ABAP Dump : TSV_TNEW_PAGE_ALLOC_FAILED in program SAPLCOM_PARTNER_OB

Hi All,
            I am getting the dump TSV_TNEW_PAGE_ALLOC_FAILED in program SAPLCOM_PARTNER_OB in LCOM_PARTNER_OB in line 165.
Short text
    No more storage space available for extending an internal table.
What happened
You attempted to extend an internal table, but the required space was not available.
The error is occuring in line
INSERT GS_CURRENT_PARTNERSET INTO TABLE GT_PARTNERSETS.
CT_PARTNER[] = GS_CURRENT_PARTNERSET-PARTNER[]. "#EC ENHOK
ENDIF.
   The amount of storage space (in bytes) filled at termination time was:
   Roll area...................... 6221152
   Extended memory (EM)........... 3909511400
   Assigned memory (HEAP)......... 2000692032
   Short area..................... " "
   Paging area.................... 417792
   Maximum address space.......... 18446697117078316543
The dump is occuring in the standard program. Is there any note for this.
Kindly help.
Thanks,

>             I am getting the dump TSV_TNEW_PAGE_ALLOC_FAILED in program SAPLCOM_PARTNER_OB in LCOM_PARTNER_OB in line 165.
>    Extended memory (EM)........... 3909511400
>    Assigned memory (HEAP)......... 2000692032
> The dump is occuring in the standard program. Is there any note for this.
Did you try a notes search?
This program is already using roughly 6 GB of RAM which seems quite a lot.
What transaction/process is triggering this error? It may be that a user just selects too much data.
Markus

Similar Messages

MB5L _ ABAP Dump - TSV_TNEW_PAGE_ALLOC_FAILED

Hi all,
While ruuning transaction MB5L, but giving below as selection parameter. i getting ABAP dump"TSV_TNEW_PAGE_ALLOC_FAILED" .
Company code:xxxx
G/L account"XXXX
**Select Balance,prev period
**Display Indiv.Matl Lines
As per client, they need this report..we implemented SAP notes and SPU, but still facing this error.
anyone can help this case?
Thanks and regards,
Prabakaran

Please see attached note 198596 which explains you may need to use report RM07MMFI when you are trying to
report on a large number of materials.
    This issue is due to the memory space required in internal table.
Please kindly check your setting for memory space. In standard system it
takes maximum 700 MB. This is the technical limitation.
    Please use report RM07MMFI to compare the stock values in MM
with the stock accounts in FI as desribed in note 921161.
    Runtime/memory consumption of RM07MBST can only be improved by
using reasonable selection settings.
    The report RM07MBST (MB5L) is not to be improved in its memory
consumption. The "correction" for the high memory consumption of the
report RM07MBST was the new development of report RM07MMFI.
369726 TSV_TNEW_PAGE_ALLOC_FAILED

APD master data join - ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED

Hi,
I have created an APD to join 3 ISU master data infoobjects
1. left join 0UCPREMISE with 0UC_CONNOBJ
2. left join 0UCINSTALLA with result of 1.
3. Store the data in ODS
When I did this in DEV (D4S) everything worked - but there is also much
less data in the master data infoobjects.
When running the APD in Test (Q4S) I get ABAP dump after a while (not
time out): TSV_TNEW_PAGE_ALLOC_FAILED
1. I have tried with the APD setting to store in internal memory to OFF
but the same problems occur.
2. I tried to create index (on /BI0/P* ) for fields part of the join
which was not table key but same problem occurs.
3. I have no filters for the joins as I want to get all master data in
the output ODS.
4. The size of the p-tables are:
/BI0/PUCPREMISE = 1 385 792
/BI0/PUC_CONNOBJ = 1 031 272
/BI0/PUCINSTALLA = 2 445 742
5. Components + SP level:
SAP_ABA     700     0013     SAPKA70013
SAP_BASIS     700     0013     SAPKB70013
PI_BASIS     2005_1_700     0013     SAPKIPYJ7D
ST-PI     2005_1_700     0005     SAPKITLQI5
SAP_BW     700     0015     SAPKW70015
BI_CONT     703     0005     SAPKIBIIP5
Linux / Oracle 10.2.0.2.0
6. Info from ABAP Dump:
Error analysis
The internal table "\CLASS=CL_RSMD_RS_UTILITIES\METHOD=DATA_TO_RETURN\DATA=L_SX
RETURN-TVALUE" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 200
Number of rows: 15
Allocated rows: 15
Newly requested rows: 64 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server q4s_Q4S_72 on host q4s (wp 12)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1881
The error reported by the operating system is:
Error number..... " "
|    Error text....... " "
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2755600
Extended memory (EM)........... 1977608256
Assigned memory (HEAP)......... 2000733904
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_RSMD_RS_UTILITIES==========CP" or "CL_RSMD_RS_UTILITIES==========CM006"
|    "DATA_TO_RETURN"
Anybody have any idea what i can do to be able to run this APD (in production I want to run it on a monthly basis). To me it seems the APD fills 2 gig of mem, I thought the APD option to not store the complete dataset in internal memory (using temp tables instead) would kick in before the 2 gigs was used. Basis team didn't want to raise mem paramenters if it could be sorted out any other way.
Thanks,
Johan

