Abap code sample..please
Hello friends,
need some help.
i have created the datasource which si based on infoset. i would like to go for the structre which will be based on program. my structure is based on pa0001 and most of the fields are from the same table.
could you please tell me how should i write a code as i not good in coding. please provide me sample code as well...
my extract structure name is ztest . it will be a nice help for me
regards
Akshay,
I thaught Generic DS with Function Module..Please guide me if i'm wrong...
you have one infoset(It is also some thing like table... won't contain data physically)... from which you want to extract data...?
no need of any code... you after creating the DS save that one. Goto RSA3, check the contents for that DS.
Replicate DS in BW. Build the Data flow in BW.
all the best.
Regards,
Nagesh Ganisetti.
Similar Messages
-
SQL Command conversion in abap code
Hi,
I want to implement the UNION, INTERSECT and MINUS SQL commands in abap code. Please give me the appropriate solutions asap.
For Example:
select field1, field2, . field_n
from tables
<b>UNION</b>
select field1, field2, . field_n
from tables;
select field1, field2, . field_n
from tables
<b>MINUS</b>
select field1, field2, . field_n
from tables;
select field1, field2, . field_n
from tables
<b>INTERSECT</b>
select field1, field2, . field_n
from tables;
Thanks,
RaviHi Ravi
Check out this procedure...
DATA: FRANKFURT(4) TYPE X,
FRISCO(4) TYPE X,
INTERSECT(4) TYPE X,
UNION(4) TYPE X,
BIT TYPE I.
DATA: CARRID TYPE SPFLI-CARRID,
CARRIER LIKE SORTED TABLE OF CARRID
WITH UNIQUE KEY TABLE LINE.
DATA WA TYPE SPFLI.
SELECT CARRID FROM SCARR INTO TABLE CARRIER.
SELECT CARRID CITYFROM FROM SPFLI
INTO CORRESPONDING FIELDS OF WA.
WRITE: / WA-CARRID, WA-CITYFROM.
READ TABLE CARRIER FROM WA-CARRID TRANSPORTING NO FIELDS.
CASE WA-CITYFROM.
WHEN 'FRANKFURT'.
SET BIT SY-TABIX OF FRANKFURT.
WHEN 'SAN FRANCISCO'.
SET BIT SY-TABIX OF FRISCO.
ENDCASE.
ENDSELECT.
INTERSECT = FRANKFURT BIT-AND FRISCO.
UNION = FRANKFURT BIT-OR FRISCO.
SKIP.
WRITE 'Airlines flying from Frankfurt and San Francisco:'.
DO 32 TIMES.
GET BIT SY-INDEX OF INTERSECT INTO BIT.
IF BIT = 1.
READ TABLE CARRIER INDEX SY-INDEX INTO CARRID.
WRITE CARRID.
ENDIF.
ENDDO.
SKIP.
WRITE 'Airlines flying from Frankfurt or San Francisco:'.
DO 32 TIMES.
GET BIT SY-INDEX OF UNION INTO BIT.
IF BIT = 1.
READ TABLE CARRIER INDEX SY-INDEX INTO CARRID.
WRITE CARRID.
ENDIF.
ENDDO.
This produces the following output list:
The program uses four hexadecimal fields with length 4 - FRANKFURT, FRISCO, INTERSECT, and UNION. Each of these fields can represent a set of up to 32 elements. The basic set is the set of all airlines from database table SCARR. Each bit of the corresponding bit sequences representes one airline. To provide an index, the external index table CARRIER is created and filled with the airline codes from table SCARR. It is then possible to identify an airline using the internal index of table CARRIER.
In the SELECT loop for database table SPFLI, the corresponding bit for the airline is set either in the FRANKFURT field or the FRISCO field, depending on the departure city. The line number SY-TABIX is determined using a READ statement in which no fields are transported.
The intersection and union of FRANKFURT and FRISCO are constructed using the bit operations BIT-AND and BIT-OR.
The bits in INTERSECT and UNION are read one by one and evaluated in two DO loops. For each position in the fields with the value 1, a READ statement retrieves the airline code from the table CARRIER.
Comparing Bit Sequences
Use the following three operators to compare the bit sequence of the first operand with that of the second:
<operator>
Meaning
O
bits are one
Z
bits are zero
M
bits are mixed
The second operand must have type X. The comparison takes place over the length of the second operand. The first operand is not converted to type X.
