ABAP Proxy to HTTP Synchronous

Hi All,
My scenario is ABAP Proxy to HTTP POST synchronous, while I am trying to execute the scenario I get the following error in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>404</SAP:P1>
<SAP:P2>Not Found</SAP:P2>
<SAP:P3><Exception><Status>The resource you requested does not exist</Status><Reason>Event does not exist</Reason><Code>404</Code></Exception></SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 404 reason Not Found explanation <Exception><Status>The event resource you requested does not exist</Status><Reason>Event does not exist</Reason><Code>404</Code></Exception></SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What I understand is the target HTTP server sends a error response because my request xml data is not valid
How do I structure my response message type and how do I map this response to the calling ABAP Proxy. The target HTTP server says if the data is fine they will send a success message in the http header, how do i map this response from http header back to calling ABAP Proxy.
Thx in advance
Ravijeet

Hi Abhishek,
The target http server says that if my xml request data is valid then they will send a response back in the http header in a field call route.
And if the xml request data is not valid then they will throw an exception, which I am getting from the target http server as below in SXMB_MONI :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Bad Request</SAP:P2>
<SAP:P3><Exception><Status>Bad Request</Status><Reason>ActivityId and ActivityStep combination already exists</Reason><Code>400</Code></Exception></SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 400 reason Bad Request explanation <Exception><Status>Bad Request</Status><Reason>ActivityId and ActivityStep combination already exists</Reason><Code>400</Code></Exception></SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
What I want to know is do I need to create a response message type as below:
<?xml version="1.0" encoding="UTF-8"?>
<Exception>
 <Status/>
 <Reason/>
 <Code/>
</Exception>
Thx in advance
Ravijeet

Similar Messages

ABAP proxy to HTTP sycnchronous scenario.

Hi All,
I have an ABAP proxy to HTTP syncronous scenario in which the proxy through PI makes an HTTP request to a third party to download a PDF.Once the PDF is sucessfully downloaded we need to send an acknowledgement to ECC system that the download was sucessful and also place the PFD file in an FTP server as well.
Looking forward for any possible ways that the above scenario could be achived in once interface.We are open to use ccBPM to achive this.
Thanks in advance.
Best Regards,
Bhanu.

Hi Bhanu,
if this is a sync request to a HTTP receiver (to initiate with the request a PDF upload) you will expect to get a response back to the Proxy sender.
So following the described implementation the response will provide the information about un/successfull PDF load
from the http receiver (so this partner has to provide a response in a sync connect!!!).
If you need the PDF to be moved back to a location near to the proxy sender additionally to the response message the receiver of the proxy trigger has to return both in the sync response but the proxy is not able to receive an attachment.
And... as I know HTTP adapter does not allow to handle attachment. This is only possible with SOAP !
So in such a case the PDF needs to be provided with another adapter (which would allow to use a sync connect Proxy-> HTTP and another one async from the PDF loader via file adapter (file -> file). So this will not require a BPM too!
a) Proxy-> PI -> HTTP (sync)
b) FTP -> PI -> FTP (async)
Result: No BPM required!
Regards
Dirk

Abap proxy method execute synchronous

hey guys,
im new at XI and am posting this thread in the hope that someone would explain to me, what is required of the method "execute synchronous" in an abap proxy.
thanks

Hi,
Execte_Synchronous is used to send the message synchronously. Similarly execute_asynchonous is used to send the message asynchronously.
Some theory about proxy.
1. Proxies can be a server proxy or client proxy. In our scenarios we require proxies to send or upload the data from/into SAP system.
2. One more thing proxies can be used if your WAS ≥ 6.2.
3. Use Tcode SPROXY into R/3 system for proxy use.
4. To send the data from R/3 system we use OUTBOUND PROXY. In Outbound proxy you will simply write an abap code to fetch the data from R/3 tables and then send it to XI. Below is the sample code to send the data from R/3 to XI.
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sarvesh'.
it-emp_profile_msg-empno = '01212'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work.
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
ENDTRY.
Receiver adapter configurations should be done in the integration directory and the necessary sender/receiver binding should be appropriately configured. We need not do any sender adapter configurations as we are using proxies.
5. To receive data into R/3 system we use INBOUND PROXY. In this case data is picked up by XI and send it to R/3 system via XI adapter into proxy class. Inside the inbound proxy we careate an internal table to take the data from XI and then simply by using the ABAP code we update the data inot R/3 table. BAPI can also be used inside the proxy to update the data into r/3.
I hope this will clear few doubts in proxy.
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
ABAP Client Proxy (Outbound Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Regards,
Sarvesh

ABAP Proxy throws HTTP-400 error

Hi,
I've created an ABAP Proxy/Enterprise Service in ECC6.0 to consume a webservice that is created in NetWeaver 2004s. Now, when I want to test the proxy, it gives me the error message:
SOAP:1.007 SRT: Unsupported xstream found: ("HTTP Code 400 : Bad Request")
The error originates from class CX_AI_SYSTEM_FAULT
I don't know if it is related to the proxy or with some system settings on ECC 6.0/Netweaver2004s.
Any help or document reference is appreciated.
Regards.

