ABAP proxy to file-Create package in SPROXY
hey guys
i m doin ABAP proxy to file scenario,and when i try to create a ABAP proxy its asking for the package and prefix,do any of u know how to create a package ?
also if there are any inbuilt packages that i can use
thanx
ahmad
Ahamd,
use custom packages and you can give prefix start with zxx_
thanks
Prasad
Similar Messages
-
Problem with Configuration in Production ( ABAP Proxy - XI - FILE)
Hi All,
I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
Correct the direction or choose another communication channel
BS_MA_FileServer_PRD - Business System (FILE)
CC_File_PedidosServ_MA_FileServer_IA - My FILE Communication Channel
This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
Hope you can help.
Points will be given.
tks.. DanielaYou have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
But the error pasted by you clearly shows syntax of a Sender Agreement .
For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
Bipin -
ABAP proxy scenario file - PI7.1- ECC NO_MAPPINGPROGRAM_FOUND
Hello Experts,
I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the software component.
What i found in TCODE SXMB_MONI is 2 adaptor call one from one below the other out of which one is in error.
Also when a file is passed from the file server to the SAP PI I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
Request you help on urgent basics
BR HethHi,
1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
Regards
Mickael -
PCK XI adapter - ABAP Proxy to File Scenario How to?
Hi there,
We want to implement the following sceanrio; SAP ABAP outbound proxy to Flat-File scenario. A (sender) SAP system will trigger an outbound proxy which will send outbound data to a (receiver)file system via the PCK and Central Integration Server.
SAP (ABAP proxy) -> PCK-> XI -> File System
My question is; The PCK documentation suggests that the XI adapter included in the PCK can only be used to send/forward messages to the central integration server.
Does that means that one cannot use the same XI adapter on the PCK to redirect ABAP proxy messages to the Integration server?
Thanks,
RobertoThe PCK cannot be used as a replacement for XI Integration server. PCK is only a type of adapter engine that can run independantly. It is intended for partners who cannot use XI server. So PCK can not in itself execute interfaces. It can just forward all the messages received to the XI Integration server. PCK can only run your sender or receiver adapter all the mappings can only be executed on the integration server. So PCK just converts from the native format to XI format and forwards to the Integration Server.
Hope that carifies your question .
Thanks,
Kalyan Musunuri -
ABAP Proxy to File - questions
Hi,
i have tried the following blog:
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
and found out that´s not possible to send the message through proxy from the IS(same client as the proxy). right ?
What settings have to be made in our SAP ERP R/3 application System to sent the message the ERP system ?
Thx,
GordonHi,
i have tried the following blog:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
1387
and found out that´s not possible to send the message
through proxy from the IS(same client as the proxy).
right ?
As michal said, you can't create server or client proxies in the same client of the Integration Server, since it doesn't make sense to send a message from one logical system to itself.
What settings have to be made in our SAP ERP R/3
application System to sent the message the ERP system
Now I got confused.
You mean you want to do XI (ABAP Proxy)> R/3 scenario?
Or do you want to call one function in R/3 from another function in R/3?
Regards,
Henrique. -
RFC(ABAP Proxy)-------XI-------- FILE Asynch
Hi All,
Good evening.
Please let me clear one thing, the message automatically comes into XI when executing proxy at R/3 side? or we have to send from RWB by using the path
component monitoring-->Proxyruntime----->sendmessage
there we paste the message from SXMB_MONI of R/3?
Please clarify my doubt ASAP.
Thanks & Regards,
Nagarjuna.Hi
You can test the scenario from SXMB_Moni of R/3.
Or you can call the execute_synchronous method and the whole scenario will work fine.
Please refer below scenarios
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04s/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
Setting Up Point-to-Point Connections with proxy
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
Thanks
Swarup -
ABAP proxy to FILE - filename partly build from PAYLOAD
Hi
I have an ABAP proxy sent from SAPBACKEND ->PI->FILE
I need to build the filename dynamically based on a template "FILENAME"+variable1.XML
Variable 1 is from the payload - so a field in my XML - "FIELDVAL".
How to extract the value from the payload and build the filename dynamically?
Can I use substitution values in the filename in the CC? or must I build up the entire filename in UDF?
We are using PI 7.11
CheeersHi,
You can do this either by Dunamic configuration (Writing a UDF) OR by variable substitution..
Check below links
http://wiki.sdn.sap.com/wiki/display/Snippets/SAPXIDynamic+Configuration
http://wiki.sdn.sap.com/wiki/display/XI/CombiningthreedifferentaspectsofPIinoneshot
/people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name
Amol -
I am using proxy to attach pdf file, In PI, I have 2 payloads. I want to send PDF payload to File receiver adapter.
Suggestion?Hi,
if you cannot use payloadswapbean
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/content.htm
then just put the PDF into the main payload in the proxy (one field) and cut correctly in the mapping so only the PDF will be send to the file
Regards,
Michal Krawczyk -
ABAP client proxy to File scenario
Hi,
I am doing ABAP client proxy to File scenario.