The function of the operators is as follows:
O (bits are one)
The logical expression
<f> O <hex>
is true if the bit positions that are 1 in <hex>, are also 1 in <f>. In terms of set operations with bit sequences, this comparison is the same as finding out whether the set represented by <hex> is a subset of that represented by <f>.
Z (bits are zero)
The logical expression
<f> Z <hex>
is true if the bit positions that are 1 in <hex>, are 0 in <f>.
M (bits are mixed)
The logical expression
<f> M <hex>
is true if from the bit positions that are 1 in <hex>, at least one is 1 and one is 0 in <f>.
Caution: The following programs are no longer supported in Unicode systems:
REPORT demo_log_expr_bits .
DATA: text(1) TYPE c VALUE 'C',
hex(1) TYPE x,
i TYPE i.
hex = 0.
DO 256 TIMES.
i = hex.
IF text O hex.
WRITE: / hex, i.
ENDIF.
hex = hex + 1.
ENDDO.
The output is as follows:
00 0
01 1
02 2
03 3
40 64
41 65
42 66
43 67
Here, the bit structure of the character 'C' is compared to all hexadecimal numbers HEX between '00' and 'FF' (255 in the decimal system), using the operator O. The decimal value of HEX is determined by using the automatic type conversion during the assignment of HEX to I. If the comparison is true, the hexadecimal number and its decimal value are displayed on the screen. The following table shows the bit sequences of the numbers:
Thanks
Ashok -
Hey SAP Gurus,
We have around 30 systems on AIX which need to monitored remotely via TELNET service.
Is there a way where in a TELNET session can be called from an ABAP code.
Please let me know .
Regards,
Ashish .A. Poojaryhi,
telnet is nothing but connecting the system using the FTP command..
first know the port number to ..and use the below command in abap program to connect FTP.
FTP_CONNECT - Open a connection (and log in) to an FTP server
FTP_COMMAND - Execute a command on the FTP server
FTP_DISCONNECT - Close the connection (and log off) the FTP server
regards,
Prabhudas -
How to find currently editing transaction code details using ABAP code
Hi,
if some user is using VA02 tcode.i want to know for which sales order(i.e Sales order number)he is making changes.
i want ABAP code sample for this scenario.
Cheers,
JagHi,
For this you need to create Lock Object from se11 .It will automatically crate Two Function modules for enque and deque.
In you case If you want to see the Details for Va02 use.
CALL FUNCTION 'ENQUEUE_EVVBAKE'
EXPORTING
VBELN = VBELN
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2.
CASE SY-SUBRC.
WHEN 1.
MESSAGE E042(V1) WITH vbeln RAISING ERROR_IN_COPY.
ENDCASE.
Regds, -
BPC Master Data Deletion through ABAP code
Hi All,
I have a requirement of deleting the orphan nodes for one of the dimension in BPC using ABAP code.
Please let me know any standard program or classes for deleting the master data from dimension.
Regards
Pratibha BiradarHi Pratibha,
Here is the code to add master data, you can change the flag to 'D' to delete, i have not checked it for delete, it is working for adding.
DATA: ls_message TYPE uj0_s_message,
lt_messages TYPE uj0_t_message,
l_success TYPE uj_flg,
l_appset_id TYPE uj_appset_id,
l_dimension_id TYPE uj_dim_name,
lo_member_mgr TYPE REF TO if_uja_member_manager,
lo_dimension TYPE REF TO if_uja_dimension_manager,
lo_master_data_store TYPE REF TO if_ujam_master_data_store,
lo_context TYPE REF TO if_uj_context,
ls_dimension TYPE uja_s_dimension,
lt_errors TYPE uja_t_members_error,
lr_members TYPE REF TO data,
lr_data TYPE REF TO data.
FIELD-SYMBOLS:
<lt_member_data> TYPE STANDARD TABLE,
<ls_member_data> TYPE any,
<lv_field> TYPE any.
TRY.
lo_context = cl_uj_context=>get_cur_context( ).
cl_uj_context=>set_cur_context(
i_appset_id = l_appset_id
i_module_name = lo_context->d_calling_module
is_user = lo_context->ds_user
lo_dimension = cl_uja_bpc_admin_factory=>get_dimension_manager(
i_appset_id = l_appset_id
i_dimension_id = l_dimension_id
lo_dimension->get(
EXPORTING
if_with_hier_maxlevel = abap_false
IMPORTING
es_dimension = ls_dimension
CREATE OBJECT lo_master_data_store TYPE cl_ujam_master_data_store.