I investigated a little and here are a couple of things you could try:
- In note 1139406, they are talking about a scenario with HTTP error 404... I realize it is different than the 400 you get, but it may be worth checking if you have a similar problem as described there - it may give a clue what your problem is.
- Try to check if the endpoint URL to which the request is sent is correct... it may be missing the style parameter, like ?style=document. Go to SOAMANAGER and take a look at the system settings, perhaps there is a wrongly formulated URL that is missing the style parameter.
Hope this helps a little...

Make Sender ABAP proxy transport HTTPS

Hi Experts,
I have a sender ABAP proxy scenario without CC configuraiton. Now if i want to HTTPS for data transportation from R3 to PI. What could be the possible ways?

Hey,
>Now if i want to HTTPS for data transportation from R3 to PI. What could be the possible ways?
Yes,
Create the Port for HTTPS, Install the certificates , Change the parametr in Visual admin for HTTPS call.
Cheers
Agasthuri

Using of Integration Scenario in a Abap Proxy to JDBC receiver synchronous

Hi ,
Can any one help me out how to go about for creating Integraion scenario in ESR as i'm new to the use of Integration scenario..
its an Abap proxy to Jdbc synchronous scenario... kindly help in this regards.

Hi Indudhar,
Right click on the namespace where you want to create the IS and say new, Select process integration scenario option, give a suitable name and say OK.
In the Component View section right click on the first grey column and Insert a sender Application component. Enter ur product and the software component version. Like wise in the next grey column enter the target Application component.
Now go to the top level menu and click on view and select grid.
Now right click on each App. component and insert the created actions. If the scenario is sync then the actions will be side by side otherwise the target one will be in the next grid of the target app. component.
After entering the actions click on the source action then press shift and click on the target action, right click and choose create connection between the two actions.
Fill in the info and then save.
Regards,
Anshul

PI to ECC via ABAP Proxy - Outbound Queue for HTTP

Dear Experts,
Is there any Outbound Queue for HTTP?
I've a interface scenario where the receiver is SAP ECC and the receiver adapter XI ABAP proxy. As I see in the communication channel the transport protocol used is HTTP. So I think could there be an outbound queue to manage HTTP connection when PI send the data to SAP ECC?
Just like when we are sending IDocs to ECC via tRFC, we could check if the IDoc has really been sent to ECC by checking in tcode SM58 (Outbound tRFC).
In case for ABAP Proxy via HTTP, is there any similar connection to SM58 (IDoc via tRFC)?
Thank you,
Suwandi C.

Hi Kandasami,
Thank you for the reply. I will check for it.
Hi Jens,
Yes, I mean somewhere after the SXMB_MONI in PI and before SXMB_MONI in ECC, is there any queue in between those two?
Thank you,
Suwandi C.

ABAP proxy prerequisites.

Hi All,
Can any one please give me what steps i need to follow before creating ABAP proxy.
I need to create RFC Destination from my R/3 system to XI using HTTP type.
After creating this i need to enter this RFC Destination details in SXMB_ADM.
Are these connections enough to see my message interfaces in my R/3 system using Sproxy Tcode.
I have already gone through
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
In that Why that TCP/IP connection? and from which system to which system that connection is?
Can anybody please give all the necessary steps before creating ABAP proxy...?
Thanks & Regards,
Ramana.

Hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Thanks,
Satya Kumar

Client ABAP Proxy

Hi All,
Good afternoon. I have one requirement to work on to work on FILE->XI---->RFC(synch) scenario using BPM. I am new into BPM. Any body have the step-by-step documentaion, please send me ASAP.
I am very thankful to you in advance.
Thanks & Regards,
Nagarjuna.

Hi,
Ur subject is about Proxy and in thread ur asking about File to RFC,
Check this link.
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
- File to RFC
About abap proxy.
ABAP Proxy
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
ABAP CLIENT PROXY
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP SERVER PROXY
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
To test a connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Server Proxy - /people/siva.maranani/blog/2005/04/03/abap-server-proxies
Some links on BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
Regards,
Phani
Reward points if Helpful
Edited by: phani kumar on Feb 25, 2008 11:44 AM

What are the pre-requisite for ABAP Proxy communication?

