ABAP Query error

Hello! can anyone help pls?
I am in the process of constructing an ABAP query and I'm getting an error message which is quite puzzling. Here's the details:
I'm creating the query using an infoset constructed from logical database VAV. When I try to add field VBUP-GBSTA to my basic list design, I get the following error:
"You placed fields from different parallel branches of the hierarchical data source in the same line. . This makes no sense. The list will not be displayed as you desire. . List is only displayed in simple format for correction purposes. . Please check the sequence. Button allows you to color list fields according to the hierarchy. "
I don't know why this is the case, and I really need to report on that field. Any ideas would be most appreciated!
Thanks in advance!

Hello Elizabeth,
I hope you have selected VBUP also in the hierarchy in the infoset. If this is selected and the field which you are looking for (GBSTA) is assigned to a field group, then u should be able to select this in the basic list.
Hope this helps
Abhijit

Similar Messages

Syntax error in ABAP Query

Hi All,
We are facing syntax erro with ABAP query.
We have a infoset/query which is perfectly working in one system and we downloaded the both infoset and query from this system.But the same query when it is uploaded to other system is not working.
Infoset is not giving any syntax error while activation. Morever, the generated report struture is also different from the other system. In old system, report was having one include for declaration and other for data retrieval process etc.
Can you please help us to resolve this issue?
Thanks

Hi,
The query generated is based on the table structures available as they are used, etc.
So please check if there is any difference in the fields available in the tables used, LDB used if any.
In addition, may be few of the properties of the SAP query and info set does not get copied properly.
and after activating the info set only, activate the query, etc...check them once again.
Regards,
Santhosh.

Error When Run ABAP Query in Different Client

Hi ABAPers,
Currently I develop ABAP Query using SQ01 / SQ02 / SQ03.
Everything goes well, and I have already test that the query work well. The query can be execute and show the result correctly.
My peer in same SAP system, but different client, run the same query. As I know that query is same with ABAP program which is client independent, can be execute across client. But then the runtime error show up.
The error said that
Exception condition "NO_POSITION_FOUND" raised.
Can anybody told me what's happened here, and how can I resolve this problem?
Thank you in advance
Regards
Hadi

Hi,
Since you are testing it in other client,i think due to data inconsistency you are getting that error.
Try to check the corresponding tables in both clients and can verify.
Cheers,
KK.

ABAP Query ... syntax error ...... short dump

Hi,
I am getting dump when executing ABAP Query..
Error in the ABAP Application Program
The current ABAP program "AQL4LA==========ZTST_DATA=====" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWB/SAPLIQ000000000486 " in
include "/1BCDWB/LIQ000000000486$04 " in
line 5:
"A FUNCTION already exists with the name "/1BCDWB/IQ000000000486SSCR"."
Any help ?
Giri

Hello,
Please refer to SAP note 723577 and implement the recommendations within and regenerate the query.
Hope this helps.
Regards,
David

ABAP query issue when logoff error message query not created

Hi All ,
I created a ABAP query using SQ01 . I saved it and i'm able to see the output . But , if i logoff from the system and relogin again to system and trying to execute the query , it is showing an error message
" The query has not been created " Please help me , is there any settings change or i have to do any thing else ?
Thanks & Regards ,
Sabu

Hi ,
Yes you are right , when i try that way i can see , is it the correct solution ?
i have one more issue , i created the query , i can display and execute the query , but no one in the same system able to display or execute the query . What should i do .
Thanks & Regards ,
Sabu.

When executing a query showing as ABAP runtime error RAISE_EXCEPTION

Hi all,
When i executed a query, it is showing as ABAP runtime error RAISE_EXCEPTION in the short dump.
This is the Analysis in Short dump (ST22)...............
Exception condition "DATE_BEFORE_RANGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLSCAL" raised the exception
condition "DATE_BEFORE_RANGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Date is earlier than factory calendar definition
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLSCAL" or "LSCALU06"
"DATE_CONVERT_TO_FACTORYDATE"
or
"SAPLSCAL" "DATE_BEFORE_RANGE"
or
"WRITEQUERY " "DATE_BEFORE_RANGE"
Could you pls any one tell me what could be the problem and how to reslove this issue.
Thanks & Regards,
Ravi Kumar.

Hi Andre,
Maintain your factory calendar idents Valid To year field (BJAHR) in Table TFACD
You can do this via tcode SCAL, or navigate through SPRO.
Most likely you have your factory calendars set with Valid To dates as 2010. You may also be encountering some load issues depending on exit routines used in transformations in determining workdays/factory days etc.
Thanks,
Eric Filmer

ABAP Query variant - Error during SE93

Team,
I am creating ztransaction codes for abap queries via SE93. Sometimes in SE93 error comes stating that Variant is required. I want to know the table name where this info/indicator/flag is maintained.
I need this info to automate my BDC.
Thanks
Error Msg:
Report AQ10CR==========35============ can only be started with a variant
Message no. DB623

Hi,
Check in SQ01, there are options to set the ABAP query to be executed with varaint. If this check box is enabled then you can execute the query only with a varaint. So i believe its the setting in the query definition and not in Se93.
Btw you can define or create a transaction code in SE93 to run a query with the varaint as well.
Let me know if you need more info.
cheers
VJ