I have searched on my problem before posting here ofcourse - but somehow I missed this one, mentioned in 794257:
"InfoObject" data source
A dump occurs because of a memory overflow in the SAPLRSDM_F4 function group in the SD_CHA_GET_VALUES function module.
The InfoObject data source for reading master data is currently based on a function module that loads all data into the main memory in an inefficient data structure. As a result, the data source is only suitable for reading master data with a few data records. A memory overflow can occur for master data tables with lots of records such as business partners or products. This occurs regardless of how the "Process data in the memory" indicator was set.
If this situation occurs, set the InfoObject in such a way that it is available as an InfoProvider. Then use the "InfoProvider" data source instead of the "InfoObject" data source in the analysis process.
I'll try this...
//Johan

ABAP Dump GETWA_NOT_ASSIGNED_RANGE for program /SDF/CL_EM_DUMP_COLLECTOR=====CP

Hello,
I am getting ABAP runtime error GETWA_NOT_ASSIGNED_RANGE every 10 minutes in my ECC Production system. This dump is occurring for program /SDF/CL_EM_DUMP_COLLECTOR=====CP with short text as "Field symbol is not assigned".
Error Analysis:
"A field symbol that was not assigned was accessed
(data segment no. "-1").
The field symbol is no longer assigned because there was an attempt
makde previously in a Unicode program to set the field symbol using
ASSIGN with offset and/or length specification. Here, the memory
addressed by the offset/length specification was not within the
allowed area."
Information on where terminated:
"Termination occurred in the ABAP program "/SDF/CL_EM_DUMP_COLLECTOR=====CP" -
     in "GET_FIELDTABLE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 51
    of the (Include) program "/SDF/CL_EM_DUMP_COLLECTOR=====CM005"."
Server-Side Connection Information:
"Information on caller of Remote Function Call (RFC):
    System.............. "Solution Manager"
    Installation Number. " "
    Database Release.... 702
    Kernel Release...... 720
    Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchronous and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "
    Client.............. Prod Client
    User................ "SolMan user"
    Transaction......... " "
    Call Program........."SAPLE2EEM_DATA_COLLECTION"
    Function Module..... "/SDF/E2EEM_GET_DATA"
    Call Destination.... "SM_<ECC_PROD>_READ"
    Source Server....... "Solution Manager"
    Source IP Address... "Solution Manager"
    Additional information on RFC logon:
    Trusted Relationship " "
    Logon Return Code... 0
    Trusted Return Code. 0"
I searched for SAP notes and other SCN discussion but could not find relevant information. Can someone please assist me? Thanks.
Tanay

Hi Srivastava,
What process or transaction you are executing, when you got this dump, please share the detail.
In SAP there so many areas where we can have this ABAP dump, please also share the snap shot in ST22 " How to Correct" part of dump which carries the exact program name e.g. in below snapshot program name, short text, etc is given to search SAP note.
Please also refer to the following sap notes:
1840910 - Dump CHECK_SELOPT_ILLEGAL_SIGN
1729771 - Collective corrections as of ST-PI 2008_1 SP06
1011229 - ST-PI: Corrections for E2E Diagnostics
Regards
Javed

Abap - dump/job PSI_MECHANIK_2 (Program GP3KJGNMPNR0TSDBY8HHNGVSW8I010)

Hello guys,
I have a problem, I've got dump: job PSI_MECHANIK_2,...I have no idea why,...
Anybody can help me???
Thanks,
V.
DUMP DESCRIPTION:
An SQL error occurred when accessing a table.
What happened?
The database system detected a deadlock and avoided it by rolling back
your transaction.
Error analysis:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"G_DELETE_RW_EXTRACTS_PARALLEL" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.

