ABAP ROUTINE AT INFOPACKAGE FOR DATE RANGE

hi all,
I want to Schedule my infopackge with selection options
0DATE infoobject with First date of current month( 01.02.2008) to last date of current month ( 29.02.2008).
this i have to get automatically bcoz i have to use this in process chain.
so I want to write a routine for this at the infopackage level with ABAP Routine -6 option.
So please suggest me how to write the code for this case.
thanks,
kiran manyam.

Hi Kiran,
Please paste the following code there and also check for syntax error.
data first_date type d.
data last_date type d.
first_date = sy_datum.
first_dat+6(2) = '01'.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
Exporting
DAY_IN = first_date
Importing
LAST_DAY_OF_MONTH = last_date.
          read table l_t_range with key
               fieldname = 'DATE'.
           if sy-subrc = 0.
               l_idx = sy-tabix.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               modify l_t_range index l_idx.
            else.
               move 'DATE' to l_t_range-fieldname.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               append l_t_range.
               endloop.
            endif.
          p_subrc = 0.

Similar Messages

ABAP Routine in InfoPackage for selection

Hello,
I have 2 InfoPackages for loading from ODS1 to ODS2. InfoPackage 1 is restricted via ABAP Routine to load only certain customer numbers.
InfoPackage 2 is supposed to load all other customer numbers - therefore the ABAP Routine makes ranges that exclude the customer numbers selected in InfoPackage 1.
Now I face the fact that the selection of InfoPackage 2 is much to small in numbers. Problem is, the ranges only work when entered manually - but via ABAP entry these ranges don`t work. I can`t understand why this problem happens. Do you have an idea?
Example (first number is from, 2nd number is to)
InfoPackage 1: customer numbers
5| 5
100|100
999|999
InfoPackage 2: customer numbers
0|4
4|99
101|998
1000|99999
But selection of InfoPackage 2 does not work propberly...
Thanks for your help,
Angelika

Hi,
no, that was just a typing mistake. Sorry.
The problem is, that in Monitoring I can see the selection and it looks good.
But when I check the number of datasets selected it is far to small. Therefore I don`t believe the selection works.
I tried manually to put all the ranges selected by ABAP Routine in InfoPackage 2 in another InfoPackage 3 - the selection is identically to InfoPackage 2 (but not made via ABAP, but manually) and in Monitoring the selection looks absolutly alike.
But the manuall InfoPackage 3 selects far more records than InfoPackage 2.
I can`t understand the problem. Can you? Can you give me advice?
Thanks,
Angelika

InfoPackage ABAP Routine for Date Range - Only Start Date Extracted

I am using an ABAP Routine in an InfoPackage to select data for a 2 year period. The routine converts SY-DATUM into the Current Fiscal Year and Period, and then calculates the Starting and Ending Fiscal Year / Period of a 24 month period. The Start and End values are passed to the InfoPackage as l_t_range-low and l_t_range-high.
The Source and Target are both Basic Infocubes.
The InfoPackage executes successfully, and the Selection values on the Header tab of the monitor reflect a 24 month period. Unfortunately, on closer review of the data in the cube, only data for the first month appears to have been loaded. Im guessing that the extract was only performed with the From value, even though a To value was also provided.
I created a simple Infopackage and manually input the selection parameter values just to be sure I wasnt overlooking something. The InfoPackage performed as expected, loading more data which spanned the selection time period.
I can provide the code if it helps, but the fact that the monitor reflects a Start and End value suggests that the problem is with the InfoPackage, not the ABAP routine.
Has anybody ever experienced this before ? Any ideas would be greatly appreciated ?
Thanks,
Lyle

We can write ABAP routine in Infopackage with a range of values (From & To). Make sure you fill all the following information while building the final range information as below,
   l_s_range-sign    = 'I'.
   l_s_range-option = 'BT'.
   l_s_range-low     = lowvalue.
   l_s_range-high    = highvalue.
MODIFY l_t_range FROM l_s_range INDEX l_idx.
As you can see the key is passing the "BT" information for capturing range.
Hope it helps..
thanks
Kumar

How debug a routine created in InfoPackage for Data selection ?

Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.

Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps...

How debug a routine create in InfoPackage for Data selection ?

Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.

Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps...

ABAP code for Date Range

Hi All,
I have requirement to write code for date range.
Characterstic = Run-Out Date, it was created reference to 0Date.
Requirement is data should load depends on Run-Out Date 7 days old and 14 days future.
Logic is -7 days old >= Run_out date <= 14 days future.
please let me know how I need to proceed with ABAP code for this requirement.
Thanks.
Please do not ask for ABAP code here. Its not a training forum
Edited by: Pravender on Aug 18, 2011 1:46 AM

>
Sree vignesh wrote:
> Hi,
> In the select option we have a field month range as
> SELECT-OPTION : FROM 01.2007       TO 01.2009 " Let say Ur Selection option is SO_MONTH
> but now i need to add the DMBTR field considering the month range in the SELECT OPTION i.e., only FROM 01.2007 TO 01.2009 i mean without 2006 data.
>
> LOOP AT LT_DATA WHERE month in SO_MONTH. " Here add a Where condition
>     ls_output-matnr = lt_data-belnr.
>     ls_output-werks = lt_data-bukrs.
>     ls_output-lgort = lt_data-dmbtr.
>
>     COLLECT ls_output INTO lt_output .
>
>   ENDLOOP.
>
> please help with code .
>
> thanks in advance.
Regards,
Suneel G

