ABAP Proxy authorization issue when sending message.

Hi
We have an interface which uses ABAP proxies. This is used to send a message with attachment, but when i send the message I am getting a 401 error message which says unauthorized.
I checked all the configs on the sending side and i cant fine anythin wrong. I tried SLDCHECK and all looks fine there as well. I have done the configuration in the Integration engine on the sending side as mentioned in the BLOG - Activating ABAP Proxies.
We have 3 XI systems Dev, QA and Prod sharing the same SLD. The configs that we have on the sending system (App Sys.) is given below.
SM59
HTTP connection : SAPISU_XID
Host : XI Dev hostname Service Number 8080 (80 <sys number>)
Path Prefix : /sap/xi/engine?type=entry
USER : XIAPPLUSER
The TCP/IP connections LCRSAPRFC and SAPSLDAPI are also setup on the system which connects to our SLD.
The TCP/IP connections works fine and i am able to test it succesfully, but the HTTP connection fails with an authorization error (401) when i test it. Now the wierd thing is if I use XIAFUSER instead of appuser it works fine, but if i make a copy of XIAFUSER and try that... It fails again.. I know it sounds strange. So i was wondering if there is any setting on XI which restricts HTTP connections to a particular user??
I would really aprpeaciate if you could please give me your thought on this issue...
Cheers
Prav

Hi Manish
Thanks for the input again.
I checked SICF on the XI system and its not set to any user.
The HTTP connection on out prod environment is working fine without any issues and its uses a user which is a copy of XIAPPLUSER. SICF in prod also does not have any user configured for service SAP\XI\Engine.
Thanks for the link, had a look at it, but It looks like these users mentioned are only available with XI7. Our server was upgraded from 3 to 7 and I am not able to find these users on the system.
I tried testing the HTTP connection in prod using a diffrent user and found its the same story there. If i use any use other than the cutom one.. it fails.. could there be any setting in the exchage profile that can affect this??
Thanks for your time and help.
Prav

Similar Messages

Test message from RWB: Error when sending message: 401 Unauthorized

Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
Gourav

Yes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav

Error when sending message: 404 not found

Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.

Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod.

RWB:Error when sending message: 404 Not Found

Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0

Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish

Error when sending message: Method not implemented

Hi, All:
We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
"Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
Thanks
Liang

HI Liang
Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
Thanks
Gaurav

Error when sending message(e-mail) from Process Chain ?

Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started                                                                          00        516         S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S
30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S
30.06.2006 18:06:01 Job finished                                                                        00        517         S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141

Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                     Duration   Duration
                         Completed Error      In transit Waiting    In transit Waiting
                                                                         hh:mm      hh:mm
B08(100)                        0          0          0          0
FAX Telefax              0          0          0          0       0:00       0:00
     5 INT Internet             0          0          0          0       0:00       0:00
SMTP              0          0          0                  0:00       0:00
X40 X.400                0          0          0          0       0:00       0:00
        RML R/Mail or            0          0          0          0       0:00       0:00
        PAG                      0          0          0          0       0:00       0:00
        PRT                      0          0          0          0       0:00       0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar

Error when sending message: 403 Forbidden....sender si file

hi...
here iam working with File to IDoc scenario
file is picking from a particular source but its is not showing any messages in SXMB_MONI and in IDX5 (outbound) or in RWB.
when i check test my message in RWB its is showing Error when sending message: 403 Forbidden.
can anyone explain me this problem plz...
all my DESIGN and CONFIGURATION is fine....
its urgent...
THX..
john wesly

Hi John
403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
first try to solve problem by making CACHE refresh
either by directory
Check whether you have given the right credentials. If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

Strange characters when sending messages in Mail 2.1.2

When sending messages from Mail 2.1.2 , some of the recipients get strange characters when opening my messages
I use a french keyboard with ponctuations that appears to the recipients as black diamond with ponctuation marks in the middle.
Is it something from my end?

Here is some info on the problem. Sending plain text instead of rich text is the easiest thing to try.
http://homepage.mac.com/thgewecke/woutlook.html

Error when sending message: 500 Timeout

while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.

Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini

[svn:bz-trunk] 21494: bug fix BLZ-581 Possible deadlock situation when sending message

Revision: 21494
Revision: 21494
Author:   [email protected]
Date:     2011-06-29 11:25:54 -0700 (Wed, 29 Jun 2011)
Log Message:
bug fix BLZ-581 Possible deadlock situation when sending message
change the scope of lock EndpointPushNotifier.pushNeeded to be minimal (retrieving the messages from the message buffer), that way, we can avoid the connection write failure to occupy the lock forever.
Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-581
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java

Adobe has donated BlazeDS to the Apache Flex community, and the source code is hosted on the Apache Flex website in a GIT repository.
http://flex.apache.org/dev-sourcecode.html

[svn:bz-trunk] 21209: bug fix BLZ-581 Possible deadlock situation when sending message

Revision: 21209
Revision: 21209
Author:   [email protected]
Date:     2011-05-04 18:26:18 -0700 (Wed, 04 May 2011)
Log Message:
bug fix BLZ-581 Possible deadlock situation when sending message
change the scope of lock EndpointPushNotifier.pushNeeded to be minimal (retrieving the messages from the message buffer), that way, we can avoid the connection write failure to occupy the lock forever.
Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-581
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java

Adobe has donated BlazeDS to the Apache Flex community, and the source code is hosted on the Apache Flex website in a GIT repository.
http://flex.apache.org/dev-sourcecode.html

When sending messages from my iPad its says cannot send message retry

my iPad is saying error retry when sending messages over to my friends

A few more details would really be helpful. Describe how this all comes about.

When send message it's says " messagae send failure" but message already send.why?

when send message it's says " message send failure" but message alredy send.why?

Go through the troubleshooting steps under "If you see 'Waiting for Activation'..." in this article: http://support.apple.com/kb/ts4268.

ABAP Proxy authorization issue when sending message.

Similar Messages

Maybe you are looking for