GP3KJGNMPNR0TSDBY8HHNGVSW8I010 is a generated program. If this is SAP supplied stuff - raise an OSS note. You'll have to give more info. What is PSI_MECHANIK_2
matt

ABAP DUMP duirng generating query

I have an issue regarding the sap query.We are doing upgrade from ECC5 to 6.0.This problem generates in the new version of TST.
scenario is the client has DEV system and TST system.
After you create a query using transaction SQ01 it goes to custom transaction code which when excuted calls the sap program which generates sap query.When you execute the custom transaction code in DEV sys it is working fine and the Program is working fine.
But when you execute SQ01 in TST and execute it
it shows an ABAP dump saying the program AZ===*====is not in the library.(which is behind the custom transaction code)
In DEV we generated a query and released to TST but the program is not availabale in TST.Will the query be transported from one server to another.
there is one more to tell
When we go to transaction SQ01 and create a query it says correct the ranked list 01 first. this happens in both DEV and TST
do you think this is leading to ABAP dump.
Please help in fixing this problem as i am new to sap query
Please it is urgent experts please help.

Hi,
The above solution will work if you assign the transaction in one server, If you want this will not work in quality/production boxes when transported the query..the program name will not be the same in all the servers...
For this. Do the below:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
     D_SREPOVARI-REPORTTYPE = AQ
     D_SREPOVARI-EXTDREPORT = Name of the Query
     D_SREPOVARI-REPORT = User Group
Save the transaction..Now if the program is generated with different names in the quality/proudction, this will still work..
Regards
Vijay Hebbal

ABAP Dump when running S_ALR_87100205 (RFHABU00N)

Hi,
We are implementing New GL for a company code in Turkey. When I trying to run the report RFHABU00N for non-leading ledger, I am getting an abap dump because the program is not able to report the output for non-leading ledger documents. The report outputs correct information when executed for the leading ledger.
has any one else faced this issue in the past and if so how was it resolved.
We are currently on SAP ECC 6.04.
Thanks,
Nitin

Hi,
What is the dump message exactly? Anyway, for execution of this report for non-leading ledger, please, consult the following notes:
1883338 - RFHABU00N Long runtimes and termination
1965855 - RFHABU00/RFHABU00N: General Ledger View
1965562 - SAPDBBRF: Fiscal year not correctly delimited for non-leading ledgers
1939154 - RFHABU00N: Documents from non-leading ledgers ignored
Regards,
Eli

APD returns ABAP Error: TSV_TNEW_PAGE_ALLOC_FAILED

Hi
I'm trying to run APD for a virtual cube.
The design of the APD is as follow:
1. Read a Query (FM of a virtual cube query)
2. Filter the value
3. Aggregate the value
4. Output to text file
If I run RSRT to read the query, I'm able to get the query, and it's returning 936,210 rows.
However, when I run it from APD, it threw me the following errors:
Error analysis
    The internal table "\CLASS=CL_RSCRMBW_BAPI\METHOD=GET_AXIS_DATA_V2\DATA=LT_MPP"
     could not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 652
    Number of rows: 5,027,712
    Allocated rows: 5,027,712
    Newly requested rows: 16 (in 1 blocks)
Any idea what I can do to rectify this?
Your advice is much appreciated.

Hi,
This is a problem related to memory of internal table.
Please check the below links
APD dump TSV_TNEW_PAGE_ALLOC_FAILED
ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED
APD Dump: TSV_TNEW_PAGE_ALLOC_FAILED (but processed in database)
Re: TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Hope this helps
Thanks.

ABAP Dump Error - System error in program RSMDATASTATE

Hi Experts,
We have a Process Chain which loads data, fills aggregates and does a rollup.
Suddenly last week , the rollup step failed giving a error: No filled aggregates for the Cube
We ran the Program SAP_AGGREGATES_ACTIVATE_FILL.
After running the Program, the rollup happened for one day but again today while performing rollup we are encountering a ABAP dump.
The error analysis says: System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-
We checked the SAP Note : 858671, but we are not sure about the support packs.
Please Help.
Vivek Das Gupta

Hello.
Did you check note 1094948 if it was applied? Please apply this note and retest the report.
Thanks.
Walter Oliveira.

Abap Dump Syntax error in program "/SSF/SLIB " occuring in SOLMAN 7.1???