Getting error while assigning ABAP Query to Tr.Code

Hi Guys,
There is a problem iam facing with ABAP query while transporting which need to solved asap. It will very greatfull if u guys can resolve this problem.
My problem is, I created one ABAP Query with Name ASSETOVERVIEW. I had transported this even, now when iam going to assign it to one transaction code with se93 lets say ZAOR. I need to give its description and program name in se93 right. now my question is what is program name i need to give in se93. Bcoz in SQ01 where i created the query, there is no name as 'program name' rather there is 'Name' in that we will create the query name i.e, ASSETOVERVIEW. In se93 u give tr.code and when u see down there will be radiobuttons in 'start object',in that i had checked program and selection screen (report transaction) is this right button i had checked or any other i need to check?. I had assigned this name i.e,ASSETOVERVIEW and development class and then when i check the name for syntax check its giving "'ASSETOVERVIEW' does not exist". I don't understand what program name i need to give.
If u guys can help me out with this problem it will be very much appreciable and definetly can get the reward points.
Thanks for as usual help in advance.
Regards.

Hi omer,
1. Just run the query.
2. one selection screen will come
3. then using SYSTEM---->STATUS, (from menu)
look for the program name
4. the program name will be something wired foramt.
/asdfasdf/asdfdas etc.
5. Give that name in se93.
regards,
amit m.

Error in abap query sq03,02,01(to get data from structure) it is possible?

hi
experts,
i am developing a report using abap query .(stand t code is s_alr_87012277 it contain more fields but i want only 4 fields , i found 2 but remaining 2 are from structure)
my problem is that debit and credit amount is in structure
how i can get data from structure(FAGL_S_RFSSLD00_LIST )
solbm = debit.
habbm = credit.
report is like
op.
gl acc no, discription, credit amount,debit amount.

Hi ajay,
try to use with logical database SDF.
assign the logical database name in info set.
gl acc no    -               SKA1-SAKNR
debit.         -     Field: um02h
credit.        -     field: um02s
discription -               SKAT-TXT20
regards,
sateesh.

Wrong sequence in selection screen generated by ABAP Query

Hi,
I am developing a query to display the data in the view.
My query has 8 selection fields totally.
As part of my requirement I have added selection parameter in the
selections tab of the infoset and maintained the sequence as 9.
Inspite of maintaining the sequence number as 9 in the infoset, It is
appearing first in the selection screen of the query.
I tried putting different numbers in the sequence number, but even it
is appearing first in the selection screen.
Can you please let me know how to display the selections declared in
the infoset as per the sequence required.
Thanks,
Madhuri.

Actually what happen when you declare your own fields in ABAP query . you have to care about the sequence . As an example if youre selecting lets say state name , you have two variables
1-state
2- land
for state you have to select land first , if your state is first and land is 2nd it gave you the error of sequence .
Because you have to get data in land first in order to get state specific to the land .
it should be
1-Land
2-State
Just see the your fields , Im sure youre missing that .
You can also see the NO ( field ) in Query ( Sq03 ) . where you can define the seqence on selection.
hope thisll help you .
Pl...Award the points .
Thanks
Saquib
Message was edited by: Saquib Khan

PNPCE in ABAP Query(SQ01) Selection is not working completely

Hi All,
I have developed an ABAP query using LDB PNPCE. I am reading data from IT000,IT0001 etc . I test the query in QA and I noticed that the PNCPCE screen doesnt care about the selection in query. Like I have given the date range in PNCPE default screen. But its not filtering that data at all. It pulling up the employees regardless of date, it behaves the same for field action type (P0000-MASSn). The surprising thing is that for company code its working fine. My question is that Why PNPCE standard screen-selection not filtering data in ABAP query.
Did any one of you also experience that?
FYI
I also find an OSS note # 730005 but we are already on 52 Patch !!
OSS note :PNPCE: Incorrect data of infotype 0000 and 0001
Symptom
When you carry out a reprot which is based on logical database PNPCE, errors occur during the processing of infotypes 0000 and 0001.
Other terms
PNPCE, AS PERSON, P0000, P0001, data selection period, person selection period, CHECK_IT_0000_DATA_RESTRICTED, CHECK_IT_0001_DATA_RESTRICTED
Reason and Prerequisites
You start a report which is based on logical database PNPCE. In the report, infotype 0000 or 0001 is processed (that is, it was declared via the INFOTYPES statement). At event 'GET GROUP' or 'GET PERAS', the system either returns too few data records in the infotype tables or it returns data records twice.
The error (missing data records) has only occured since the implementation of Note 687004 or the import of Support Package SAPKE47028.
Solution
Implement the attached corrections. or import the corresponding Support Package.
Thanks,
Saquib Khan

Hi Saquib,
Recently i am facing the same issue can u pls do reply how you have overcome this issue..The data is not getting picked up at the right time it is lately picked up by the program . Earlier it was PNP and it has been changed to PNPCE also we had implemented OSS Note 687004 and the later's Notes were also implemented but still now we are unable to track down why there is delay in picking up the records this has been happening for the past 8-10 Months(i m not sure far more before). I am finding 2 main issues,
1. we are using GET peras in PNPCE and no other event after that may be this is not fetching all the data because my selection screen does contain PERSONID where i suppose there should be GET PERSON event to define it
2. RP_READ_INFOTYPE macro while using for P0000 ,, the code in the macro is such that it fetches using P0001 also ...I suppose if there are any inconsistency between IT0 and IT1 then this might one to take care ...
kindly let me know how you have approached to resolve this issue.

