm\archives
Distribution Root Dir=E:\usr\sap\MDM\MDS02\mdm\distributions
Transport Dir=E:\usr\sap\MDM\MDS02\mdm\transport
Modifications Dir=E:\usr\sap\MDM\MDS02\mdm\modifications
Lexicon Dir=E:\usr\sap\MDM\MDS02\exe\Lexicons\
Extra DBConnection Validation=True
Log SQL Errors=True
String Resource Dir=E:\usr\sap\MDM\MDS02\exe\LangStrings\
Stemmer Install Dir=E:\usr\sap\MDM\MDS02\exe
Wily Instrumentation=False
Wily Instrumentation Level Threshold=10
SLD Registration=True
Skip Unchanged Records=False
Autostart=0
MDS Ini Version=1
RELEASE\UseAssert=True
Tracing Level=3
LogViewer Format Logging=False
LogViewer Format Tracing=False
Trusted SAP Systems=DPI
TrustFiles Dir=E:\usr\sap\MDM\MDS02\config
Max Threads Per Operation=Auto
Lock Account After Failed Password Attempts=5
Lock Account Duration=1800
Minimal Password Length=5
Password Expiration Days=90
Password Expiration Warning=7
Disable Read Access To Corrupt Repositories=False
MDS Scone=
Log SQL Modifications=False
Maximum DBMS Bind Count=512
Oracle\Dll=OCI.DLL
Allow Console to Retrieve Files=True
Oracle Tablespace Files=1
Default Interface Language Code=eng
Default Interface Country Code=US
Client Ping Timeout Minutes=0
Inactive Client Timeout Minutes=30
Value Retrieval Threshold=0
Protect Family Nodes With Locked Data=False
Number Of Stemmers Per Language=2
TrexDllPath=
Import Slice Size=2048
Bulk Import Silo=True
Safe Silo Mode=False
Enable Change Stamp Logging=False
Always Verify DBMS Connection Before Executing SQL Statements=False
Disable Read Access To Repositories That Require Restart=False
Family Retrieval Threshold=30000
Enable Client Dictionaries=False
Restricted Url For Client Export=
Index_Page_Margin=10
Default Slice Size=500
Default Slice Wait Time MS=300
Enable Slicing For Non-Bulk Operations=False
Multithreaded Matching=True
SAP RFC Gateways=
[MDM Server\Databases\MDM_1MDMORCL_5_3_4_3]
Port=2345
Login=SYSTEM
Password+=ES066H2NVHDCFSJ206LJ9I995SLBVSA21OMQPM0
Stemmer Language=
Stemmer Variant=
Valid Keyword Chars=abcdefghijklmnopqrstuvwxyz0123456789
Max Large Text Length=250000
Number of Rows Per Fetch=100
Max Initial MB to Retain=4
Max Send Failure MB to Retain=4
Workflow Detailed Report=False
Mail Server=
Mail SMTP Timeout=1
Here I am requesting you to send your valuable feedback at the earliest.
Thanks
Pradeep Shetty -
ABAP API to store DATE value in MDM 5.5
Hello All,
Currently I am working on MDM 5.5 and need to have some suggestions on ABAP API Function module to store date values in MDM.
We have interface from where we take the user input which updates the field value back in the MDM.
On the basis of similar scenario we have "DATE" field on the interface which will update the date and time in MDM, also we are making use of ABAP API for development.
The problem is that data type mismatch is happening between MDM and ABAP API,please let me know which ABAP API Function module should we use which simply accepts the DATE and TIME for every single record.
Source code provided will be much more appreciable.
Regards,
SwapnilHi Swapnil.
In the same link provided by Sudhanshu, can you navigate to the node "Retrieving Complex Types".
It has sample codes and MDM interfaces for TimeStamp, Time Stamp, User Stamp, Literal Date, Literal Time etc.
As suggested, you can also try to use the type MDM_CDT_DATE_TIME.
See the sample code provided in the link as below:
Type: MDM Literal date:
CLEAR lv_date.