ABAP routine in infopackage that runs function in ECC

Hi All
I need to have dynamic filter in the info package
I have program in ECC that brings me the value that I need to filter in my info packege
I want to use ABAP routine in infopackage that runs function in ECC and brings the value that was received from the ECC function
Is that possible?
Thanks

Hi All
my CTO found the following option
function module that is "remote-enabled module "
then you call CALL FUNCTION 'Y_FM_IDOC_CATSDB' DESTINATION 'SAP4.7E'
you need to define it in SM59
code example
data: BEGIN OF IT_SOBSL OCCURS 0,
      SOBSL(2),
      END OF IT_SOBSL.
DATA: ls_range type STANDARD TABLE OF rssdlrange WITH HEADER LINE.
SELECT /BIC/ZSPEPROCI FROM /BIC/SZSPEPROCI INTO TABLE IT_SOBSL
                      WHERE /BIC/ZSPEPROCI NOT BETWEEN 'AA' AND 'ZZ'
                      AND /bic/zspeproci ne '' .
BREAK-POINT.
LOOP AT IT_SOBSL.
ls_range-IOBJNM = 'SOBSL'.
ls_range-LOW = IT_SOBSL-SOBSL.
ls_range-SIGN = 'I'.
ls_range-OPTION = 'EQ'.
APPEND ls_range .
ENDLOOP.
loop at ls_range.
append ls_range to l_t_range.
endloop.

ABAP routine at Infopackage selection options

Dear all,
I need to write ABAP Routine at InfoPackage Selection Options.
Requirement is to bring only the versions (contains 2 characters) starting with 'C'.
Ex. I need versions CR, CP...
Code template is the following:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'VERSB'.
l_idx = sy-tabix.
modify l_t_range index l_idx.
p_subrc = 0.
Can anybody help me to resolve this?
Regards

Hi,
here is an example:
DATA: string(40) TYPE c.
CONCATENATE 'C' '%' INTO string.
SELECT *
FROM /bi0/hwbs_elemt
INTO TABLE lt_hwbs_elemt
WHERE nodename LIKE string.
Best regards,
Frank

Query to find first and last call made by selected number for date range

Hi,
query to find first and last call made by selected number for date range
according to filter:
mobile_no : 989.....
call_date_from : 25-april-2013
call_date_to : 26-april-2013
Please help

Hi,
It sounds like you want a Top-N Query , something like this:
WITH    got_nums   AS
     SELECT     table_x.*     -- or list columns wanted
     ,     ROW_NUMBER () OVER (ORDER BY call_date      ) AS a_num
     ,     ROW_NUMBER () OVER (ORDER BY call_date DESC) AS d_num
     FROM     table_x
     WHERE     mobile_no     = 989
     AND     call_date     >= DATE '2013-04-25'
     AND     call_date     < DATE '2013-04-26' + 1
SELECT *     -- or list all columns except a_num and d_num
FROM     got_nums
WHERE     1     IN (a_num, d_num)
;This forum is devoted to the SQL*Plus and iSQL*Plus front ends. This question doesn't have anything to do with any front end, does it? In the future, you'll get better response if you post questions like this in the PL/SQL.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the SQL forum FAQ {message:id=9360002}

Forum search doesn't seem to work for Date Range 'ALL'

Hi there,
Forum search doesn't seem to work for Date Range option: 'ALL' .
For a given search criteria, I get few search results when the date range is chosen as 'last year', but for the same search criteria, when the date range is chosen as ALL, no search results are shown (not even the ones shown earlier for last year selection).
regards,
AJ

Can you please delete my few duplicate replies in [CJ20n|Re: Long Text at Activity Level in CJ20N] thread?:-)
Cheers,
Amit.

Which BW variable is used for date(range) when creating a portal service

Hi,
Can any one please let me know which BW variable is to be used for date(range) when creating a portal service for searching based on dates.
Thanks
Abhai

Hi Arun,
its just a portal service which would be called when searching a document created on a particular date or betwwen a range of date.so what i require is which BW variable to be used when handling range.As for variable technical name we use VAR_NAME_I and for single value variable we VAR_VALUE_EXT_I
in the similar manner i want BW variable to be used for range of values.
Thanks
Abhai

Dynamic Date Value for Date Range Parameter - Scheduling in BI

Hi,
I am New to BO Enterprise XI R3. I want to schedule the Crystal report which takes Date Range as parameter. Is any option available to calculate From Date automatically based on Current Date based on the range required?
Currently, Parameter option accepts parameters and enterprise process the report for configured parameters. In this case, report always prints only for configured date range eventhough report generated after one month. I am expecting report has to print data for date range (eg. 1 weeks, 4 days, or any range) based on system current date.
Thanks in Advance,
Venkateswaran.P

