ABAP report columns
Hi,
My ABAP report columns appear on two rows instead of one. I would like to keep the columns in one row with a horizontal scroll bar.
How do I achieve that?
Thanks,
~Mark
Hi,
Please check your report attributes
report ytest message-id yatt
no standard page heading
line-size 170
line-count 65.
a®
Similar Messages
-
Serious Performance Problems in ABAP Reports
Hi All,
We are developing ABAP reports for SAP IS-U/CCS Modules and facing Performance issues.Whole scenario is given below.Please suggest some solution.
1. Total No. Of Business Partners = 1500000
2. Reports Selection Criteria are of two types:
a) GSBER(Business Area) - Selection for atleast 200000 Business Partners
b) Cokey(Division) - Selection for around 1000 to 50000 Business Partners
3. For implementing our reports logic we have to access several tables all of which are very large.They are :
Table Name No. of records (Appx)
DBERCHV 20000000
DBERCHZ1 20000000
DBERDLB 20000000
DFKKKO 20000000
DFKKOP 20000000
EANLH 4000000
ERCH 10000000
ERCHC 10000000
ETTIFN 30000000
EVER 1500000
FKKVKP 1500000
TECOKT 500
TGSBT 12
4. Due to large no. of records we are facing problems at two levels:
a) OpenSQL Statement is taking too much time for data selection
b) Since large no. of records are selected Corresponding loops and data processing also takes much time
5. We have tried almost all ABAP Performance optimization techniques such as using Index, SQL optimization techniques,Read Table Optimization, Loop Statement Optimization etc. but there is not much improvement.
6. For example one of our Reports "R15" takes around 1500 seconds for 1000 Business Partners.
Its Code is attached below:
<b>a) ZISU_SCHL_LTR15_BAPI - Program which schedules actual R15 report in background</b>
*& Report ZISU_SCHL_LTR15_BAPI *
*& Developed By : Piyusha Kirwai *
*& Date : 02/12/2005 *
*& Purpose : To Schedule the LT R 15 prog in background and store
*& the File for Manual R-15 into server.
REPORT ZISU_SCHL_LTR15_BAPI NO STANDARD PAGE HEADING.
TABLES ZEVERFKKVKP.
DATA: DYFIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE.
DATA: IT_TAB TYPE FILETABLE,
GD_SUBRC TYPE I.
DATA: LV_GSBER TYPE TGSBT-GSBER.
RANGES R_COKEY FOR ZEVERFKKVKP-COKEY.
DATA: BEGIN OF GT_TECOKT OCCURS 100,
COKEY TYPE TECOKT-COKEY,
LTEXT TYPE TECOKT-LTEXT,
END OF GT_TECOKT,
BEGIN OF GT_TE422 OCCURS 100,
TERMSCHL TYPE TE422-TERMSCHL,
TERMTEXT TYPE TE422-TERMTEXT,
END OF GT_TE422.
DATA: BEGIN OF GWA_MANUAL_DATA,
COL_1(5) TYPE C,
COL_2(10) TYPE C,
COL_3(40) TYPE C,
COL_4(40) TYPE C,
COL_5(10) TYPE C,
COL_6(19) TYPE C,
COL_7(19) TYPE C,
COL_8(19) TYPE C,
COL_9(19) TYPE C,
COL_10(19) TYPE C,
COL_11(19) TYPE C,
COL_12(10) TYPE C,
COL_13(19) TYPE C,
COL_14(19) TYPE C,
COL_15(19) TYPE C,
COL_16(19) TYPE C,
COL_17(19) TYPE C,
COL_18(19) TYPE C,
END OF GWA_MANUAL_DATA,
GT_MANUAL_DATA LIKE GWA_MANUAL_DATA OCCURS 0,
GT_INTERN_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*&-----FOR UPLOADING FILE TO SERVER------------------------------------*
DATA: LV_SERVER_FILE_PREFIX(60) TYPE C.
DATA: LV_SERVER_DATAFILE_NAME(60) TYPE C.
DATA: LV_SERVER_ERRFILE_NAME(60) TYPE C.
DATA: ENDT LIKE SY-UZEIT,
ENDD LIKE SY-DATUM,
JOBCOUNT TYPE TBTCJOB-JOBCOUNT.
SELECTION-SCREEN BEGIN OF BLOCK 001 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: SO_GSBER FOR ZEVERFKKVKP-GSBER OBLIGATORY,
SO_COKEY FOR ZEVERFKKVKP-COKEY OBLIGATORY,
SO_MRU FOR ZEVERFKKVKP-ABLEINH.
PARAMETERS: P_BMNTH(7) TYPE C OBLIGATORY.
SELECT-OPTIONS: SO_GPART FOR ZEVERFKKVKP-GPART.
SELECTION-SCREEN END OF BLOCK 001.
SELECTION-SCREEN BEGIN OF BLOCK 002 WITH FRAME TITLE TEXT-003.
PARAMETERS: P_COMPUT RADIOBUTTON GROUP R15,
P_INCLUD RADIOBUTTON GROUP R15,
P_FILE TYPE RLGRAP-FILENAME MODIF ID ACT.
SELECTION-SCREEN END OF BLOCK 002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(83) TEXT-004.
SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
* SELECTION-SCREEN COMMENT 8(40) TEXT-005.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK 003 WITH FRAME TITLE TEXT-002.
PARAMETERS P_SCHL TYPE C AS CHECKBOX.
PARAMETERS : P_IMMED RADIOBUTTON GROUP SCH ,
P_DT_TM RADIOBUTTON GROUP SCH,
P_DATE TYPE SY-DATUM MODIF ID SHL,
P_TIME TYPE SY-UZEIT MODIF ID SHL.
SELECTION-SCREEN END OF BLOCK 003.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN ON SO_GSBER.
IF NOT SO_GSBER-LOW IS INITIAL.
SELECT SINGLE GSBER FROM TGSBT INTO LV_GSBER
WHERE GSBER = SO_GSBER-LOW.
IF SY-SUBRC <> 0.
MESSAGE E007(ZISU).
ENDIF.
ENDIF.
IF NOT SO_GSBER-HIGH IS INITIAL .
SELECT SINGLE GSBER FROM TGSBT INTO LV_GSBER
WHERE GSBER = SO_GSBER-HIGH.
IF SY-SUBRC <> 0.
MESSAGE E007(ZISU).
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON P_BMNTH.
**check the validity of Billing month format and for valid billing month
IF P_BMNTH CO '0123456789/'.
IF P_BMNTH CP '++++/++'.
IF P_BMNTH+5(2) > 12.
MESSAGE E002(ZISU) WITH 'from'.
ENDIF.
** current year is less than year entered
IF SY-DATUM(4) < P_BMNTH(4).
MESSAGE E003(ZISU) WITH 'from'.
ELSEIF SY-DATUM(4) = P_BMNTH(4).
** month in future
IF SY-DATUM+4(2) < P_BMNTH+5(2).
MESSAGE E004(ZISU) WITH 'from'.
ENDIF.
ENDIF.
ELSE.
MESSAGE E001(ZISU) WITH 'from'.
ENDIF.
ELSE.
** entry have some invalid char
MESSAGE E010(ZISU).
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SO_COKEY-LOW.
**for geting the CO account assigment key of the entered Business area
CLEAR: DYFIELDS[], DYFIELDS.
PERFORM DIVISON_DATA_GET CHANGING SO_COKEY-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SO_COKEY-HIGH.
**for geting the CO account assigment key of the entered Business area
CLEAR: DYFIELDS[], DYFIELDS.
PERFORM DIVISON_DATA_GET CHANGING SO_COKEY-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SO_MRU-LOW.
CLEAR: DYFIELDS[], DYFIELDS.
PERFORM MRU_DATA_GET CHANGING SO_MRU-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SO_MRU-HIGH.
CLEAR: DYFIELDS[], DYFIELDS.
PERFORM MRU_DATA_GET CHANGING SO_MRU-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
REFRESH: IT_TAB.
**Opens File Open Dialog Box for selecting input file.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Select File'
DEFAULT_FILENAME = '*.xls'
MULTISELECTION = ' '
CHANGING
FILE_TABLE = IT_TAB
RC = GD_SUBRC.
LOOP AT IT_TAB INTO P_FILE.
* so_fpath-sign = 'I'.
* so_fpath-option = 'EQ'.
* append so_fpath.
ENDLOOP.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ACT'.
IF P_INCLUD = ' '.
SCREEN-INPUT = '0'.
ELSE.
SCREEN-INPUT = '1'.
ENDIF.
ENDIF.
IF SCREEN-GROUP1 = 'SHL'.
IF P_DT_TM = 'X'.
SCREEN-INPUT = '1'.
ELSE.
SCREEN-INPUT = '0'.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
INITIALIZATION.
P_DATE = SY-DATUM.
P_TIME = SY-UZEIT + 180.
START-OF-SELECTION.
IF P_INCLUD = 'X' AND P_FILE IS INITIAL.
MESSAGE 'Enter the Manual R-15 File' TYPE 'E'.
ENDIF.
* IF P_INCLUD = 'X'.
* PERFORM UPLOAD_EXCEL_FILE.
* CONCATENATE 'R15' SY-DATUM '-' SY-UZEIT INTO LV_SERVER_FILE_PREFIX.
* CONCATENATE LV_SERVER_FILE_PREFIX '-' 'LT.TMP' INTO
* LV_SERVER_DATAFILE_NAME.
* OPEN DATASET LV_SERVER_DATAFILE_NAME
* FOR OUTPUT
* IN TEXT MODE
* ENCODING DEFAULT.
* LOOP AT GT_MANUAL_DATA INTO GWA_MANUAL_DATA.
* IF ( GWA_MANUAL_DATA-COL_6 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_7 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_8 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_9 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_10 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_11 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_13 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_14 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_15 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_16 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_17 CN '0123456789 '
* AND GWA_MANUAL_DATA-COL_18 CN '0123456789 ' ).
* MESSAGE 'Character Data in Numerical Field' TYPE 'E'.
* ENDIF.
* TRANSFER GWA_MANUAL_DATA TO LV_SERVER_DATAFILE_NAME.
* ENDLOOP.
* CLOSE DATASET LV_SERVER_DATAFILE_NAME.
* ENDIF. " P_INCLUD = 'X'.
IF P_SCHL = 'X'.
IF P_IMMED = 'X'.
CALL FUNCTION 'C14B_ADD_TIME'
EXPORTING
I_STARTTIME = SY-UZEIT
I_STARTDATE = SY-DATUM
I_ADDTIME = '000010'
IMPORTING
E_ENDTIME = ENDT
E_ENDDATE = ENDD.
ELSEIF P_DT_TM = 'X'.
ENDD = P_DATE.
ENDT = P_TIME.
ENDIF.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
* DELANFREP = ' '
* JOBGROUP = ' '
JOBNAME = 'R15JOB'
* SDLSTRTDT = ENDD
* SDLSTRTTM = ENDT
* JOBCLASS =
IMPORTING
JOBCOUNT = JOBCOUNT
* CHANGING
* RET =
* EXCEPTIONS
* CANT_CREATE_JOB = 1
* INVALID_JOB_DATA = 2
* JOBNAME_MISSING = 3
* OTHERS = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_INCLUD = 'X'.
PERFORM UPLOAD_EXCEL_FILE.
CONCATENATE 'R15' SY-DATUM '-' SY-UZEIT INTO LV_SERVER_FILE_PREFIX.
CONCATENATE LV_SERVER_FILE_PREFIX '-' JOBCOUNT 'LT.TMP' INTO
LV_SERVER_DATAFILE_NAME.
CONDENSE LV_SERVER_DATAFILE_NAME.
OPEN DATASET LV_SERVER_DATAFILE_NAME
FOR OUTPUT
IN TEXT MODE
ENCODING DEFAULT.
IF SY-SUBRC NE 0.
MESSAGE 'Error in Creating File on Server' TYPE 'E'.
ENDIF.
LOOP AT GT_MANUAL_DATA INTO GWA_MANUAL_DATA.
IF ( GWA_MANUAL_DATA-COL_6 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_7 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_8 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_9 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_10 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_11 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_13 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_14 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_15 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_16 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_17 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_18 CN '0123456789 ' ).
MESSAGE 'Character Data in Numerical Field' TYPE 'E'.
ENDIF.
TRANSFER GWA_MANUAL_DATA TO LV_SERVER_DATAFILE_NAME.
ENDLOOP.
CLOSE DATASET LV_SERVER_DATAFILE_NAME.
IF SY-SUBRC NE 0.
MESSAGE 'Error in Creating File on Server' TYPE 'E'.
ENDIF.
ENDIF. " P_INCLUD = 'X'.
SUBMIT ZISU_LTR15_TUNE
WITH SO_GSBER IN SO_GSBER
WITH SO_COKEY IN SO_COKEY
WITH SO_MRU IN SO_MRU
WITH SO_GPART IN SO_GPART
WITH P_BMNTH = P_BMNTH
WITH P_COMPUT = P_COMPUT
WITH P_INCLUD = P_INCLUD
WITH P_FILE = LV_SERVER_DATAFILE_NAME
USER SY-UNAME VIA JOB 'R15JOB' NUMBER JOBCOUNT AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
* AT_OPMODE = ' '
* AT_OPMODE_PERIODIC = ' '
* CALENDAR_ID = ' '
* EVENT_ID = ' '
* EVENT_PARAM = ' '
* EVENT_PERIODIC = ' '
JOBCOUNT = JOBCOUNT
JOBNAME = 'R15JOB'
* LASTSTRTDT = NO_DATE
* LASTSTRTTM = NO_TIME
* PRDDAYS = 0
* PRDHOURS = 0
* PRDMINS = 0
* PRDMONTHS = 0
* PRDWEEKS = 0
* PREDJOB_CHECKSTAT = ' '
* PRED_JOBCOUNT = ' '
* PRED_JOBNAME = ' '
SDLSTRTDT = ENDD
SDLSTRTTM = ENDT
* STARTDATE_RESTRICTION = BTC_PROCESS_ALWAYS
STRTIMMED = P_IMMED
* TARGETSYSTEM = ' '
* START_ON_WORKDAY_NOT_BEFORE = SY-DATUM
* START_ON_WORKDAY_NR = 0
* WORKDAY_COUNT_DIRECTION = 0
* RECIPIENT_OBJ =
* TARGETSERVER = ' '
* DONT_RELEASE = ' '
* TARGETGROUP = ' '
* DIRECT_START =
* IMPORTING
* JOB_WAS_RELEASED =
* CHANGING
* RET =
* EXCEPTIONS
* CANT_START_IMMEDIATE = 1
* INVALID_STARTDATE = 2
* JOBNAME_MISSING = 3
* JOB_CLOSE_FAILED = 4
* JOB_NOSTEPS = 5
* JOB_NOTEX = 6
* LOCK_FAILED = 7
* INVALID_TARGET = 8
* OTHERS = 9
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE. " IF NOT TO RUN IN BACKGROUND
IF P_INCLUD = 'X'.