I have followed Ravikumar allampallam blog i.e https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1387. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
My abap proxy has successfully created 4 objects:
1)ABAP Class ( ZCO_ MIOA_ABAP_PROXY).
2. Structure for the message type in ABAP Data Dictionary (ZMT_PROXY).
3. Structure for the data type in ABAP Data Dictionary (ZDT_PROXY_SRC).
4) Table type (ZSTRING_TAB).
can u tell me how can i fetch data from database table into structure?Hi,
see first create the data type,msg type, msg interface and go to R3 instance of Xi and use SPROXY transaction , locate your SWCV,namespace, intreface ( outbound) and create the proxy , later give the name starts with z, later in ABAP program create the internal table of type of the Structure for the message type in ABAP Data Dictionary (ZBLOGEMP_PROFILE_MSG )
so follow the code and explained about each ob, structure of Msg ..
Regards
Chilla -
Number of structures in package for ABAP proxy
Hey guys,
do we need 4 levels of structures in package for a simple ABAP proxy to file scenario,isn't there any inbuilt package which can be used(cant we jst use $TMP as it is )?
thanx
ahmadhi,
they (those structures) look like the messages interface that you created in the Integration repository
have a look at the data type (on which message interface is based on)
and this weblog
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
the structure will have all the fields from the
data type
is it clearer now ?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Hi,
I need to create abap proxy in sap system to push the data from sap system to XI.
when i create ABAP PROXY in sap system in Tcode SPROXY,System displays a error
"objects from other name spaces missing" .
So i am not able to activate the abap proxy.
kindly let me know how to solve this error.
Regards,
GaneshAre you using the message type created in external system?
Are any of your Data type element refer structure to other namespace.
Error mention that it does not find the detail structure of any of Datatype element. Check all link are available properly.
Gaurav Jain
Points if answer is helpful -
Interface ABAP Proxy - File - Synchronous - (Is it possible???)
Hi Experts,
I want execute ABAP Proxy which will create File in FTP. On final, i need return "OK" information to the ABAP Proxy.
Is it possible? ABAP Proxy <-> File Synchronous? Without BPM and Custom Module Adapter. Just using RequestResponseBean???
Tks in advance.Hi Raj,
Tks. I implemented the Acknowledgements Request and changed the ABAP Proxy to Async. But the Ack returns to the ECC with the error and is not saved in the Message. The error follows below:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Update Acknowledgment Status of Request Message
-->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">REQUEST_MESSAGE_NOT_FOUND</SAP:Code>
<SAP:P1>4EE24DEB4EA60650E10080000A09071E</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3></SAP:P3>
<SAP:P4></SAP:P4>
<SAP:AdditionalText></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack>Requisição mensagem 4EE24DEB4EA60650E10080000A09071E pipeline CENTRAL versão desconhecida</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any Idea about this error?
Tks in advance. -
ABAP Client Proxy to File (File is not getting generated)
Hi All,
I'm trying out a scenario ABAP proxy --> XI --> FILE.
I have followed the given blog to create ABAP client proxy.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
While executing the ABAP client proxy, the values are properly sent to XI and in the SXMB_MONI the message shows as successful. But the correspoding file is not created.
It seems everything is fine in the receiver adpater(Monitoring) and in the SXMB_MONI also the msg shows successful(receiver side).
The directory path and the corresping file creation parameters also looks fine.
Couldn't figure out what went wrong. Please help me on this.
Thanks,
Ajay.Hi Smitha,
Please find below the Call Adapter trace
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.0</Trace>
<Trace level="2" type="T">Host = iscsapapp4w:8010</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>
<Trace level="2" type="T">Remote address = 10.191.117.166</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0000</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) ACN_LEGACY2_04_BS MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOM2__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 791955998E03380CA938A0130A348AFB</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 3475AE80930811DAA18DC14C0ABF75A6</Trace>
<Trace level="1" type="T">Interface Mapping http://accenture.com/xi101/ABAPclientProxy IM_Valuemapping</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Valuemapping_.</Trace>
<Trace level="3" type="T">Load 3475ae80-9308-11da-a18d-c14c0abf75a6, http://accenture.com/xi101/ABAPclientProxy, -1, com/sap/xi/tf/_MM_Valuemapping_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_Valuemapping_.class (http://accenture.com/xi101/ABAPclientProxy, -1) in swcv 3475ae80-9308-11da-a18d-c14c0abf75a6.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Valuemapping_ completed. (executeStep() of com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-ACN_Sender_BS_XI</Trace>
<Trace level="2" type="T">-ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">http://accenture.com/xi101/ABAPclientProxy.MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Channel found: - ACN_LEGACY2_04_BS - ValueMap_Repl_Receiver1</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.nw2.iscsapapp4w</Trace>
<Trace level="3" type="T">URL = http://iscsapapp4w.idcsap.com:51000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = XIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:19Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks,
Jothivel. -
Performance problem in File to ABAP Proxy scenario
Hi gurus,
I have a scenario where the sender is sending a file and the receiver is ABAP Proxy.The file is a simple DAT file containing banking data.The file sample is as belo
00000MM21901 PYM0901021531
704401020100005510000040000D0002
704401020127147391000033500D0003
704401020127147391000045000D0004
704401020109341157000038800D0005
70420!!!!10200000182174D
704401021100006040000015158D0001
704401021100006040000005034D0002
7042010210000020192D
The above file need to be split and mapped to the fields of the ABAP Proxy after doing some validations.