PNPCE in ABAP Query !!! Slection is not working completely

Hi
I have developed an ABAP query using LDB PNPCE. I am reading data from IT000,IT0001 etc . I test the query in QA and I noticed that the PNCPCE screen doesnt care about the selection in query. Like I have given the date range in PNCPE default screen. But its not filtering that data at all. It pulling up the employees regardless of date, it behaves the same for field action type (P0000-MASSn). The surprising thing is that for company code its working fine. My question is that Why PNPCE standard screen-selection not filtering data in ABAP query.
Did any one of you also experience that?

FYI
I also find an OSS note # 730005 but we are already on 52 Patch !!
OSS note :PNPCE: Incorrect data of infotype 0000 and 0001
Symptom
When you carry out a reprot which is based on logical database PNPCE, errors occur during the processing of infotypes 0000 and 0001.
Other terms
PNPCE, AS PERSON, P0000, P0001, data selection period, person selection period, CHECK_IT_0000_DATA_RESTRICTED, CHECK_IT_0001_DATA_RESTRICTED
Reason and Prerequisites
You start a report which is based on logical database PNPCE. In the report, infotype 0000 or 0001 is processed (that is, it was declared via the INFOTYPES statement). At event 'GET GROUP' or 'GET PERAS', the system either returns too few data records in the infotype tables or it returns data records twice.
The error (missing data records) has only occured since the implementation of Note 687004 or the import of Support Package SAPKE47028.
Solution
Implement the attached corrections. or import the corresponding Support Package.
Thanks
Saquib Khan

Hi Saquib,
Recently i am facing the same issue can u pls do reply how you have overcome this issue..The data is not getting picked up at the right time it is lately picked up by the program . Earlier it was PNP and it has been changed to PNPCE also we had implemented OSS Note 687004 and the later's Notes were also implemented but still now we are unable to track down why there is delay in picking up the records this has been happening for the past 8-10 Months(i m not sure far more before). I am finding 2 main issues,
1. we are using GET peras in PNPCE and no other event after that may be this is not fetching all the data because my selection screen does contain PERSONID where i suppose there should be GET PERSON event to define it
2. RP_READ_INFOTYPE macro while using for P0000 ,, the code in the macro is such that it fetches using P0001 also ...I suppose if there are any inconsistency between IT0 and IT1 then this might one to take care ...
kindly let me know how you have approached to resolve this issue.

ABAP Query Layout not proper

Hi experts,
I am facing a problem regarding the output display of ABAP Query that I have created using SAP List Viewer.
I have used logical database VFV in the query and some selection fields and some additional fields also.
The output is shown to me as a list output rather than an ALV output.
Please suggest a solution so that I can display the output in ALV format and not List format.
Regards,
Garima.

Hi,
I have got the error removed by ensuring that fields from one table are a part of one line ( taking help of ruler) only. But the underlying problem remains, the output is not ALV but List output.
I do not think having additional fields in the query is reason for this.
Is it bcoz iI am adjusting the output length of columns to ensure no hierarchical error ?
Can we not have a query using LDB which is shown as SAP List?
Regards,
Garima.

Unable to access Archived data with an ABAP Query

I have an ABAP Query that uses Logical Database KDF (Vendor) for reporting.
KDF is Archive Enabled and I can access archived document via SAP standard programs that used the KDF Logical Database.
the query appears accessing the data but nothing shows on the report.
Has anyone successfully written and ABAP query and included access to the Archived data?
Any help is appreciated.

Hi Gena,
I'm facing exactly the same problem as you...
Since this post is an old one, I imagine that you may not remember, but I have to try...
Have you solved it? If yes, could you please tell me how?
I've tried to use CL_ABAP_GZIP and CL_ABAP_UNGZIP_BINARY_STREAM and I'm getting the same error 30 at the IctDecompressStream function.
Tks in advance,
Flavio.

Validate plants selected in Abap Query selection screen

Hi Everyone,
I have a requirement wherein i have to validate 'authority check' for the plants populated in the selection screen in an already created abap query.
I tried adding code in the code section. But i dont know how to use the select-option parameter. It already exists(VBAP-WERKS) in the table which is used for join, so i cannot add it in the additional fields. Am i correct ?
Also, i saw that the report program for this query uses this parameter sa SP$00008. I tried using it but it gives an error The IN operator with "SP$00008" is followed neither by an internal table nor by a value list.
Please help.
Also, please advice whether this requirement can be catered in this query alone? or should i go with writing a new report program for this? ( i personally feel that this would beat the purpose of using Abap Query. )
Regards,
Tarun

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

ABAP Query error

Similar Messages

Maybe you are looking for