PERFORM UPLOAD_EXCEL_FILE.
CONCATENATE 'R15' SY-DATUM '-' SY-UZEIT INTO LV_SERVER_FILE_PREFIX.
CONCATENATE LV_SERVER_FILE_PREFIX '-' 'LT.TMP' INTO
LV_SERVER_DATAFILE_NAME.
CONDENSE LV_SERVER_DATAFILE_NAME.
OPEN DATASET LV_SERVER_DATAFILE_NAME
FOR OUTPUT
IN TEXT MODE
ENCODING DEFAULT.
IF SY-SUBRC NE 0.
MESSAGE 'Error in Creating File on Server' TYPE 'E'.
ENDIF.
LOOP AT GT_MANUAL_DATA INTO GWA_MANUAL_DATA.
IF ( GWA_MANUAL_DATA-COL_6 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_7 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_8 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_9 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_10 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_11 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_13 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_14 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_15 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_16 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_17 CN '0123456789 '
AND GWA_MANUAL_DATA-COL_18 CN '0123456789 ' ).
MESSAGE 'Character Data in Numerical Field' TYPE 'E'.
ENDIF.
TRANSFER GWA_MANUAL_DATA TO LV_SERVER_DATAFILE_NAME.
ENDLOOP.
CLOSE DATASET LV_SERVER_DATAFILE_NAME.
IF SY-SUBRC NE 0.
MESSAGE 'Error in Creating File on Server' TYPE 'E'.
ENDIF.
ENDIF. " P_INCLUD = 'X'.
IF NOT SY-BATCH IS INITIAL.
SUBMIT ZISU_LTR15_TUNE
WITH SO_GSBER IN SO_GSBER
WITH SO_COKEY IN SO_COKEY
WITH SO_MRU IN SO_MRU
WITH SO_GPART IN SO_GPART
WITH P_BMNTH = P_BMNTH
WITH P_COMPUT = P_COMPUT
WITH P_INCLUD = P_INCLUD
WITH P_FILE = LV_SERVER_DATAFILE_NAME
TO SAP-SPOOL WITHOUT SPOOL DYNPRO.
ELSE.
SUBMIT ZISU_LTR15_TUNE
WITH SO_GSBER IN SO_GSBER
WITH SO_COKEY IN SO_COKEY
WITH SO_MRU IN SO_MRU
WITH SO_GPART IN SO_GPART
WITH P_BMNTH = P_BMNTH
WITH P_COMPUT = P_COMPUT
WITH P_INCLUD = P_INCLUD
WITH P_FILE = LV_SERVER_DATAFILE_NAME.
ENDIF.
ENDIF.
*& Form divison_data_get
* text
* <--P_SO_COKEY_LOW text
FORM DIVISON_DATA_GET CHANGING P_SO_COKEY_LOW.
**to get the search help for division
DATA : LV_LINES TYPE SY-TFILL,
LT_RETURN_TAB LIKE DDSHRETVAL OCCURS 0, " with header line.
LWA_RETURN_TAB LIKE DDSHRETVAL.
DATA: LV_COKEY TYPE ZEVERFKKVKP-COKEY.
**according to the Business area entered]
* break csebdev1.
REFRESH R_COKEY[].
DESCRIBE TABLE SO_GSBER LINES LV_LINES.
** when user has neither pressed the enter key nor selected the values
**using search help
IF LV_LINES = 0.
* loop at so_gsber.
CLEAR R_COKEY.
* if so_gsber-high is initial.
* break csebdev1.
DYFIELDS-FIELDNAME = 'SO_GSBER-LOW'.
APPEND DYFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = DYFIELDS.
* r_cokey-sign = 'I'.
* r_cokey-option = 'CP'.
*r_cokey-low = so_gsber-low+0(2).
CONCATENATE DYFIELDS-FIELDVALUE+0(2) '*' INTO R_COKEY-LOW.
* elseif not so_gsber-high is initial.
DYFIELDS-FIELDNAME = 'SO_GSBER-HIGH'.
APPEND DYFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = DYFIELDS.
IF NOT DYFIELDS-FIELDVALUE IS INITIAL.
CONCATENATE DYFIELDS-FIELDVALUE+0(2) '99999999' INTO R_COKEY-HIGH.
ENDIF.
* endif.
IF NOT R_COKEY-HIGH IS INITIAL.
R_COKEY-SIGN = 'I'.
R_COKEY-OPTION = 'BT'.
ELSEIF R_COKEY-HIGH IS INITIAL.
R_COKEY-SIGN = 'I'.
R_COKEY-OPTION = 'CP'.
ENDIF.
APPEND R_COKEY.
ENDIF.
* endloop.
* APPEND DYFIELDS.
IF LV_LINES > 0.
* break-point.
IF NOT SO_GSBER[] IS INITIAL.
LOOP AT SO_GSBER.
* r_cokey-sign = 'I'.
* r_cokey-option = 'CP'.
*r_cokey-low = so_gsber-low+0(2).
CONCATENATE SO_GSBER-LOW+0(2) '*' INTO R_COKEY-LOW.
IF NOT SO_GSBER-HIGH IS INITIAL.
CONCATENATE SO_GSBER-HIGH+0(2) '99999999' INTO R_COKEY-HIGH.
ENDIF.
IF NOT R_COKEY-HIGH IS INITIAL.
R_COKEY-SIGN = 'I'.
R_COKEY-OPTION = 'BT'.
ELSEIF R_COKEY-HIGH IS INITIAL.
R_COKEY-SIGN = 'I'.
R_COKEY-OPTION = 'CP'.
ENDIF.
APPEND R_COKEY TO R_COKEY.
ENDLOOP.
ENDIF.
ENDIF.
IF NOT R_COKEY[] IS INITIAL.
* break csebdev1.
REFRESH GT_TECOKT[].
SELECT COKEY LTEXT
FROM TECOKT
INTO TABLE GT_TECOKT
WHERE COKEY IN R_COKEY AND SPRAS = 'EN'.
* %_HINTS ORACLE '("TECOKT","TECOKT~1")'.
ENDIF.
**now call the search help
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
RETFIELD = 'COKEY'
* PVALKEY = ' '
* DYNPPROG = ' '
* DYNPNR = ' '
* DYNPROFIELD = ' '
* STEPL = 0
WINDOW_TITLE = 'Division'
VALUE = DYFIELDS-FIELDVALUE
VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
VALUE_TAB = GT_TECOKT
* FIELD_TAB =
RETURN_TAB = LT_RETURN_TAB
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE LT_RETURN_TAB INTO LWA_RETURN_TAB INDEX 1.
LV_COKEY = LWA_RETURN_TAB-FIELDVAL.
*break csebdev1.
ENDFORM. " divison_data_get
*& Form upload_excel_file
* text
* --> p1 text
* <-- p2 text
FORM UPLOAD_EXCEL_FILE .
DATA: LV_INDEX TYPE I.
FIELD-SYMBOLS <VAL> TYPE ANY.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FILE
I_BEGIN_COL = 1
I_BEGIN_ROW = 8
I_END_COL = 18
I_END_ROW = 94
TABLES
INTERN = GT_INTERN_DATA
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF NOT GT_INTERN_DATA[] IS INITIAL.
SORT GT_INTERN_DATA BY ROW COL.
LOOP AT GT_INTERN_DATA.
MOVE GT_INTERN_DATA-COL TO LV_INDEX.
ASSIGN COMPONENT LV_INDEX OF STRUCTURE GWA_MANUAL_DATA TO <VAL>.
MOVE GT_INTERN_DATA-VALUE TO <VAL>.
AT END OF ROW.
APPEND GWA_MANUAL_DATA TO GT_MANUAL_DATA.
CLEAR GWA_MANUAL_DATA.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " upload_excel_file
*& Form MRU_DATA_GET
* text
* <--P_SO_MRU_LOW text
FORM MRU_DATA_GET CHANGING LV_MRU.
**to get the search help for Group
DATA : LV_LINES TYPE SY-TFILL,
LT_RETURN_TAB LIKE DDSHRETVAL OCCURS 0,
LWA_RETURN_TAB LIKE DDSHRETVAL.
* lv_mru_p(3) type c.
RANGES R_MRU FOR EANLH-ABLEINH.
**according to the Business area entered
** break csebdev1.
REFRESH R_MRU[].
DESCRIBE TABLE SO_GSBER LINES LV_LINES.
** when user has neither pressed the enter key nor selected the values
**using search help
IF LV_LINES = 0.
CLEAR R_MRU[].
DYFIELDS-FIELDNAME = 'SO_GSBER-LOW'.
APPEND DYFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = DYFIELDS.
CONCATENATE DYFIELDS-FIELDVALUE+0(2) '*' INTO R_MRU-LOW.
DYFIELDS-FIELDNAME = 'SO_GSBER-HIGH'.
APPEND DYFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = DYFIELDS.
IF NOT DYFIELDS-FIELDVALUE IS INITIAL.
CONCATENATE DYFIELDS-FIELDVALUE+0(2) '99999999' INTO R_MRU-HIGH.
ENDIF.
IF NOT R_MRU-HIGH IS INITIAL.
R_MRU-SIGN = 'I'.
R_MRU-OPTION = 'BT'.
ELSEIF R_MRU-HIGH IS INITIAL.
R_MRU-SIGN = 'I'.
R_MRU-OPTION = 'CP'.
ENDIF.
APPEND R_MRU.
ENDIF. " end lv_lines =0
IF LV_LINES > 0.
IF NOT SO_GSBER[] IS INITIAL.
LOOP AT SO_GSBER.
CONCATENATE SO_GSBER-LOW+0(2) '*' INTO R_MRU-LOW.
IF NOT SO_GSBER-HIGH IS INITIAL.
CONCATENATE SO_GSBER-HIGH+0(2) '99999999' INTO R_MRU-HIGH.
ENDIF.
IF R_MRU-HIGH IS INITIAL.
R_MRU-SIGN = 'I'.
R_MRU-OPTION = 'CP'.
ELSEIF NOT R_MRU-HIGH IS INITIAL.
R_MRU-SIGN = 'I'.
R_MRU-OPTION = 'BT'.
ENDIF.
APPEND R_MRU.
ENDLOOP.
ENDIF. " end so_GSBER[]
ENDIF. " end lv_lines > 0
IF NOT R_MRU[] IS INITIAL.
* break csebdev1.
REFRESH GT_TE422[].
SELECT TERMSCHL TERMTEXT FROM TE422 INTO CORRESPONDING FIELDS OF
TABLE GT_TE422 WHERE TERMSCHL IN R_MRU .
ENDIF.
**now call the search help
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
RETFIELD = 'TERMSCHL'
* PVALKEY = ' '
* DYNPPROG = ' '
* DYNPNR = ' '
* DYNPROFIELD = ' '
* STEPL = 0
WINDOW_TITLE = 'Group'
VALUE = DYFIELDS-FIELDVALUE
VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
VALUE_TAB = GT_TE422
* FIELD_TAB =
RETURN_TAB = LT_RETURN_TAB
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE LT_RETURN_TAB INTO LWA_RETURN_TAB INDEX 1.
LV_MRU = LWA_RETURN_TAB-FIELDVAL.
ENDFORM. " MRU_DATA_GET
<b>b) ZISU_LTR15_TUNE - Actual R15 report</b>
*& Report ZISU_LTR15_TUNE *
REPORT ZISU_LTR15_TUNE NO STANDARD PAGE HEADING MESSAGE-ID ZISU
LINE-SIZE 250 LINE-COUNT 65.
**Tables
TABLES : EVER,
FKKVKP,
EANLH.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION
WITH FRAME TITLE TEXT-001 . "no intervals.
SELECT-OPTIONS: SO_GSBER FOR EVER-GSBER OBLIGATORY,
SO_COKEY FOR EVER-COKEY,
SO_MRU FOR EANLH-ABLEINH.
PARAMETERS: P_BMNTH(7) TYPE C OBLIGATORY.
PARAMETERS: P_CONT TYPE EVER-VERTRAG.
SELECT-OPTIONS: SO_GPART FOR FKKVKP-GPART.
SELECTION-SCREEN END OF BLOCK SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK PROCESS WITH FRAME.
PARAMETERS: P_COMPUT RADIOBUTTON GROUP R15.
PARAMETERS: P_INCLUD RADIOBUTTON GROUP R15,
P_FILE(60) TYPE C.
SELECTION-SCREEN END OF BLOCK PROCESS.
* Start of Type declaration
TYPES: BEGIN OF ST_TB024 ,
IND_SECTOR TYPE TB024-IND_SECTOR,
TEXTLONG TYPE TB024-TEXTLONG,
END OF ST_TB024,
BEGIN OF ST_TECOKT,
COKEY TYPE TECOKT-COKEY,
LTEXT TYPE TECOKT-LTEXT,
END OF ST_TECOKT,
BEGIN OF ST_TGSBT,
GSBER TYPE TGSBT-GSBER,
GTEXT TYPE TGSBT-GTEXT,
END OF ST_TGSBT,
BEGIN OF ST_TE422,
TERMSCHL TYPE TE422-TERMSCHL,
TERMTEXT TYPE TE422-TERMTEXT,
END OF ST_TE422.