* creating masterdata table
lr_members = lo_master_data_store->get_table_buffer( ls_dimension ).
ASSIGN lr_members->* TO <lt_member_data>.
* Add members to <LT_MEMBER_DATA>, these are the member that will be saved.
CREATE DATA lr_data LIKE LINE OF <lt_member_data>.
ASSIGN lr_data->* TO <ls_member_data>.
* Fill each field, such as ID, and EVDESCRIPTION, update other fields here as well as
* any properties that need to be updated.
ASSIGN COMPONENT 'ID' OF STRUCTURE <ls_member_data> TO <lv_field>.
IF sy-subrc = 0.
<lv_field> = 'ProductD'.
ENDIF.
ASSIGN COMPONENT 'MBR_NAME' OF STRUCTURE <ls_member_data> TO <lv_field>.
IF sy-subrc = 0.
<lv_field> = 'ProductD'.
ENDIF.
ASSIGN COMPONENT 'EVDESCRIPTION' OF STRUCTURE <ls_member_data> TO <lv_field>.
IF sy-subrc = 0.
<lv_field> = 'Product D Update'.
ENDIF.
ASSIGN COMPONENT 'PARENTH1' OF STRUCTURE <ls_member_data> TO <lv_field>.
IF sy-subrc = 0.
<lv_field> = 'TotalProduct'.
ENDIF.
ASSIGN COMPONENT 'OBJVERS' OF STRUCTURE <ls_member_data> TO <lv_field>.
IF sy-subrc = 0.
<lv_field> = 'A'. "Version flag, should be "A" for Active
ENDIF.
ASSIGN COMPONENT 'ROWFLAG' OF STRUCTURE <ls_member_data> TO <lv_field>.
IF sy-subrc = 0.
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""Here you can change it to 'D' for Deleting """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
<lv_field> = 'I'. " This is an action flag, I=Insert, M=Modify """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
ENDIF.
APPEND <ls_member_data> TO <lt_member_data>. " Add to the table.
* Create member manager
lo_member_mgr = cl_uja_bpc_admin_factory=>get_member_manager(
i_appset_id = l_appset_id
i_dimension_id = l_dimension_id ).
* Save the members UNCOMMENT ONLY when you want to write the data!!!!!
* lo_member_mgr->save(
* EXPORTING
* ir_members = lr_members " List of members to save
* IMPORTING
* et_errors = lt_errors
* NOW PROCESS THE DIMENSION
DATA: ls_dimensions TYPE uja_s_dim_name,
lt_dimensions TYPE uja_t_dim_name.
CLEAR ls_dimensions. REFRESH lt_dimensions.
ls_dimensions-dimension = l_dimension_id. " Add dimensions to the list
APPEND ls_dimensions TO lt_dimensions.
lo_member_mgr->process(
EXPORTING
it_dim_list = lt_dimensions
if_set_offline = abap_false
if_validate = abap_true
IMPORTING
ef_success = l_success
et_message_lines = lt_messages ).
CATCH cx_uj_no_auth .
ENDTRY.
hope this will help,
thanks,
Rishi -
Needs sample ABAP code for field routine
Dear Expert,
There is a field "Pay Scale Group" in my DSO which stores the data in the format
AA1/B1/CCC2/DD2/EEE1, A1/BB2/CC2/DDD3/EE2 etc. These data has to be transferred to
InfoCube where "pay Scale Group" in the InfoCube will store the data like EEE1,EE2 etc.
I need to write a field routine on the transformation between DSO and Cube.
Can any one please help me with the sample ABAP code for this scenario.
Some more examples for better understanding of the requirement:-
Data in DSO(Source) Data in Cube(Target)
=================== ===================
AA1/B1/CCC2/DD2/EEE1 EEE1
AAA1/BB2/CC1/DDD3/EE2 EE2
A2/BBB2/CC2/DDD3/EEE5 EEE5
AA2/BB1/C1/DDD3/EE3 EE3
A3/B1/CC2/DDD1/EE4 EE4
Many thanks in advance.
Regards,
Prakash
Please do not dump your code requirements in SDN
Edited by: Pravender on May 18, 2011 11:37 AMHi,
You can use the following code :
Suppose the technical name of the field coming from DSO is ZPAY_SGRP.
And also for example let me take one record, that is ZPAY_SGRP = AA1/B1/CCC2/DD2/EEE1 .
