ABAP Function Module for Output File Compression of HTML file

We would to compress a HTML file that is created during a daily batch run so that it can be sent to the concerned users by email.
THerefore we are looking for a Function Module and code that can do this for us.
Please help.
You can contact me at [email protected]
Thanks.
Suresh Rao

Similar Messages

Abap function module for material standard price.

Dear Team,
Can anyone tell me the abap function module for getting material standard price respective of date and material code as input.
I have observe table MBEW, where we will get standard price of a material for last change date. Not getting any table where price is coming out wrt of Date for a same material.
Thx in advance
Rgds
sp
kolkata

HI.
FM MSR1_MD_MATPRICE_GETLIST should help.u.
Regd,
AS

ABAP function module for Customer Specific Status

I am looking for a standard ABAP function module that will return the customer specific status for a person.
Please let me know if any exists.
Thanks,
Harini

Customer specific status for a person .
Could you pleasee give more details...for what purpose you are trying to get the status of a person. so that it will be easy for everyone to search

ABAP Function module for BW

Hello Gurus,
I am not an ABAPer, I work in BW module.
I have a requirement to write a routine which will check the following logic
In BW, I have a field called Posting Date (0PSTNG_DATE). This field is currently set to sy-datum. But i need to write a routine which will find last friday's date and update this field with friday's date.
Eg: If sy-datum = 03/09/2007 then i need to populate posting date field as 31/08/2007.
Sy-datum can be any day of the week. But it should always write last week friday's date.
Is there any standard function module which i can use here.
Thanks in advance.
Cheers
POPS

Hi,
call function 'DAY_ATTRIBUTES_GET'
       exporting
            date_from                  = sy-datum
            date_to                    = sy-datum
            language                   = sy-langu
       tables
            day_attributes             = i_day
       exceptions
            factory_calendar_not_found = 01
            holiday_calendar_not_found = 02
            date_has_invalid_format    = 03
            date_inconsistency         = 04.
if i_day-weekday > 5.
   v_friday = sy-datum - ( i_day-weekday - 5 ).
endif.
if i_day-weekday < 5.
   v_friday = sy-datum - ( i_day-weekday + 2 ) .
endif.
if i_day-weekday = 5.
   v_friday = sy-datum.
endif.
a®

ABAP Function module for Display amount in word

Dear all,
Suppose amount is 100 and currency is USD then text display like 0ne hundred dollar. and suppose amount is 100
and currency is INR then text display like One hundred rupees.can you please suggest me what is the function module to used in smart forms.
Thanks and Regards,
Raheem.
Moderator Message: THE MOST FAQ question in SCN forums. And you never bothered to search.
Edited by: kishan P on Mar 1, 2012 2:19 PM

fm SPELL_AMOUNT

Crystal Reports for VS2010 using a custom SAP ABAP function module data source

I recently worked with Crystal Reports 2011 and was able to connect and retrieve data from our R/3 system via an ABAP function module. While researching other features, I found this version that can be installed into Visual Studio 2010. The parameters are not very user friendly in Crystal Reports so I was hoping to create a custom dialog to collect my report parameters.
Does anyone know if I were to install Crystal Reports for Visual Studio 2010, would I be able to design a front-end selection screen in a Visual Basic form and then pass the input to through the Crystal Reports connection to my ABAP function module to retrieve the data filtered on the back-end by the selection screen parameters and return the results to be reported in the Crystal Reports output?
I am using Visual Studio 2010 Professional Visual Basic with the .NET Framework 4.0 on 32-bit Windows 7. I was able to connect to our R/3 system in Crystal Reports 2011, so if I were to install Crystal Reports for VS2010, would there be a similar way of connecting to SAP?
Any assistance or direction would be greatly appreciated.
Thanks,
Bryan

Hello Bryan
I don't know for sure, but I doubt this will work in CRVS2010. Only hope is that the utility available for download in this KBA will point you in the right direction.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

Function Module for putting Flat File into Application Server

Hi Pals,
what is the Function module for putting my flatfile into application server..
because i dont have authorizations to put my flatfile into application server directly..
I know one function mudule is there for that ...so, can you suggest me.. what is the function module... for that..
thanks.. and points will be assigned..
chitti