* Start of data declaration
DATA: IT_TAB TYPE FILETABLE,
GD_SUBRC TYPE I.
DATA : GT_TB024 TYPE STANDARD TABLE OF ST_TB024 WITH HEADER LINE
INITIAL SIZE 0,
GT_TECOKT TYPE STANDARD TABLE OF ST_TECOKT
WITH HEADER LINE,
GT_TGSBT TYPE SORTED TABLE OF ST_TGSBT
WITH UNIQUE KEY GSBER WITH HEADER LINE,
GT_TE422 TYPE TABLE OF ST_TE422 WITH HEADER LINE INITIAL SIZE 0,
BEGIN OF GWA_EVER,
VKONT TYPE EVER-VKONTO,
ANLAGE TYPE EVER-ANLAGE,
ABRSPERR TYPE EVER-ABRSPERR,
END OF GWA_EVER,
GT_EVER LIKE TABLE OF GWA_EVER INITIAL SIZE 0,
BEGIN OF GWA_EANLH,
ANLAGE TYPE EANLH-ANLAGE,
BRANCHE TYPE EANLH-BRANCHE,
END OF GWA_EANLH,
GT_EANLH LIKE TABLE OF GWA_EANLH INITIAL SIZE 0,
BEGIN OF GWA_FKKVKP,
VKONT TYPE FKKVKP-VKONT,
KTOKL TYPE FKKVKP-KTOKL,
END OF GWA_FKKVKP,
GT_FKKVKP LIKE TABLE OF GWA_FKKVKP INITIAL SIZE 0,
BEGIN OF GWA_EVER_EANLH_FKKVKP,
VKONT TYPE FKKVKP-VKONT,
ANLAGE TYPE EVER-ANLAGE,
ABRSPERR TYPE EVER-ABRSPERR,
BRANCHE TYPE EANLH-BRANCHE,
KTOKL TYPE FKKVKP-KTOKL,
END OF GWA_EVER_EANLH_FKKVKP,
GT_EVER_EANLH_FKKVKP LIKE TABLE OF GWA_EVER_EANLH_FKKVKP
INITIAL SIZE 0,
GT_EVER_EANLH_FKKVKP_INACT LIKE STANDARD TABLE OF
GWA_EVER_EANLH_FKKVKP INITIAL SIZE 0,
BEGIN OF GWA_ERCH,
BELNR TYPE ERCH-BELNR,
VKONT TYPE ERCH-VKONT,
END OF GWA_ERCH,
GT_ERCH LIKE TABLE OF GWA_ERCH INITIAL SIZE 0,
BEGIN OF GWA_PRINTDOC,
OPBEL TYPE ERDK-OPBEL,
GPART TYPE ERDK-PARTNER,
VKONT TYPE ERDK-VKONT,
BUDAT TYPE ERDK-BUDAT,
FAEDN TYPE ERDK-FAEDN,
END OF GWA_PRINTDOC,
GT_PRINTDOC LIKE TABLE OF GWA_PRINTDOC INITIAL SIZE 0,
BEGIN OF GWA_DBERCHZ1,
BELNR TYPE DBERCHZ1-BELNR,
EIN01 TYPE DBERCHZ1-EIN01,
V_ABRMENGE TYPE DBERCHZ1-V_ABRMENGE,
END OF GWA_DBERCHZ1,
GT_DBERCHZ1 LIKE TABLE OF GWA_DBERCHZ1 INITIAL SIZE 0,
BEGIN OF GWA_ERCHC,
BELNR TYPE ERCHC-BELNR,
OPBEL TYPE ERCHC-OPBEL,
BUDAT TYPE ERCHC-BUDAT,
END OF GWA_ERCHC,
GT_ERCHC LIKE TABLE OF GWA_ERCHC INITIAL SIZE 0,
* arrears for inactive consumers.
BEGIN OF GWA_DFKKOP_INACTIVE_ARR,
OPBEL TYPE DFKKOP-OPBEL,
VKONT TYPE DFKKOP-VKONT,
BETRH TYPE DFKKOP-BETRH,
END OF GWA_DFKKOP_INACTIVE_ARR,
GT_DFKKOP_INACTIVE_ARR LIKE TABLE OF GWA_DFKKOP_INACTIVE_ARR
INITIAL SIZE 0,
BEGIN OF GWA_ETTIFN,
ANLAGE TYPE ETTIFN-ANLAGE,
OPERAND TYPE ETTIFN-OPERAND,
WERT1 TYPE ETTIFN-WERT1,
END OF GWA_ETTIFN,
GT_ETTIFN LIKE SORTED TABLE OF GWA_ETTIFN
WITH NON-UNIQUE KEY ANLAGE OPERAND INITIAL SIZE 0,
BEGIN OF GWA_DBERDLB,
PRINTDOC TYPE DBERDLB-PRINTDOC,
BILLDOC TYPE DBERDLB-BILLDOC,
BILLDOCLINE TYPE DBERDLB-BILLDOCLINE,
NETTOBTR TYPE DBERDLB-NETTOBTR,
END OF GWA_DBERDLB,
GT_DBERDLB LIKE TABLE OF GWA_DBERDLB INITIAL SIZE 0,
BEGIN OF GWA_DBERCHZ1_BILL,
BELNR TYPE DBERCHZ1-BELNR,
BELZEILE TYPE DBERCHZ1-BELZEILE,
TVORG TYPE DBERCHZ1-TVORG,
END OF GWA_DBERCHZ1_BILL,
GT_DBERCHZ1_BILL LIKE TABLE OF GWA_DBERCHZ1_BILL INITIAL SIZE 0,
BEGIN OF GWA_BILLDOC,
PRINTDOC TYPE ERDK-OPBEL,
BILLDOC TYPE DBERDLB-BILLDOC,
END OF GWA_BILLDOC,
GT_BILLDOC LIKE TABLE OF GWA_BILLDOC INITIAL SIZE 0,
BEGIN OF GWA_DBERCHV,
BELNR TYPE DBERCHV-BELNR,
OPERAND TYPE DBERCHV-OPERAND,
EZ_ABRMENGE TYPE DBERCHV-EZ_ABRMENGE,
ABLESGR TYPE DBERCHV-ABLESGR,
ABLESGRV TYPE DBERCHV-ABLESGRV,
END OF GWA_DBERCHV,
GT_DBERCHV LIKE TABLE OF GWA_DBERCHV INITIAL SIZE 0,
BEGIN OF GWA_DFKKOP_ARREAR,
OPBEL TYPE DFKKOP-OPBEL,
VKONT TYPE DFKKOP-VKONT,
HVORG TYPE DFKKOP-HVORG,
TVORG TYPE DFKKOP-TVORG,
BUDAT TYPE DFKKOP-BUDAT,
BETRH TYPE DFKKOP-BETRH,
AUGDT TYPE DFKKOP-AUGDT,
XBLNR TYPE DFKKOP-XBLNR,
END OF GWA_DFKKOP_ARREAR,
GT_DFKKOP_ARREAR LIKE TABLE OF GWA_DFKKOP_ARREAR INITIAL SIZE 0,
BEGIN OF GWA_MASTER_DATA,
SLNO(4) TYPE C,
IND_SECTOR TYPE TB024-IND_SECTOR,
TEXTLONG TYPE TB024-TEXTLONG,
AC_CODE TYPE TFK033D-FUN01,
END OF GWA_MASTER_DATA,
GT_MASTER_DATA LIKE TABLE OF GWA_MASTER_DATA INITIAL SIZE 0,
** internal table for final prepared data
BEGIN OF GWA_FINAL_DATA,
SLNO(4) TYPE C,
IND_SECTOR TYPE TB024-IND_SECTOR, " for testing
INDUSTRY TYPE TB024-TEXTLONG,
AC_CODE TYPE TFK033D-FUN01,
* *for urban partners
UPARTNER TYPE I , "(6) type n,
UBAD_METER TYPE I, "(4) type n,
UINACTIVE TYPE I,
ULOAD(8) TYPE P DECIMALS 2,
UUNITS(8) TYPE P DECIMALS 2,
UDEMANDS(8) TYPE P DECIMALS 2,
UARREARS(8) TYPE P DECIMALS 2, "FKKMAKO-Msalm,
UINACT_ARR(8) TYPE P DECIMALS 2,
BLANK(10) TYPE C,
* *for rural partners
RPARTNER TYPE I , "(6) type n,
RBAD_METER TYPE I , "(4) type n,
RINACTIVE TYPE I,
RLOAD(8) TYPE P DECIMALS 2,
RUNITS(8) TYPE P DECIMALS 2,
RDEMANDS(8) TYPE P DECIMALS 2,
RARREARS(8) TYPE P DECIMALS 2,
RINACT_ARR(8) TYPE P DECIMALS 2,
END OF GWA_FINAL_DATA,
GT_FINAL_DATA LIKE TABLE OF GWA_FINAL_DATA INITIAL SIZE 0,
BEGIN OF GWA_MANUAL_DATA,
COL_1(5) TYPE C,
COL_2(10) TYPE C,
COL_3(40) TYPE C,
COL_4(40) TYPE C,
COL_5(10) TYPE C,
COL_6(19) TYPE C,
COL_7(19) TYPE C,
COL_8(19) TYPE C,
COL_9(19) TYPE C,
COL_10(19) TYPE C,
COL_11(19) TYPE C,
COL_12(10) TYPE C,
COL_13(19) TYPE C,
COL_14(19) TYPE C,
COL_15(19) TYPE C,
COL_16(19) TYPE C,
COL_17(19) TYPE C,
COL_18(19) TYPE C,
END OF GWA_MANUAL_DATA,
GT_MANUAL_DATA LIKE TABLE OF GWA_MANUAL_DATA INITIAL SIZE 0.
** Variables for grand total of all heads.
DATA : GV_T_UPART TYPE I,
GV_T_RPART TYPE I,
GV_T_RINACTIVE TYPE I,
GV_T_UINACTIVE TYPE I,
GV_UDEF_MTR TYPE I,
GV_RDEF_MTR TYPE I,
GV_UCON_LOAD(16) TYPE P DECIMALS 2,
GV_RCON_LOAD(16) TYPE P DECIMALS 2,
GV_UUNITS(16) TYPE P DECIMALS 2,
GV_RUNITS(16) TYPE P DECIMALS 2,
GV_UDEMAND(16) TYPE P DECIMALS 2,
GV_RDEMAND(16) TYPE P DECIMALS 2,
GV_UARREAR(16) TYPE P DECIMALS 2,
GV_RARREAR(16) TYPE P DECIMALS 2,
GV_UINACT_ARR(16) TYPE P DECIMALS 2,
GV_RINACT_ARR(16) TYPE P DECIMALS 2,
GV_U_SD_DMD(16) TYPE P DECIMALS 2,
GV_R_SD_DMD(16) TYPE P DECIMALS 2,
GV_U_SD_ARR(16) TYPE P DECIMALS 2,
GV_R_SD_ARR(16) TYPE P DECIMALS 2,
GV_UR_PART TYPE I,
GV_UR_DEF_MTR TYPE I,
GV_UR_CON_LOAD(16) TYPE P DECIMALS 2,
GV_UR_UNITS(16) TYPE P DECIMALS 2,
GV_UR_DEMAND(16) TYPE P DECIMALS 2,
GV_UR_ARREARS(16) TYPE P DECIMALS 2,
GV_LOWDATE TYPE SY-DATUM,
GV_HIGHDATE TYPE SY-DATUM,
GV_YEAR LIKE DBERCHV-EZ_ABRMENGE,
GV_MONTH LIKE DBERCHZ1-V_ABRMENGE,
GV_MNTH_NAME TYPE T247-KTX.
DATA:
**total meter rent
GV_UTOTMETERRENT TYPE P LENGTH 16 DECIMALS 2,
GV_RTOTMETERRENT TYPE P LENGTH 16 DECIMALS 2,
**for total surcharge
GV_UTOTSURCHRG TYPE P LENGTH 16 DECIMALS 2, "dberdlb-nettobtr,
GV_RTOTSURCHRG TYPE P LENGTH 16 DECIMALS 2, "dberdlb-nettobtr,
**for total ED
GV_UTOTED TYPE P LENGTH 16 DECIMALS 2, "dberdlb-nettobtr,
GV_RTOTED TYPE P LENGTH 16 DECIMALS 2, "dberdlb-nettobtr,
**for total ED Cess
GV_UTOTEDCESS TYPE P LENGTH 16 DECIMALS 2, "dberdlb-nettobtr,
GV_RTOTEDCESS TYPE P LENGTH 16 DECIMALS 2, "dberdlb-nettobtr,
**for total other misc rev
GV_UTOTMISCREV TYPE P LENGTH 16 DECIMALS 2,
GV_RTOTMISCREV TYPE P LENGTH 16 DECIMALS 2,
**for total ED of Free agricultural pump
GV_RTOTEDAGRI TYPE P LENGTH 16 DECIMALS 2,
GV_UTOTEDAGRI TYPE P LENGTH 16 DECIMALS 2,
**for ED cess of Free agriculture pump
GV_RTOTCESSAGRI TYPE P LENGTH 16 DECIMALS 2,
GV_UTOTCESSAGRI TYPE P LENGTH 16 DECIMALS 2,
***data for selection screen data validation
GV_GSBER TYPE EVER-GSBER,
GV_COKEY TYPE EVER-COKEY,
DYFIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
GT_INTERN_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
RANGES: R_COKEY FOR TECOKT-COKEY.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN ON SO_GSBER.
IF NOT SO_GSBER-LOW IS INITIAL.
SELECT SINGLE GSBER FROM TGSBT INTO GT_TGSBT-GSBER WHERE
GSBER = SO_GSBER-LOW.