My assumption is that there will always be 4 '/'.
In the field routine write the below code
data: V1(5) type c,
V2(5) type c,
V3(5) type c,
V4(5) type c,
V5(5) type c.
data : VAR1 TYPE /BIC/OIZPAY_SGRP.
split VAR 1 at '/' into V1 V2 V3 V4 V5.
result = V5.
V5 will be having the characters after the last '/' .That is V5 = EEE1.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 17, 2011 3:53 PM
Edited by: Ashutosh Singh on May 17, 2011 4:17 PM -
Sample ABAP code for userexits, and calling bapi's
Hi,
Can someone please send me sample ABAP code
1) to do extractor enhancement using user exit.
2) ABAP program to call BAPI to read live cache order series data in SNP and write to Idocs through some ports.
3) ABAP routine to generate file name (based on date/country)in the infopackage to upload flatfiles.
Thank you very much in advance and appreciate any help.
Regards
Prasadhai ,
check this code...
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
Enhancing 0FI_GL_4 - ABAP code is NOT working - URGENT PLEASE ???
Hi all,
I want to enhance 0FI_GL_4 extractor with CHECT, RWBTR & PRIDT from PAYR table if VBELN of 0FI_GL_4 is not BLANK, with the following conditions:
1.Load all the records of PAYRQ table into PAYRQ internal table LT_PAYRQ
with matching BELNR, AUGBL & BUKRS from I_DTFIGL_4 internal table.
2.Load all the records of PAYR table into PAYR internal table LT_PAYR
with matching AUGBL & BUKRS from LT_PAYRQ internal table.
3.Read PAYR internal table LT_PAYR with matching BELNR (from I_DTFIGL_4
internal table) and fill the new fields CHECT, RWBTR & PRIDT.
The following the is ABAP code, but it is NOT working:
DATA:I_DTFIGL_4 LIKE DTFIGL_4 OCCURS 0 WITH HEADER LINE,
L_TABIX LIKE SY-TABIX.
DATA: BEGIN OF LS_PAYRQ,
ZBUKR LIKE PAYRQ-ZBUKR,
BELNR LIKE PAYRQ-BELNR,
AUGBL LIKE PAYRQ-AUGBL,
END OF LS_PAYRQ.
DATA: LT_PAYRQ LIKE LS_PAYRQ OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF LS_PAYR,
VBLNR LIKE PAYR-VBLNR,
CHECT LIKE PAYR-CHECT,
RWBTR LIKE PAYR-RWBTR,
PRIDT LIKE PAYR-PRIDT,
END OF LS_PAYR.
DATA: LT_PAYR LIKE LS_PAYR OCCURS 0 WITH HEADER LINE.
WHEN '0FI_GL_4'.
I_DTFIGL_4 = C_T_DATA.
SELECT BELNR AUGBL ZBUKR
FROM PAYRQ
INTO CORRESPONDING FIELDS OF TABLE LT_PAYRQ
FOR ALL ENTRIES IN I_DTFIGL_4
WHERE BELNR = I_DTFIGL_4-BELNR
AND AUGBL = I_DTFIGL_4-AUGBL
AND BUKRS = I_DTFIGL_4-BUKRS.
SORT LT_PAYRQ BY BELNR.
SELECT VBLNR CHECT RWBTR PRIDT
FROM PAYR
INTO CORRESPONDING FIELDS OF TABLE LT_PAYR
FOR ALL ENTRIES IN LT_PAYRQ WHERE VBLNR = LT_PAYRQ-AUGBL
AND ZBUKR = LT_PAYRQ-ZBUKR.
SORT LT_PAYR BY VBLNR.
LOOP AT C_T_DATA INTO I_DTFIGL_4.
L_TABIX = SY-TABIX.
IF NOT I_DTFIGL_4-VBELN IS INITIAL. " IF BILLING DOCUMENT EXISTS
READ TABLE LT_PAYR WITH KEY VBLNR = I_DTFIGL_4-BELNR.
IF SY-SUBRC = 0.
MOVE LT_PAYR-CHECT TO I_DTFIGL_4-ZZCHECT.
MOVE LT_PAYR-RWBTR TO I_DTFIGL_4-ZZRWBTR.
MOVE LT_PAYR-PRIDT TO I_DTFIGL_4-ZZPRIDT.
MODIFY C_T_DATA FROM I_DTFIGL_4 INDEX L_TABIX.
ENDIF.