Is Receiver Determination using mapping required? What is the most efficient way of splitting the file?
Please give your replies keeping better performance of the interface in mind.What is the best way of doing the validations?
regards
DebansuHi Satish,
As you can see in my question above,the sender side contains a flat file(the file format is given in the question),I need to split the file into strings which can then be mapped to specific fields of the ABAP Proxy.A sample output of the xml file that is passed on to the ABAP proxy after mapping transformations is given below:
<BATCH_TOTAL_RECORD_420>
<BATCH_REPORT_DISTRICT>70</BATCH_REPORT_DISTRICT>
<KEY_VALUE>420</KEY_VALUE>
<BATCH_NUMBER>1021</BATCH_NUMBER>
<BATCH_TOTAL>0000020192</BATCH_TOTAL>
<FILLER_BATCH_TOTAL_SIGN>D</FILLER_BATCH_TOTAL_SIGN>
<FILLER />
</BATCH_TOTAL_RECORD_420>
- <BATCH_TOTAL_RECORD_420>
<BATCH_REPORT_DISTRICT>70</BATCH_REPORT_DISTRICT>
<KEY_VALUE>420</KEY_VALUE>
<BATCH_NUMBER>9999</BATCH_NUMBER>
<BATCH_TOTAL>0000202366</BATCH_TOTAL>
<FILLER_BATCH_TOTAL_SIGN>D</FILLER_BATCH_TOTAL_SIGN>
<FILLER />
</BATCH_TOTAL_RECORD_420>
I hope now you can provide me some answers.
Regards
Debansu -
ABAP proxy code using internal table
Hi XI guru's,
Good Afternoon,
My Scenario is ABAP Proxy to file using ztable.
i am getting data from Sap R/3 data base as Ztable. using this Ztable i have to write ABAP Proxy code. I generated ABAP Proxy and mentioned all below.Please send me ABAP Proxy code using this details. This is very urgent. Please help me.
ABAP proxy class: zco_mioa_tata
structure : zmt_tata
structure : zdt_tata
structure : zdt_tata_employee
Table : zdt_tata_employee_tab
Ztable : zcnu_proxy_table
outbound structure:
mt_tata
employee
thanks and regards
saiSai,
I guess this will help you.
1. Proxies can be a server proxy or client proxy. In our scenarios we require proxies to send or upload the data from/into SAP system.
2. One more thing proxies can be used if your WAS ≥ 6.2.
3. Use Tcode SPROXY into R/3 system for proxy use.
4. To send the data from R/3 system we use OUTBOUND PROXY. In Outbound proxy you will simply write an abap code to fetch the data from R/3 tables and then send it to XI. Below is the sample code to send the data from R/3 to XI.
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sarvesh'.
it-emp_profile_msg-empno = '01212'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work.
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
ENDTRY.
Receiver adapter configurations should be done in the integration directory and the necessary sender/receiver binding should be appropriately configured. We need not do any sender adapter configurations as we are using proxies.
5. To receive data into R/3 system we use INBOUND PROXY. In this case data is picked up by XI and send it to R/3 system via XI adapter into proxy class. Inside the inbound proxy we careate an internal table to take the data from XI and then simply by using the ABAP code we update the data inot R/3 table. BAPI can also be used inside the proxy to update the data into r/3.
I hope this will clear few doubts in proxy.
Just go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
ABAP Server Proxies By Siva Maranani
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Generating java proxies..
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
/people/rashmi.ramalingam2/blog/2005/06/25/an-illustration-of-java-server-proxy
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Regards,
Sarvesh
Maybe you are looking for
-
ITunes won't sync all my purchased music to my iPhone 4
The music that was purchased on my iPhone was erased from my phone, but it's still on iTunes. When I try to sync it back to my phone, the playlist "Purchased from my iPhone" is listed is there but none of the music is there. It's not in my library ei
-
Macbook pro-bought for myself, now gift to my parents
I currently have a macbook pro, and have had it since May. I would like to give pass it down to my parents to have a fast machine at home.. How do I erase everything, setup their own account, etc.. so that when they receive it in the mail, they will
-
Webi Hyperlink to SAP Content Server
Hi folks, My customer is trying to use a hyperlink; http://opentext.samca.net:8080/archive?get&pVersion=0045&contRep=D1&docId=4945274BD42AD25FE10000000AC819E6 in his Webi report to launch a document stored on his SAP Content Server. However the url w
-
Hi there I have an iPod touch and have found that safari has gone really slow. It takes ages to load the page and zoom in and out also scrolling up and down. It al started when I let my kids aged 11 and 9 used it. They where not as careful as me whe
-
It seems when I email a file, i can't get rid of it or eject the media it is housed on once the email is sent because firefox is still "using" the file. == This happened == A few times a week == A few weeks ago