IF SY-SUBRC <> 0.
MESSAGE E007.
ENDIF.
ENDIF.
IF NOT SO_GSBER-HIGH IS INITIAL .
SELECT SINGLE GSBER FROM TGSBT INTO GT_TGSBT-GSBER WHERE
GSBER = SO_GSBER-HIGH.
IF SY-SUBRC <> 0.
MESSAGE E007.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON P_BMNTH.
**check the validity of Billing month format and for valid billing month
IF P_BMNTH CO '0123456789/'.
IF P_BMNTH CP '++++/++'.
IF P_BMNTH+5(2) > 12.
MESSAGE E002 WITH 'from'.
ENDIF.
** current year is less than year entered
IF SY-DATUM(4) < P_BMNTH(4).
MESSAGE E003 WITH 'from'.
ELSEIF SY-DATUM(4) = P_BMNTH(4).
** month in future
IF SY-DATUM+4(2) < P_BMNTH+5(2).
MESSAGE E004 WITH 'from'.
ENDIF.
ENDIF.
ELSE.
MESSAGE E001 WITH 'from'.
ENDIF.
ELSE.
** entry have some invalid char
MESSAGE E010.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SO_COKEY-LOW.
**for geting the CO account assigment key of the entered Business area
CLEAR: DYFIELDS[], DYFIELDS.
PERFORM DIVISON_DATA_GET CHANGING SO_COKEY-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SO_COKEY-HIGH.
CLEAR: DYFIELDS[], DYFIELDS.
PERFORM DIVISON_DATA_GET CHANGING SO_COKEY-HIGH.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
* REFRESH: IT_TAB.
***Opens File Open Dialog Box for selecting input file.
* CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
* EXPORTING
* WINDOW_TITLE = 'Select File'
* DEFAULT_FILENAME = '*.xls'
* MULTISELECTION = ' '
* CHANGING
* FILE_TABLE = IT_TAB
* RC = GD_SUBRC.
* LOOP AT IT_TAB INTO P_FILE.
** so_fpath-sign = 'I'.
** so_fpath-option = 'EQ'.
** append so_fpath.
* ENDLOOP.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ACT'.
IF P_INCLUD = ' '.
SCREEN-INPUT = '0'.
ELSE.
SCREEN-INPUT = '1'.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
* End of Selection screen processing
TOP-OF-PAGE.
DATA : LV_TEXT(70) TYPE C.
FORMAT INTENSIFIED OFF.
WRITE:/50 'CHHATTISGARH STATE ELECTRICITY BOARD',
/42 'R-15 REPORT FOR LT CONSUMERS FOR THE MONTH OF',
GV_MNTH_NAME NO-GAP,'-' NO-GAP, P_BMNTH(4) NO-GAP,
180 'PAGE-NO. -', SY-PAGNO LEFT-JUSTIFIED.
SKIP.
WRITE:/2 'RAO', 15 ':'.
LOOP AT GT_TGSBT WHERE GSBER IN SO_GSBER.
IF STRLEN( LV_TEXT ) > 60.
WRITE: 16 LV_TEXT, / ''.
CLEAR LV_TEXT.
ENDIF.
CONCATENATE LV_TEXT GT_TGSBT-GSBER '-' GT_TGSBT-GTEXT
INTO LV_TEXT SEPARATED BY SPACE.
ENDLOOP.
WRITE: 16 LV_TEXT.
CLEAR LV_TEXT.
WRITE: /2 'Division',15 ':'.
LOOP AT GT_TECOKT.
IF STRLEN( LV_TEXT ) > 60.
WRITE: 16 LV_TEXT, /.
CLEAR LV_TEXT.
ENDIF.
CONCATENATE LV_TEXT GT_TECOKT-COKEY '-' GT_TECOKT-LTEXT
INTO LV_TEXT SEPARATED BY SPACE.
ENDLOOP.
WRITE: 16 LV_TEXT.
CLEAR LV_TEXT.
WRITE: /2 'Group',15 ':'.
LOOP AT GT_TE422 .
IF STRLEN( LV_TEXT ) > 60.
WRITE: 16 LV_TEXT, /.
CLEAR LV_TEXT.
ENDIF.
CONCATENATE LV_TEXT GT_TE422-TERMSCHL '-' GT_TE422-TERMTEXT
INTO LV_TEXT SEPARATED BY SPACE.
ENDLOOP.
WRITE: 16 LV_TEXT.
CLEAR LV_TEXT.
**legends
* write :/ text-028, 15 ':',16 text-029.
**now write the headings on every page
SET LEFT SCROLL-BOUNDARY COLUMN 50.
FORMAT COLOR 1 ON.
WRITE :/1(244) SY-ULINE.
WRITE :/1 SY-VLINE,6 SY-VLINE,50 SY-VLINE, 58 SY-VLINE, 59
'<----------------------------------',
'U R B A N A R E A',
'----------------------------------->'.
WRITE : 151 SY-VLINE, 152
'<----------------------------------',
'R U R A L A R E A',
'----------------------------------->',
244 SY-VLINE.
WRITE :/1 SY-VLINE,
2 'Slno',
6 SY-VLINE,
7 'Revenue Category',
50 SY-VLINE,
51 'A/C',
58 SY-VLINE,
59 'Cons-',
67 SY-VLINE,
68 'Deff',
75 SY-VLINE,
76 'Conn',
89 SY-VLINE,
90 'Sold',
108 SY-VLINE,
109 'Demand',
129 SY-VLINE,
130 'Previous',
151 SY-VLINE,
152 'Cons-',
160 SY-VLINE,
161 'Deff',
168 SY-VLINE,
169 'Conn',
182 SY-VLINE,
183 'Sold',
201 SY-VLINE,
202 'Demand',
222 SY-VLINE,
223 'Previous',
244 SY-VLINE.
WRITE :/1 SY-VLINE,
6 SY-VLINE,
50 SY-VLINE,
51 'Code',
58 SY-VLINE,
59 'umers',
67 SY-VLINE,
68 'mtrs',
75 SY-VLINE,
76 'Load-KW',
89 SY-VLINE,
90 'Units',
108 SY-VLINE,
129 SY-VLINE,
130 'Arrear',
151 SY-VLINE,
152 'umers',
160 SY-VLINE,
161 'mtrs',
168 SY-VLINE,
169 'Load-KW',
182 SY-VLINE,
183 'Units',
201 SY-VLINE,
222 SY-VLINE,
223 'Arrear',
244 SY-VLINE.
WRITE :/1(244) SY-ULINE.
SET LEFT SCROLL-BOUNDARY COLUMN 59.
* Start of Data Selection
START-OF-SELECTION.
SELECT GSBER GTEXT INTO TABLE GT_TGSBT FROM TGSBT
WHERE SPRAS = SY-LANGU.
SELECT IND_SECTOR TEXTLONG INTO TABLE GT_TB024
FROM TB024 WHERE SPRAS = SY-LANGU
AND ( ( IND_SECTOR >= '01' AND IND_SECTOR <= '55' )
OR ( IND_SECTOR = '57' OR IND_SECTOR = '58'
OR IND_SECTOR = '94' ) ).
SELECT SINGLE KTX INTO GV_MNTH_NAME FROM T247
WHERE MNR = P_BMNTH+5(2) AND SPRAS = SY-LANGU.
***master data selection
PERFORM CONSUMER_DATA_SELECTION.
*&--Get Meter Status Connected Load & MF for each installation
PERFORM OPERAND_DATA_SELECTION.
*&--Get the Demand corresponding to each Print documents selected
PERFORM BILLING_DATA_SELECTION.
*&--Get the arrears corresponding to each Print document selected
PERFORM ARREAR_DATA_SELECTION.
*&--To include Mannual R-15 into computerized R-15.
IF P_INCLUD = 'X'.
OPEN DATASET P_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET P_FILE INTO GWA_MANUAL_DATA.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
APPEND GWA_MANUAL_DATA TO GT_MANUAL_DATA.
ENDIF.
ENDDO.
CLOSE DATASET P_FILE.
DELETE DATASET P_FILE.
ENDIF.
END-OF-SELECTION.
* End of data Selection
* Start of Data Processing
PERFORM FINAL_TABLE_PREPARE.
PERFORM FINAL_OUTPUT_PREPARE.
PERFORM FINAL_OUTPUT_DISPLAY.
* End of Data Processing
PERFORM FREE_MEMORY.
*& Form master_data_selection
* text
* --> p1 text
* <-- p2 text
FORM CONSUMER_DATA_SELECTION .
DATA: LV_MAX_DAYS TYPE I,
LV_LAST_DAY(2) TYPE C,
LV_IMONTH TYPE I,
LV_IYEAR TYPE I,
LV_BMNTH TYPE ZERDK_ERCHC-V_ABRMENGE,
LV_BYEAR TYPE ZERDK_ERCHC-EZ_ABRMENGE,
*&----Temporary tables for global internal tables.
LT_DBERCHZ1_TEMP LIKE TABLE OF GWA_DBERCHZ1,
LWA_DBERCHZ1_TEMP LIKE GWA_DBERCHZ1,
LT_ERCH LIKE TABLE OF GWA_ERCH,
LWA_ERCH LIKE GWA_ERCH,
LT_EVER LIKE TABLE OF GWA_EVER.
*DATA: lt_ever_fkkvkp like gwa_ever_eanlh_fkkvkp occurs 0.
LV_IMONTH = P_BMNTH+5(2).
LV_IYEAR = P_BMNTH(4).
LV_BMNTH = P_BMNTH+5(2).
LV_BYEAR = P_BMNTH(4).
CALL FUNCTION 'RTP_US_API_MAX_DAYS_IN_MONTH'
EXPORTING
I_DATE_MONTH = LV_IMONTH
I_DATE_YEAR = LV_IYEAR
IMPORTING
E_MAX_DAYS = LV_MAX_DAYS.
LV_LAST_DAY = LV_MAX_DAYS.
CONCATENATE P_BMNTH(4) P_BMNTH+5(2) LV_LAST_DAY INTO GV_HIGHDATE.
IF SO_GPART[] IS INITIAL.
SELECT VKONTO ANLAGE ABRSPERR
INTO TABLE GT_EVER
FROM EVER
WHERE GSBER IN SO_GSBER
AND COKEY IN SO_COKEY
AND BUKRS = 'CSEB'
AND SPARTE = '01'
AND KOFIZ = '02'.
**get installation no from contract data and check biling class in eanlh
IF GT_EVER[] IS INITIAL.
MESSAGE 'No Business Partner exist for entered selection data' TYPE 'A'.
ENDIF.
IF NOT GT_EVER[] IS INITIAL.
SELECT VKONT KTOKL INTO TABLE GT_FKKVKP
FROM FKKVKP
FOR ALL ENTRIES IN GT_EVER
WHERE VKONT = GT_EVER-VKONT
AND GPART IN SO_GPART.
IF GT_FKKVKP[] IS INITIAL.
MESSAGE 'No Business Partner exist for entered Selection' TYPE 'A'.
ENDIF.
ENDIF.
ELSE.
SELECT VKONT KTOKL INTO TABLE GT_FKKVKP
FROM FKKVKP
WHERE GPART IN SO_GPART.
IF NOT GT_FKKVKP[] IS INITIAL.
SELECT VKONTO ANLAGE INTO TABLE GT_EVER
FROM EVER
FOR ALL ENTRIES IN GT_FKKVKP
WHERE VKONTO EQ GT_FKKVKP-VKONT
AND GSBER IN SO_GSBER
AND COKEY IN SO_COKEY
AND BUKRS EQ 'CSEB'
AND SPARTE EQ '01'
AND KOFIZ EQ '02'.
ENDIF.
ENDIF.
IF GT_EVER[] IS INITIAL AND GT_FKKVKP[] IS INITIAL.
MESSAGE 'No Business Partner exist for entered Selection' TYPE 'A'.
ENDIF.
SELECT ANLAGE BRANCHE INTO TABLE GT_EANLH
FROM EANLH
FOR ALL ENTRIES IN GT_EVER
WHERE ANLAGE EQ GT_EVER-ANLAGE
AND ABLEINH IN SO_MRU
AND AKLASSE EQ'0002'
AND AB <= GV_HIGHDATE
AND BIS => GV_HIGHDATE.
IF GT_EANLH[] IS INITIAL.
MESSAGE 'No Business Partner exist for entered Selection' TYPE 'A'.
ENDIF.
SORT : GT_EVER BY VKONT ANLAGE,
GT_FKKVKP BY VKONT,
GT_EANLH BY ANLAGE.
LOOP AT GT_EANLH INTO GWA_EANLH.
READ TABLE GT_EVER INTO GWA_EVER WITH KEY ANLAGE = GWA_EANLH-ANLAGE.
IF SY-SUBRC = 0.
READ TABLE GT_FKKVKP INTO GWA_FKKVKP
WITH KEY VKONT = GWA_EVER-VKONT.
IF SY-SUBRC = 0.
GWA_EVER_EANLH_FKKVKP-VKONT = GWA_EVER-VKONT.
GWA_EVER_EANLH_FKKVKP-ANLAGE = GWA_EVER-ANLAGE.
GWA_EVER_EANLH_FKKVKP-ABRSPERR = GWA_EVER-ABRSPERR.
GWA_EVER_EANLH_FKKVKP-BRANCHE = GWA_EANLH-BRANCHE.
GWA_EVER_EANLH_FKKVKP-KTOKL = GWA_FKKVKP-KTOKL.
APPEND GWA_EVER_EANLH_FKKVKP TO GT_EVER_EANLH_FKKVKP.
CLEAR GWA_EVER_EANLH_FKKVKP.
ENDIF.
ENDIF.
ENDLOOP.
IF GT_EVER_EANLH_FKKVKP[] IS INITIAL.
MESSAGE 'No Business Partner exist for Selection Data' TYPE 'A'.
ENDIF.