CONVERT TIME STAMP ls_result_ddic_ex-fieldliteraldate-content TIME ZONE sy-zonlo INTO DATE lv_date.
WRITE: AT (10) lv_date, '|'.
Type: MDM Literal time:
CLEAR lv_time.
CONVERT TIME STAMP ls_result_ddic_ex-fieldliteraltime-content TIME ZONE sy-zonlo INTO TIME lv_time.
WRITE: AT (10) lv_time, '|'.
Regards
Bala -
MDM ABAP API - Language information not valid for repository
Dear all,
We're programming an interface in SAP R/3 to MDM catalog through 'MDM ABAP API's'. Automatically, it creates an RFC connection to MMD, but we're getting the following connection errorwhen executing the API:
E MDM_ABAP_API 078 Language information ENG US USA not valid for MDM repository XXXYYYZZZ*.
*where XXXYYYZZZ is the repository name.
W'e've established the connection in R/3 through transaction MDMAPIC and we've created the same user in R/3 and MDM Console.
This is the code written on the program where we are defining the language (ENG), country (US) and region (USA).
*maintain logon language information
ls_repository_language-language = 'ENG'.
ls_repository_language-country = 'US'.
**no region information needed here
ls_repository_language-region = 'USA'.
How can I see the repository language definition?
Which are the correct codes to be used for language 'English', Country 'United States' and Region 'USA'? And for other countries, like spanish language, country Spain and Region ¿spain?
In fact, we copied this code from website:
http://help.sap.com/saphelp_nwmdm71/helpdata/en/44/93ad8931381053e10000000a422035/frameset.htm
Maybe the problem is that any RFC configuration is missing, and it has to be done in transaction SM59?
Thanks for your feecback,
Carlos Santamaría.The problem is now solved.
The correct languague information codes for Language Spanish, Country Spain and Region, are as follows:
Language: 'spa'
Country: 'ES'
Region: '___'
It is important to respect the CAPS, otherwise it doesn't work.
Regards,
Carlos Santamaría. -
ABAP API for XML Validate(by schema)
Hi
Encountering this problem, find out ABAP XSLT Processor API to transform a xml file, need to validate it against predefined schema, but have not find out proper ABAP API to take this validate task. Could anybody once meet such kind of problem? will be much appreciated gettting your reply!I think I will just do the work in Java Webdynpro and use the KM API. It is a pity because I would much rather do it in ABAP Webdynpro, it just seems like nobody has really done it or documented it well...
Thanks anyway
Lynton -
Use KM ABAP API without XI/PI
Hello KMC Gurus,
I try to use the <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db356ceb-0701-0010-ff8f-af07e78588a0">ABAP API for Knowledge Management and Collaboration</a> from a WebAS ABAP 7.00 (NW2004s). But I'm facing the problem that we don't have XI or now called PI installed. As I've read in OSS Note "883948 - NW 7.0(2004s): Inst.Add.Java Usage Types/Software Units" the Usage Type PI can't be installed afterwards. Is there a possibility to use the KM ABAP API also without XI/PI in place?
Best regards
GregorHi Gregor,
The articel you mentioned above is a preview to the next major release which is not yet available. Unfortunately in NW2004s there is no ABAP API available. But beginning with NW04s, SPS13 there will be at least WebServices available for KM functionailty. You can use them to generate your own Web Service Proxy in ABAP to connect to KM.
best regards,
Martin -
Hi All,
I am trying to make use of ABAP API from my R/3 system.
but I am not able to see the transaction MDMAPIC and many MDM related interfaces.
what could be the exact problem?
Any Service pack need to be added on normal R/3?
My R/3 system version is 4.7 with kernel patch NW2004 (640) dw patch 139 as per the How to guide.
Even I tried with R/3 5.0 with the same kernel patch.
I had maintained allow.ip at MDM server.
waiting for the replyHello,
using the MDM ABAP API requires SAP BASIS 6.40/7.00 and the right Kernel Patch level.