Hi,
well normally you use the method GUI_UPLOAD of class CL_GUI_FRONTEND_SERVICES to upload a file from your client pc. Then you use the abap statements open dataset, transfer and close dataset to put the file to the app-server.
kind regards
Siggi

Function Modules for uploading the file

Hi experts ,
I have a requirement to download a file (csv) from my local sytem (say desktop) into an internal table first and then update the contents of the same internal table into the database table.
Can anybody provide me with a sample program for doing the same or at least the name of function modules for the same.
Prompt replies will be rewarded.
TIA
Abhishek

Hi Abhishek,
How to use INSERT Statement..
Check this Sample Program..
TABLES:MARA.
DATA:ITAB LIKE MARA OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
ITAB-MATNR = '123ABCDA'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
ITAB-MATNR = '123ABCDB'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
LOOP AT ITAB.
INSERT MARA FROM ITAB.
MODIFY MARA .
ENDLOOP.

Passing an XML file from WebDynpro app to ABAP function module

Hi all,
I'm stuck with a problem, and am hoping one of you could let me know how to proceed:
I need to pass an XML file (or at least the entire content of the XML) from my WebDynpro application to a backend ABAP function module. What I tried was this:
In my WebDynpro app, I read the XML and convert the content into one long string (using java.io.FileReader and java.io.BufferedReader). In my ABAP function module I created an import parameter of type String. I then imported the ABAP Function module into my WebDynpro app as a model. I then tried to pass the XML string to the ABAP module. What happens is this:
If the size of the string (XML) happens to be less than 255 characters, then it works. That is, the string is passed to the ABAP function module and I can see the contents. However, if the XML string happens to be greater than 255 characters, then it does not work. The string at the ABAP side is empty. Surprisingly, the ABAP module does not throw an error either. It just displays an empty string.
Could you please tell me what the problem is?
Thanks & Regards,
Biju

Hi Biju ,
Welcome to SDN.
If the import parameter is defined as type string it should work, however did you check whether your application pass it properly?
I have applications using strings as import parameters working fine. (webapplications (BSP) to RFC)
Regards
Raja

Issue in creating web service for a ABAP Function Module

Hi,
now i'm learning how to create web service for a ABAP Function Module. I used the following steps.
1. select the Function Module, named "zws_test".
2. in the context menu, select "create->proxy object". so we enter into wizard.
3. in the wizard, press the radio button "Service Provider".
4. in the next page, press the radio button "Existing ABAP Objects(Inside Out)".
5. In the next page, Enter the "zws_test_prvider" as Service Definition and select "Function Module" as Endpoint Type.
6. in the next page, enter "zws_test" as Function Module and mark the "Mapping der Namen" button
7. in the next page,select "PRF_DT_IF_SEC_LOW" as Profile and mark "Deploy Service".
8. Save in the local package.
9. then it will pop up a window with title "WSDL Source". i selected "URL/HTTP Destination" and press "OK".
10.in the next page, i enter the URL as "http://hostname:portnumber/", and press "OK".
11. then it will pop up a window with title "Display logs". A record with error message "HTTP error(return code 404, message "Not found")" appears.
12. i press "ok" and a service provider with name "zws_test_prvider" appears in my local package.
13. i use "zws_test_prvider"'s URL to create a service consumer "ZCO_WS_TEST_CONSUMER" and logic portal "LP1".
14. But when i test my service consumer "ZCO_WS_TEST_CONSUMER", it will throw an exception "cx_ai_system_fault" with errortext "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/".
15. I use t-code SM59 to test connection and get the following info.
      Status HTTP Response     200
      Status Text                      OK
      Duration Test Call             328 ms.
who can give me the reasons about item 11 and 14, and explain me how to create service provider and service consumer for a Function Module.
Thanks in advance
Johnney

have you seen this weblog
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices

Function module for transfering a file contents into another?

Hi all,
Is there a Function module for transfering a file contents into another?That is the whole content from a file to other??
Regards,
Shashank.