*&----get all the billdocuments for the busines partner's contract
*&----account
SELECT BELNR VKONT INTO TABLE GT_ERCH
FROM ERCH
FOR ALL ENTRIES IN GT_EVER_EANLH_FKKVKP
WHERE VKONT EQ GT_EVER_EANLH_FKKVKP-VKONT.
*&----get the BILL MONTH & BILL YEAR FOR THE BILLDOCUMENTS.
IF NOT GT_ERCH[] IS INITIAL.
SELECT BELNR EIN01 V_ABRMENGE INTO TABLE GT_DBERCHZ1
FROM DBERCHZ1
FOR ALL ENTRIES IN GT_ERCH
WHERE BELNR EQ GT_ERCH-BELNR
AND AKLASSE = '0002'
AND ( ( EIN01 = 'BILL_MNTH1'
AND V_ABRMENGE = P_BMNTH+5(2) )
OR ( EIN01 = 'BILL_YEAR1'
AND V_ABRMENGE = P_BMNTH(4) ) ).
*&---- GET THOSE BILL DOCUMENTS WHICH ARE FOR THE ENTERED BILL MONTH
IF NOT GT_DBERCHZ1[] IS INITIAL.
LOOP AT GT_DBERCHZ1 INTO GWA_DBERCHZ1 WHERE EIN01 = 'BILL_MNTH1'
AND V_ABRMENGE = P_BMNTH+5(2).
READ TABLE GT_DBERCHZ1 INTO LWA_DBERCHZ1_TEMP
WITH KEY BELNR = GWA_DBERCHZ1-BELNR EIN01 = 'BILL_YEAR1'
V_ABRMENGE = P_BMNTH(4).
IF SY-SUBRC = 0.
APPEND LWA_DBERCHZ1_TEMP TO LT_DBERCHZ1_TEMP.
CLEAR: LWA_DBERCHZ1_TEMP.
ENDIF.
ENDLOOP.
GT_DBERCHZ1[] = LT_DBERCHZ1_TEMP[].
ENDIF.
ENDIF.
*&---NOW FIND THE PRINT DOCUMENTS FOR THE SELECTED BILLDOCUMENTS.
IF NOT GT_DBERCHZ1[] IS INITIAL.
SELECT BELNR OPBEL BUDAT FROM ERCHC
INTO TABLE GT_ERCHC
FOR ALL ENTRIES IN GT_DBERCHZ1
WHERE BELNR = GT_DBERCHZ1-BELNR
AND INTOPBEL EQ SPACE
AND SIMULATED EQ SPACE
AND INVOICED EQ 'X'.
ENDIF.
IF NOT GT_ERCHC[] IS INITIAL.
LOOP AT GT_ERCHC INTO GWA_ERCHC.
READ TABLE GT_ERCH INTO GWA_ERCH WITH KEY BELNR = GWA_ERCHC-BELNR.
IF SY-SUBRC = 0.
APPEND GWA_ERCH TO LT_ERCH.
CLEAR GWA_ERCH.
ENDIF.
CLEAR GWA_ERCHC.
ENDLOOP.
ENDIF.
GT_ERCH[] = LT_ERCH[].
FREE: LT_ERCH, LT_DBERCHZ1_TEMP,LWA_DBERCHZ1_TEMP.
LOOP AT GT_EVER_EANLH_FKKVKP INTO GWA_EVER_EANLH_FKKVKP.
* READ TABLE gt_erdk_erchc INTO gwa_erdk_erchc
* WITH KEY vkont = gwa_ever_eanlh_fkkvkp-vkont.
READ TABLE GT_ERCH INTO GWA_ERCH
WITH KEY VKONT = GWA_EVER_EANLH_FKKVKP-VKONT.
IF SY-SUBRC <> 0.
IF GWA_EVER_EANLH_FKKVKP-ABRSPERR = SPACE.
GWA_EVER_EANLH_FKKVKP-ABRSPERR = '01'.
MODIFY GT_EVER_EANLH_FKKVKP FROM GWA_EVER_EANLH_FKKVKP
TRANSPORTING ABRSPERR.
APPEND GWA_EVER_EANLH_FKKVKP TO GT_EVER_EANLH_FKKVKP_INACT.
ENDIF.
ELSE.
IF GWA_EVER_EANLH_FKKVKP-ABRSPERR <> SPACE.
GWA_EVER_EANLH_FKKVKP-ABRSPERR = SPACE.
MODIFY GT_EVER_EANLH_FKKVKP FROM GWA_EVER_EANLH_FKKVKP
TRANSPORTING ABRSPERR.
ENDIF.
ENDIF.
CLEAR GWA_ERCH.
ENDLOOP.
REFRESH GT_TECOKT[].
IF NOT SO_COKEY[] IS INITIAL.
SELECT COKEY LTEXT INTO TABLE GT_TECOKT
FROM TECOKT
WHERE COKEY IN SO_COKEY
AND SPRAS = SY-LANGU .
* %_HINTS ORACLE '("TECOKT","TECOKT~1")'.
ENDIF.
IF NOT SO_MRU[] IS INITIAL.
SELECT TERMSCHL TERMTEXT INTO TABLE GT_TE422
FROM TE422
WHERE TERMSCHL IN SO_MRU.
ENDIF.
*FREE lt_ever_fkkvkp[].
ENDFORM. " consumer_data_selection
*& Form Operand_data_selection
* text
* --> p1 text
* <-- p2 text
FORM OPERAND_DATA_SELECTION .
DATA: LT_EVER_EANLH_FKKVKP_ACT LIKE TABLE OF GWA_EVER_EANLH_FKKVKP.
* SORT gt_ever_eanlh_fkkvkp BY vkont.
CHECK NOT GT_EVER_EANLH_FKKVKP[] IS INITIAL.
**now depending upon the billing month check the time slice date
**the last date of the billing month or the range of billing month
*should fall in between the time slice of the installation
** billing month to is space
**now select operands for processed installation
LT_EVER_EANLH_FKKVKP_ACT[] = GT_EVER_EANLH_FKKVKP[].
DELETE LT_EVER_EANLH_FKKVKP_ACT WHERE ABRSPERR NE SPACE.
IF NOT LT_EVER_EANLH_FKKVKP_ACT[] IS INITIAL.
SELECT ANLAGE OPERAND WERT1
FROM ETTIFN
INTO TABLE GT_ETTIFN
FOR ALL ENTRIES IN LT_EVER_EANLH_FKKVKP_ACT
WHERE ANLAGE = LT_EVER_EANLH_FKKVKP_ACT-ANLAGE
AND OPERAND IN ('MTR_STS','CONN_LOAD','LOAD_CODE','KWH_MF')
AND ( AB <= GV_HIGHDATE AND BIS >= GV_HIGHDATE ).
* %_HINTS ORACLE '("ETTIFN","ETTIFN~003")'.
ENDIF.
ENDFORM. " Operand_data_selection
*& Form billing_data_selection
*&------------------------------Hi,
Please do run time analysis as Rob correctly mentioned or do SQL trace(ST05) to find where the program is consuming more time.
Lanka -
Want to have own selection screen in HR-ABAP report using LDB
Hi experts,
I am working on HR-ABAP report using LDB pnp and infotypes..But, here we get the built in selection criterion..but I want my own selection screen to be displayed..whats the solution for this??? Is it possible to create my own selection screen instead of default one..and how???
Please help me..its very urgent..Hi,
chk this out:
Create Report Categories
In this step, you define the report categories and determine the layout
of the standard selection screen for these report categories. You can
create report categories for programs or queries that are based on the
PNP or PNPCE logical databases.
The definition of report categories is divided into two sections:
o In the Change Report Category view, you define general attributes
such as sort order, input fields for date, and so on.
o In the Change Selection Criteria view, you define which selection
fields of the logical database should be avaliable on the selection
screen.
Example
You want to set up your system so that your employees can only start
evaluation reports for Payroll if they use a payroll area. Within a
payroll area, you should be able to select according to personnel
number. Additional selection criteria should not be possible and you
should not be allowed to enter a sort sequence.
Standard settings
The standard system already contains report categories. You can find the
attributes of the report categories in the table.
Note the following five report categories in particular:
o Report category ' ' is the SAP default report category for
programs that are based on the PNP logical database.
o Report category PNPCE is the SAP default category for programs that
are based on the PNPCE logical database.
o Report category '00000000' is the customer-specific default category
for programs that are based on the PNP logical database.
o Report category '0PNPCE' is the customer-specific default category
for programs that are based on the PNPCE logical database.
o Report category __X2001 is the default category for Queries that
are based on an InfoSet of the PNP LDB.
o Report category QUEPNPCE is the default category for queries that
are based on an InfoSet of the PNPCE LDB.
The default report categories are used when a report is called if
the report has not been assigned a report category.
Parameters and Options for Report Categories of the LDB PNP and PNPCE
Parameters and Options in Screen Area General Data
If you activate this parameter, you can only enter data on the data
selection period if you use reports that have been assigned. The
same date entries are then used for the person selection as for the
date selection.
o Matchcode allowed
If you activate this parameter, you have use of a Matchcode
pushbutton (search help) if you use reports that have been assigned.
This pushbutton enables you to perform the person selection.
o Sort allowed
If you activate this parameter, you have use of a Sort pushbutton if
you use report that have been assigned. This pushbutton enables you
to define a sort order before you execute the report.
o Organizational structure allowed
If you activate this parameter, you have use of an Org.Structure
pushbutton if you use reports that have been assigned. This
pushbutton enables you to perform the person selection.
Note:
For more information about these options, see the online
documentation under this path:
SAP Library -> Human Resources -> Reporting in Human Resources
Management -> Standard HR Reports -> Report Selection Screen in
Human Resources Management.
Parameters and Options in Screen Areas Data Selection Period/Person
Selection Period/Payroll Area/Period/Year
o Options for data selection period and person selection period (key
date and so on)
Here you define which options for date and person selection are
available for reports that have been assigned.
o Options for payroll area/period/year
Here you define which options for selection using payroll
area/period/year are available for reports that have been assigned.
Parameters and Options in Screen Area Selection View
o Type/Name
This parameter enables you to use selection views to define report
categories. You use the selection view selected here to determine
which fields are available in the Dynamic Selectionsy.
Note:
You create selection views for the PNP and PNPCE logical databases
in the Object Navigator (SE80):
1. Start the Object Navigator (SE80)
2. Choose Workbench -> Edit Object.
3. Choose the More... tab page and the Selection view on this tab
page.
4. Choose Create.
5. In the Create Selection View dialog box, choose the For any
tables option.
6. In the Name of view field, enter a name for your selection view.
7. In the Tables dialog box, enter the name of the table from which
you want to use fields.
Note:
When you enter the table name, observe the naming convention in
Personnel Administration:
Infotype number: nnnn -> table name: PAnnnn
8. Choose Continue.
9. In the Functional groups area, define functional groups by
assigning a name and a number.
10. Assign fields from the selected tables to the functional groups
by entering the number of the desired functional group in front of
each field.
11. Save your entries.
For more information about adjusting the dynamic selections using
your own selection views, see the online documentation under the
following menu path:
SAP Library -> Human Resources -> Reporting in Human Resources
Management -> HR Standard Reports -> Report Selection Screen in
Human Resources Management -> Enhancing the Selection Screen -
Dynamic Selections.
If you do not want to offer dynamic selections, make the following
settings:
- LDB PNP: In the Selection view field, enter PNP_NO_FREE_SEL.
- LDB PNPCE: Leave the Selection view field empty.
Parameters and Options in Screen Area Data Selection Period/Person
Selection Period/Payroll Area/Period/Year
o Available input parameters, date or period entry (today, key date,
all, and so on), and standard value.
Using the Standard value option, you define which of the selected
options is shown.
Parameters and Options in Screen Area CE Selection Fields
o CE selection fields (external person ID, grouping reason, grouping
value)
Using the options in this area, you define whether the external
person Id, grouping reason, or grouping value are available on the
selection screen.
Note:
These parameters are only relevant for you if you implement
Concurrent Employment (see also note 517071).
Parameters and Options in Screen Area Selection view
o Dynamic selections as dialog box
If this switch is set, you can call the dynamic selections as a
dialog box.
o Dynamic selections active
If this switch is set, the dynamic selections of the logical
database are active at the start of the report.
Note that the following combinations are possible for the last two
options mentioned:
Dyn.Sel. as dialog box/Dyn.Sel. active: inactive/inactive
Dyn.Sel. as dialog box/Dyn.Sel. active: inactive/active
Dyn.Sel. as dialog box/Dyn.Sel. active: active/inactive
Activities
1. Choose Edit -> New entries.
2. Enter an abbreviation and a long text for the report category.
The customer name range for report categories is 0-9.
3. Select the For the PNPCE logical database checkbox, if you want to
create a report category for a program or for queries of the PNPCE
logical database.
4. In the General Data screen area, choose the desired options.
If you want to use selection IDs, you must have first created and
grouped selection Ids. The IMG path to do this is given in the
parameter description section.
5. In the Data selection period/person selection period or Selection
period screen area, choose the desired options.
6. In the Selection view screen area, choose the desired options.
7. In the CE selection fields screen area, choose the desired (only
possible for report categories of the LDB PNPCE).
8. Save your entries.
9. Choose the subactivity Permitted selection criteria.
10. Choose Edit -> New entries.
11. In the Select option field, use the input help to select each field
that should be available on the selection screen.
12. Select the checkbox in the 1.page column, if you want this selection
field to be available directly when you call the selection screen.
Further notes
13. If you want to copy entries, you still have to enter the selection
parameters again in the subsequent screen.
o If you create the report category '000000000', a selection screen is
generated according to report category '00000000'for all reports for
which a report category has not explicitly been assigned.
Assign Report Categories
In this step, you assign a report category to your reports.
Example
You have created your own report, for example ZPCTEST1, and would like
it to have the selection screen that corresponds to that of the
evaluation report for Payroll, which is assigned to report category
'__M00001'.
Assign report category '__M00001' to the report.
Requirements
You must have defined the Report Categories.