The API is not yet in SAP BASIS. That means it has to be downloaded from service marketplace and installed to the SAP System. After that the configuration will be there and the API is accessible.
Hope that helps.
Best regards,
Daniel -
ABAP API's - URGENT- Tracking of changes in MDM.
Hello Experts,
I want to track all the changes made in MDM In ECC. I know that i can do it using ABAP API's tracking feature.
I have already established the connection between ECC and MDM.
I would want to know all the exact steps to enable tracking and monitoring through ABAP API's.
Helpful answers will be highly appreciated.
Thanks and Regards
Nitin jain
Edited by: Nitin Jain on Jan 29, 2008 4:45 AMHi Nitin,
As you have already connected to MDM through R/3.
For Changing Tracking, you have to call the function 'MDM_ADMIN_RETR_CHANGE_TRACKING' for that you have to use structure MDM_AUDIT_INFORMATION.
I am not quite sure will it work. Please try.
Hope it helps you,
Regarding CCMS montoring in MDM ABAP APIs, refer the link:
How TO Guides available on Service Market Place.
https://websmp210.sap-ag.de/~sapidb/011000358700004121872006E --> operations
Here apart from How to guides you will also get
HowTo_CCMS_Trace.pdf : It will guide you if there any errors come in connection b/w R/3 and MDM. it does the following:
. Collect and evaluate application log data
- Collect and evaluate kernel trace data
- Problem solution showcasecomes
if your HowTo_07.pdf on Tracing report is working fine then you can identify whether is there any error coming or not.
Lets take an example : if you Shut down the MDM Server.
Then in R/3 On running HowTO_07 program:you will get ERROR DURING CONNECT: 3 , ERROR DURING DISCONNECT: 3
The Reason for this is the unavailable server. but here you will not get more details. For this
After implementing HowTo_CCMS_Trace guide: under transaction RZ20 : In Application Trace you will see error Partner not reached (hostXXX, Service 20005) and
In Kernel WorkProcess Trace: You will get error: MDE Kernel Error, NiRaw2ConnectError: the attempt to establish a socket connect caused an error.
So in this way you evaluate the error in more details.
Note: For this you should have authroize to use the transaction RZ20 in R/3 System.
Hope it helps you,
Mandeep Saini. -
Mdm abap api retrieve method does not work properly
Lets say i have
in a qualified flat lookup several qualifiers.
i try to get the table using the following code:
loop at wa_contract_data-CONT_REMINDER into ls_qual_link.
wa_keys_reminder = ls_qual_link-QUALIFIED_link_ID.
append wa_keys_reminder to lt_keys_reminder.
CALL METHOD g_mdm_api->mo_core_service->retrieve_simple
EXPORTING
iv_object_type_code = 'TBL_REM'
it_keys = lt_keys_reminder
IMPORTING
et_ddic_structure = lt_remainder_data.
endloop.
finally lt_remainder_data contains only the non qualifier, but not the maintained data of the qualifiers.
what confuses me is that some fields are even not transfered at all.
does anyone know how to get what i would expect: the actual data of all other fields?
Thanks.
GideonHi Gideon,
I have used ABAP API's to successfully retrieve the data from the MDM into a DDIC structure in ECC side using the program Retrive Simple.
I had followed the webinar by Klaus David. Here is the link for the same:
ABAP API for SAP NetWeaver Master Data Management - Webinar Replay
PPT:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601ddb01-e5c8-2910-d981-b190b51fca44
Webinar Replay
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00dd47bd-f2f1-2910-5eab-e9ca52465ae4
These links will take you through the configs, Sample source code for Retrieving data etc using both Retrive Simple & Retrive.
May be there is a problem with the DDIC that you have designed. ( the data types etc.)
Here are some additional links:
Master Data Management ABAP API Overview:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/00c49ffb-e5e5-2910-73ba-c85af1da5b0a
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/tip%2b%2bMDM%2bABAP-API%2b%2bThings%2bto%2bRemember%2b(for%2bStarters)
Kindly go through the links to figure out the problem.