I'm am in the same situation. I need to be able to have the date parameter dynamically change based on the current day's date when I schedule a report. However, because this parameter comes from a Stored Procedure from the database, it cannot be modified in the Report Designer (as far as I know). I've tried to set a default for it to use "currentdate" but it doesn't seem to take. Anyone know if this can be accomplished in the scheduler?
Thanks
-Tom

Query for date range? JE

Hi,
I have seem some posts on the JE forum regarding quering for date range, but it is mostly using DPL.
Is there any way to do that using the JE API
Thanks,
Mohammad

Hi Mohammad,
A date range query can be performed as a key range query. There's nothing special about dates except that you'll want to use a key binding that gives a meaningful sort order. If you're representing your dates in milliseconds, then a LongBinding (in com.sleepycat.bind.tuple) will work well. In general, use tuple bindings for keys, because they provide a meaningful sort order.
To perform a range query, this FAQ has some hints:
http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html#28
On range searches in general, they can be done with Cursor.getSearchKeyRange or with the SortedSet.subSet and SortedMap.subMap methods, depending on whether you are using the base API or the Collections API. It is up to you which to use.
If you use Cursor.getSearchKeyRange you'll need to call getNext to iterate through the results. You'll have to watch for the end range yourself by checking the key returned by getNext. This API does not have a way to enforce range end values automatically.
If you use the Collections API you can call subMap or subSet and get an Iterator on the resulting collection. That iterator will enforce both the beginning and the end of the range automatically.
Does this answer your question?
--mark

Call function in abap routine of infopackage

Experts,
Good day. I have a problem concerning the data to be imported in my ods.I can't find a similar thread corcerning my problem. My File date field should contain only 2 years and 3months data of recent data. I'm using a call function fima_date_create to filter values of zfile_date.
CALL FUNCTION 'FIMA_DATE_CREATE'
EXPORTING
    I_DATE                             = sy-datum
    I_FLG_END_OF_MONTH   = ' '
    I_YEARS                          = 2-
    I_MONTHS                        = 3-
    I_DAYS                             = 0
    I_CALENDAR_DAYS          = 0
    I_SET_LAST_DAY_OF_MONTH       = ' '
IMPORTING
    E_DATE                             =
    E_FLG_END_OF_MONTH   =
    E_DAYS_OF_I_DATE         =
The sy-datum becomes the High value and the date generated by this FM will be the low value. I already tested this function module and it is what i want. How Should I write the ABAP code for this in the abap routine for my infopackage? Or what steps do I need to take.

Hi,
When you choose the option to write a routine for one of the characteristics in the infopackage selections, you get a window to write your code with some prewritten code as below. Modify it as shown below, for your requirement.
data: l_idx like sy-tabix.
read table l_t_range with key
     fieldname = 'CALDAY'.
l_idx = sy-tabix.
START of YOUR CODE
<----
Required logic -
>
L_T_RANGE-LOW = <lower limit of range>.
L_T_RANGE-HIGH = <upper limit of range>.
     L_T_RANGE-SIGN = 'I'.
     L_T_RANGE-OPTION = 'BT'.
END of YOUR CODE
modify l_t_range index l_idx.
p_subrc = 0.
Hope this helps.

Need to write ABAP Routine at infopackage Selection Options

Hi All,
I need to write ABAP Routine at Info Package Selection Options.
Requiremnet i need to bring some Sales Document Types (Sales Orders Types) only from R/3.
Ex I need OrderTypes ZQT,ZSIV etc
Can any body help to resolve this.
Regards,
P.C.V.

Hi P.C.V,
If the order type field is already available in the Data Selection Tab of the InfoPackage, then you just need to place your selections there (e.g. order type = ZQT, ZSIV) without the need to use ABAP routines.
If ever you really need an ABAP routine, here is an example ABAP routine. The most important concept is to modify the range table l_t_range so that the selection reflect what you need.
data: l_idx like sy-tabix.
data: w_startdate like sy-datum,
      w_startweek like scal-week,
      w_maxdate like sy-datum,
      w_maxweek like scal-week.
w_startdate = sy-datum.
w_maxdate = w_startdate + 104 * 7.
* Calculate horizon for extraction
CALL FUNCTION 'DATE_GET_WEEK'
    EXPORTING
      DATE         = w_startdate
    IMPORTING
      WEEK         = w_startweek
    EXCEPTIONS
      DATE_INVALID = 1
      OTHERS       = 2.
CALL FUNCTION 'DATE_GET_WEEK'
    EXPORTING
      DATE         = w_maxdate
    IMPORTING
      WEEK         = w_maxweek
    EXCEPTIONS
      DATE_INVALID = 1
      OTHERS       = 2.
          read table l_t_range with key
               fieldname = 'CALWEEK'.
          l_idx = sy-tabix.
          l_t_range-sign = 'I'.
          l_t_range-option = 'BT'.
          l_t_range-low = w_startweek.
          l_t_range-high = w_maxweek.
          modify l_t_range index l_idx.

ABAP ROUTINE AT INFOPACKAGE FOR DATE RANGE

Similar Messages

Maybe you are looking for