CLEAR:I_DTFIGL_4-ZZCHECT,I_DTFIGL_4-ZZRWBTR,I_DTFIGL_4-ZZPRIDT,
LT_PAYR, LT_PAYRQ.
ENDIF.
ENDLOOP.
Could you please find the problem with above ABAP code and correct it.
Since I want to enhance it, if VBELN is not Blank and do I have to move the IF condition (I_DTFIGL_4-VBELN IS INITIAL) to another location for better performance.
Thanks,
Venkat..Dear Gajesh,
Please accept my thanks for your Spontaneous reply.
Selection Screen data is given below.
1 --> Material Number
2 --> Inspection Lot Number
3 --> Date of Lot Creation
4--> Inspection Type
Normally the clint will give the Inspection Type ie 4th input and Date of Lot creation ie 3rd Input (Range of Date).
Please do the needful.
With Best Regards,
Raghu Sharma -
Any sample ABAP code to send Lotus Notes email to a list of people?
Any sample ABAP code to send Lotus Notes email to a list of people?
We will give you reward points!hi..
This sample code help you to send mail from SAP .
REPORT ZSSO_DOCUMENT_SEND_API1.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Creating the document to be sent
DOC_CHNG-OBJ_NAME = 'OFFER'.
DOC_CHNG-OBJ_DESCR = 'Auction of a Picasso jr'.
OBJTXT = 'Reserve price : $250000'.
APPEND OBJTXT.
OBJTXT = 'A reproduction of the painting to be auctioned'.
APPEND OBJTXT.
OBJTXT = 'is enclosed as an attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creating the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
OBJBIN = ' \O/ '. APPEND OBJBIN.
OBJBIN = ' | '. APPEND OBJBIN.
OBJBIN = ' / \ '. APPEND OBJBIN.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'picasso.bmp'. APPEND OBJHEAD.
Creating the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'BMP'.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Reproduction object 138'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK..
Entering names in the distribution list
RECLIST-RECEIVER = '[email protected]'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
RECLIST-RECEIVER = 'DLI-NEUREICH'.
RECLIST-REC_TYPE = 'P'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
CASE SY-SUBRC.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT RECLIST.
WRITE: / RECLIST-RECEIVER(48), ':'.
IF RECLIST-RETRN_CODE = 0.
WRITE 'sent successfully'.
ELSE.
WRITE 'not sent'.
ENDIF.
ENDLOOP.
WHEN 1.
WRITE: / 'no authorization to send to the specified number of' 'recipients!'.
WHEN 2.
WRITE: / 'document could not be sent to any of the recipients!'.
WHEN 4.
WRITE: / 'no authorization to send !'.
WHEN OTHERS.
WRITE: / 'error occurred during sending !'.
ENDCASE.
Go for SCOT transaction to send those mails.
REGARDS,
VEERESH -
Code sample for rtp server. please!
hi
I need to get a rtp server code, may it simple, in order to learn from it. Did not find anything from browsing. could anyone send me a sample or a link?
thanx a lotHi,
thanks for the link. I have aleready checked that, i should have specified more..
The thing is that these examples require that we have the client IP and port . But in case of a NATed client, I don t see how to get this client IP.
I looked in JMF API desperately for getting client info. But the only thing I get is the Participant class. No IP address nor a port to work with.
'Anyone has a clue, or a code sample of a small server that listen for clients and retrieve dynamically their IP/port? would help a Lot
thanx -
How to Use CMOD and SMOD in SAP using ABAP Code
Hello anyone,
Please help me How to use CMOD and SMOD in SAP using ABAP code.
Give Me Some Sample Example.
Mail ID: [email protected]
Thanks,
Regards,
S.Muthu,
SAP Developer.Hi,
User Exits.
http://www.erpgenie.com/sap/abap/code/abap26.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
customer exits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Menu Exit.
http://www.sappoint.com/abap/spmp.pdf
http://www.sappoint.com/abap/userexit.pdf
http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html -
Hello Friends,
Hope you all are well and doing good at your places
Friends, could you please suggest me how should I go for ABAP learning. How much ABAP knowledge is required while working as BW consultant?
I am working as BW consultant from last 1.5 year but not having any ABAP knowledge, so could you please send me some documents which will be useful while working as BW and it will be related with ABAP .
It would be great if any one can send me documents with code sample which genrally used in BW ( like, function module, infoset program, transfer routine, start rotine, user exit ) .