Hello Friends,
   After upgradation Solman 7.01 to 7.1, During EWA Alert management configuration in step 3 --> Check Software component level phase, we receiving below error.
   Also Syntax error in program "/SSF/SLIB " Dump is occurring inST22. Please find the Abap dump details attachment.
Please help me to resolve this issue.
Regards,
Farkath C

/SSF/SLIB comes from SP A/PI, if there were issues in old version then they should have been reported.
Upgrading may be a solution.
However, there references of ADD_CCDB_ABAP_EXTRACTOR
Execute RFC                                                                            |
|>>>>>| CASE LS_OPT-RFC_CALLTYPE.                                                                 |
| 1640|    WHEN 'SYNC'.                                                                            |
| 1641|      CALL FUNCTION '/SSF/CALL_SUBROUTINE_RFC'                                              |
| 1642|                                   DESTINATION LS_OPT-DESTINATION
That's why I am asking for the latest dump after the run of RTCCTOOL.
Regards

Facing ABAP dump in program SAPLGRAP that ABAP_2_DAT does not exist

We have an IDES ECC6.0 installation. We are facing some ABAP dump whenever any activity which involves a list is performed.
Eg: When in SU01 you click on user field and press F4 to get the list of present users, it shows following dump:
( Error in the ABAP Application Program
The current ABAP program "SAPLWDTM" had to be terminated because it has++
come across a statement that unfortunately cannot be executed.++
The following syntax error occurred in program "SAPLGRAP " in include "LGRAPFGL" in
line 1203:
"The FORM "ABAP_2_DAT" does not exist."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "AICAMT "
Error in the ABAP Application Program
The current ABAP program "SAPLWDTM" had to be terminated because it has
come across a statement that unfortunately cannot be executed. )
The WS_DOWNLOAD module itself is missing. Any idea on this?

Hi Uday,
Thanks for your responce.
The ECC6.0 system is at EHP 1 SP 14.
SM21 log shows the following:
Run-time error "SYNTAX_ERROR" occurred.
The details of this error is the same as mentioned in the previous post i.e
the FORM "ABAP_2_DAT" could not be found.
Regards,
Kushal Agrawal

Short Dump       TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          18.11.2009 12:12:09
Short text
     No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Try to find out (e.g. by targetted data selection) whether the
     transaction will run with less main memory.
     If there is a temporary bottleneck, execute the transaction again.
     If the error persists, ask your system administrator to check the
     following profile parameters:
     o ztta/roll_area            (1.000.000 - 15.000.000)
            Classic roll area per user and internal mode
            usual amount of roll area per user and internal mode
o ztta/roll_extension       (10.000.000 - 500.000.000)
        Amount of memory per user in extended memory (EM)
o abap/heap_area_total      (100.000.000 - 1.500.000.000)
        Amount of memory (malloc) for all users of an application
        server. If several background processes are running on
        one server, temporary bottlenecks may occur.
        Of course, the amount of memory (in bytes) must also be
        available on the machine (main memory or file system swap).
        Caution:
        The operating system must be set up so that there is also
        enough memory for each process. Usually, the maximum address
        space is too small.
        Ask your hardware manufacturer or your competence center
        about this.
        In this case, consult your hardware vendor
abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each dialog process.
Parameters for background processes:
abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each background process.
Other memory-relevant parameters are:
em/initial_size_MB:         (35-1200)
        Extended memory area from which all users of an
        application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin Sharma

hI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " "

Short dump TSV_TNEW_PAGE_ALLOC_FAILED when import SAPKB70016

Hi all,
I´m trying to import the support package SAPKB70016 im my QAS system and I got an error. The import stop on phase XPRA_EXECUTION and I saw at the tcode sm37 that there is a job running with the name RDDEXECL. This job is canceled with the dump TSV_TNEW_PAGE_ALLOC_FAILED. I already changed some parameters and also I applied some notes but I can´t solve this issue.
Parameter changed                Before                 After
ztta/roll_area                        30000000          100000000
ztta/roll_extension               4000317440        8000000000
abap/heap_area_dia        2000683008        4000683008
abap/heap_area_nondia      2000683008        4000683008
abap/heap_area_total       2000683008        4000683008
em/initial_size_MB                             392                    1024
abap/shared_objects_size_MB      20                     150
es/implementation                           map                     std
JOB LOG:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server FQAS were synchronized
ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Job cancelled
ST22 LOG:
Memory location: "Session memory"
Row width: 510
Number of rows: 0
Allocated rows: 21
Newly requested rows: 288 (in 9 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server FQAS_QAS_01 o
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhau
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1897
The error reported by the operating system is:
Error number..... " "
Error text....... " "
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 99661936
Extended memory (EM)........... 8287273056
Assigned memory (HEAP)......... 1376776176
Short area..................... " "
Paging area.................... 49152
Maximum address space.......... 18446743890583112895
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_ENH_UTILITIES_XSTRING======CP" or "CL_ENH_UTILITIES_XSTRING======CM008"
"GET_DATA"
Now, I don´t know what I can do to solve this problem.
Can you help me?
Thanks