Standard settings
SAP Standard Reports:
In the standard system, reports are assigned a report category. If you
want to override these assignments, perform the activities described
here. If you want to assign report categories to standard reports using
SE38, this represents a modification.
Customer-Specific Reports:
For reports you have developed yourself, you can either assign report
categories by performing the activities described here or directly in SE38.
Recommendation
Only assign a report category if you have created your own reports or if
the selection screens in the standard system do not meet your
requirements.
Activities
1. Choose Edit -> New entries.
2. Perform the required assignment using the Program name and Report
category fields.
3. Save your entries.
reward if helpful
regards,
madhumitha -
Pushbutton on the application bar on an abap report
Hello All,
I need to have a pushbutton (labelled Download) on the application bar on the abap report screen .
This button should enable me to download the report contents in a file format (like excel).
Please can you guys help me acheive this.How should the button with this functionality be placed in application bar?
Thanks in advance for the kind help
SwatiHi Swathi,
In such case, as said above, create a new GUi status and then assign to the report using the below statement:
AT PFnn.
Effect
This obsolete statement defines an event block whose event is triggered by the ABAP runtime environment during list display - provided the screen cursor is on a list line and a function is selected using the function code PFnn. Here nn stands for a number between 01 and 24. In the standard list status, these function codes are assigned to the function keys of the input device.
Then what processing needs to be done when the user presses the button, will be written in the below control statement..
AT USER-COMMAND
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment if, during the display of a screen list, a function with a self-defined function code was chosen.
Note
Self-defined function codes are all those that include character combinations, except for the following:
The function codes "PICK" and "PFnn" ("nn"stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PFnn.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
Table 1
Function code Function
%CTX Call a context menu
%EX Exit
%PC Save to file
%PRI Print
%SC Search for ...
%SC+ Find next
%SL Search in office
%ST Save to report tree
Table 2
Function code Function
BACK Back
P- Scroll to previous page
P-- Scroll to first page
P+ Scroll to next page
P++ Scroll to last page
PFILE name Store list lines in a text file named "abap.lst" in standard character representation in the standard directory of the application server. If a name is entered using name, this is converted to lowercase letters and used as the file name.
PL- Scroll to first line of the page
PL-n Scroll n lines back
PL+ Scroll to last line of the page
PL+n Scroll n lines up
PNOP No effect
PP- Scroll back one page
PP-n Scroll n pages back
PP+ Scroll one page forward
PP+n Scroll n pages forwad
PPn Scroll to beginning of page n
PRI, PRINT Print
PS-- Scroll to first column
PS++ Scroll to last column
PS- Scroll one column to the left
PS-n Scroll n columns to the left
PS+ Scroll one column to the right
PS+n Scroll n columns to the right
PSn Scroll to column n
PZn Scroll to line n
RW Cancel
Example
This program works with a self-defined GUI status MYLIST. The function that is linked there with the function code MY_SELECTION causes the event AT USER-COMMAND during list display and also creates details lists.
REPORT demo_at_user_command.
START-OF-SELECTION.
SET PF-STATUS 'MYLIST'.
WRITE 'List line'.
AT USER-COMMAND.
IF sy-lsind = 20.
SET PF-STATUS 'MYLIST' EXCLUDING 'MY_SELECTION'.
ENDIF.
CASE sy-ucomm.
WHEN 'MY_SELECTION'.
WRITE: / 'You worked on list', sy-listi,
/ 'You are on list', sy-lsind.
ENDCASE.
Regards
Shiva -
Abap report error while downloading to excel.
Hello All,
I have a abap report which displayes the output in frontend and I want to download it to the excel file.
When i choose from menu bar the options like--
LIST-> MOVE ->Save to PC File. some of the negative values get merged into one single value.
I have two different negative values say 115 10- in one cell but when I download it to the excel file this value is dispalyed as -11510 . Also I ahve noticed that only the values with one negative sign are dispalyed wrongly.
The values with -115 -10 are dispalyed correctly.
Could anyone please let me know why this happens?
Many Thanks,
Komal.Hi Komal ,
I have two different negative values say 115 10- in one cell but when I download it to the excel file this value is dispalyed as -11510 . Also I ahve noticed that only the values with one negative sign are dispalyed wrongly.
as value 115 10- are in one cell in output they will be saved as one -11510 only .
But i don't understand why you are saving 115 and 10- in one cell or one column if they are two different value .
regards
Deepak.
Edited by: Deepak Dhamat on Aug 10, 2011 11:07 AM -
Home-grown ABAP report sometimes hangs & sometimes finishes successfully
Dear All,
I am re-posting the below thread, which was previously posted on the : SAP on DB2 UDB for i5/OS (DB4) forum, maybe I will get a reply :
We are implementing SAP ECC 6.0 (ABAP stack) on IBM System i (iSeries), i5/OS V5R4, Kernel patch level 173
We have a home-grown ABAP report that sometimes finishes successfully and sometimes just hangs; i.e. through the OS/400 job monitoring, no change happens in the database records I/O counts.
Below is the OS/400 job log, related to a case where the report did not complete successfully (actually the below is an excerpt from the beginning and the end of the OS/400 job log)
I would highly appreciate any advise about the cause of this problem :
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 1
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
CPC2196 Completion 00 05/11/08 11:44:32.099024 QLICUSRL QSYS 0113 QXDAEDRS QSYS *STMT
To module . . . . . . . . . : QXDAEDRS
To procedure . . . . . . . : QxdaProcessCommandEDRS
Statement . . . . . . . . . : 325
Message . . . . : Library QGY added to library list.
Cause . . . . . : If the ADDLIBLE command was used, QGY was added to the
user library list. If the CHGSYSLIBL command was used, QGY was added to the
system portion of the library list.
CPC2198 Completion 00 05/11/08 11:44:32.099232 QLICHLLE QSYS 01A3 QXDAEDRS QSYS *STMT
To module . . . . . . . . . : QXDAEDRS
To procedure . . . . . . . : QxdaProcessCommandEDRS
Statement . . . . . . . . . : 325
Message . . . . : Current library changed to R3PRODATA.
Cause . . . . . : The current library in the library list was changed to
R3PRODATA.
*NONE Information 05/11/08 11:44:32.214488 R3INLPGM R3PRO400 *STMT R3INLPGM R3PRO400 *STMT
From module . . . . . . . . : O4TMKLIBI
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBI
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : R3PRO400/R3INLPGM: File Version: 7000, 173, 0, 0
*NONE Information 05/11/08 11:44:32.214640 R3INLPGM R3PRO400 *STMT R3INLPGM R3PRO400 *STMT
From module . . . . . . . . : O4TMKLIBI
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBI
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : R3PRO400/R3INLPGM: Product Version: 700, patch 173,
changelist 0
*NONE Information 05/11/08 11:44:32.214808 R3INLPGM R3PRO400 *STMT R3INLPGM R3PRO400 *STMT
From module . . . . . . . . : O4TMKLIBI
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBI
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : R3PRO400/R3INLPGM: Platform: os400 for releases OS400 3 5,
OS400 4 5, OS400 1 6
*NONE Information 05/11/08 11:44:32.214904 R3INLPGM R3PRO400 *STMT R3INLPGM R3PRO400 *STMT
From module . . . . . . . . : O4TMKLIBI
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBI
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : R3PRO400/R3INLPGM: Special Build Description: OPT (Aug 11
2008, 08:14:03) (ASCII in PASE ASCII build)
*NONE Information 05/11/08 11:44:32.230728 R3INLPGM R3PRO400 *STMT R3INLPGM R3PRO400 *STMT
From module . . . . . . . . : O4TMKLIBI
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 2
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBI
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : R3INLPGM: Connect from Client Protocol: 610
*NONE Information 05/11/08 11:44:32.230840 R3INLPGM R3PRO400 *STMT R3INLPGM R3PRO400 *STMT
From module . . . . . . . . : O4TMKLIBI
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBI
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : R3INLPGM: Remote Link: /usr/sap/PRO/SYS/exe/run/DBSLDB4RMT
*NONE Information 05/11/08 11:44:32.268688 R3INLPGM R3PRO400 *STMT R3INLPGM R3PRO400 *STMT
From module . . . . . . . . : O4TMKLIBI
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBI
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : R3INLPGM: Kernel Library: SAPPROUCN
CPF9897 Completion 40 05/11/08 11:44:32.286120 QDBENCWT QSYS 0066 DBSLENCWT SAPPROUCN *STMT
To module . . . . . . . . . : DBSLENCWT
To procedure . . . . . . . : main
Statement . . . . . . . . . : 14
Message . . . . : CONCURRENT WRITE IS ENABLED.
Cause . . . . . : No additional online help information is available.
CPF9897 Completion 40 05/11/08 11:44:32.286136 QDBENCWT QSYS 0066 DBSLENCWT SAPPROUCN *STMT
To module . . . . . . . . . : DBSLENCWT
To procedure . . . . . . . : main
Statement . . . . . . . . . : 14
Message . . . . : CONCURRENT WRITE WILL BE ENABLED NEXT IPL.
Cause . . . . . : No additional online help information is available.
CPC2197 Completion 00 05/11/08 11:44:32.323144 QLICHLBL QSYS 013C QXDAEDRS QSYS *STMT
To module . . . . . . . . . : QXDAEDRS
To procedure . . . . . . . : QxdaProcessCommandEDRS
Statement . . . . . . . . . : 325
Message . . . . : Library SAPPROUCN removed from library list.
Cause . . . . . : If the RMVLIBLE command was used, SAPPROUCN was removed
from the user library list. If the CHGSYSLIBL command was used, SAPPROUCN
was removed from the system portion of the library list.
CPC2196 Completion 00 05/11/08 11:44:32.323368 QLICUSRL QSYS 0113 QXDAEDRS QSYS *STMT
To module . . . . . . . . . : QXDAEDRS
To procedure . . . . . . . : QxdaProcessCommandEDRS
Statement . . . . . . . . . : 325
Message . . . . : Library SAPPROUCN added to library list.
Cause . . . . . : If the ADDLIBLE command was used, SAPPROUCN was added to
the user library list. If the CHGSYSLIBL command was used, SAPPROUCN was
added to the system portion of the library list.
SAP4000 Information 00 05/11/08 11:44:32.336544 DBSLDB4RMT SAPPROUCN *STMT DBSLDB4RMT SAPPROUCN *STMT
From module . . . . . . . . : O4SAPUCI_E
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 3
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
From procedure . . . . . . : O4_QMHSNDPM__FPCcN21iN21T4PUcR11O4_ERRC0100
Statement . . . . . . . . . : 4
To module . . . . . . . . . : DBSLDB4RMT
To procedure . . . . . . . : CXXPEP__Fv
Statement . . . . . . . . . : *N
Message . . . . : Connect from workprocess w2 on MASAPPRO_PRO_00
CPC2196 Completion 00 05/11/08 11:44:32.975448 QLICHLBL QSYS 013C CHGR3SYSLE SAPPROUCN *STMT
To module . . . . . . . . . : CHGR3SYSLE
To procedure . . . . . . . : CHGR3SYSLE
Statement . . . . . . . . . : 13600
Message . . . . : Library R3SYS added to library list.
Cause . . . . . : If the ADDLIBLE command was used, R3SYS was added to the
user library list. If the CHGSYSLIBL command was used, R3SYS was added to
the system portion of the library list.
SQL7917 Information 00 05/11/08 11:47:23.199272 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : OPQRYDBM
Statement . . . . . . . . . : 16590
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
CPF9898 Information 40 05/11/08 11:54:11.399680 QXDAUTIL QSYS *STMT QXDAEDRS QSYS *STMT
From module . . . . . . . . : QXDATRACE
From procedure . . . . . . : QxdaWriteJoblog__FPciT1R16QxdaTraceControl
Statement . . . . . . . . . : 13
To module . . . . . . . . . : QXDAEDRS
To procedure . . . . . . . : QxdaConnectEDRSInternal__FPvPcT1PiT2T1R16clean
upMutexes_tP19XDAGlobalDataStruct
Statement . . . . . . . . . : 3266
Message . . . . : Connection #2, Server Job: 303463/QUSER/QXDARECVR.
Cause . . . . . : This message is used by application programs as a general
escape message.
CPF5009 Diagnostic 10 05/11/08 11:54:32.741480 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 22987
Message . . . . : Duplicate record key in member RSEUINC.
Cause . . . . . : The output or update operation to member number 1 record
number 4942 format RSEUINC, for member RSEUINC file RSEUINC in library
R3PRODATA, failed. Member number 1 record number 4941 format RSEUINC has the
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 4
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
same record key as member number 1 record number 4942 format RSEUINC. If
the record number is zero, the duplicate record key occurred on an output
operation. Recovery . . . : Change either record key so that the keys are
unique. Then try your request again.
CPF5034 Sender copy 30 05/11/08 11:54:32.741536 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 4942 record
format FORMAT0001 member number 1 failed because of a duplicate key in a
unique keyed member that is based on member RSEUINC file RSEUINC in library
R3PRODATA, or in a based-on member of RSEUINC. The failure could also have
been caused by an output or update operation done to another file by a
trigger program associated with file RSEUINC in library R3PRODATA. Recovery
. . . : See previously listed message CPF5009 to identify the file and
record with the duplicate key and change the key value so that it is unique.
Note that the file could be a file operated on by a trigger program. Then
try your request again. Possible choices for replying to message . . . . . .
. . . . . . . . . : C -- The request is canceled. I -- The request is
ignored.
CPF5034 Notify 30 05/11/08 11:54:32.741552 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 22987
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 4942 record
format FORMAT0001 member number 1 failed because of a duplicate key in a
unique keyed member that is based on member RSEUINC file RSEUINC in library
R3PRODATA, or in a based-on member of RSEUINC. The failure could also have
been caused by an output or update operation done to another file by a
trigger program associated with file RSEUINC in library R3PRODATA. Recovery
. . . : See previously listed message CPF5009 to identify the file and
record with the duplicate key and change the key value so that it is unique.