I thanks to you in advance,
Mail id [email protected]
Regardshi Jain,
take a look following doc
'Five Ways to Enhance SAP BI Backend Functionality Using ABAP.pdf' https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4493c4a6-0301-0010-62a2-efd6ded61e04
and check some samples
transfer routine
Date key figure: Convert DATS format to DEC format
Date Conversion in Flat File
Transfer Routine ABAP
conversion exit
Date Conversion
Problem with conversion char to numc in transference rules
conversion routine..?
start routine in transfer rules
Look up to load master data
excluding
Start Routine in Transfer Rules
Sample code in Update Rule to restrict data selection?
Append Datapak - transfer start routine
Excluding Blank field in Infopackage Filter
Trans Routine ABAP help ..
update routine
How to call a function in Update Rules to reverse a key figure sign
Need Sample Code for Update Rules
Date calculation
Difference between data in PSA and Data in Infocube
No RETURNCODE <> 0 allowed in update routines in transfer mode
the diffrerece between DEC and (yyyymmdd) 8 char in Time defination
Access master data in update rules
Date key figure: Convert DATS format to DEC format
start routine in update rules
Is it possible to read a third ODS in update rules between two ODS?
update rule coding while loading data from ODS to CUBE
Start Routine in Update Rules to populate additional fields from ODS
Coding in Update Rules accessing a Z-Table
Start routine
hope this helps. -
Triggering Process chains through abap code
Hi Experts,
Can you please let me know if it is possible to trigger a BW Process chain using an abap code.
If yes , kindly let me know the sample code.
Help done would be appreciated.
Regards,
UdayHi Thanks for your reply.
When I am trying to execute process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chain being executing through one ABAP program using the following code
CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
EXPORTING
I_CHAIN = 'XYZ'. ( Dummy Process chain name)
While executing this program I am getting following message :
You can specify the name of the application server here
on which all jobs in the chain are scheduled
If you do not specify a name, the jobs from batch
management are divided between the available servers
How to avoid this message.
Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
Your help is much appreciated. -
ABAP code Help for Customer Exit variable
Hello All,
Can anyone provide ABAP code for a customer exit variable please?
Requirement:
0CALYEAR(InfoObject) - ZCALCYR (Variable) <b>Calender year with default value actual year</b>.
Proiperties of variable: single value,mandatory,ready for input,can'be changed in query navigation.
i have read some docs on customet exit variables which i got from SDN but i found it's difficult for me to get this as i am not that good in ABAP.
Thanks,
Rakesh.Hi,
Just check the below code. You just need to make slight changes I believe. Hope this helps you.
In CMOD ..
Sample code
INCLUDE LXRSRF01 *
data: l_s_range type rsr_s_rangesid.
case i_vnam.
when 'ZCALCYR'.
if i_step = 1.
l_s_range-low = sy-datum+0(4).
append l_s_range to e_t_range.
Endif.
Endcase. -
How to send mail from ABAP code?
Hi,
I need to send e-mail from ABAP Code .
e.g: If sy-subrc ne 0.
( send e-mail to "[email protected]" )
endif.
Please provide me any Function module for this or any code.
Correct answear will be rewarded my maximum points.
Thanks & Regards,
Gaurav.Check this code sample
* Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
mailtxt = htmllines.
append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'HTM'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards.
Maybe you are looking for
-
Help with XHTML columns in IE6
I'm having some problems with my columns in IE6. The math is all correct and it lays out perfectly fine in firefox as expected. For some reason IE6 seems to be doubling the numbers I assign as my margins. Can anyone give me a tip as to what's wrong h
-
How do I create only SOAP WSDL bindings when deploying my ESB?
Currently when I use either jDeveloper or the ant deployESBSuitcase task to deploy the ESB that is the entry point to my application I get two bindings in the deployed wsdl. One soap binding that my client will be using and another esb binding. Is it
-
I have Acrobat 9 Standard at work. How can I edit PDFs using this?
Part of my job entails creating PDFs of web pages and then deleting non-essential materials. But, I have Acrobat 9 Standard. How can I do this with what I have?
-
ADF: Hide expendable icon in Master-Detail treetables
Hello, We are using a treetable in order to display Master-detail data. The problem here is that not all the master (parents) rows have details (childs). In fact we do not want to display the expandable symbol for the master rows which do not have ch
-
I recently bought some songs and now i can't find them.they are paid for what do i do?
i purchased some songs at itunes store and was charged for it. my computer went down and now those songs are not showing up. what do i do