Hi,
I think there is no such FM. You need to read the data in internal table and then write it in another file.
Regards,
Atish

Function module for uploading file in background

hi friends
i am working on Inbound IDOC interface where in which i am creating a function module for that,
in which based on the idoc received , the interface has to choose the file from the shared folder and it has to move its contents to an internal table
can anybody suggest me what function module can i use.
we cant use GUI_upload,or cl_gui_frontend_services=>gui_upload
because this requires an user to interact in mines it is not the case
thanks in advance
with regards
s.janagar

hi,
check this thread,you will get idea how to transfer data from file to internal table.
[https://forums.sdn.sap.com/click.jspa?searchID=17706879&messageID=6281020]

Call ABAP function module from script?

Hi,
I have an ABAP function module, which works fine when I call it in a transformation.
Since I don't need to execute this function for each record but rather for each file I process, I would like to move the call from the DataFlow to a script in the WorkFlow. When I click on the 'functions' button the ABAP FM is available in my SAP Datastore, so I drag and drop it into my script. I also make sure to populate all required variables.
There are no error messages or warning when I check my job definition.
When I execute it, I get the following RFC error:
Function call <xxx ( abcd ) > failed, due to error <150413>: <RFC CallReceive exception <FUNCTION_NOT_FOUND>.>.
Is it just not possible to call an RFC enabled function module in SAP from a script or am I doing something wrong here?
Thanks,
Jan.

Could you please let me know how I can call an abap function module from a transformation? (from abap xslt program). I know how we can call methods of a class from the transformations, but no idea how we can call function modules. Any suggestions or a sample code snippet towards this will be very useful for me.
Thanks,
Shashi.

Function module for sundays in a month

hai all,
i need a function module for calculating noof sundays in a month

Hi Satya,
Please check this code which is checked for syntax also. Just copy and paste the same in abap editor and check the output.
Calculation of number of sundays ****
DAta : month1(2) type c,
       week1 type i,
       date1 type sy-datum,
       val1 type sy-datum,
       day1 type SCAL-INDICATOR,
       no_sundays type i.
week1 = 5.
date1 = '20060502'.
*- Function Module to fetch the Last day of the Month
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = date1
IMPORTING
LAST_DAY_OF_MONTH = VAL1.
*- Function Module to get the day of the week
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
DATE = VAL1
IMPORTING
DAY = DAY1.
*- Calculation of number of sundays
month1 = val1+6(2).
write : / month1.
if month1 = 31.
if DAY1 <= 2 or DAY1 = 7.
no_sundays = week1.
else.
no_sundays = week1 - 1.
endif.
elseif month1 = 30.
if DAY1 = 1 or DAY1 = 7.
no_sundays = week1.
else.
no_sundays = week1 - 1.
endif.
elseif month1 = 29.
if DAY1 = 7.
no_sundays = week1.
else.
no_sundays = week1 - 1.
endif.
elseif month1 = 28.
no_sundays = 4.
endif.
write : / no_sundays.
If found helpful, please do reward.

Function Module for search help Exit

How to create a function Module for search help exits?
please explain in details with step by step process.

Hi,
How to create a function Module for search help exits?
function module for search help F4IF_SHLP_EXIT_EXAMPLE
dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
please check out the link below it will help you
A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
please explain in details with step by step process.
create a search help exit:
1. create an fm with this interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR_T
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
put this logic in it:
Delete duplicate filter logic.
This logic only needs to apply at the 'DISP' event - which is just
before the hit list is displayed
if callcontrol-step = 'DISP'.
delete adjacent duplicates from record_tab.
endif.
2. edit your search help in se11 and enter the name of the above search help exit fm
check this sample code..for dynamic search help
REPORT ZTEST_F4HELP                              .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
            p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
          posnr type vbap-posnr,
          matnr type vbap-matnr,
          arktx type vbap-arktx,
        end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
       exporting
            dyname               = sy-cprog
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
       tables
            dynpfields           = dynfields
       exceptions
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            others               = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
       exporting
            input = p_vbeln
       importing
            output = p_vbeln.
select posnr matnr arktx into table help_item
                 from vbap
                      where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'POSNR'
            dynprofield = 'P_POSNR'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = help_item.
also check this link it will help you
/message/3854825#3854825 [original link is broken]
*********please reward points if the information is helpful to you*************

ABAP Function Module for Output File Compression of HTML file

Similar Messages

Maybe you are looking for