Note that the file could be a file operated on by a trigger program. Then
try your request again. Possible choices for replying to message . . . . . .
. . . . . . . . . : C -- The request is canceled. I -- The request is
ignored.
SQL0803 Diagnostic 30 05/11/08 11:54:32.748064 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint RSEUINC in R3PRODATA exists over one or
more columns of table RSEUINC in R3PRODATA. The operation cannot be
performed because one or more values would have produced a duplicate key in
the unique index or constraint. Recovery . . . : Change the statement so
that duplicate keys are not produced. For information on what rows contain
the duplicate key values, look at the previously listed messages in the job
log (DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 5
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
SQL7917 Information 00 05/11/08 12:33:54.649416 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : STORE_ACCPLN
Statement . . . . . . . . . : 19339
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
SQL7917 Information 00 05/11/08 12:33:54.709808 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : STORE_ACCPLN
Statement . . . . . . . . . : 19339
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
SQL7917 Information 00 05/11/08 12:33:54.745288 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : STORE_ACCPLN
Statement . . . . . . . . . : 19339
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 6
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
SQL7917 Information 00 05/11/08 12:34:28.245160 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : OPQRYDBM
Statement . . . . . . . . . : 16643
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
SQL7917 Information 00 05/11/08 12:49:06.875752 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : STORE_ACCPLN
Statement . . . . . . . . . : 19339
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
SQL7917 Information 00 05/11/08 12:49:06.935840 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : STORE_ACCPLN
Statement . . . . . . . . . : 19339
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 7
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
SQL7917 Information 00 05/11/08 12:49:06.965560 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : STORE_ACCPLN
Statement . . . . . . . . . : 19339
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
CPF9898 Information 40 05/11/08 12:50:51.470216 QXDAUTIL QSYS *STMT QXDAEDRS QSYS *STMT
From module . . . . . . . . : QXDATRACE
From procedure . . . . . . : QxdaWriteJoblog__FPciT1R16QxdaTraceControl
Statement . . . . . . . . . : 13
To module . . . . . . . . . : QXDAEDRS
To procedure . . . . . . . : QxdaConnectEDRSInternal__FPvPcT1PiT2T1R16clean
upMutexes_tP19XDAGlobalDataStruct
Statement . . . . . . . . . : 3266
Message . . . . : Connection #2, Server Job: 303480/QUSER/QXDARECVR.
Cause . . . . . : This message is used by application programs as a general
escape message.
SQL7917 Information 00 05/11/08 12:59:55.956784 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQOPEN
From procedure . . . . . . : SNDINFOMSG
Statement . . . . . . . . . : 24269
To module . . . . . . . . . : QSQOPEN
To procedure . . . . . . . : OPQRYDBM
Statement . . . . . . . . . : 16590
Message . . . . : Access plan not updated.
Cause . . . . . : The query optimizer rebuilt the access plan for this
statement, but the program could not be updated. Another job may be running
the program. The program cannot be updated with the new access plan until a
job can obtain an exclusive lock on the program. The exclusive lock cannot
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 8
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
be obtained if another job is running the program, if the job does not have
proper authority to the program, or if the program is currently being saved.
The query will still run, but access plan rebuilds will continue to occur
until the program is updated. Recovery . . . : See previous messages from
the query optimizer to determine why the access plan has been rebuilt. To
ensure that the program gets updated with the new access plan, run the
program when no other active jobs are using it.
CPC2206 Completion 00 05/11/08 13:06:49.865608 QSYCHONR QSYS 0665 QLIINSRT QSYS 0453
Message . . . . : Ownership of object SAPFGUTRBL in R3PRO02070 type *SQLPKG
changed.
Cause . . . . . : The ownership of object SAPFGUTRBL in library R3PRO02070
type *SQLPKG has changed.
CPC2206 Completion 00 05/11/08 13:06:50.312272 QSYCHONR QSYS 0665 QSQXPGM QSYS 0469
Message . . . . : Ownership of object SAPFGUTRBL in R3PRO02070 type *SQLPKG
changed.
Cause . . . . . : The ownership of object SAPFGUTRBL in library R3PRO02070
type *SQLPKG has changed.
SQL0204 Diagnostic 30 05/11/08 13:06:51.011064 QSQPRCED QSYS *STMT QSQPRCED QSYS *STMT
From module . . . . . . . . : QSQPRCED
From procedure . . . . . . : SENDDIAG
Statement . . . . . . . . . : 19346
To module . . . . . . . . . : QSQPRCED
To procedure . . . . . . . : QSQPRCED
Statement . . . . . . . . . : 18435
Message . . . . : T801WEI in R3PRO32060 type *SQLPKG not found.
Cause . . . . . : T801WEI in R3PRO32060 type *SQLPKG was not found. If the
member name is *ALL, the table is not partitioned. If this is an ALTER TABLE
statement and the type is *N, a constraint or partition was not found. If
this is not an ALTER TABLE statement and the type is *N, a function,
procedure, trigger or sequence object was not found. If a function was not
found, T801WEI is the service program that contains the function. The
function will not be found unless the external name and usage name match
exactly. Examine the job log for a message that gives more details on which
function name is being searched for and the name that did not match.
Recovery . . . : Change the name and try the request again. If the
object is a node group, ensure that the DB2 Multisystem product is installed
on your system and create a nodegroup with the CRTNODGRP CL command. If an
external function was not found, be sure that the case of the EXTERNAL NAME
on the CREATE FUNCTION statement exactly matches the case of the name
exported by the service program.
CPC2206 Completion 00 05/11/08 13:06:51.378408 QSYCHONR QSYS 0665 QLIINSRT QSYS 0453
Message . . . . : Ownership of object T801WEI in R3PRO32060 type *SQLPKG
changed.
Cause . . . . . : The ownership of object T801WEI in library R3PRO32060 type
*SQLPKG has changed.
CPC2206 Completion 00 05/11/08 13:06:51.439824 QSYCHONR QSYS 0665 QSQXPGM QSYS 0469
Message . . . . : Ownership of object T801WEI in R3PRO32060 type *SQLPKG
changed.
Cause . . . . . : The ownership of object T801WEI in library R3PRO32060 type
*SQLPKG has changed.
CPF5009 Diagnostic 10 05/11/08 13:06:51.708688 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 9
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate record key in member T801W.
Cause . . . . . : The output or update operation to member number 1 record
number 0 format T801W, for member T801W file T801W in library R3PRODATA,
failed. Member number 1 record number 751 format T801W has the same record
key as member number 1 record number 0 format T801W. If the record number
is zero, the duplicate record key occurred on an output operation. Recovery
. . . : Change either record key so that the keys are unique. Then try
your request again.
CPF5034 Sender copy 30 05/11/08 13:06:51.708736 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 0 record
format FORMAT0001 member number 1 failed because of a duplicate key in a
unique keyed member that is based on member T801W file T801W in library
R3PRODATA, or in a based-on member of T801W. The failure could also have
been caused by an output or update operation done to another file by a
trigger program associated with file T801W in library R3PRODATA. Recovery .
. . : See previously listed message CPF5009 to identify the file and
record with the duplicate key and change the key value so that it is unique.
Note that the file could be a file operated on by a trigger program. Then
try your request again. Possible choices for replying to message . . . . . .
. . . . . . . . . : C -- The request is canceled. I -- The request is
ignored.
CPF5034 Notify 30 05/11/08 13:06:51.708776 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 0 record
format FORMAT0001 member number 1 failed because of a duplicate key in a
unique keyed member that is based on member T801W file T801W in library
R3PRODATA, or in a based-on member of T801W. The failure could also have
been caused by an output or update operation done to another file by a
trigger program associated with file T801W in library R3PRODATA. Recovery .
. . : See previously listed message CPF5009 to identify the file and
record with the duplicate key and change the key value so that it is unique.
Note that the file could be a file operated on by a trigger program. Then
try your request again. Possible choices for replying to message . . . . . .
. . . . . . . . . : C -- The request is canceled. I -- The request is
ignored.
SQL0803 Diagnostic 30 05/11/08 13:06:51.710352 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint T801W in R3PRODATA exists over one or more
columns of table T801W in R3PRODATA. The operation cannot be performed
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 10
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
because one or more values would have produced a duplicate key in the unique
index or constraint. Recovery . . . : Change the statement so that
duplicate keys are not produced. For information on what rows contain the
duplicate key values, look at the previously listed messages in the job log
(DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
SQL0518 Diagnostic 30 05/11/08 13:06:51.732720 QSQROUTS QSYS *STMT QSQROUTS QSYS *STMT
From module . . . . . . . . : QSQCLNUP
From procedure . . . . . . : SQROUTE_CLEANUP
Statement . . . . . . . . . : 3814
To module . . . . . . . . . : QSQCLNUP
To procedure . . . . . . . : SQROUTE_CLEANUP
Statement . . . . . . . . . : 3814
Message . . . . : Prepared statement RD0IAAAABA not found.
Cause . . . . . : An EXECUTE statement referred to the statement RD0IAAAABA.
RD0IAAAABA is not a valid prepared statement. The statement has one of the
following conditions: -- The statement has never been prepared. -- The
statement identifies a prepared SELECT or DECLARE PROCEDURE statement. --
The statement was in error at prepare or bind time. -- The statement was
prepared in another program or another call of this program and the program
was created with CLOSQLCSR(*ENDPGM). -- The statement was prepared in
another module or another call of this module and the module was created
with CLOSQLCSR(*ENDMOD). -- The statement was prepared in another call of
this program and programs which have run SQL statements have ended and the
program was created with CLOSQLCSR(*ENDSQL). -- The statement was prepared
in another call of this module and the activation group ended between calls.
The module was created with CLOSQLCSR(*ENDACTGRP). -- The prepared statement
was destroyed by a COMMIT or ROLLBACK statement. This only occurs when
connected to a database other than DB2 UDB for iSeries. Recovery . . . :
Do one of the following: -- If RD0IAAAABA identifies a prepared SELECT or
DECLARE PROCEDURE statement, a different prepared statement must be named in
the EXECUTE statement. -- If the statement had errors, correct the errors
and either prepare the statement again or precompile the program again. --
Make certain that RD0IAAAABA has been prepared in the same program or module
call prior to using the EXECUTE statement or specify either
CLOSQLCSR(ENDSQL), CLOSQLCSR(ENDJOB), or CLOSQLCSR(*ENDACTGRP) when
precompiling the application. -- If the statement was deleted by a COMMIT or
ROLLBACK, either specify PREPARE WITH HOLD or bind the program with the
correct option to preserve prepared statements.
CPF5009 Diagnostic 10 05/11/08 13:06:56.094184 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate record key in member ATAB.
Cause . . . . . : The output or update operation to member number 1 record
number 644685 format ATAB, for member ATAB file ATAB in library R3PRODATA,
failed. Member number 1 record number 635738 format ATAB has the same record
key as member number 1 record number 644685 format ATAB. If the record
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 51
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
number is zero, the duplicate record key occurred on an output operation.
Recovery . . . : Change either record key so that the keys are unique.
Then try your request again.
CPF5034 Sender copy 30 05/11/08 13:06:56.094240 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
CPF5034 Notify 30 05/11/08 13:06:56.094256 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
SQL0803 Diagnostic 30 05/11/08 13:06:56.094376 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint ATAB in R3PRODATA exists over one or more
columns of table ATAB in R3PRODATA. The operation cannot be performed
because one or more values would have produced a duplicate key in the unique
index or constraint. Recovery . . . : Change the statement so that
duplicate keys are not produced. For information on what rows contain the
duplicate key values, look at the previously listed messages in the job log
(DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
CPF5009 Diagnostic 10 05/11/08 13:06:56.096008 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 52
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate record key in member ATAB.
Cause . . . . . : The output or update operation to member number 1 record
number 644685 format ATAB, for member ATAB file ATAB in library R3PRODATA,
failed. Member number 1 record number 635779 format ATAB has the same record
key as member number 1 record number 644685 format ATAB. If the record
number is zero, the duplicate record key occurred on an output operation.
Recovery . . . : Change either record key so that the keys are unique.
Then try your request again.
CPF5034 Sender copy 30 05/11/08 13:06:56.096048 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
CPF5034 Notify 30 05/11/08 13:06:56.096080 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
SQL0803 Diagnostic 30 05/11/08 13:06:56.096208 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint ATAB in R3PRODATA exists over one or more
columns of table ATAB in R3PRODATA. The operation cannot be performed
because one or more values would have produced a duplicate key in the unique
index or constraint. Recovery . . . : Change the statement so that
duplicate keys are not produced. For information on what rows contain the
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 53
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
duplicate key values, look at the previously listed messages in the job log
(DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
CPF5009 Diagnostic 10 05/11/08 13:06:56.098520 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate record key in member ATAB.
Cause . . . . . : The output or update operation to member number 1 record
number 644685 format ATAB, for member ATAB file ATAB in library R3PRODATA,
failed. Member number 1 record number 635819 format ATAB has the same record
key as member number 1 record number 644685 format ATAB. If the record
number is zero, the duplicate record key occurred on an output operation.
Recovery . . . : Change either record key so that the keys are unique.
Then try your request again.
CPF5034 Sender copy 30 05/11/08 13:06:56.098552 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
CPF5034 Notify 30 05/11/08 13:06:56.098568 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
SQL0803 Diagnostic 30 05/11/08 13:06:56.098720 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 54
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint ATAB in R3PRODATA exists over one or more
columns of table ATAB in R3PRODATA. The operation cannot be performed
because one or more values would have produced a duplicate key in the unique
index or constraint. Recovery . . . : Change the statement so that
duplicate keys are not produced. For information on what rows contain the
duplicate key values, look at the previously listed messages in the job log
(DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
CPF5009 Diagnostic 10 05/11/08 13:06:56.101560 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate record key in member ATAB.
Cause . . . . . : The output or update operation to member number 1 record
number 644685 format ATAB, for member ATAB file ATAB in library R3PRODATA,
failed. Member number 1 record number 635865 format ATAB has the same record
key as member number 1 record number 644685 format ATAB. If the record
number is zero, the duplicate record key occurred on an output operation.