Hi all,
Gagan, I already changed my parameters according to the above post. I increased this parameters until maximum allowed but the dump still persists.
Bhuban
In this server I have 16GB RAM and 600GB HD.
             total       used       free     shared    buffers     cached
Mem:      16414340    4973040   11441300          0     454436    3572592
-/+ buffers/cache:     946012   15468328
Swap:     20479968          0   20479968
Size Used     Avail Use% Mounted on
441G 201G   218G 48% /oracle
20G     6.5G    12G   36% /sapmnt
25G     21G    2.7G   89% /usr/sap/trans
25G    8.8G   15G    39% /usr
20G    14G    5.1G    73% /
Anil, I already stop my appl and my db, I rebooted my OS too and after i tried again, no success.
What else can i do?
Thanks for all.

All my B/G job canceling due to dump: TSV_TNEW_PAGE_ALLOC_FAILED

Hi SAP Gurus,
Production system SAP R/3 Enterprice. 4.7
OS:AIX 5.3
DB:DB2
memory Parameters are already set properly, there was no issues from past 3 years, We din't change any parameter recently.
All my Pay run B/G job canceling due to dump: TSV_TNEW_PAGE_ALLOC_FAILED
B/G job log
================
11/26/2007     03:01:22     Job started
11/26/2007     03:01:22     Step 001 started (program RBDSER01, variant YBD40_01, user ID BC-BATCH)
11/26/2007     03:01:22     0 master IDocs set up for message type CHRMAS
11/26/2007     03:01:22     0 communication IDoc(s) generated for message type CHRMAS
11/26/2007     03:01:23     0 master IDocs set up for message type CLSMAS
11/26/2007     03:01:23     0 communication IDoc(s) generated for message type CLSMAS
11/26/2007     03:01:23     0 master IDocs set up for message type CLFMAS
11/26/2007     03:01:23     0 communication IDoc(s) generated for message type CLFMAS
11/26/2007     03:05:53     ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
11/26/2007     03:05:54     Job cancelled
Please let me know ASAP,
Thanks & Regards,
Kishore.
null

Hi,
If you did'nt change anything in the system, you'd better open a SAP support call urgently as it is a production problem...
>>>Production system SAP R/3 Enter<b>price</b>. 4.7
Nice and well choosen typo !
Regards,
Olivier

Dump TSV_TNEW_PAGE_ALLOC_FAILED

Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Short text
     No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
           Amount of memory per user in extended memory (EM)
    o abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
           Of course, the amount of memory (in bytes) must also be
           available on the machine (main memory or file system swap).
           Caution:
           The operating system must be set up so that there is also
           enough memory for each process. Usually, the maximum address
           space is too small.
           Ask your hardware manufacturer or your competence center
           about this.
           In this case, consult your hardware vendor
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each dialog process.
    Parameters for background processes:
    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each background process.
    Other memory-relevant parameters are:
    em/initial_size_MB:         (35-1200)
           Extended memory area from which all users of an
           application server can satisfy their memory requirement.
Error analysis
    The internal table "\FUNCTION=MBEW_EXTEND\DATA=SEARCH_MBEWH_TAB[]" could not be
     further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 372
    Number of rows: 1157808
Allocated rows: 1157808
Newly requested rows: 32 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 5720752
Extended memory (EM)........... 2002747344
Assigned memory (HEAP)......... 2000756464
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLMG27" or "LMG27F02"
"SEARCH_EXIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
ANy ideas ?
Thanks to help.

Hi ,
How did you know that ?
In which line did you see it ? -> No more storage space available for extending an internal table. ?
So you suggest to increase the disk on AIX level ? -> /usr/sap/SID ... right ?
[:root:/usr/sap/SID:] df -m .
Filesystem    MB blocks      Free %Used    Iused %Iused Mounted on
/dev/lvusrsapSID   6272.00   2837.27   55%     1607     1% /usr/sap/SID
Thanks in advance,
J.
Edited by: Jordy_tof on Nov 7, 2011 12:38 PM
Edited by: Jordy_tof on Nov 7, 2011 12:48 PM

ABAP Dump : TSV_TNEW_PAGE_ALLOC_FAILED in program SAPLCOM_PARTNER_OB

Similar Messages

Maybe you are looking for