What are the pre-requisite for ABAP Proxy communication?

hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
regards
srinivasreddy

Problem with numeric types in Abap Proxy

Hello,
We are having problems with some abap proxy calls. When a numeric type is filled with 0 the node it´s automatically removed and no value it's recived in XI. The only way I have found to avoid this problem it's to define the field with type string or change the cardinality to 1..1 instead of 0..1. It's there any way to maintain the type and the cardinality?? Maybe with a pattern??
Regards,
Alberto Pla.

Hi Alberto
I had this problem, and I decided to use xsd:string instead of xsd:integer. This will solve the issue.
Anyway.. check this note:
[Note 1242795 - Mapping of XSD default values by ABAP Proxy Generation|https://service.sap.com/sap/support/notes/1242795]
Regards
Francesco

ABAP Proxy, WEB SERVICE and RFC

Hi
I have to pull the data from XI.
I have the PDFdocument of how to integrate XI with BI.
But i am not clear what is abap proxy and web service.
Could anyone let me know basic of what is abap proxy and webservice.
Is abap proxy and webservice are present in both the systems XI&BI ?
REgards
annie

Hi,
ABAP proxy is a connection between SAP XI & BI . For all the connections need to chk in SM59, and SICF .
proxies are a replacemet for adapters whereas webservices(WSDL) are replacements for data typesYou generate proxies from an interface description in WSDL (Web Service Description Language) by using ABAP proxy generation.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46d6c25d-0b01-0010-06a9-8e8218753c02
The SOAP adapter enables you to exchange SOAP messages between remote clients or Web service servers and the Integration Server. Also you can use the axis framework with SOAP adapter. Check this help:
http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
We can Communicate between SAP System & Webservice Using Proxies. Check this weblog for some information on this:
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
ABAP Proxy -> XI -> Webservice :
pls chk this links;
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
http://www.webservicex.net/WS/WSDetails.aspx?CATID=4&WSID=59
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3022- [original link is broken] [original link is broken] [original link is broken] Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies -ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Hope this helps,
Regards
CSM Reddy

RFC(ABAP Proxy)-------XI-------- FILE Asynch

Hi All,
Good evening.
Please let me clear one thing, the message automatically comes into XI when executing proxy at R/3 side? or we have to send from RWB by using the path
component monitoring-->Proxyruntime----->sendmessage
there we paste the message from SXMB_MONI of R/3?
Please clarify my doubt ASAP.
Thanks & Regards,
Nagarjuna.

Hi
You can test the scenario from SXMB_Moni of R/3.
Or you can call the execute_synchronous method and the whole scenario will work fine.
Please refer below scenarios
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04s/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
Setting Up Point-to-Point Connections with proxy
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
Thanks
Swarup

Abap Proxy Errors

Hi Experts,
My scenario R/3->XI(ABAP Proxy)--->SUS Systems
Getting the following error in SUS system.XI system it doesn't throw any error in moni.
I am new to proxy concepts.Also please let me know any related blogs or suggestions in this regards.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSIV_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Sudhansu

Hi Behera,
Can you debug your proxy using this blog:
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502a7f0e-e5d9-2910-5aa2-976a8ed8384f&overridelayout=true
Also please check few solutions given in this threads for the same issue:
Re: Messages waiting in SUS Moni
Re: ABAP Inbound Proxy Error !
Regards,
---Satish

ABAP Proxy Client?

Hi Experts,
i've gone thru a ABAP Client Proxy scenario which is mention below.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
can anyone elaborate abt this scenario?
i want to know proxy will be generated on XI or on the sender system. if we are creating proxy on XI then how XI message format i.e., (SOAP XML message) is generated and Message interface which is created for Sender will b mapped?
Cheers
Faisal

Hi Faisal,
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Proxy is created on application system .in this example they have taken two clients of XI system. client 100 is configured as XI integration server and client 105 is configuired as sap application system.client 105 is working as Sender system.Actually we can have only one XI integration server on any NW system but we can have various application systems.
For client proxy creation , we first create outbound mesage interfaces in IR and then we go to SPROXY transaction and chose our outbound message interface and create proxy from that interface.
u create a abap report and send message from there.
use these links:
ABAP Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/content.htm
ABAP Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To activate ABAP proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Detailed step-by-step solution for ABAP proxies in XI
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Cheers
Rohit
please reward points if found useful....it would be appreciable...:)
Edited by: Rohit Goel on Jan 30, 2008 7:45 AM

ABAP Proxy to HTTP Synchronous

Similar Messages

Maybe you are looking for