Hope it helps.
Thanks and Regards
Nitin Jain -
MDM_TECH 554_700 ABAP API giving socket connection error
Hi,
I have recently installed the MDM_TECH 554_700 on a 64Bit R/3 system and configured the ABAP API thru customization for a 32Bit MDM Server. Currently I am facing a problem with 'NiRaw2ConnectError: Connection refused' error and when I checked the detailed log it shows that "ERROR => mdeKernelError, NiRawToConnectError: The attempt to establish a socket connection caused an error (rc=-10) [mdm_mdeClien 265]". I have checked the necessary kernel files ( dw_mdm.dll) to make the socket connection between the MDM system, the OSS note 965209 & 950245 and not able to trace the problem. Is it possible to make the connection between 64Bit R/3 and 32Bit MDM server? Help on this issue is highly appreciated.
Regards,
VeluAlejandro,
The MDM ABAP API & MDM Server Versions are same. Both of them are in SP04. Here is the details on the versions:
MDM ABAP API - MDM SP04 provider, Server build 5.5.32.48 - 5.5.32.x
MDM Server 5.5 - SP04 ( 5.5.32.65)
Regards,
Velu -
MDM ABAP API - Retrieval of Qualified Flat lookup fields
Hi,
I am having trouble retrieving the records using MDM ABAP API when the fields that are being retrieved includes a Qualified Flat lookup field. An exception is being thrown with the error message <b>Value with type id 0 is not supported</b>. I don't see any problem when I am trying to retrieve other fields of types String or Real. The type of the Qualified Flat lookup field is set to MDM_QUALIFIED_LINK_TABLE as per the How to guides given by SAP. Any ideas on why the exception is occuring?
Thanks
SumanHi Suman,
Please check if the How to guide (#13) in SMP -operations is of help https://websmp204.sap-ag.de/nw04operation
Regards,
Anita -
Trigger MDM Workflow Using MDM ABAP API
Hi ,
I have requriment to trigger MDM Workflow from ABAP , Please suggest how to do it ?'
Thanks in Advance.
Shyam.Hi,
Are you creating material in MDM using Data Manager or Portal. or Using ABAP API.
If your workflow trigger Action is "Record Create" then it should trigger workflow as soon as new material is created. I don't see any problem in this.
Regards,
Shiv -
Hi All,
After creating Repository on MDM Server Using MDM ABAP APIs, when i call MDM_Accessor_connnect function module to connect the Repository i am geeting Error: Server Return Code 0XFFAA0201 :User not found. Even i have created same Identical user name with Password who has logged onto the R/3 System as suggested in HowTo_02.pdf
Assure Points will be awarded if problem solves.
Am i missing any settings please suggest.
Regards,
MandyHi Mandy,
Give the user name which is same as R/3 system in Capital letter. Dont give any password .
Regards,
Nikhil
Maybe you are looking for
-
Hi there I wonder if someone could answer me this, I am new to Sage line 50 sotfware and one of my customers had over paid on an invoice by £19.80. A cheque was raised to the customer and posted out to them. The problem is allocating this cheque to
-
Flash using arrow keys to move between frames in an animation
Hi, Im currently creating a calculator on flash and I would like to be able to move to the next part of the calculator (the next frame) by using the arrow keys on my keyboard This is my current code to move between the frames using a buttons. stop();
-
Problem with masterdata delta update
Hi, Iam facing problem with 0material (masterdata) delta problem i.e. I have already uploaded all the transaction and master data of a infocube. To day when Iam checking all the others working properly but only 0material master data (attrbutes and
-
Hi I use a DTO/VO with variable 'credit' as Number type. When I initialise with a blank VO with model.selectedItem = new DataVO(); all my textinputs are empty as expected except for the 'credit' textinput which shows 'NaN' How do I prevent it from di
-
Can no longer use PS due to licensing issue. Told to see my IT people! I'm a single user and I AM IT! What to do? Thanks.