Recovery . . . : Change either record key so that the keys are unique.
Then try your request again.
CPF5034 Sender copy 30 05/11/08 13:06:56.101592 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
CPF5034 Notify 30 05/11/08 13:06:56.101608 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
SQL0803 Diagnostic 30 05/11/08 13:06:56.101760 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 55
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint ATAB in R3PRODATA exists over one or more
columns of table ATAB in R3PRODATA. The operation cannot be performed
because one or more values would have produced a duplicate key in the unique
index or constraint. Recovery . . . : Change the statement so that
duplicate keys are not produced. For information on what rows contain the
duplicate key values, look at the previously listed messages in the job log
(DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
CPF5009 Diagnostic 10 05/11/08 13:06:56.105864 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate record key in member ATAB.
Cause . . . . . : The output or update operation to member number 1 record
number 644685 format ATAB, for member ATAB file ATAB in library R3PRODATA,
failed. Member number 1 record number 635906 format ATAB has the same record
key as member number 1 record number 644685 format ATAB. If the record
number is zero, the duplicate record key occurred on an output operation.
Recovery . . . : Change either record key so that the keys are unique.
Then try your request again.
CPF5034 Sender copy 30 05/11/08 13:06:56.105904 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
CPF5034 Notify 30 05/11/08 13:06:56.105920 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 56
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
SQL0803 Diagnostic 30 05/11/08 13:06:56.106056 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint ATAB in R3PRODATA exists over one or more
columns of table ATAB in R3PRODATA. The operation cannot be performed
because one or more values would have produced a duplicate key in the unique
index or constraint. Recovery . . . : Change the statement so that
duplicate keys are not produced. For information on what rows contain the
duplicate key values, look at the previously listed messages in the job log
(DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
CPF5009 Diagnostic 10 05/11/08 13:06:56.107696 QDBSIGEX QSYS 0D60 QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate record key in member ATAB.
Cause . . . . . : The output or update operation to member number 1 record
number 644685 format ATAB, for member ATAB file ATAB in library R3PRODATA,
failed. Member number 1 record number 635948 format ATAB has the same record
key as member number 1 record number 644685 format ATAB. If the record
number is zero, the duplicate record key occurred on an output operation.
Recovery . . . : Change either record key so that the keys are unique.
Then try your request again.
CPF5034 Sender copy 30 05/11/08 13:06:56.107736 QDBSIGEX QSYS 01EA QDBSIGEX QSYS 01EA
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
CPF5034 Notify 30 05/11/08 13:06:56.107752 QDBSIGEX QSYS 01EA QSQRUN3 QSYS *STMT
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : SQL_Insert
Statement . . . . . . . . . : 10309
Message . . . . : Duplicate key on access path.
Cause . . . . . : An output or update operation on record number 644685
5722SS1 V5R4M0 060210 Display Job Log MASAPPRO 05/11/08 14:49:22 Page 57
Job name . . . . . . . . . . : WP02 User . . . . . . : PRO00 Number . . . . . . . . . . . : 303461
Job description . . . . . . : R3_00 Library . . . . . : R3PRO400
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
record format FORMAT0001 member number 1 failed because of a duplicate key
in a unique keyed member that is based on member ATAB file ATAB in library
R3PRODATA, or in a based-on member of ATAB. The failure could also have been
caused by an output or update operation done to another file by a trigger
program associated with file ATAB in library R3PRODATA. Recovery . . . :
See previously listed message CPF5009 to identify the file and record with
the duplicate key and change the key value so that it is unique. Note that
the file could be a file operated on by a trigger program. Then try your
request again. Possible choices for replying to message . . . . . . . . . .
. . . . . : C -- The request is canceled. I -- The request is ignored.
SQL0803 Diagnostic 30 05/11/08 13:06:56.107880 QSQRUN3 QSYS *STMT QSQRUN3 QSYS *STMT
From module . . . . . . . . : QSQINS
From procedure . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
To module . . . . . . . . . : QSQINS
To procedure . . . . . . . : CLEANUP
Statement . . . . . . . . . : 24031
Message . . . . : Duplicate key value specified.
Cause . . . . . : An INSERT, UPDATE or ALTER TABLE statement was issued.
Unique index or unique constraint ATAB in R3PRODATA exists over one or more
columns of table ATAB in R3PRODATA. The operation cannot be performed
because one or more values would have produced a duplicate key in the unique
index or constraint. Recovery . . . : Change the statement so that
duplicate keys are not produced. For information on what rows contain the
duplicate key values, look at the previously listed messages in the job log
(DSPJOBLOG command) or press F10 (Display messages in job log) on this
display.
SQL0204 Diagnostic 30 05/11/08 13:06:56.159320 QSQPRCED QSYS *STMT QSQPRCED QSYS *STMT
From module . . . . . . . . : QSQPRCED
From procedure . . . . . . : SENDDIAG
Statement . . . . . . . . . : 19346
To module . . . . . . . . . : QSQPRCED
To procedure . . . . . . . : QSQPRCED
Statement . . . . . . . . . : 18435
Message . . . . : T801LEI in R3PRO32060 type *SQLPKG not found.
Cause . . . . . : T801LEI in R3PRO32060 type *SQLPKG was not found. If the
member name is *ALL, the table is not partitioned. If this is an ALTER TABLE
statement and tI don't have FIOS but I do use Safari to access the discussion forums without encountering the issue you've described (knock on wood). It's always hard to diagnose and troubleshoot connection issues without actually sitting in front of the computer (even more so when the problem is intermittent). Let me ask some questions:
Is your computer connecting wirelessly?
Have you tried resetting Safari and/or emptying the cache?
Have you tried Private Browsing to note any differences?
How about going to Safari's->Preferences->Security and checking/unchecking Web Contents and/or enabling/disabling cookies?
Have you tried creating another user account on your machine and log in with that user account to access the discussion board to see if there's a difference?
Good luck,
TK -
Hi,
Is it possible to create a special xls template for the ABAP report in sap. Uh, our key users want to have stock report in xls, which should have the company template form and colored columns
Do you have any experience with that?
Br
sasono response
-
Dear All,
Let me know how to test a ABAP Report using Transaction SCAT/SECATT.
I have used SCAT to upload the data into SAP from legacy System but How to use it for testing a report.
I have tried but couldn't able to find the solution.
Regards,
VikasHello,
Here is the step by step guide :
-> Start SECATT transaction in eCATT system
-> In the test script column enter the script name and move to the change mode
-> Enter the traget system details where you want to test your ABAP report in the attributes tab of the script
-> Click on the Pattern button and select either TCD REC or SAPGUI REC option
-> Then enter the transaction SE38 in the pop-up window in the place to enter the transaction
-> The control is taken to SE38 transaction in the target system entered , here enter the ABAP report name and click on the execute button
-> Now you will be asked to enter some input values , enter the values and then press execute again. Note you can parameterize the input values so that you can pass different set of values into the ABAP program from the script , so as to test the ABAP script for different set of values.
-> Once the recording is complete , stop the recording.
Hope it answers your question.
Thanks and Best regards,
Ajay -
Sale order before the regeneration of ABAP report: RSM13000
Hi there,
I am just wondering about something.
After we installed support packages, users could not get any sales order without to get any error message and I we could only see an error message via SM21 which says:
Run-time error "LOAD_TYPEPOOL_VERSION_MISMATCH" occurred.
So after we regenerated the ABAP report: RSM13000 after that everythings seems to be ok.
Now the question is: When we try to find the order numbers which the users created before the regeneration we find nothing.
What about this numbers? Did they have not been created at all or what hapened? They customer is asking now.
Thanks in advance
HanseatikI still do not know. We created them again
-
Interactive report column filters to display differently than column values
Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt -
Display an alert message through javascript when report column item is null
Hello,
I have a report column item which is an select list item and now i want to display an alert message when value is null, I mean no value is selected, this alert message should be fired when update button is clicked.
Can anyone please help me with this issue.
Thanks,
OrtonYou could try something like this:
declare
x INTEGER;
err_ct INTEGER := 0;
begin
x := 5; -- number of rows displayed
for i in 1 ... x (
IF wwv_flow.g_f08(i)) IS NULL THEN err_ct := err_ct + 1;
END IF;
end loop;
IF err_ct = 0 THEN
RETURN NULL;
ELSE
RETURN 'Nice error message: you must supply a value.';
END IF;This would be used with a PL/SQL validation: Function Returning Error Text. -
Hello,
I am writing a bespoke HR ABAP report. I am using logical database PNP for this.
I also need to include the Scale Proficiency Text in my report.
I have had a look at the SAP standard Qualifications Overview report and I can see that this uses the logical database PCH.
As I can only link to a single logical data, I am looking for a way of including the Scale Proficiency Text in my report.
Does anyone have any ideas on this?
Thanks,
RubyHi,
"" rp_provide_from_last p0033 space pn-begda pn-endda""
Here if u don't want subtype specific records then give space otherwise u have to specify Subtype instead of space.
""provide * from p0033 between pn-ebgda and pn-endda
endprovide.""
used as loop where all records for the employee would be selected
But if u use
""rp_provide_from_last p0033 '9001' pn-begda pn-endda""
It will fetch only latest record for particular employee whose subtype is 9001.
Hope it will help u!!!
Regards,
Aparna -
HI Gurus,
I have a ABAP report - basic list, with lot of batch data on it. based on the report they will copy the batch numbers and paste in standard transactions.
Users complaining to do a Ctrl + Y and then Ctrl + C then Ctrl + V to paste the batch numbers.
Is there anything we can do programatically using hot sopt on batch numbers so we get the selected BATCH and execute copy command programatically when they click on BATCH number on basic list.
All they need to do is Ctrl + V on standard transactions.
Is there anyway to achieve this?
Thanks GiriGiri - you would probably get more results if you mark this as a question. That way you can assign po1nts to helpful answers.
In any event why don't you just do a CALL TRANSACTION when the user double clicks on a line?
Rob -
SAP ERP 2005 SR 2 IDES installation error in step "Run ABAP Reports"
Hello,
I'm installing SAP ERP 2005 SR 2 IDES on Win2003 R2 SP2 and Oracle 10.2 to create a test-system for my diploma thesis.
During the step "Import ABAP" I got the following message:
object_checker.log
ERROR: 2008-05-21 20:50:38
1 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
invalid_objects.txt
package object type action status
SAPDFACT ?N pkey create
but the installation went on until "Run ABAP Reports".
Warnings and Errors in sapinst.log are:
WARNING 2008-05-27 15:09:36
Execution of the command "C:\usr\sap\IMP\SYS\exe\uc\NTI386\stopsap.exe name=IMP nr=00 SAPDIAHOST=imperia-sap" finished with return code -1. Output:
STOPSAP: execution of C:\usr\sap\IMP\SYS\exe\uc\NTI386\sapntwaitforhalt.exe name=IMP nr=00 SAPDIAHOST=imperia-sap 3600 failed
Details are written to C:\Programme\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\stopsap.log
WARNING 2008-05-27 15:09:36
Could not stop instance 'DVEBMGS00' of SAP system IMP.
WARNING 2008-05-27 15:09:38
Connect to message server (imperia-sap/3900) failed: NIECONN_REFUSED.
WARNING[E] 2008-05-27 15:12:05
FSL-06002 Error 1060 (Der angegebene Dienst ist kein installierter Dienst.) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
WARNING[E] 2008-05-27 15:21:42
FRF-00007 Unable to open RFC connection.
ERROR 2008-05-27 16:30:15
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
INFO 2008-05-27 16:30:19
RFC connection closed.
ERROR 2008-05-27 16:30:45
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2008-05-27 16:30:47
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Full log of today is available at [http://pastebin.com/f43531f97]
Has anyone an idea how I can finish this installation?
Thx
DanieleIt seems that the system did not come up and thus the RFC call fails.
What´s the output of
dev_w0
dev_disp
(in the ...work directory)?
Markus -
Error in Phase Run ABAP report
Hi All,
We are running an installation on I5/OS for ERP 6.0 EHP5. Installation is stucked at phase Run ABAP reports where it is trying to run RSWBOINS report and giving an error SQL error -7008. Log says ddic user is not able to login in the system and RFC all fails. However system is up and running fine.
I checked number of notes 116192 but it did not help. One note says to upgrade the database library and we did the same but issue still remains. Anyone phase similar errors, Please suggest.
Thanks
SunnyHi Sunny,
it sounds like some tables are not journaled. You may want to try to run AS4FIXFILE DBLIB(R3<sid>DATA) STRJRN(*YES).
If that does not help, I suggest to check SAP note 1387754, and to try the workaround described there, or to get the newest version of AS4FXIFILE and to try to run it again.
Best regards,
Dorothea Stein
Maybe you are looking for
-
i have one computer with two ipods to plug into it...only my ipod will plug in...the other persons ipod wont work and cannot creat a separate playlist from mine and cannot get music to download onto it....i have different music i want on mine and we
-
Is anyone aware of an on-line teleconference provider that allows attendees to see a Keynote presentation in PLAY mode? Go-to-meeting doesn't have program-specific options for the Mac so all they can see is the desktop - even when Keynote is in full
-
Up Grading to Iphoto and accessing a Iphoto 6 library
Hello all I recently upgraded to Leopard Since I was also upgrading my hard drive in my g4 PB I did the upgrade by installing a new HD in the PB , installing Leopard and then using migrate to bring the data from the old hard drive that I had installe
-
Having trouble opening jpeg files in iphone mail. Is there a setting I need to change?
I am not able to open a jpeg attachment in an email sent to my iPhone 4. Any suggestions? Thanks.
-
Dynamic Link Workflow w/ Premiere
In CS6, I am working a Premiere project, but I want to make a title in After Effects. So I have a title in AE dynamically linked to Premiere. Now, I want to bring the Premiere sequence into AE to work out some timing issues, but encountered an error